Pull input fixes from Dmitry Torokhov:
 "A fixup for the input_event fix for y2038 Sparc64, and couple other
  minor fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: input_event - fix the CONFIG_SPARC64 mixup
  Input: olpc_apsp - assign priv->dev earlier
  Input: uinput - fix undefined behavior in uinput_validate_absinfo()
  Input: raspberrypi-ts - fix link error
  Input: xpad - add support for SteelSeries Stratus Duo
  Input: input_event - provide override for sparc64

Pull networking fixes from David Miller:

 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.

 2) Integer overflow in ktime handling of bcm can code, from Oliver
    Hartkopp.

 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
    Horman.

 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.

 5) Use after free in ax25, from Eric Dumazet.

 6) Several fixes to the SSN support in SCTP, from Xin Long.

 7) Do not process frames after a NAPI reschedule in ibmveth, from
    Thomas Falcon.

 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
  qed: Revert error handling changes.
  cfg80211: extend range deviation for DMG
  cfg80211: reg: remove warn_on for a normal case
  mac80211: Add attribute aligned(2) to struct 'action'
  mac80211: don't initiate TDLS connection if station is not associated to AP
  nl80211: fix NLA_POLICY_NESTED() arguments
  ibmveth: Do not process frames after calling napi_reschedule
  net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
  net: usb: asix: ax88772_bind return error when hw_reset fail
  MAINTAINERS: Update cavium networking drivers
  net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
  net/mlx4_core: Add masking for a few queries on HCA caps
  sctp: set flow sport from saddr only when it's 0
  sctp: set chunk transport correctly when it's a new asoc
  sctp: improve the events for sctp stream adding
  sctp: improve the events for sctp stream reset
  ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
  ax25: fix possible use-after-free
  sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
  hv_netvsc: fix typos in code comments
  ...

Pull smb3 fixes from Steve French:
 "A set of small smb3 fixes, some fixing various crediting issues
  discovered during xfstest runs, five for stable"

* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
  smb3: add credits we receive from oplock/break PDUs
  CIFS: Fix mounts if the client is low on credits
  CIFS: Do not assume one credit for async responses
  CIFS: Fix credit calculations in compound mid callback
  CIFS: Fix credit calculation for encrypted reads with errors
  CIFS: Fix credits calculations for reads with errors
  CIFS: Do not reconnect TCP session in add_credits()
  smb3: Cleanup license mess
  CIFS: Fix possible hang during async MTU reads and writes
  cifs: fix memory leak of an allocated cifs_ntsd structure

Pull VFIO fixes from Alex Williamson:

 - cleanup licenses in new files (Thomas Gleixner)

 - cleanup new compiler warnings (Alexey Kardashevskiy)

* tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci/nvlink2: Fix ancient gcc warnings
  vfio/pci: Cleanup license mess

Pull SCSI fixes from James Bottomley:
 "Six fixes, all of which appear to have user visible consequences.

  The DMA one is a regression fix from the merge window and of the
  others, four are driver specific and one specific to the target code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Use explicit access size in ufshcd_dump_regs
  scsi: tcmu: fix use after free
  scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
  scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
  scsi: communicate max segment size to the DMA mapping code

Pull block fixes from Jens Axboe:
 "A collection of fixes for this release. This contains:

   - Silence sparse rightfully complaining about non-static wbt
     functions (Bart)

   - Fixes for the zoned comments/ioctl documentation (Damien)

   - direct-io fix that's been lingering for a while (Ernesto)

   - cgroup writeback fix (Tejun)

   - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)

   - Block recursion tracking fix (Ming)

   - Fix debugfs command flag naming for a few flags (Jianchao)"

* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
  block: Fix comment typo
  uapi: fix ioctl documentation
  blk-wbt: Declare local functions static
  blk-mq: fix the cmd_flag_name array
  nvme-multipath: drop optimization for static ANA group IDs
  nvmet-rdma: fix null dereference under heavy load
  nvme-rdma: rework queue maps handling
  nvme-tcp: fix timeout handler
  nvme-rdma: fix timeout handler
  writeback: synchronize sync(2) against cgroup writeback membership switches
  block: cover another queue enter recursion via BIO_QUEUE_ENTERED
  direct-io: allow direct writes to empty inodes

This is new code and not bug fixes.

