Pull rdma fixes from Jason Gunthorpe:
 "Not much too exciting here, although two syzkaller bugs that seem to
  have 9 lives may have finally been squashed.

  Several core bugs and a batch of driver bug fixes:

   - Fix compilation problems in qib and hfi1

   - Do not corrupt the joined multicast group state when using
     SEND_ONLY

   - Several CMA bugs, a reference leak for listening and two syzkaller
     crashers

   - Various bug fixes for irdma

   - Fix a Sleeping while atomic bug in usnic

   - Properly sanitize kernel pointers in dmesg

   - Two bugs in the 64b CQE support for hns"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Add the check of the CQE size of the user space
  RDMA/hns: Fix the size setting error when copying CQE in clean_cq()
  RDMA/hfi1: Fix kernel pointer leak
  RDMA/usnic: Lock VF with mutex instead of spinlock
  RDMA/hns: Work around broken constant propagation in gcc 8
  RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests
  RDMA/cma: Do not change route.addr.src_addr.ss_family
  RDMA/irdma: Report correct WC error when there are MW bind errors
  RDMA/irdma: Report correct WC error when transport retry counter is exceeded
  RDMA/irdma: Validate number of CQ entries on create CQ
  RDMA/irdma: Skip CQP ring during a reset
  MAINTAINERS: Update Broadcom RDMA maintainers
  RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure
  IB/cma: Do not send IGMP leaves for sendonly Multicast groups
  IB/qib: Fix clang confusion of NULL pointer comparison

Pull sound fixes from Takashi Iwai:
 "This became a slightly large collection of changes, partly because
  I've been off in the last weeks. Most of changes are small and
  scattered while a bit big change is found in HD-audio Realtek codec
  driver; it's a very device-specific fix that has been long wanted, so
  I decided to pick up although it's in the middle RC.

  Some highlights:

   - A new guard ioctl for ALSA rawmidi API to avoid the misuse of the
     new timestamp framing mode; it's for a regression fix

   - HD-audio: a revert of the 5.15 change that might work badly, new
     quirks for Lenovo Legion & co, a follow-up fix for CS8409

   - ASoC: lots of SOF-related fixes, fsl component fixes, corrections
     of mediatek drivers

   - USB-audio: fix for the PM resume

   - FireWire: oxfw and motu fixes"

* tag 'sound-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: pcsp: Make hrtimer forwarding more robust
  ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION
  ALSA: firewire-motu: fix truncated bytes in message tracepoints
  ASoC: SOF: trace: Omit error print when waking up trace sleepers
  ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX
  ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication
  ASoC: SOF: loader: release_firmware() on load failure to avoid batching
  ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack
  ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition
  ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types
  ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types
  ASoC: SOF: Fix DSP oops stack dump output contents
  ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.
  ALSA: usb-audio: Unify mixer resume and reset_resume procedure
  Revert "ALSA: hda: Drop workaround for a hang at shutdown again"
  ALSA: oxfw: fix transmission method for Loud models based on OXFW971
  ASoC: mediatek: common: handle NULL case in suspend/resume function
  ASoC: fsl_xcvr: register platform component before registering cpu dai
  ASoC: fsl_spdif: register platform component before registering cpu dai
  ASoC: fsl_micfil: register platform component before registering cpu dai
  ...

Pull crypto fixes from Herbert Xu:
 "This contains fixes for a resource leak in ccp as well as stack
  corruption in x86/sm4"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/sm4 - Fix frame pointer stack corruption
  crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()

Pull pin control fixes from Linus Walleij:
 "Some few pin control fixes for the v5.15 kernel cycle. The most
  critical is the AMD fixes.

   - Fix wakeup interrupts in the AMD driver affecting AMD laptops.

   - Fix parent irqspec translation in the Qualcomm SPMI GPIO driver.

   - Fix deferred probe handling in the Rockchip driver, this is a
     stopgap solution while we look for something more elegant.

   - Add PM suspend callbacks to the Qualcomm SC7280 driver.

