Hugh Dickins reported the following

	My tmpfs swapping load (tweaked to use huge pages more heavily
	than in real life) is far from being a realistic load: but it was
	notably slowed down by your throttling mods in 5.16-rc, and this
	patch makes it well again - thanks.

	But: it very quickly hit NULL pointer until I changed that last
	line to

        if (first_pgdat)
                consider_reclaim_throttle(first_pgdat, sc);

The likely issue is that huge pages are a major component of the test
workload.  When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check

        if (IS_ENABLED(CONFIG_COMPACTION) &&
            sc->order > PAGE_ALLOC_COSTLY_ORDER &&
            compaction_ready(zone, sc)) {
                sc->compaction_ready = true;
                continue;
        }

If this was true for every zone in the zonelist, first_pgdat would never
get set resulting in a NULL pointer exception.

Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net
Fixes: 1b4e3f26

 ("mm: vmscan: Reduce throttling due to a failure to make progress")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time.  In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling.  In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.

Commit 69392a40 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse.  Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.

To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback.  If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly.  Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.

Alexey's original case was the most straight forward

	for i in {1..3}; do tail /dev/zero; done

On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.

Alexey's second test case added watching a youtube video while tail runs
10 times.  On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches.  With this
patch applies, the video plays similarly to 5.15.

[lkp@intel.com: Fix W=1 build warning]

Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/


Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 69392a40

 ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc mm fixes from Andrew Morton:
 "2 patches.

  Subsystems affected by this patch series: mm (userfaultfd and damon)"

* akpm:
  mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
  userfaultfd/selftests: fix hugetlb area allocations

Pull SCSI fixes from James Bottomley:
 "Three fixes, all in drivers. The lpfc one doesn't look exploitable,
  but nasty things could happen in string operations if mybuf ends up
  with an on stack unterminated string"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: vmw_pvscsi: Set residual data length conditionally
  scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()

DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').

Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed.  This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.

Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes: 4bc05954

 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:

  testing events (fork, remap, remove):
		ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)

The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved.  There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.

Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently.  The issue was uncovered by commit
8ba6e864 ("userfaultfd/selftests: reinitialize test context in each
test").

For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file.  This means that at mmap time, pages are
reserved for the src and dst areas.  At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area.  Then, a child is forked to fault in the dst area.  Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping.  The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.

Fix by not creating reserves for the dst area.  In this way the child
can use free (non-reserved) pages.

Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy.  The test does not do
this.  So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping.  There is no need to create a hugetlb file in the
non-shared case.

Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.com


Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "This is a bit bigger than I'd like, however it has two weeks of amdgpu
  fixes in it, since they missed last week, which was very small.

  The nouveau regression is probably the biggest fix in here, and it
  needs to go into 5.15 as well, two i915 fixes, and then a scattering
  of amdgpu fixes. The biggest fix in there is for a fencing NULL
  pointer dereference, the rest are pretty minor.

  For the misc team, I've pulled the two misc fixes manually since I'm
  not sure what is happening at this time of year!

  The amdgpu maintainers have the outstanding runpm regression to fix
  still, they are just working through the last bits of it now.

  Summary:

  nouveau:
   - fencing regression fix

  i915:
   - Fix possible uninitialized variable
   - Fix composite fence seqno icrement on each fence creation

  amdgpu:
   - Fencing fix
   - XGMI fix
   - VCN regression fix
   - IP discovery regression fixes
   - Fix runpm documentation
   - Suspend/resume fixes
   - Yellow Carp display fixes
   - MCLK power management fix
   - dma-buf fix"

