Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727164148.385476-1-krzysztof.kozlowski@linaro.org

Id and schema fields do not need quotes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115748.101015-3-krzysztof.kozlowski@linaro.org

string literals do not need quotes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115748.101015-2-krzysztof.kozlowski@linaro.org

Id and schema fields do not need quotes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726115748.101015-1-krzysztof.kozlowski@linaro.org

Allow 'iommu-map', 'iommu-map-mask', and 'msi-parent' properties for
generic host. This fixes unevaluated property warnings on Arm Juno, AMD
Seattle, and FSL LS1028a.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220728175137.1172841-1-robh@kernel.org

The commit 649cab56 (“of: properly check for error returned
by fdt_get_name()”) changed the return value type from bool to int,
but forgot to change the return value simultaneously.

populate_node was only called in unflatten_dt_nodes, and returns
with values greater than or equal to 0 were discarded without further
processing. Considering that return 0 usually indicates success,
return 0 instead of return true.

Fixes: 649cab56 (“of: properly check for error returned by fdt_get_name()”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220801120506.11461-2-xuqiang36@huawei.com

Correct all uses of "it's" that are meant to be possessive "its".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220801025221.30563-1-rdunlap@infradead.org

Convert emac_rockchip.txt to YAML.

Changes against original bindings:
  Add mdio sub node.
  Add extra clock for rk3036

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220603163539.537-1-jbx6244@gmail.com

Move the Atmel/Microchip 93xx46 SPI compatible EEPROM family bindings
from misc to eeprom directory to properly match subsystem.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727164424.386499-2-krzysztof.kozlowski@linaro.org

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727164424.386499-1-krzysztof.kozlowski@linaro.org

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

The sitronix,st7735r references also panel-common.yaml and lists
explicitly allowed properties, thus here reference only
spi-peripheral-props.yaml for purpose of documenting the SPI slave
device and bringing spi-max-frequency type validation.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727164312.385836-1-krzysztof.kozlowski@linaro.org

Convert the Qualcomm PM8916 watchdog timer controller bindings to DT
schema and include them in parent device schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726120215.101868-3-krzysztof.kozlowski@linaro.org

Absolute path to other DT schema is preferred over relative one.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220726120215.101868-2-krzysztof.kozlowski@linaro.org

'output-range-microvolts' is missing a type definition. '-microvolts' is
not a standard unit (should be '-microvolt'). As the property is already
in use, add a type reference.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220719215152.1877776-1-robh@kernel.org

'cm-battery-stat' is missing a type definition and is not a common
property. The type is boolean.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220719215017.1875530-1-robh@kernel.org

'video-mode' is missing a type definition and is not a common property. The
type is 'uint32'.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220719215201.1877997-1-robh@kernel.org

As of commit 18250b43 ("of: fdt: Remove
early_init_dt_reserve_memory_arch() override capability") this is
no longer an arch hook, so rename it to remove the confusing _arch
suffix. Also remove some unnecessary indirection from all but one of
the callers by calling memblock_reserve() directly instead.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I3362bdd92ae6e47e8f5bac01aa228d32f9d01aad


Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220723015331.1607029-1-pcc@google.com

'reset-gpio-active-high' is missing a type definition and is not a common
property. The type is boolean.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20220719215031.1875860-1-robh@kernel.org

Document the bindings for the EM Microelectronic EM3027 RTC.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220617114420.1398259-2-thierry.reding@gmail.com

Convert the DS1307 (and compatible) RTC bindings from the free-form text
format to json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220617114420.1398259-1-thierry.reding@gmail.com

Convert Qualcomm BAM DMA controller binding to DT schema format using
json schema.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
[robh: add back SoC mapping to compatible strings]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220417210436.6203-7-singh.kuldeep87k@gmail.com

Densitron is a manufacturer of LCD panels.
https://www.densitron.com



Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220721030327.210950-1-marex@denx.de

Fix typo in the comment

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220721011746.19663-1-slark_xiao@163.com

Add si-en compatibles for all chip variants and add conditionals
depending on compatibles to document variants specs:
- possible reg addresses
- whether audio-gain-db is supported or not
- maximum number of leds
- led-max-microamp values

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220712100841.1538395-3-vincent.knecht@mailoo.org

Convert leds-is31fl319x.txt to dtschema.
Set license to the one recommended by DT project
and set myself as maintainer.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220712100841.1538395-2-vincent.knecht@mailoo.org

Document the availability of an LPG configuration for the PM660L PMIC in
the Qualcomm Light Pulse Generator driver.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220719211848.1653920-1-marijn.suijten@somainline.org

Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings
to DT Schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220721160611.250274-1-krzysztof.kozlowski@linaro.org

The examples were mixing 4-space with 2- and 3-space indentations, so
correct them to use 4-space one.  No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220607075247.58048-2-krzysztof.kozlowski@linaro.org

The multi-led node defined address/size cells, so it is intended to have
children with unit addresses.

The second multi-led's reg property defined three LED indexes within one
reg item, which is not correct - these are three separate items.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220607075247.58048-1-krzysztof.kozlowski@linaro.org

It does not hurt to fill in the changeset id while the mutex is still
held.  After doing so, the function tails for the success and failure
cases become identical, so they can be unified.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/6a3357a8f7f29704350e3ffae768ee8a462b54d3.1657893306.git.geert+renesas@glider.be

There is no point in doing several preparatory steps in
of_overlay_fdt_apply(), only to see of_overlay_apply() return early
because of a corrupt device tree.

Move the check for a corrupt device tree from of_overlay_apply() to
of_overlay_fdt_apply(), to check for this as early as possible.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/c91ce7112eb5167ea46a43d8a980e76b920010ba.1657893306.git.geert+renesas@glider.be

There is no need to specify "minItems" if it equals to "maxItems".  On the
other hand number of items in an array can be specified via describing
items, which might bring some additional information.  This simplifies a
bit the binding.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220712154602.26994-1-krzysztof.kozlowski@linaro.org

We should use of_node_put() for the reference 'node' returned by
of_parse_phandle() which will increase the refcount.

Fixes: fec9b625 ("of: Add plumbing for restricted DMA pool")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220702014449.263772-1-windhl@126.com

On the ->remove() stage the callback uses physical device node instead of one
from GPIO chip and the variable name which is different to one used in
unittest_gpio_probe(). Make these consistent with unittest_gpio_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220708214539.7254-2-andriy.shevchenko@linux.intel.com

The OF node in the GPIO library is deprecated and soon will be removed.
GPIO library now accepts fwnode as a firmware node, so switch the module
to use it instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220708214539.7254-1-andriy.shevchenko@linux.intel.com

Convert the arm,arm-firmware-suite partition binding to DT schema
format. Simple conversion as there's only a compatible property.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220629185031.23826-1-robh@kernel.org

Cortex A78AE's MPIDR has been added since
commit 83bea32a ("arm64: Add part number for Arm Cortex-A78AE")
We also need to add the compatible.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220707082753.28862-1-chanho61.park@samsung.com

Fixed string property names should be under 'properties' rather than
'patternProperties'. Additionally, without beginning and end of line
anchors, any prefix or suffix is allowed on the specified property names.

As all the nvidia,tegra20-pmc powergates child node properties are fixed
strings, change 'patternProperties' to 'properties'.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220706212034.568861-1-robh@kernel.org

Document already used S5PV210 ChipID block.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220705154613.453096-2-krzysztof.kozlowski@linaro.org

Group devices like Chip ID or SoC information under "hwinfo" directory.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220705154613.453096-1-krzysztof.kozlowski@linaro.org