   - Some minor doc fix (should have come in earlier, sorry)"

* tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: sc7280: Add PM suspend callbacks
  gpio/rockchip: fetch deferred output settings on probe
  pinctrl/rockchip: add a queue for deferred pin output settings on probe
  pinctrl: qcom: spmi-gpio: correct parent irqspec translation
  pinctrl: amd: Handle wake-up interrupt
  pinctrl: amd: Add irq field data
  pinctrl: core: Remove duplicated word from devm_pinctrl_unregister()

Pull VFIO fixes from Alex Williamson:

 - Fix vfio-ap leak on uninit (Jason Gunthorpe)

 - Add missing prototype arg name (Colin Ian King)

* tag 'vfio-v5.15-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/ap_ops: Add missed vfio_uninit_group_dev()
  vfio/pci: add missing identifier name in argument of function prototype

Pull more m68k updates from Geert Uytterhoeven:

 - signal handling fixes

 - removal of set_fs()

[ The set_fs removal isn't strictly a fix, but it's been pending for a
  while and is very welcome. The signal handling fixes resolved an issue
  that was incorrectly attributed to the set_fs changes    - Linus ]

* tag 'm68k-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Remove set_fs()
  m68k: Provide __{get,put}_kernel_nofault
  m68k: Factor the 8-byte lowlevel {get,put}_user code into helpers
  m68k: Use BUILD_BUG for passing invalid sizes to get_user/put_user
  m68k: Remove the 030 case in virt_to_phys_slow
  m68k: Document that access_ok is broken for !CONFIG_CPU_HAS_ADDRESS_SPACES
  m68k: Leave stack mangling to asm wrapper of sigreturn()
  m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal
  m68k: Handle arrivals of multiple signals correctly

Merge tag 'nios2_fixes_for_v5.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux

Pull nios2 fixes from Dinh Nguyen:

 - Fix build warning for unmet dependency for EARLY_PRINTK

 - Remove unused dram_start() function

* tag 'nios2_fixes_for_v5.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  NIOS2: setup.c: drop unused variable 'dram_start'
  NIOS2: fix kconfig unmet dependency warning for SERIAL_CORE_CONSOLE

Pull fsverity fix from Eric Biggers:
 "Fix an integer overflow when computing the Merkle tree layout of
  extremely large files, exposed by btrfs adding support for fs-verity"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fs-verity: fix signed integer overflow with i_size near S64_MAX

Pull virtio/vdpa fixes from Michael Tsirkin:
 "Fixes up some issues in rc1"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa: potential uninitialized return in vhost_vdpa_va_map()
  vdpa/mlx5: Avoid executing set_vq_ready() if device is reset
  vdpa/mlx5: Clear ready indication for control VQ
  vduse: Cleanup the old kernel states after reset failure
  vduse: missing error code in vduse_init()
  virtio: don't fail on !of_device_is_compatible

Pull MMC fixes from Ulf Hansson:

 - renesas_sdhi: Fix regression with hard reset on old SDHIs

 - dw_mmc: Only inject fault before done/error

* tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: renesas_sdhi: fix regression with hard reset on old SDHIs
  mmc: dw_mmc: Only inject fault before done/error

The hrtimer callback pcsp_do_timer() prepares rearming of the timer with
hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to
forward the expiry time of the hrtimer by a multiple of the period argument
so that the expiry time greater than the time provided in the 'now'
argument.

pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry
time as 'now' argument. That's providing a periodic timer expiry, but is
not really robust when the timer callback is delayed so that the resulting
new expiry time is already in the past which causes the callback to be
invoked immediately again. If the timer is delayed then the back to back
invocation is not really making it better than skipping the missed
periods. Sound is distorted in any case.

Use hrtimer_forward_now() which ensures that the next expiry is in the
future. This prevents hogging the CPU in the timer expiry code and allows
later on to remove hrtimer_forward() from the public interfaces.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210923153339.623208460@linutronix.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'perf-tools-fixes-for-v5.15-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix 'perf test' DWARF unwind for optimized builds.