This reverts all changes added by merge commit
8fb18be9



Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Ulf Hansson:

 - sdhci-acpi: Fixup build dependency for PCI

 - sdhci-omap: Resolve Kconfig warnings on keystone

 - sdhci-iproc: Propagate errors from DT parsing

 - meson-gx: Fixup IRQ handling in release callback

 - meson-gx: Use signal re-sampling to fixup tuning

 - dw_mmc-bluefield: Fix the license information

* tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc-bluefield: : Fix the license information
  mmc: meson-gx: enable signal re-sampling together with tuning
  mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
  mmc: meson-gx: Free irq in release() callback
  mmc: host: Fix Kconfig warnings on keystone_defconfig
  mmc: sdhci-acpi: Make PCI dependency explicit

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes to resolve some
  reported issues, as well as a number of binderfs fixups that were
  found after auditing the filesystem code by Al Viro. As binderfs
  hasn't been in a previous release yet, it's good to get these in now
  before the first users show up.

  All of these have been in linux-next for a bit with no reported
  issues"

* tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
  binderfs: switch from d_add() to d_instantiate()
  binderfs: drop lock in binderfs_binder_ctl_create
  binderfs: kill_litter_super() before cleanup
  binderfs: rework binderfs_binder_device_create()
  binderfs: rework binderfs_fill_super()
  binderfs: prevent renaming the control dentry
  binderfs: remove outdated comment
  binderfs: use __u32 for device numbers
  binderfs: use correct include guards in header
  misc: pvpanic: fix warning implicit declaration
  char/mwave: fix potential Spectre v1 vulnerability
  misc: ibmvsm: Fix potential NULL pointer dereference
  binderfs: fix error return code in binderfs_fill_super()
  mei: me: add denverton innovation engine device IDs
  mei: me: mark LBG devices as having dma support
  mei: dma: silent the reject message
  binderfs: handle !CONFIG_IPC_NS builds
  binderfs: reserve devices for initial mount
  binderfs: rename header to binderfs.h
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.0-rc4.

  They resolve some reported bugs and add a new device id for one
  driver. Nothing major at all, but all good to have.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ion: Support cpu access during dma_buf_detach
  staging: rtl8723bs: Fix build error with Clang when inlining is disabled
  staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1
  staging: vchiq: Fix local event signalling
  Staging: wilc1000: unlock on error in init_chip()
  staging: wilc1000: fix memory leak in wilc_add_rx_gtk
  staging: wilc1000: fix registration frame size

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty core and serial driver fixes for
  5.0-rc4 to resolve some reported issues.

  Nothing major, the small serial driver fixes, a tty core fixup for a
  crash that was reported, and some good vt fixes from Nicolas Pitre as
  he seems to be auditing that chunk of code a lot lately.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
  tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
  tty: Handle problem if line discipline does not have receive_buf
  vgacon: unconfuse vc_origin when using soft scrollback
  vt: invoke notifier on screen size change
  vt: always call notifier with the console lock held
  vt: make vt_console_print() compatible with the unicode screen buffer
  tty/n_hdlc: fix __might_sleep warning
  serial: 8250: Fix serial8250 initialization crash
  uart: Fix crash in uart_write and uart_put_char

Pull USB/PHY fixes from Greg KH:
 "Here are a number of small USB and PHY driver fixes for 5.0-rc4.