* tag 'drm-fixes-2021-12-31' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
  drm/amd/display: Fix USB4 null pointer dereference in update_psp_stream_config
  drm/amd/display: Set optimize_pwr_state for DCN31
  drm/amd/display: Send s0i2_rdy in stream_count == 0 optimization
  drm/amd/display: Added power down for DCN10
  drm/amd/display: fix B0 TMDS deepcolor no dislay issue
  drm/amdgpu: no DC support for headless chips
  drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
  drm/amdgpu: always reset the asic in suspend (v2)
  drm/amd/pm: skip setting gfx cgpg in the s0ix suspend-resume
  drm/i915: Increment composite fence seqno
  drm/i915: Fix possible uninitialized variable in parallel extension
  drm/amdgpu: fix runpm documentation
  drm/nouveau: wait for the exclusive fence after the shared ones v2
  drm/amdgpu: add support for IP discovery gc_info table v2
  drm/amdgpu: When the VCN(1.0) block is suspended, powergating is explicitly enabled
  drm/amd/pm: Fix xgmi link control on aldebaran
  drm/amdgpu: introduce new amdgpu_fence object to indicate the job embedded fence
  drm/amdgpu: fix dropped backing store handling in amdgpu_dma_buf_move_notify

This merges two fixes that haven't been sent to me yet, but I wanted to get in.

One amdgpu fix, but one nouveau regression fixer.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Make sure that finish_mount_kattr() is called after mount_kattr was
succesfully built in both the success and failure case to prevent
leaking any references we took when we built it.  We returned early if
path lookup failed thereby risking to leak an additional reference we
took when building mount_kattr when an idmapped mount was requested.

Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 9caccd41

 ("fs: introduce MOUNT_ATTR_IDMAP")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from.. Santa?

  No regressions on our radar at this point. The igc problem fixed here
  was the last one I was tracking but it was broken in previous
  releases, anyway. Mostly driver fixes and a couple of largish SMC
  fixes.

  Current release - regressions:

   - xsk: initialise xskb free_list_node, fixup for a -rc7 fix

  Current release - new code bugs:

   - mlx5: handful of minor fixes:

   - use first online CPU instead of hard coded CPU

   - fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'

   - fix skb memory leak when TC classifier action offloads are disabled

   - fix memory leak with rules with internal OvS port

  Previous releases - regressions:

   - igc: do not enable crosstimestamping for i225-V models

  Previous releases - always broken:

   - udp: use datalen to cap ipv6 udp max gso segments

   - fix use-after-free in tw_timer_handler due to early free of stats

   - smc: fix kernel panic caused by race of smc_sock

   - smc: don't send CDC/LLC message if link not ready, avoid timeouts

   - sctp: use call_rcu to free endpoint, avoid UAF in sock diag

   - bridge: mcast: add and enforce query interval minimum

   - usb: pegasus: do not drop long Ethernet frames

   - mlx5e: fix ICOSQ recovery flow for XSK

   - nfc: uapi: use kernel size_t to fix user-space builds"

* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  fsl/fman: Fix missing put_device() call in fman_port_probe
  selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
  Documentation: fix outdated interpretation of ip_no_pmtu_disc
  net/ncsi: check for error return from call to nla_put_u32
  net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
  net: fix use-after-free in tw_timer_handler
  selftests: net: Fix a typo in udpgro_fwd.sh
  selftests/net: udpgso_bench_tx: fix dst ip argument
  net: bridge: mcast: add and enforce startup query interval minimum
  net: bridge: mcast: add and enforce query interval minimum
  ipv6: raw: check passed optlen before reading
  xsk: Initialise xskb free_list_node
  net/mlx5e: Fix wrong features assignment in case of error
  net/mlx5e: TC, Fix memory leak with rules with internal port
  ionic: Initialize the 'lif->dbid_inuse' bitmap
  igc: Fix TX timestamp support for non-MSI-X platforms
  igc: Do not enable crosstimestamping for i225-V models
  net/smc: fix kernel panic caused by race of smc_sock
  net/smc: don't send CDC/LLC message if link not ready
  NFC: st21nfca: Fix memory leak in device probe and remove
  ...

Pull char/misc fixes from Greg KH:
 "Here are two misc driver fixes for 5.16-final:

   - binder accounting fix to resolve reported problem

   - nitro_enclaves fix for mmap assert warning output

  Both of these have been for over a week with no reported issues"

* tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert
  binder: fix async_free_space accounting for empty parcels

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.16 to resolve some reported
  problems:

   - mtu3 driver fixes

   - typec ucsi driver fix

   - xhci driver quirk added

   - usb gadget f_fs fix for reported crash

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: ucsi: Only check the contract if there is a connection
  xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.
  usb: mtu3: set interval of FS intr and isoc endpoint
  usb: mtu3: fix list_head check warning
  usb: mtu3: add memory barrier before set GPD's HWO
  usb: mtu3: fix interval value for intr and isoc
  usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.