 - Fix 'perf test' 'Object code reading' when dealing with samples in
   @plt symbols.

 - Fix off-by-one directory paths in the ARM support code.

 - Fix error message to eliminate confusion in 'perf config' when first
   creating a config file.

 - 'perf iostat' fix for system wide operation.

 - Fix printing of metrics when 'perf iostat' is used with one or more
   iio_root_ports and unconnected cpus (using -C).

 - Fix several typos in the documentation files.

 - Fix spelling mistake "icach" -> "icache" in the power8 JSON vendor
   files.

* tag 'perf-tools-fixes-for-v5.15-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *'
  perf iostat: Use system-wide mode if the target cpu_list is unspecified
  perf config: Refine error message to eliminate confusion
  perf doc: Fix typos all over the place
  perf arm: Fix off-by-one directory paths.
  perf vendor events powerpc: Fix spelling mistake "icach" -> "icache"
  perf tests: Fix flaky test 'Object code reading'
  perf test: Fix DWARF unwind for optimized builds.

Pull kvm fixes from Paolo Bonzini:
 "A bit late... I got sidetracked by back-from-vacation routines and
  conferences. But most of these patches are already a few weeks old and
  things look more calm on the mailing list than what this pull request
  would suggest.

  x86:

   - missing TLB flush

   - nested virtualization fixes for SMM (secure boot on nested
     hypervisor) and other nested SVM fixes

   - syscall fuzzing fixes

   - live migration fix for AMD SEV

   - mirror VMs now work for SEV-ES too

   - fixes for reset

   - possible out-of-bounds access in IOAPIC emulation

   - fix enlightened VMCS on Windows 2022

  ARM:

   - Add missing FORCE target when building the EL2 object

   - Fix a PMU probe regression on some platforms

  Generic:

   - KCSAN fixes

  selftests:

   - random fixes, mostly for clang compilation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
  selftests: KVM: Explicitly use movq to read xmm registers
  selftests: KVM: Call ucall_init when setting up in rseq_test
  KVM: Remove tlbs_dirty
  KVM: X86: Synchronize the shadow pagetable before link it
  KVM: X86: Fix missed remote tlb flush in rmap_write_protect()
  KVM: x86: nSVM: don't copy virt_ext from vmcb12
  KVM: x86: nSVM: test eax for 4K alignment for GP errata workaround
  KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0
  KVM: x86: nSVM: restore int_vector in svm_clear_vintr
  kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]
  KVM: x86: nVMX: re-evaluate emulation_required on nested VM exit
  KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if !from_vmentry
  KVM: x86: VMX: synthesize invalid VM exit when emulating invalid guest state
  KVM: x86: nSVM: refactor svm_leave_smm and smm_enter_smm
  KVM: x86: SVM: call KVM_REQ_GET_NESTED_STATE_PAGES on exit from SMM mode
  KVM: x86: reset pdptrs_from_userspace when exiting smm
  KVM: x86: nSVM: restore the L1 host state prior to resuming nested guest on SMM exit
  KVM: nVMX: Filter out all unsupported controls when eVMCS was activated
  KVM: KVM: Use cpumask_available() to check for NULL cpumask when kicking vCPUs
  KVM: Clean up benign vcpu->cpu data races when kicking vCPUs
  ...

Pull media fixes from Mauro Carvalho Chehab:
 "A couple of driver fixes:

   - hantro: Fix check for single irq

   - cedrus: Fix SUNXI tile size calculation

   - s5p-jpeg: rename JPEG marker constants to prevent build warnings

   - ir_toy: prevent device from hanging during transmit"

* tag 'media/v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: ir_toy: prevent device from hanging during transmit
  media: s5p-jpeg: rename JPEG marker constants to prevent build warnings
  media: cedrus: Fix SUNXI tile size calculation
  media: hantro: Fix check for single irq

Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES.
In arch/mips/sibyte/Platform like:

  cflags-$(CONFIG_SIBYTE_BCM112X) +=                                      \
                -I$(srctree)/arch/mips/include/asm/mach-sibyte          \
                -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL

Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL.
SIBYTE_HDR_FMASK_ALL is mean:

 #define SIBYTE_HDR_FMASK_ALL  SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
				     | SIBYTE_HDR_FMASK_1480_ALL)

So, If not limited to CPU_SB1, we will get such an error:

  arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror]
  arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror]

Fixes: da2a68b3 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9d682ea6 ("vboxsf: Fix the check for the old binary
mount-arguments struct") was meant to fix a build error due to sign
mismatch in 'char' and the use of character constants, but it just moved
the error elsewhere, in that on some architectures characters and signed
and on others they are unsigned, and that's just how the C standard
works.

The proper fix is a simple "don't do that then".  The code was just
being silly and odd, and it should never have cared about signed vs
unsigned characters in the first place, since what it is testing is not
four "characters", but four bytes.

And the way to compare four bytes is by using "memcmp()".

Which compilers will know to just turn into a single 32-bit compare with
a constant, as long as you don't have crazy debug options enabled.

Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/


Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the CQE size of the user space is not the size supported by the
hardware, the creation of CQ should be stopped.

Fixes: 09a5f210 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com


Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The size of CQE is different for different versions of hardware, so the
driver needs to specify the size of CQE explicitly.

Fixes: 09a5f210 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com


Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pointers should be printed with %p or %px rather than cast to 'unsigned
long long' and printed with %llx.  Change %llx to %p to print the secured
pointer.

Fixes: 042a00f9 ("IB/{ipoib,hfi1}: Add a timeout handler for rdma_netdev")
Link: https://lore.kernel.org/r/20210922134857.619602-1-qtxuning1999@sjtu.edu.cn


Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pull HID fixes from Jiri Kosina:

 - NULL pointer dereference fixes in amd_sfh driver (Basavaraj Natikar,
   Evgeny Novikov)

 - data processing fix for hid-u2fzero (Andrej Shadura)

 - fix for out-of-bounds write in hid-betop (F.A.Sulaiman)

 - new device IDs / device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: amd_sfh: Fix potential NULL pointer dereference
  HID: u2fzero: ignore incomplete packets without data
  HID: amd_sfh: Fix potential NULL pointer dereference
  HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs
  HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS
  HID: betop: fix slab-out-of-bounds Write in betop_probe

This is a nuisance when CONFIG_WERROR is set, so drop the variable
declaration since the code that used it was removed.

../arch/nios2/kernel/setup.c: In function 'setup_arch':
../arch/nios2/kernel/setup.c:152:13: warning: unused variable 'dram_start' [-Wunused-variable]
  152 |         int dram_start;

Fixes: 7f7bc20b ("nios2: Don't use _end for calculating min_low_pfn")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andreas Oetken <andreas.oetken@siemens.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

If the 'perf iostat' user specifies two or more iio_root_ports and also
specifies the cpu(s) by -C which is not *connected to all* the above iio
ports, the iostat_print_metric() will run into trouble:

For example:

  $ perf iostat list
  S0-uncore_iio_0<0000:16>
  S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0

  $ perf iostat 0000:16,0000:97 -C 1 -- ls
  port 	Inbound Read(MB)	Inbound Write(MB)	Outbound Read(MB)	Outbound
  Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault
  (core dumped) perf stat --iostat$DELIMITER$*

The core-dump stack says, in the above corner case, the returned
(struct perf_counts_values *) count will be NULL, and the caller
iostat_print_metric() apparently doesn't not handle this case.

  433	struct perf_counts_values *count = perf_counts(evsel->counts, die, 0);
  434
  435	if (count->run && count->ena) {
  (gdb) p count
  $1 = (struct perf_counts_values *) 0x0

The deeper reason is that there are actually no statistics from the user
specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with
minimum cost by adding a NULL check in the user space.