  Nothing major at all, just the usual selection of USB gadget bugfixes,
  some new USB serial driver ids, some SPDX fixes, and some PHY driver
  fixes for reported issues.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: keyspan_usa: add proper SPDX lines for .h files
  USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
  USB: leds: fix regression in usbport led trigger
  usb: chipidea: fix static checker warning for NULL pointer
  MAINTAINERS: email address update in MAINTAINERS entries
  USB: usbip: delete README file
  USB: serial: pl2303: add new PID to support PL2303TB
  usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
  phy: ath79-usb: Fix the main reset name to match the DT binding
  phy: ath79-usb: Fix the power on error path
  phy: fix build breakage: add PHY_MODE_SATA
  phy: ti: ensure priv is not null before dereferencing it
  USB: serial: ftdi_sio: fix GPIO not working in autosuspend
  usb: gadget: Potential NULL dereference on allocation error
  usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
  usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup
  usb: dwc3: gadget: synchronize_irq dwc irq in suspend
  USB: serial: simple: add Motorola Tetra TPG2200 device id

Merge tag 'mac80211-for-davem-2019-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211



Johannes Berg says:

====================
Just a few small fixes:
 * avoid trying to operate TDLS when not connection,
   this is not valid and led to issues
 * count TTL-dropped frames in mesh better
 * deal with new WiGig channels in regulatory code
 * remove a WARN_ON() that can trigger due to benign
   races during device/driver registration
 * fix nested netlink policy maxattrs (syzkaller)
 * fix hwsim n_limits (syzkaller)
 * propagate __aligned(2) to a surrounding struct
 * return proper error in virt_wifi error path
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If there are simulatenous queries of regdb, then there might be a case
where multiple queries can trigger request_firmware_no_wait and can have
parallel callbacks being executed asynchronously. In this scenario we
might hit the WARN_ON.

So remove the warn_on, as the code already handles multiple callbacks
gracefully.

Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

During refactor in commit 9e478066

 ("mac80211: fix MU-MIMO
follow-MAC mode") a new struct 'action' was declared with packed
attribute as:

  struct {
          struct ieee80211_hdr_3addr hdr;
          u8 category;
          u8 action_code;
  } __packed action;

But since struct 'ieee80211_hdr_3addr' is declared with an aligned
keyword as:

  struct ieee80211_hdr {
  	__le16 frame_control;
  	__le16 duration_id;
  	u8 addr1[ETH_ALEN];
  	u8 addr2[ETH_ALEN];
  	u8 addr3[ETH_ALEN];
  	__le16 seq_ctrl;
  	u8 addr4[ETH_ALEN];
  } __packed __aligned(2);

Solve the ambiguity of placing aligned structure in a packed one by
adding the aligned(2) attribute to struct 'action'.

This removes the following warning (W=1):

  net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned]

Cc: Johannes Berg <johannes.berg@intel.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Following call trace is observed while adding TDLS peer entry in driver
during TDLS setup.

Call Trace:
[<c1301476>] dump_stack+0x47/0x61
[<c10537d2>] __warn+0xe2/0x100
[<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211]
[<c1053895>] warn_slowpath_null+0x25/0x30
[<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211]
[<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211]
[<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211]
[<c1876fe3>] nl80211_new_station+0x273/0x420
[<c170f6d9>] genl_rcv_msg+0x219/0x3c0
[<c170f4c0>] ? genl_rcv+0x30/0x30
[<c170ee7e>] netlink_rcv_skb+0x8e/0xb0
[<c170f4ac>] genl_rcv+0x1c/0x30
[<c170e8aa>] netlink_unicast+0x13a/0x1d0
[<c170ec18>] netlink_sendmsg+0x2d8/0x390
[<c16c5acd>] sock_sendmsg+0x2d/0x40
[<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0

Fixing this by allowing TDLS setup request only when we have completed
association.

Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

syzbot reported an out-of-bounds read when passing certain
malformed messages into nl80211. The specific place where
this happened isn't interesting, the problem is that nested
policy parsing was referring to the wrong maximum attribute
and thus the policy wasn't long enough.

Fix this by referring to the correct attribute. Since this
is really not necessary, I'll come up with a separate patch
to just pass the policy instead of both, in the common case
we can infer the maxattr from the size of the policy array.

Reported-by:  <syzbot+4157b036c5f4713b1f2f@syzkaller.appspotmail.com>
Cc: stable@vger.kernel.org
Fixes: 9bb7e0f2

 ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__bpf_redirect() and act_mirred checks this boolean
to determine whether to prefix an ethernet header.

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
 software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
 software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
 software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
 reg index 0x0000: -71
...

