This allows the cache/processor/fault glue to be more easily used
from assembler code.  Tested on Assabet and Tegra 2.

Tested-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add a function to set the SCU low-power mode for SMP CPUs.  This
centralizes this functionality rather than having to expose the
SCU register definitions to each platform.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix ASM optimized code for LE
  microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1
  microblaze: Fix DTB passing from bootloader

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix length checks in checkSMB
  [CIFS] Update cifs minor version
  cifs: No need to check crypto blockcipher allocation
  cifs: clean up some compiler warnings
  cifs: make CIFS depend on CRYPTO_MD4
  cifs: force a reconnect if there are too many MIDs in flight
  cifs: don't pop a printk when sending on a socket is interrupted
  cifs: simplify SMB header check routine
  cifs: send an NT_CANCEL request when a process is signalled
  cifs: handle cancelled requests better
  cifs: fix two compiler warning about uninitialized vars

As Tao Ma noticed, change 5ecfda04 breaks blktrace. This is because
blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ,
so my attempt to not unnecessarity break COW during mlock ended up
causing mlock to fail with a permission problem.

I am proposing to let mlock ignore vma protection in all cases except
PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions
(as in the blktrace case, which broke at 5ecfda04

) or for PROT_EXEC
regions (which seem to me like they were always broken).

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The comments under "config STUB_POULSBO" are close to correct,
but they are not being followed.  This patch updates them to reflect
the requirements for THERMAL.

This build error is caused by STUB_POULSBO selecting ACPI_VIDEO
when ACPI_VIDEO's config requirements are not met.

  ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined!
  ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: NFSv4 readdir loses entries
  NFS: Micro-optimize nfs4_decode_dirent()
  NFS: Fix an NFS client lockdep issue
  NFS construct consistent co_ownerid for v4.1
  NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount
  NFS improve pnfs_put_deviceid_cache debug print
  NFS fix cb_sequence error processing
  NFS do not find client in NFSv4 pg_authenticate
  NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"
  NFS: Prevent memory allocation failure in nfsacl_encode()
  NFS: nfsacl_{encode,decode} should return signed integer
  NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"
  NFS: Fix "kernel BUG at fs/aio.c:554!"
  NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds().
  NFS: fix handling of malloc failure during nfs_flush_multi()

The cERROR message in checkSMB when the calculated length doesn't match
the RFC1001 length is incorrect in many cases. It always says that the
RFC1001 length is bigger than the SMB, even when it's actually the
reverse.

Fix the error message to say the reverse of what it does now when the
SMB length goes beyond the end of the received data. Also, clarify the
error message when the RFC length is too big. Finally, clarify the
comments to show that the 512 byte limit on extra data at the end of
the packet is arbitrary.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: smp_on_up: allow non-ARM SMP processors
  ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
  ARM: initrd: disable initrd if passed address overlaps reserved region
  ARM: footbridge: fix debug macros
  ARM: mmci: round down the bytes transferred on error
  ARM: mmci: complete the transaction on error
  ARM: 6642/1: mmci: calculate remaining bytes at error correctly

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  arm: omap2: mux: fix compile warning
  omap1: Simplify use of omap_irq_flags
  omap2+: Fix unused variable warning for omap_irq_base

Fix kernel-doc warning in kernel.h from commit 7ef88ad5


("BUILD_BUG_ON: make it handle more cases"):

  Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
  Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: xfs_bmap_add_extent_delay_real should init br_startblock
  xfs: fix dquot shaker deadlock
  xfs: handle CIl transaction commit failures correctly
  xfs: limit extsize to size of AGs and/or MAXEXTLEN
  xfs: prevent extsize alignment from exceeding maximum extent size
  xfs: limit extent length for allocation to AG size
  xfs: speculative delayed allocation uses rounddown_power_of_2 badly
  xfs: fix efi item leak on forced shutdown
  xfs: fix log ticket leak on forced shutdown.