Fixes: 18a6c85f

 ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

udpgro_fwd.sh output following message:
  ping: 2001:db8:1::100: Address family for hostname not supported

Using ping6 when pinging IPv6 addresses.

Fixes: a062260a

 ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The updating way of pmtu has changed, but documentation is still in the
old way. So this patch updates the interpretation of ip_no_pmtu_disc and
min_pmtu.

See commit 28d35bcd

 ("net: ipv4: don't let PMTU updates increase
route MTU")

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'amd-drm-fixes-5.16-2021-12-29' of https://gitlab.freedesktop.org/agd5f/linux

 into drm-fixes

amd-drm-fixes-5.16-2021-12-29:

amdgpu:
- Fencing fix
- XGMI fix
- VCN regression fix
- IP discovery regression fixes
- Fix runpm documentation
- Suspend/resume fixes
- Yellow Carp display fixes
- MCLK power management fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229155129.5789-1-alexander.deucher@amd.com

Saeed Mahameed says:

====================
mlx5 fixes 2021-12-28

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Fix wrong features assignment in case of error
  net/mlx5e: TC, Fix memory leak with rules with internal port
====================

Link: https://lore.kernel.org/r/20211229065352.30178-1-saeed@kernel.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'drm-intel-fixes-2021-12-29' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-fixes

drm/i915 fixes for v5.16:
- Fix possible uninitialized variable
- Fix composite fence seqno icrement on each fence creation

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h7ark5r5.fsf@intel.com

As we can see from the comment of the nla_put() that it could return
-EMSGSIZE if the tailroom of the skb is insufficient.
Therefore, it should be better to check the return value of the
nla_put_u32 and return the error code if error accurs.
Also, there are many other functions have the same problem, and if this
patch is correct, I will commit a new version to fix all.

Fixes: 955dc68c

 ("net/ncsi: Add generic netlink family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We need to first check if the context is a vlan one, then we need to
check the global bridge multicast vlan snooping flag, and finally the
vlan's multicast flag, otherwise we will unnecessarily enable vlan mcast
processing (e.g. querier timers).

Fixes: 7b54aaaf

 ("net: bridge: multicast: add vlan state initialization and control")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20211228153142.536969-1-nikolay@nvidia.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A real world panic issue was found as follow in Linux 5.4.

    BUG: unable to handle page fault for address: ffffde49a863de28
    PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0
    RIP: 0010:tw_timer_handler+0x20/0x40
    Call Trace:
     <IRQ>
     call_timer_fn+0x2b/0x120
     run_timer_softirq+0x1ef/0x450
     __do_softirq+0x10d/0x2b8
     irq_exit+0xc7/0xd0
     smp_apic_timer_interrupt+0x68/0x120
     apic_timer_interrupt+0xf/0x20

This issue was also reported since 2017 in the thread [1],
unfortunately, the issue was still can be reproduced after fixing
DCCP.

The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net
namespace is destroyed since tcp_sk_ops is registered befrore
ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops
in the list of pernet_list. There will be a use-after-free on
net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net
if there are some inflight time-wait timers.

This bug is not introduced by commit f2bf415c ("mib: add net to
NET_ADD_STATS_BH") since the net_statistics is a global variable
instead of dynamic allocation and freeing. Actually, commit
61a7e260 ("mib: put net statistics on struct net") introduces
the bug since it put net statistics on struct net and free it when
net namespace is destroyed.

Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug
and replace pr_crit() with panic() since continuing is meaningless
when init_ipv4_mibs() fails.

[1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1

Fixes: 61a7e260

 ("mib: put net statistics on struct net")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

$rvs -> $rcv

Fixes: a062260a

 ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/d247d7c8-a03a-0abf-3c71-4006a051d133@163.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.

This will cause test case "multiple GRO socks" failed in udpgro.sh.

Setup sockaddr after parsing all arguments.