Signed-off-by: Zhang Run <zhang.run@zte.com.cn>
Reviewed-by: Yang Wei <yang.wei9@zte.com.cn>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Following Marvell's acquisition of Cavium, we need to update all the
Cavium drivers maintainer's entries to point to our new e-mail addresses.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ameen Rahman <Ameen.Rahman@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sasha Levin says:

====================
Hyper-V hv_netvsc commits for 5.0

Three patches from Haiyang Zhang to fix settings hash key using ethtool,
and Adrian Vladu's first patch fixing a few spelling mistakes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.0-20190122' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can



Marc Kleine-Budde says:

====================
pull-request: can 2019-01-22

this is a pull request of 4 patches for net/master.

The first patch by is by Manfred Schlaegl and reverts a patch that caused wrong
warning messages in certain use cases. The next patch is by Oliver Hartkopp for
the bcm that adds sanity checks for the timer value before using it to detect
potential interger overflows. The last two patches are for the flexcan driver,
YueHaibing's patch fixes the the return value in the error path of the
flexcan_setup_stop_mode() function. The second patch is by Uwe Kleine-König and
fixes a NULL pointer deref on older flexcan cores in flexcan_chip_start().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4_core fixes for 5.0-rc

This patchset includes two fixes for the mlx4_core driver.

First patch by Aya fixes inaccurate parsing of some FW fields, mistakenly
including additional (mostly reserved) bits.

Second patch by Jack fixes a wrong (yet harmless) error handling of
calls to copy_to_user() during the CQs init stage.

Series generated against net commit:
49a57857

 Linux 5.0-rc3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Procedure mlx4_init_user_cqes() handles returns by copy_to_user
incorrectly. copy_to_user() returns the number of bytes not copied.
Thus, a non-zero return should be treated as a -EFAULT error
(as is done elsewhere in the kernel). However, mlx4_init_user_cqes()
error handling simply returns the number of bytes not copied
(instead of -EFAULT).

Note, though, that this is a harmless bug: procedure mlx4_alloc_cq()
(which is the only caller of mlx4_init_user_cqes()) treats any
non-zero return as an error, but that returned error value is processed
internally, and not passed further up the call stack.

In addition, fixes the following sparse warning:
warning: incorrect type in argument 1 (different address spaces)
   expected void [noderef] <asn:1>*to
   got void *buf

Fixes: e4567897

 ("{net, IB}/mlx4: Initialize CQ buffers in the driver when possible")
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver reads the query HCA capabilities without the corresponding masks.
Without the correct masks, the base addresses of the queues are
unaligned.  In addition some reserved bits were wrongly read.  Using the
correct masks, ensures alignment of the base addresses and allows future
firmware versions safe use of the reserved bits.

Fixes: ab9c17a0 ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet")
Fixes: 0ff1fb65

 ("{NET, IB}/mlx4: Add device managed flow steering firmware API")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set
flow sport from 'saddr'. However, transport->saddr is set only when
transport->dst exists in sctp_transport_route().

If sctp_transport_pmtu() is called without transport->saddr set, like
when transport->dst doesn't exists, the flow sport will be set to 0
from transport->saddr, which will cause a wrong route to be got.

Commit 6e91b578 ("sctp: re-use sctp_transport_pmtu in
sctp_transport_route") made the issue be triggered more easily
since sctp_transport_pmtu() would be called in sctp_transport_route()
after that.

In gerneral, fl4->fl4_sport should always be set to
htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist
in sctp_v4/6_get_dst(), which is the case:

  sctp_ootb_pkt_new() ->
    sctp_transport_route()

For that, we can simply handle it by setting flow sport from saddr only
when it's 0 in sctp_v4/6_get_dst().

Fixes: 6e91b578

 ("sctp: re-use sctp_transport_pmtu in sctp_transport_route")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the paths:

  sctp_sf_do_unexpected_init() ->
    sctp_make_init_ack()
  sctp_sf_do_dupcook_a/b()() ->
    sctp_sf_do_5_1D_ce()

The new chunk 'retval' transport is set from the incoming chunk 'chunk'
transport. However, 'retval' transport belong to the new asoc, which
is a different one from 'chunk' transport's asoc.