Patches should keep coming through Rusty but it helps if I'm Cc'd as
well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
  usb: gadget: composite: avoid access beyond array max length
  USB: serial: handle Data Carrier Detect changes
  USB: gadget: Fix endpoint representation in ci13xxx_udc
  USB: gadget: Fix error path in ci13xxx_udc gadget probe function
  usb: pch_udc: Fix the worning log issue at gadget driver remove
  USB: serial: Updated support for ICOM devices
  USB: ehci-mxc: add work-around for efika mx/sb bug
  USB: unbreak ehci-mxc on otg port of i.MX27
  drivers: update to pl2303 usb-serial to support Motorola cables
  USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
  USB serial: add missing .usb_driver field in serial drivers
  USB: ehci-fsl: Fix 'have_sysif_regs' detection
  USB: g_printer: fix bug in module parameter definitions
  USB: g_printer: fix bug in unregistration
  USB: uss720: remove duplicate USB device
  MAINTAINERS: add ueagle-atm entry
  USB: EHCI: fix DMA deallocation bug
  USB: pch_udc: support new device ML7213 IOH
  usb: pch_udc: Fixed issue which does not work with g_serial
  usb: set ep_dev async suspend should be later than device_initialize
  ...

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
  staging: r8712u: Add new device IDs
  staging: brcm80211: fix suspend/resume issue in brcmsmac
  staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
  Staging: iio: Aditional fixpoint formatted output bugfix
  staging: usbip: vhci: use urb->dev->portnum to find port
  staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
  staging: usbip: vhci: friendly log messages for connection errors
  staging: usbip: vhci: refuse to enqueue for dead connections
  staging: usbip: vhci: give back URBs from in-flight unlink requests
  staging: usbip: vhci: update reference count for usb_device
  staging: usbip: stub: update refcounts for devices and interfaces
  staging: tidspbridge: replace mbox callback with notifier_call
  staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
  Staging: speakup: &&/|| confusion in silent_store()
  iio: Fixpoint formatted output bugfix
  staging: rt2860: Fix incorrect netif_stop_queue usage warning
  staging: r8712u: Fix memory leak in firmware loading
  staging: tidspbridge: configure full L1 MMU range
  staging: rt2870sta: Add ID for Linksys WUSB100v2
  Staging: xgfib: put parenthesis in the right place
  ...

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/serial: fix apbuart build
  n_hdlc: fix read and write locking
  serial: unbreak billionton CF card
  tty: use for_each_console() and WARN() on sysfs failures
  vt: fix issue when fbcon wants to takeover a second time.

Fix up trivial conflict in drivers/tty/tty_io.c

Signed-off-by: Steve French <sfrench@us.ibm.com>

Allow non-ARM SMP processors to use the SMP_ON_UP feature.  CPUs
supporting SMP must have the new CPU ID format, so check for this first.
Then check for ARM11MPCore, which fails the MPIDR check.  Lastly check
the MPIDR reports multiprocessing extensions and that the CPU is part of
a multiprocessing system.

Cc: <stable@kernel.org>
Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Missed one change as per earlier suggestion.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

New compiler warnings that I noticed when building a patchset based
on recent Fedora kernel:

fs/cifs/cifssmb.c: In function 'CIFSSMBSetFileSize':
fs/cifs/cifssmb.c:4813:8: warning: variable 'data_offset' set but not used
[-Wunused-but-set-variable]

fs/cifs/file.c: In function 'cifs_open':
fs/cifs/file.c:349:24: warning: variable 'pCifsInode' set but not used
[-Wunused-but-set-variable]
fs/cifs/file.c: In function 'cifs_partialpagewrite':
fs/cifs/file.c:1149:23: warning: variable 'cifs_sb' set but not used
[-Wunused-but-set-variable]
fs/cifs/file.c: In function 'cifs_iovec_write':
fs/cifs/file.c:1740:9: warning: passing argument 6 of 'CIFSSMBWrite2' from
incompatible pointer type [enabled by default]
fs/cifs/cifsproto.h:337:12: note: expected 'unsigned int *' but argument is
of type 'size_t *'

fs/cifs/readdir.c: In function 'cifs_readdir':
fs/cifs/readdir.c:767:23: warning: variable 'cifs_sb' set but not used
[-Wunused-but-set-variable]

fs/cifs/cifs_dfs_ref.c: In function 'cifs_dfs_d_automount':
fs/cifs/cifs_dfs_ref.c:342:2: warning: 'rc' may be used uninitialized in
this function [-Wuninitialized]
fs/cifs/cifs_dfs_ref.c:278:6: note: 'rc' was declared here

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Recently CIFS was changed to use the kernel crypto API for MD4 hashes,
but the Kconfig dependencies were not changed to reflect this.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Ensure that the ISA/PCI IO space accessors are properly ordered on
ARMv6+ architectures.  These should always be ordered with respect to
all other accesses.