Fixes: 3a687bef

 ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Nikolay Aleksandrov says:

====================
net: bridge: mcast: add and enforce query interval minimum

This set adds and enforces 1 second minimum value for bridge multicast
query and startup query intervals in order to avoid rearming the timers
too often which could lock and crash the host. I doubt anyone is using
such low values or anything lower than 1 second, so it seems like a good
minimum. In order to be compatible if the value is lower then it is
overwritten and a log message is emitted, since we can't return an error
at this point.

Eric, I looked for the syzbot reports in its dashboard but couldn't find
them so I've added you as the reporter.

I've prepared a global bridge igmp rate limiting patch but wasn't
sure if it's ok for -net. It adds a static limit of 32k packets per
second, I plan to send it for net-next with added drop counters for
each bridge so it can be easily debugged.

Original report can be seen at:
https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
====================

Link: https://lore.kernel.org/r/20211227172116.320768-1-nikolay@nvidia.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As reported[1] if startup query interval is set too low in combination with
large number of startup queries and we have multiple bridges or even a
single bridge with multiple querier vlans configured we can crash the
machine. Add a 1 second minimum which must be enforced by overwriting the
value if set lower (i.e. without returning an error) to avoid breaking
user-space. If that happens a log message is emitted to let the admin know
that the startup interval has been set to the minimum. It doesn't make
sense to make the startup interval lower than the normal query interval
so use the same value of 1 second. The issue has been present since these
intervals could be user-controlled.

[1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/

Fixes: d902eee4

 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As reported[1] if query interval is set too low and we have multiple
bridges or even a single bridge with multiple querier vlans configured
we can crash the machine. Add a 1 second minimum which must be enforced
by overwriting the value if set lower (i.e. without returning an error) to
avoid breaking user-space. If that happens a log message is emitted to let
the administrator know that the interval has been set to the minimum.
The issue has been present since these intervals could be user-controlled.

[1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/

Fixes: d902eee4

 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a check that the user-provided option is at least as long as the
number of bytes we intend to read. Before this patch we would blindly
read sizeof(int) bytes even in cases where the user passed
optlen<sizeof(int), which would potentially read garbage or fault.

Discovered by new tests in https://github.com/google/gvisor/pull/6957

 .

The original get_user call predates history in the git repo.

Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull s390 fix from Heiko Carstens:

 - fix s390 mcount regex typo in recordmcount.pl

* tag 's390-5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  recordmcount.pl: fix typo in s390 mcount regex

This commit initialises the xskb's free_list_node when the xskb is
allocated. This prevents a potential false negative returned from a call
to list_empty for that node, such as the one introduced in commit
199d983b ("xsk: Fix crash on double free in buffer pool")

In my environment this issue caused packets to not be received by
the xdpsock application if the traffic was running prior to application
launch. This happened when the first batch of packets failed the xskmap
lookup and XDP_PASS was returned from the bpf program. This action is
handled in the i40e zc driver (and others) by allocating an skbuff,
freeing the xdp_buff and adding the associated xskb to the
xsk_buff_pool's free_list if it hadn't been added already. Without this
fix, the xskb is not added to the free_list because the check to determine
if it was added already returns an invalid positive result. Later, this
caused allocation errors in the driver and the failure to receive packets.

Fixes: 199d983b ("xsk: Fix crash on double free in buffer pool")
Fixes: 2b43470a

 ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In case of an error in mlx5e_set_features(), 'netdev->features' must be
updated with the correct state of the device to indicate which features
were updated successfully.
To do that we maintain a copy of 'netdev->features' and update it after
successful feature changes, so we can assign it to back to
'netdev->features' if needed.

However, since not all netdev features are handled by the driver (e.g.
GRO/TSO/etc), some features may not be updated correctly in case of an
error updating another feature.

For example, while requesting to disable TSO (feature which is not
handled by the driver) and enable HW-GRO, if an error occurs during
HW-GRO enable, 'oper_features' will be assigned with 'netdev->features'
and HW-GRO turned off. TSO will remain enabled in such case, which is a
bug.

To solve that, instead of using 'netdev->features' as the baseline of
'oper_features' and changing it on set feature success, use 'features'
instead and update it in case of errors.

