- Apr 27, 2022
-
-
Xiaomeng Tong authored
commit f730a46b upstream. These two bug are here: list_for_each_entry_safe_continue(w, n, list, power_list); list_for_each_entry_safe_continue(w, n, list, power_list); After the list_for_each_entry_safe_continue() exits, the list iterator will always be a bogus pointer which point to an invalid struct objdect containing HEAD member. The funciton poniter 'w->event' will be a invalid value which can lead to a control-flow hijack if the 'w' can be controlled. The original intention was to continue the outer list_for_each_entry_safe() loop with the same entry if w->event is NULL, but misunderstanding the meaning of list_for_each_entry_safe_continue(). So just add a 'continue;' to fix the bug. Cc: stable@vger.kernel.org Fixes: 163cac06 ("ASoC: Factor out DAPM sequence execution") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220329012134.9375-1-xiam0nd.tong@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Limonciello authored
commit 06fb4ecf upstream. Commit 5467801f ("gpio: Restrict usage of GPIO chip irq members before initialization") attempted to fix a race condition that lead to a NULL pointer, but in the process caused a regression for _AEI/_EVT declared GPIOs. This manifests in messages showing deferred probing while trying to allocate IRQs like so: amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x0000 to IRQ, err -517 amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x002C to IRQ, err -517 amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x003D to IRQ, err -517 [ .. more of the same .. ] The code for walking _AEI doesn't handle deferred probing and so this leads to non-functional GPIO interrupts. Fix this issue by moving the call to `acpi_gpiochip_request_interrupts` to occur after gc->irc.initialized is set. Fixes: 5467801f ("gpio: Restrict usage of GPIO chip irq members before initialization") Link: https://lore.kernel.org/linux-gpio/BL1PR12MB51577A77F000A008AA694675E2EF9@BL1PR12MB5157.namprd12.prod.outlook.com/ Link: https://bugzilla.suse.com/show_bug.cgi?id=1198697 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215850 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1979 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1976 Reported-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Shreeya Patel <shreeya.patel@collabora.com> Tested-By: Samuel Čavoj <samuel@cavoj.net> Tested-By: lukeluk498@gmail.com Link: Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-and-tested-by: Takashi Iwai <tiwai@suse.de> Cc: Shreeya Patel <shreeya.patel@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Valerio authored
commit cefa91b2 upstream. Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, if next_offset is greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE bytes increasing actions_len by req_size. This can then lead to an OOB write access, especially when further actions need to be copied. Fix it by rearranging the flow action size check. KASAN splat below: ================================================================== BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch] Write of size 65360 at addr ffff888147e4001c by task handler15/836 CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27 ... Call Trace: <TASK> dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_report+0xb5/0x130 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 reserve_sfa_size+0x1ba/0x380 [openvswitch] __add_action+0x24/0x120 [openvswitch] ovs_nla_add_action+0xe/0x20 [openvswitch] ovs_ct_copy_action+0x29d/0x1130 [openvswitch] ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x56/0xa0 ? create_prof_cpu_mask+0x20/0x20 ? ovs_ct_verify+0xf0/0xf0 [openvswitch] ? prep_compound_page+0x198/0x2a0 ? __kasan_check_byte+0x10/0x40 ? kasan_unpoison+0x40/0x70 ? ksize+0x44/0x60 ? reserve_sfa_size+0x75/0x380 [openvswitch] __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch] ? __zone_watermark_ok+0x420/0x420 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch] ? __alloc_pages+0x1a9/0x3e0 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0 ? unwind_next_frame+0x991/0x1e40 ? __mod_node_page_state+0x99/0x120 ? __mod_lruvec_page_state+0x2e3/0x470 ? __kasan_kmalloc_large+0x90/0xe0 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch] ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch] ... Cc: stable@vger.kernel.org Fixes: f28cd2af ("openvswitch: fix flow actions reallocation") Signed-off-by: Paolo Valerio <pvalerio@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Max Filippov authored
commit 839769c3 upstream. Fast coprocessor exception handler saves a3..a6, but coprocessor context load/store code uses a4..a7 as temporaries, potentially clobbering a7. 'Potentially' because coprocessor state load/store macros may not use all four temporary registers (and neither FPU nor HiFi macros do). Use a3..a6 as intended. Cc: stable@vger.kernel.org Fixes: c658eac6 ("[XTENSA] Add support for configurable registers and coprocessors") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guo Ren authored