It will cause that the 'retval' chunk gets set with a wrong transport.
Later when sending it and because of Commit b9fd6839 ("sctp: add
sctp_packet_singleton"), sctp_packet_singleton() will set some fields,
like vtag to 'retval' chunk from that wrong transport's asoc.

This patch is to fix it by setting 'retval' transport correctly which
belongs to the right asoc in sctp_make_init_ack() and
sctp_sf_do_5_1D_ce().

Fixes: b9fd6839

 ("sctp: add sctp_packet_singleton")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to improve sctp stream adding events in 2 places:

  1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM
     and in stream allocation failure checks, as the adding has to
     succeed after reconf_timer stops for the in stream adding
     request retransmission.

  3. In sctp_process_strreset_addstrm_in(), no event should be sent,
     as no in or out stream is added here.

Fixes: 50a41591 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter")
Fixes: c5c4ebb3

 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to improve sctp stream reset events in 4 places:

  1. In sctp_process_strreset_outreq(), the flag should always be set with
     SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in
     stream is reset here.
  2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN
     check, as the reset has to succeed after reconf_timer stops for the
     in stream reset request retransmission.
  3. In sctp_process_strreset_inreq(), no event should be sent, as no in
     or out stream is reset here.
  4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or
     OUTGOING event should always be sent for stream reset requests, no
     matter it fails or succeeds to process the request.

Fixes: 81054476 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter")
Fixes: 16e1a919 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter")
Fixes: 11ae76e6

 ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip l add dev tun type gretap key 1000
ip a a dev tun 10.0.0.1/24

Packets with tun-id 1000 can be recived by tun dev. But packet can't
be sent through dev tun for non-tunnel-dst

With this patch: tunnel-dst can be get through lwtunnel like beflow:
ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "Live from LCA pull, some fixes all over the place,

  i915:
   - GVT workload destruction fix

  msm:
   - A6XX opp-level fix
   - build fixes
   - hard-coded irq removal

  amdgpu:
   - overclocking fix
   - hybrid gfx fix

  sun4i:
   - fix TMDS clock usage"

* tag 'drm-fixes-2019-01-25-1' of git://anongit.freedesktop.org/drm/drm:
  drm/msm: avoid unused function warning
  drm/msm: Add __printf verification
  drm/msm: Fix A6XX support for opp-level
  drm/msm: honor GPU_READONLY flag
  drm/msm: drop interrupt-names
  drm/msm/gpu: Remove hardcoded interrupt name
  drm/msm/gpu: fix building without debugfs
  drm/i915/execlists: Mark up priority boost on preemption
  drm/i915/gvt: release shadow batch buffer and wa_ctx before destroy one workload
  drm/sun4i: hdmi: Fix usage of TMDS clock
  drm/amd/powerplay: OD setting fix on Vega10
  drm/amdgpu: Add APTX quirk for Lenovo laptop
  drm/msm: Unblock writer if reader closes file

A few fixes for v5.0.. the opp-level fix and removal of hard-coded irq
name is partially to make things smoother in v5.1 merge window to
avoid dependency on drm vs dt trees, but are otherwise sane changes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsAEHd2tGRQxRTs+A-8y_tthPs2iUgCCCEwR5vDMXab4A@mail.gmail.com

Merge tag 'drm-intel-fixes-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-fixes

drm/i915 fixes for v5.0-rc4:
- fix priority boost
- gvt: fix destroy of shadow batch and indirect ctx

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k1iu1a2e.fsf@intel.com

- Overclock fix for vega10
- Hybrid gfx laptop fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123231004.3111-1-alexander.deucher@amd.com

Was helpful in debug for some recent problems.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Otherwise we gradually leak credits leading to potential
hung session.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

If the server doesn't grant us at least 3 credits during the mount
we won't be able to complete it because query path info operation
requires 3 credits. Use the cached file handle if possible to allow
the mount to succeed.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

If we don't receive a response we can't assume that the server
granted one credit. Assume zero credits in such cases.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>