Fixes: f9ed693e ("perf stat: Enable iostat mode for x86 platforms")
Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210927081115.39568-2-likexu@tencent.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

An iostate use case like "perf iostat 0000:16,0000:97 -- ls" should be
implemented to work in system-wide mode to ensure that the output from
print_header() is consistent with the user documentation perf-iostat.txt,
rather than incorrectly assuming that the kernel does not support it:

 Error:
 The sys_perf_event_open() syscall returned with 22 (Invalid argument) \
 for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
 /bin/dmesg | grep -i perf may provide additional information.

This error is easily fixed by assigning system-wide mode by default
for IOSTAT_RUN only when the target cpu_list is unspecified.

Fixes: f07952b1 ("perf stat: Basic support for iostat in perf")
Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210927081115.39568-1-likexu@tencent.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If there is no configuration file at first, the user can write any pair
of "key.subkey=value" to the newly created configuration file, while
value validation against a valid configurable key is *deferred* until
the next execution or the implied execution of "perf config ... ".

For example:

  $ rm ~/.perfconfig
  $ perf config call-graph.dump-size=65529
  $ cat ~/.perfconfig
  # this file is auto-generated.
  [call-graph]
 	dump-size = 65529
  $ perf config call-graph.dump-size=2048
  callchain: Incorrect stack dump size (max 65528): 65529
  Error: wrong config key-value pair call-graph.dump-size=65529

The user might expect that the second value 2048 is valid and can be
updated to the configuration file, but the error message is very
confusing because the first value 65529 is not reported as an error
during the last configuration.

It is recommended not to change the current behavior of delayed
validation (as more effort is needed), but to refine the original error
message to *clearly indicate* that the cause of the error is the
configuration file.

Signed-off-by: Like Xu <likexu@tencent.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210924115817.58689-1-likexu@tencent.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Considering that perf and its subcommands have so many parameters, the
documentation is always the first stop for perf beginners. Fixing some
spelling errors will relax the eyes of some readers a little bit.

 s/specicfication/specification/
 s/caheline/cacheline/
 s/tranasaction/transaction/
 s/complan/complain/
 s/sched_wakep/sched_wakeup/
 s/possble/possible/
 s/methology/methodology/

Signed-off-by: Like Xu <likexu@tencent.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210924081942.38368-1-likexu@tencent.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Relative path include works in the regular build due to -I paths but may
fail in other situations.

v2. Rebase. Comments on v1 were that we should handle include paths
    differently and it is agreed that can be a sensible refactor but
    beyond the scope of this change.
https://lore.kernel.org/lkml/20210504191227.793712-1-irogers@google.com/



Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210923154254.737657-1-irogers@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There is a spelling mistake in the description text, fix it.

Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210916081314.41751-1-colin.king@canonical.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This test occasionally fails on aarch64 when a sample is taken in
free@plt and it fails with "Bytes read differ from those read by
objdump".

This is because that symbol is near a section boundary in the elf file.
Despite the -z option to always output zeros, objdump uses
bfd_map_over_sections() to iterate through the elf file so it doesn't
see outside of the sections where these zeros are and can't print them.

For example this boundary proceeds free@plt in libc with a gap of 48
bytes between .plt and .text:

  objdump -d -z --start-address=0x23cc8 --stop-address=0x23d08 libc-2.30.so

  libc-2.30.so:     file format elf64-littleaarch64

  Disassembly of section .plt:

  0000000000023cc8 <*ABS*+0x7fd00@plt+0x8>:
     23cc8:	91018210 	add	x16, x16, #0x60
     23ccc:	d61f0220 	br	x17

  Disassembly of section .text:

  0000000000023d00 <abort@@GLIBC_2.17-0x98>:
     23d00:	a9bf7bfd 	stp	x29, x30, [sp, #-16]!
     23d04:	910003fd 	mov	x29, sp

Taking a sample in free@plt is very rare because it is so small, but the
test can be forced to fail almost every time on any platform by linking
the test with a shared library that has a single empty function and
calling it in a loop.