Fixes: 75b81ce7

 ("net/mlx5e: Don't override netdev features field unless in error flow")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix a memory leak with decap rule with internal port as destination
device. The driver allocates a modify hdr action but doesn't set
the flow attr modify hdr action which results in skipping releasing
the modify hdr action when releasing the flow.

backtrace:
    [<000000005f8c651c>] krealloc+0x83/0xd0
    [<000000009f59b143>] alloc_mod_hdr_actions+0x156/0x310 [mlx5_core]
    [<000000002257f342>] mlx5e_tc_match_to_reg_set_and_get_id+0x12a/0x360 [mlx5_core]
    [<00000000b44ea75a>] mlx5e_tc_add_fdb_flow+0x962/0x1470 [mlx5_core]
    [<0000000003e384a0>] __mlx5e_add_fdb_flow+0x54c/0xb90 [mlx5_core]
    [<00000000ed8b22b6>] mlx5e_configure_flower+0xe45/0x4af0 [mlx5_core]
    [<00000000024f4ab5>] mlx5e_rep_indr_offload.isra.0+0xfe/0x1b0 [mlx5_core]
    [<000000006c3bb494>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
    [<00000000d3dac2ea>] tc_setup_cb_add+0x1d2/0x420

Fixes: b16eb3c8

 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-12-28

This series contains updates to igc driver only.

Vinicius disables support for crosstimestamp on i225-V as lockups are being
observed.

James McLaughlin fixes Tx timestamping support on non-MSI-X platforms.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  igc: Fix TX timestamp support for non-MSI-X platforms
  igc: Do not enable crosstimestamping for i225-V models
====================

Link: https://lore.kernel.org/r/20211228182421.340354-1-anthony.l.nguyen@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When allocated, this bitmap is not initialized. Only the first bit is set a
few lines below.

Use bitmap_zalloc() to make sure that it is cleared before being used.

Fixes: 6461b446

 ("ionic: Add interrupts and doorbells")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[WHY]
Current implementation of pipe split policy prevents pipe split with
multiple displays connected, which caused the MCLK speed to be stuck at
max

[HOW]
Changed the pipe split policies so that pipe split is allowed for
multi-display configurations

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1522
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1709
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1655
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403



Note this is a backport of this commit from amdgpu drm-next for 5.16.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Angus Wang <angus.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
A porting error on a previous patch left the block of code that
causes the crash from a NULL pointer dereference.

More specifically, we try to access link_enc before it's assigned in
the USB4 case in the following assignment:

config.dio_output_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A;

[How]
That assignment occurs later depending on the ASIC version. It's only
needed on DCN31 and only after link_enc is already assigned.

Fixes: 98643044

 ("drm/amd/display: fix a crash on USB4 over C20 PHY")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We'll exit optimized power state to do link detection but we won't enter
back into the optimized power state.

This could potentially block s2idle entry depending on the sequencing,
but it also means we're losing some power during the transition period.

[How]
Hook up the handler like DCN21. It was also missed like the
exit_optimized_pwr_state callback.

Fixes: 64b1d0e8

 ("drm/amd/display: Add DCN3.1 HWSEQ")

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Otherwise SMU won't mark Display as idle when trying to perform s2idle.

[How]
Mark the bit in the dcn31 codepath, doesn't apply to older ASIC.

It needed to be split from phy refclk off to prevent entering s2idle
when PSR was engaged but driver was not ready.

Fixes: 118a3315

 ("drm/amd/display: Add DCN3.1 clock manager support")

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The change of setting a timer callback on boot for 10 seconds is still
working, just lacked power down for DCN10.

[How]
Added power down for DCN10.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
B0 PHY C map to F, D map to G driver use logic instance, dmub does the
remap. Driver still need use the right PHY instance to access right HW.

[how]
use phyical instance when program PHY register.

[note]
could move resync_control programming to dmub next.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull selinux fix from Paul Moore:
 "One more small SELinux patch to address an uninitialized stack
  variable"

* tag 'selinux-pr-20211228' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: initialize proto variable in selinux_ip_postroute_compat()