This also fixes __iormb() and __iowmb() not being visible to ioread/
iowrite if a platform defines its own MMIO accessors.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Disable the initrd if the passed address already overlaps the reserved
region.  This avoids oopses on Netwinders when NeTTrom tells the kernel
that an initrd is located at mem+4MB, but this overlaps the BSS,
resulting in the kernels in-use BSS being freed.

This should be applied to v2.6.37-stable.

Cc: <stable@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

0ea12930

 (arm: return both physical and virtual addresses from addruart)
changed the way the 'addruart' worked, making it return both the virt
and phys addresses.  Unfortunately, for footbridge, these were reversed.
Fix that.  Tested on Netwinder.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

We should not report incomplete blocks on error.  Return the number of
bytes successfully transferred, rounded down to the nearest block.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When we encounter an error, make sure we complete the transaction
otherwise we'll leave the request dangling.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Currently, we allow the pending_mid_q to grow without bound with
SIGKILL'ed processes. This could eventually be a DoS'able problem. An
unprivileged user could a process that does a long-running call and then
SIGKILL it.

If he can also intercept the NT_CANCEL calls or the replies from the
server, then the pending_mid_q could grow very large, possibly even to
2^16 entries which might leave GetNextMid in an infinite loop. Fix this
by imposing a hard limit of 32k calls per server. If we cross that
limit, set the tcpStatus to CifsNeedReconnect to force cifsd to
eventually reconnect the socket and clean out the pending_mid_q.

While we're at it, clean up the function a bit and eliminate an
unnecessary NULL pointer check.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

If we kill the process while it's sending on a socket then the
kernel_sendmsg will return -EINTR. This is normal. No need to spam the
ring buffer with this info.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

...just cleanup. There should be no behavior change.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Use the new send_nt_cancel function to send an NT_CANCEL when the
process is delivered a fatal signal. This is a "best effort" enterprise
however, so don't bother to check the return code. There's nothing we
can reasonably do if it fails anyway.

Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Currently, when a request is cancelled via signal, we delete the mid
immediately. If the request was already transmitted however, the client
is still likely to receive a response. When it does, it won't recognize
it however and will pop a printk.

It's also a little dangerous to just delete the mid entry like this. We
may end up reusing that mid. If we do then we could potentially get the
response from the first request confused with the later one.

Prevent the reuse of mids by marking them as cancelled and keeping them
on the pending_mid_q list. If the reply comes in, we'll delete it from
the list then. If it never comes, then we'll delete it at reconnect
or when cifsd comes down.

Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

fs/cifs/link.c: In function ‘symlink_hash’:
fs/cifs/link.c:58:3: warning: ‘rc’ may be used uninitialized in this
function [-Wuninitialized]

fs/cifs/smbencrypt.c: In function ‘mdfour’:
fs/cifs/smbencrypt.c:61:3: warning: ‘rc’ may be used uninitialized in this
function [-Wuninitialized]

Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"

Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped
scancodes, but rather return KEY_RESERVED.

This fixes breakage with Ubuntu's input-kbd utility that stopped
returning full keymaps for remote controls.

Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mark Lord <kernel@teksavvy.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - retry failed resets when reconnecting
  Input: synaptics - fix reconnect logic on MT devices
  Input: tegra-kbc - fix keymap entry for LeftMeta key
  Input: tegra-kbc - fix build error

Since check_prlimit_permission always fails in the case of SUID/GUID
processes, such processes are not able to read or set their own limits.
This commit changes this by assuming that process can always read/change
its own limits.

Signed-off-by: Kacper Kornet <kornet@camk.edu.pl>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove duplicated #include('s) in
  drivers/platform/x86/intel_scu_ipc.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In ntfs_mft_record_alloc() when mapping the new extent mft record with
map_extent_mft_record() we overwrite @m with the return value and on
error, we then try to use the old @m but that is no longer there as @m
now contains an error code instead so we crash when dereferencing the
error code as if it were a pointer.

The simple fix is to use a temporary variable to store the return value
thus preserving the original @m for later use.  This is a backport from
the commercial Tuxera-NTFS driver and is well tested...

Thanks go to Julia Lawall for pointing this out (whilst I had fixed it
in the commercial driver I had failed to fix it in the Linux kernel).

Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>