commit ee69d4be upstream. These patch_text implementations are using stop_machine_cpuslocked infrastructure with atomic cpu_count. The original idea: When the master CPU patch_text, the others should wait for it. But current implementation is using the first CPU as master, which couldn't guarantee the remaining CPUs are waiting. This patch changes the last CPU as the master to solve the potential risk. Fixes: 64711f9a ("xtensa: implement jump_label support") Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: <stable@vger.kernel.org> Message-Id: <20220407073323.743224-4-guoren@kernel.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leo Yan authored
[ Upstream commit ccb17cae ] Since commit bb30acae ("perf report: Bail out --mem-mode if mem info is not available") "perf mem report" and "perf report --mem-mode" don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample type. The commit ffab4870 ("perf: arm-spe: Fix perf report --mem-mode") partially fixes the issue. It adds PERF_SAMPLE_DATA_SRC bit for Arm SPE event, this allows the perf data file generated by kernel v5.18-rc1 or later version can be reported properly. On the other hand, perf tool still fails to be backward compatibility for a data file recorded by an older version's perf which contains Arm SPE trace data. This patch is a workaround in reporting phase, when detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will force to set the bit in the sample type and give a warning info. Fixes: bb30acae ("perf report: Bail out --mem-mode if mem info is not available") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Leo Yan authored
[ Upstream commit c6d8df01 ] If use command 'perf script -F,+data_src' to dump memory samples with Arm SPE trace data, it reports error: # perf script -F,+data_src Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field. This is because the 'dummy:u' event is absent DATA_SRC bit in its sample type, so if a file contains AUX area tracing data then always allow field 'data_src' to be selected as an option for perf script. Fixes: e55ed342 ("perf arm-spe: Synthesize memory event") Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220417114837.839896-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Athira Rajeev authored
[ Upstream commit c6cc9a85 ] When scheduling a group of events, there are constraint checks done to make sure all events can go in a group. Example, one of the criteria is that events in a group cannot use the same PMC. But platform specific PMU supports alternative event for some of the event codes. During perf_event_open(), if any event group doesn't match constraint check criteria, further lookup is done to find alternative event. By current design, the array of alternatives events in PMU code is expected to be sorted by column 0. This is because in find_alternative() the return criteria is based on event code comparison. ie. "event < ev_alt[i][0])". This optimisation is there since find_alternative() can be called multiple times. In power10 PMU code, the alternative event array is not sorted properly and hence there is breakage in finding alternative event. To work with existing logic, fix the alternative event array to be sorted by column 0 for power10-pmu.c Results: In case where an alternative event is not chosen when we could, events will be multiplexed. ie, time sliced where it could actually run concurrently. Example, in power10 PM_INST_CMPL_ALT(0x00002) has alternative event, PM_INST_CMPL(0x500fa). Without the fix, if a group of events with PMC1 to PMC4 is used along with PM_INST_CMPL_ALT, it will be time sliced since all programmable PMC's are consumed already. But with the fix, when it picks alternative event on PMC5, all events will run concurrently. Before: # perf stat -e r00002,r100fc,r200fa,r300fc,r400fc Performance counter stats for 'system wide': 328668935 r00002 (79.94%) 56501024 r100fc (79.95%) 49564238 r200fa (79.95%) 376 r300fc (80.19%) 660 r400fc (79.97%) 4.039150522 seconds time elapsed With the fix, since alternative event is chosen to run on PMC6, events will be run concurrently. After: # perf stat -e r00002,r100fc,r200fa,r300fc,r400fc Performance counter stats for 'system wide': 23596607 r00002 4907738 r100fc 2283608 r200fa 135 r300fc 248 r400fc 1.664671390 seconds time elapsed Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220419114828.89843-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Athira Rajeev authored