The fix is to zero the buffers so that when there is a jump in the
addresses output by objdump, zeros are already filled in between.

Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210906152238.3415467-1-james.clark@arm.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To ensure the stack frames are on the stack tail calls optimizations
need to be inhibited. If your compiler supports an attribute use it,
otherwise use an asm volatile barrier.

The barrier fix was suggested here:
https://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net/
Tested with an optimized clang build and by forcing the asm barrier
route with an optimized clang build.

A GCC bug tracking a proper disable_tail_calls is:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97831

Fixes: 9ae1e990 ("perf tools: Remove broken __no_tail_call
       attribute")

v2. is a rebase. The original fix patch generated quite a lot of
    discussion over the right place for the fix:
    https://lore.kernel.org/lkml/20201114000803.909530-1-irogers@google.com/


    The patch reflects my preference of it being near the use, so that
    future code cleanups don't break this somewhat special usage.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210922173812.456348-1-irogers@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The cl_data field of a privdata must be allocated and updated before
using in amd_sfh_hid_client_init() function.

Hence handling NULL pointer cl_data accordingly.

Fixes: d46ef750 ("HID: amd_sfh: Fix potential NULL pointer dereference")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull ksmbd fixes from Steve French:
 "Five fixes for the ksmbd kernel server, including three security
  fixes:

   - remove follow symlinks support

   - use LOOKUP_BENEATH to prevent out of share access

   - SMB3 compounding security fix

   - fix for returning the default streams correctly, fixing a bug when
     writing ppt or doc files from some clients

   - logging more clearly that ksmbd is experimental (at module load
     time)"

* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: use LOOKUP_BENEATH to prevent the out of share access
  ksmbd: remove follow symlinks support
  ksmbd: check protocol id in ksmbd_verify_smb_message()
  ksmbd: add default data stream name in FILE_STREAM_INFORMATION
  ksmbd: log that server is experimental at module load

Pull EDAC fixes from Borislav Petkov:
 "Fix two EDAC drivers using the wrong value type for the DIMM mode"

* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/dmc520: Assign the proper type to dimm->edac_mode
  EDAC/synopsys: Fix wrong value type assignment for edac_mode

Pull thermal fixes from Daniel Lezcano:

 - Fix thermal shutdown after a suspend/resume due to a wrong TCC value
   restored on Intel platform (Antoine Tenart)

 - Fix potential buffer overflow when building the list of policies. The
   buffer size is not updated after writing to it (Dan Carpenter)

 - Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)

* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
  thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
  thermal/drivers/int340x: Do not set a wrong tcc offset on resume

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Prevent sending the wrong signal when protection keys are enabled
     and the kernel handles a fault in the vsyscall emulation.

   - Invoke early_reserve_memory() before invoking e820_memory_setup()
     which is required to make the Xen dom0 e820 hooks work correctly.

   - Use the correct data type for the SETZ operand in the EMQCMDS
     instruction wrapper.

   - Prevent undefined behaviour to the potential unaligned accesss in
     the instruction decoder library"

* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
  x86/asm: Fix SETZ size enqcmds() build failure
  x86/setup: Call early_reserve_memory() earlier
  x86/fault: Fix wrong signal when vsyscall fails with pkey

Pull timer fix from Thomas Gleixner:
 "A single fix for the recently introduced regression in posix CPU
  timers which failed to stop the timer when requested. That caused
  unexpected signals to be sent to the process/thread causing
  malfunction"

* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Prevent spuriously armed 0-value itimer

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Work around a bad GIC integration on a Renesas platform which can't
     handle byte-sized MMIO access

   - Plug a potential memory leak in the GICv4 driver

   - Fix a regression in the Armada 370-XP IPI code which was caused by
     issuing EOI instack of ACK.