[ Upstream commit 0dcad700 ] When scheduling a group of events, there are constraint checks done to make sure all events can go in a group. Example, one of the criteria is that events in a group cannot use the same PMC. But platform specific PMU supports alternative event for some of the event codes. During perf_event_open(), if any event group doesn't match constraint check criteria, further lookup is done to find alternative event. By current design, the array of alternatives events in PMU code is expected to be sorted by column 0. This is because in find_alternative() the return criteria is based on event code comparison. ie. "event < ev_alt[i][0])". This optimisation is there since find_alternative() can be called multiple times. In power9 PMU code, the alternative event array is not sorted properly and hence there is breakage in finding alternative events. To work with existing logic, fix the alternative event array to be sorted by column 0 for power9-pmu.c Results: With alternative events, multiplexing can be avoided. That is, for example, in power9 PM_LD_MISS_L1 (0x3e054) has alternative event, PM_LD_MISS_L1_ALT (0x400f0). This is an identical event which can be programmed in a different PMC. Before: # perf stat -e r3e054,r300fc Performance counter stats for 'system wide': 1057860 r3e054 (50.21%) 379 r300fc (49.79%) 0.944329741 seconds time elapsed Since both the events are using PMC3 in this case, they are multiplexed here. After: # perf stat -e r3e054,r300fc Performance counter stats for 'system wide': 1006948 r3e054 182 r300fc Fixes: 91e0bd1e ("powerpc/perf: Add PM_LD_MISS_L1 and PM_BR_2PATH to power9 event list") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220419114828.89843-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Miaoqian Lin authored
[ Upstream commit 3d0b93d9 ] If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1. Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync() fails, so use pm_runtime_resume_and_get() instead. this function will handle this. Fixes: 4078f575 ("drm/vc4: Add DSI driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220420135008.2757-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexey Kardashevskiy authored
[ Upstream commit 26a62b75 ] The LoPAPR spec defines a guest visible IOMMU with a variable page size. Currently QEMU advertises 4K, 64K, 2M, 16MB pages, a Linux VM picks the biggest (16MB). In the case of a passed though PCI device, there is a hardware IOMMU which does not support all pages sizes from the above - P8 cannot do 2MB and P9 cannot do 16MB. So for each emulated 16M IOMMU page we may create several smaller mappings ("TCEs") in the hardware IOMMU. The code wrongly uses the emulated TCE index instead of hardware TCE index in error handling. The problem is easier to see on POWER8 with multi-level TCE tables (when only the first level is preallocated) as hash mode uses real mode TCE hypercalls handlers. The kernel starts using indirect tables when VMs get bigger than 128GB (depends on the max page order). The very first real mode hcall is going to fail with H_TOO_HARD as in the real mode we cannot allocate memory for TCEs (we can in the virtual mode) but on the way out the code attempts to clear hardware TCEs using emulated TCE indexes which corrupts random kernel memory because it_offset==1<<59 is subtracted from those indexes and the resulting index is out of the TCE table bounds. This fixes kvmppc_clear_tce() to use the correct TCE indexes. While at it, this fixes TCE cache invalidation which uses emulated TCE indexes instead of the hardware ones. This went unnoticed as 64bit DMA is used these days and VMs map all RAM in one go and only then do DMA and this is when the TCE cache gets populated. Potentially this could slow down mapping, however normally 16MB emulated pages are backed by 64K hardware pages so it is one write to the "TCE Kill" per 256 updates which is not that bad considering the size of the cache (1024 TCEs or so). Fixes: ca1fc489 ("KVM: PPC: Book3S: Allow backing bigger guest IOMMU pages with smaller physical pages") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220420050840.328223-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dave Stevenson authored
[ Upstream commit 5f18c078 ] The panel has a prepare call which is before video starts, and an enable call which is after. The Toshiba bridge should be configured before video, so move the relevant power and initialisation calls to prepare. Fixes: 2f733d61 ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dave Stevenson authored
[ Upstream commit f92055ae ] If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe fails before mipi_dsi_device_register_full is called, then in trying to log the error message if uses ts->dsi->dev when it is still NULL. Use ts->i2c->dev instead, which is initialised earlier in probe. Fixes: 2f733d61 ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Zhipeng Xie authored
[ Upstream commit 60490e79 ] This problem can be reproduced with CONFIG_PERF_USE_VMALLOC enabled on both x86_64 and aarch64 arch when using sysdig -B(using ebpf)[1]. sysdig -B works fine after rebuilding the kernel with CONFIG_PERF_USE_VMALLOC disabled. I tracked it down to the if condition event->rb->nr_pages != nr_pages in perf_mmap is true when CONFIG_PERF_USE_VMALLOC is enabled where event->rb->nr_pages = 1 and nr_pages = 2048 resulting perf_mmap to return -EINVAL. This is because when CONFIG_PERF_USE_VMALLOC is enabled, rb->nr_pages is always equal to 1. Arch with CONFIG_PERF_USE_VMALLOC enabled by default: arc/arm/csky/mips/sh/sparc/xtensa Arch with CONFIG_PERF_USE_VMALLOC disabled by default: x86_64/aarch64/... Fix this problem by using data_page_nr() [1] https://github.com/draios/sysdig Fixes: 906010b2 ("perf_event: Provide vmalloc() based mmap() backing") Signed-off-by: Zhipeng Xie <xiezhipeng1@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220209145417.6495-1-xiezhipeng1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
kuyo chang authored
[ Upstream commit 40f5aa4c ] The warning in cfs_rq_is_decayed() triggered: SCHED_WARN_ON(cfs_rq->avg.load_avg || cfs_rq->avg.util_avg || cfs_rq->avg.runnable_avg) There exists a corner case in attach_entity_load_avg() which will cause load_sum to be zero while load_avg will not be. Consider se_weight is 88761 as per the sched_prio_to_weight[] table. Further assume the get_pelt_divider() is 47742, this gives: se->avg.load_avg is 1. However, calculating load_sum: se->avg.load_sum = div_u64(se->avg.load_avg * se->avg.load_sum, se_weight(se)); se->avg.load_sum = 1*47742/88761 = 0. Then enqueue_load_avg() adds this to the cfs_rq totals: cfs_rq->avg.load_avg += se->avg.load_avg; cfs_rq->avg.load_sum += se_weight(se) * se->avg.load_sum; Resulting in load_avg being 1 with load_sum is 0, which will trigger the WARN. Fixes: f207934f ("sched/fair: Align PELT windows between cfs_rq and its se") Signed-off-by: kuyo chang <kuyo.chang@mediatek.com> [peterz: massage changelog] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/20220414090229.342-1-kuyo.chang@mediatek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tom Rix authored
[ Upstream commit faad6ceb ] sr_ioctl.c uses this pattern: result = sr_do_ioctl(cd, &cgc); to-user = buffer[]; kfree(buffer); return result; Use of a buffer without checking leaks information. Check result and jump over the use of buffer if there is an error. result = sr_do_ioctl(cd, &cgc); if (result) goto err; to-user = buffer[]; err: kfree(buffer); return result; Additionally, initialize the buffer to zero. This problem can be seen in the 2.4.0 kernel. Link: https://lore.kernel.org/r/20220411174756.2418435-1-trix@redhat.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Miaoqian Lin authored
[ Upstream commit 81022a17 ] If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Fixes: f77621cc ("Input: omap-keypad - dynamically handle register offsets") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220412070131.19848-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Manuel Ullmann authored
commit cbe6c3a8 upstream. This will reset deeply on freeze and thaw instead of suspend and resume and prevent null pointer dereferences of the uninitialized ring 0 buffer while thawing. The impact is an indefinitely hanging kernel. You can't switch consoles after this and the only possible user interaction is SysRq. BUG: kernel NULL pointer dereference RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic] aq_vec_init+0x85/0xe0 [atlantic] aq_nic_init+0xf7/0x1d0 [atlantic] atl_resume_common+0x4f/0x100 [atlantic] pci_pm_thaw+0x42/0xa0 resolves in aq_ring.o to ``` 0000000000000ae0 <aq_ring_rx_fill>: { /* ... */ baf: 48 8b 43 08 mov 0x8(%rbx),%rax buff->flags = 0U; /* buff is NULL */ ``` The bug has been present since the introduction of the new pm code in 8aaa112a ("net: atlantic: refactoring pm logic") and was hidden until 8ce84271 ("net: atlantic: changes for multi-TC support"), which refactored the aq_vec_{free,alloc} functions into aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The original functions just always reinitialized the buffers on S3/S4. If the interface is down before freezing, the bug does not occur. It does not matter, whether the initrd contains and loads the module before thawing. So the fix is to invert the boolean parameter deep in all pm function calls, which was clearly intended to be set like that. First report was on Github [1], which you have to guess from the resume logs in the posted dmesg snippet. Recently I posted one on Bugzilla [2], since I did not have an AQC device so far. #regzbot introduced: 8ce84271 #regzbot from: koo5 <kolman.jindrich@gmail.com> #regzbot monitor: https://github.com/Aquantia/AQtion/issues/32 Fixes: 8aaa112a ("net: atlantic: refactoring pm logic") Link: https://github.com/Aquantia/AQtion/issues/32 [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2] Cc: stable@vger.kernel.org Reported-by: koo5 <kolman.jindrich@gmail.com> Signed-off-by: Manuel Ullmann <labre@posteo.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Groeneveld authored