   - A couple of small fixes here and there"

* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic: Work around broken Renesas integration
  irqchip/renesas-rza1: Use semicolons instead of commas
  irqchip/gic-v3-its: Fix potential VPE leak on error
  irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
  irqchip/mbigen: Repair non-kernel-doc notation
  irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
  irqchip/armada-370-xp: Fix ack/eoi breakage
  Documentation: Fix irq-domain.rst build warning

Merge misc fixes from Andrew Morton:
 "16 patches.

  Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
  lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
  debug, and pagemap)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix uninitialized use in overcommit_policy_handler
  mm/memory_failure: fix the missing pte_unmap() call
  kasan: always respect CONFIG_KASAN_STACK
  sh: pgtable-3level: fix cast to pointer from integer of different size
  mm/debug: sync up latest migrate_reason to migrate_reason_names
  mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
  mm: fs: invalidate bh_lrus for only cold path
  lib/zlib_inflate/inffast: check config in C to avoid unused function warning
  tools/vm/page-types: remove dependency on opt_file for idle page tracking
  scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
  ocfs2: drop acl cache for directories too
  mm/shmem.c: fix judgment error in shmem_is_huge()
  xtensa: increase size of gcc stack frame check
  mm/damon: don't use strnlen() with known-bogus source length
  kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
  mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()

Pull SCSI fixes from James Bottomley:
 "Thirty-three fixes, I'm afraid.

  Essentially the build up from the last couple of weeks while I've been
  dealling with Linux Plumbers conference infrastructure issues. It's
  mostly the usual assortment of spelling fixes and minor corrections.

  The only core relevant changes are to the sd driver to reduce the spin
  up message spew and fix a small memory leak on the freeing path"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
  scsi: ses: Retry failed Send/Receive Diagnostic commands
  scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
  scsi: lpfc: Fix gcc -Wstringop-overread warning, again
  scsi: lpfc: Use correct scnprintf() limit
  scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
  scsi: core: Remove 'current_tag'
  scsi: acornscsi: Remove tagged queuing vestiges
  scsi: fas216: Kill scmd->tag
  scsi: qla2xxx: Restore initiator in dual mode
  scsi: ufs: core: Unbreak the reset handler
  scsi: sd_zbc: Support disks with more than 2**32 logical blocks
  scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
  scsi: bsg: Fix device unregistration
  scsi: sd: Make sd_spinup_disk() less noisy
  scsi: ufs: ufs-pci: Fix Intel LKF link stability
  scsi: mpt3sas: Clean up some inconsistent indenting
  scsi: megaraid: Clean up some inconsistent indenting
  scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
  scsi: Remove SCSI CDROM MAINTAINERS entry
  scsi: megaraid: Fix Coccinelle warning
  ...

Pull io_uring fixes from Jens Axboe:
 "This one looks a bit bigger than it is, but that's mainly because 2/3
  of it is enabling IORING_OP_CLOSE to close direct file descriptors.

  We've had a few folks using them and finding it confusing that the way
  to close them is through using -1 for file update, this just brings
  API symmetry for direct descriptors. Hence I think we should just do
  this now and have a better API for 5.15 release. There's some room for
  de-duplicating the close code, but we're leaving that for the next
  merge window.

  Outside of that, just small fixes:

   - Poll race fixes (Hao)

   - io-wq core dump exit fix (me)

   - Reschedule around potentially intensive tctx and buffer iterators
     on teardown (me)

   - Fix for always ending up punting files update to io-wq (me)

   - Put the provided buffer meta data under memcg accounting (me)

   - Tweak for io_write(), removing dead code that was added with the
     iterator changes in this release (Pavel)"

* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  io_uring: make OP_CLOSE consistent with direct open
  io_uring: kill extra checks in io_write()
  io_uring: don't punt files update to io-wq unconditionally
  io_uring: put provided buffer meta data under memcg accounting
  io_uring: allow conditional reschedule for intensive iterators
  io_uring: fix potential req refcount underflow
  io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
  io_uring: fix race between poll completion and cancel_hash insertion
  io-wq: ensure we exit if thread group is exiting