commit a3ae97f4 upstream. Commit b98ce2f4 ("dmaengine: imx-sdma: add uart rom script") broke uart rx on imx5 when using sdma firmware from older Freescale 2.6.35 kernel. In this case reading addr->uartXX_2_mcu_addr was going out of bounds of the firmware memory and corrupting the uart script addresses. Simply adding a bounds check before accessing addr->uartXX_2_mcu_addr does not work as the uartXX_2_mcu_addr members are now beyond the size of the older firmware and the uart addresses would never be populated in that case. There are other ways to fix this but overall the logic seems clearer to me to revert the uartXX_2_mcu_ram_addr structure entries back to uartXX_2_mcu_addr, change the newer entries to uartXX_2_mcu_rom_addr and update the logic accordingly. I have tested this patch on: 1. An i.MX53 system with sdma firmware from Freescale 2.6.35 kernel. Without this patch uart rx is broken in this scenario, with the patch uart rx is restored. 2. An i.MX6D system with no external sdma firmware. uart is okay with or without this patch. 3. An i.MX8MM system using current sdma-imx7d.bin firmware from linux-firmware. uart is okay with or without this patch and I confirmed the rom version of the uart script is being used which was the intention and reason for commit b98ce2f4 ("dmaengine: imx-sdma: add uart rom script") in the first place. Fixes: b98ce2f4 ("dmaengine: imx-sdma: add uart rom script") Cc: stable@vger.kernel.org Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220410223118.15086-1-kgroeneveld@lenbrook.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiaomeng Tong authored
commit 206680c4 upstream. The bug is here: __func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue); The list iterator 'desc' will point to a bogus position containing HEAD if the list is empty or no element is found. To avoid dev_dbg() prints a invalid address, use a new variable 'iter' as the list iterator, while use the origin variable 'desc' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 82e24246 ("dmaengine: xdmac: fix print warning on dma_addr_t variable") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zheyu Ma authored
commit aafa9f95 upstream. Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error: [ 5.146634] Bad IO access at port 0x1 (return inb(port)) [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60 [ 5.150856] RIP: 0010:ioread8+0x4a/0x60 [ 5.160238] Call Trace: [ 5.160470] <TASK> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell] [ 5.161728] ata_eh_recover+0x3520/0x6cc0 [ 5.168075] ata_do_eh+0x49/0x3c0 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alistair Popple authored
commit 31956166 upstream. In some cases it is possible for mmu_interval_notifier_remove() to race with mn_tree_inv_end() allowing it to return while the notifier data structure is still in use. Consider the following sequence: CPU0 - mn_tree_inv_end() CPU1 - mmu_interval_notifier_remove() ----------------------------------- ------------------------------------ spin_lock(subscriptions->lock); seq = subscriptions->invalidate_seq; spin_lock(subscriptions->lock); spin_unlock(subscriptions->lock); subscriptions->invalidate_seq++; wait_event(invalidate_seq != seq); return; interval_tree_remove(interval_sub); kfree(interval_sub); spin_unlock(subscriptions->lock); wake_up_all(); As the wait_event() condition is true it will return immediately. This can lead to use-after-free type errors if the caller frees the data structure containing the interval notifier subscription while it is still on a deferred list. Fix this by taking the appropriate lock when reading invalidate_seq to ensure proper synchronisation. I observed this whilst running stress testing during some development. You do have to be pretty unlucky, but it leads to the usual problems of use-after-free (memory corruption, kernel crash, difficult to diagnose WARN_ON, etc). Link: https://lkml.kernel.org/r/20220420043734.476348-1-apopple@nvidia.com Fixes: 99cb252f ("mm/mmu_notifier: add an interval tree notifier") Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Christian König <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nico Pache authored
commit e4a38402 upstream. The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which can be targeted by the oom reaper. This mapping is used to store the futex robust list head; the kernel does not keep a copy of the robust list and instead references a userspace address to maintain the robustness during a process death. A race can occur between exit_mm and the oom reaper that allows the oom reaper to free the memory of the futex robust list before the exit path has handled the futex death: CPU1 CPU2 -------------------------------------------------------------------- page_fault do_exit "signal" wake_oom_reaper oom_reaper oom_reap_task_mm (invalidates mm) exit_mm exit_mm_release futex_exit_release futex_cleanup exit_robust_list get_user (EFAULT- can't access memory) If the get_user EFAULT's, the kernel will be unable to recover the waiters on the robust_list, leaving userspace mutexes hung indefinitely. Delay the OOM reaper, allowing more time for the exit path to perform the futex cleanup. Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer Based on a patch by Michal Hocko. Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370 [1] Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com Fixes: 21292580 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") Signed-off-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Nico Pache <npache@redhat.com> Co-developed-by: Joel Savitz <jsavitz@redhat.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Waiman Long <longman@redhat.com> Cc: Herton R. Krzesinski <herton@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Segall <bsegall@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Savitz <jsavitz@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit 5f24d5a5 upstream. This is a fix for commit f6795053 ("mm: mmap: Allow for "high" userspace addresses") for hugetlb. This patch adds support for "high" userspace addresses that are optionally supported on the system and have to be requested via a hint mechanism ("high" addr parameter to mmap). Architectures such as powerpc and x86 achieve this by making changes to their architectural versions of hugetlb_get_unmapped_area() function. However, arm64 uses the generic version of that function. So take into account arch_get_mmap_base() and arch_get_mmap_end() in hugetlb_get_unmapped_area(). To allow that, move those two macros out of mm/mmap.c into include/linux/sched/mm.h If these macros are not defined in architectural code then they default to (TASK_SIZE) and (base) so should not introduce any behavioural changes to architectures that do not define them. For the time being, only ARM64 is affected by this change. Catalin (ARM64) said "We should have fixed hugetlb_get_unmapped_area() as well when we added support for 52-bit VA. The reason for commit f6795053 was to prevent normal mmap() from returning addresses above 48-bit by default as some user-space had hard assumptions about this. It's a slight ABI change if you do this for hugetlb_get_unmapped_area() but I doubt anyone would notice. It's more likely that the current behaviour would cause issues, so I'd rather have them consistent. Basically when arm64 gained support for 52-bit addresses we did not want user-space calling mmap() to suddenly get such high addresses, otherwise we could have inadvertently broken some programs (similar behaviour to x86 here). Hence we added commit f6795053. But we missed hugetlbfs which could still get such high mmap() addresses. So in theory that's a potential regression that should have bee addressed at the same time as commit f6795053 (and before arm64 enabled 52-bit addresses)" Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu Fixes: f6795053 ("mm: mmap: Allow for "high" userspace addresses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shakeel Butt authored
commit 9b301615 upstream. Daniel Dao has reported [1] a regression on workloads that may trigger a lot of refaults (anon and file). The underlying issue is that flushing rstat is expensive. Although rstat flush are batched with (nr_cpus * MEMCG_BATCH) stat updates, it seems like there are workloads which genuinely do stat updates larger than batch value within short amount of time. Since the rstat flush can happen in the performance critical codepaths like page faults, such workload can suffer greatly. This patch fixes this regression by making the rstat flushing conditional in the performance critical codepaths. More specifically, the kernel relies on the async periodic rstat flusher to flush the stats and only if the periodic flusher is delayed by more than twice the amount of its normal time window then the kernel allows rstat flushing from the performance critical codepaths. Now the question: what are the side-effects of this change? The worst that can happen is the refault codepath will see 4sec old lruvec stats and may cause false (or missed) activations of the refaulted page which may under-or-overestimate the workingset size. Though that is not very concerning as the kernel can already miss or do false activations. There are two more codepaths whose flushing behavior is not changed by this patch and we may need to come to them in future. One is the writeback stats used by dirty throttling and second is the deactivation heuristic in the reclaim. For now keeping an eye on them and if there is report of regression due to these codepaths, we will reevaluate then. Link: https://lore.kernel.org/all/CA+wXwBSyO87ZX5PVwdHm-=dBjZYECGmfnydUicUyrQqndgX2MQ@mail.gmail.com [1] Link: https://lkml.kernel.org/r/20220304184040.1304781-1-shakeelb@google.com Fixes: 1f828223 ("memcg: flush lruvec stats in the refault") Signed-off-by: Shakeel Butt <shakeelb@google.com> Reported-by: Daniel Dao <dqminh@cloudflare.com> Tested-by: Ivan Babrou <ivan@cloudflare.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Frank Hofmann <fhofmann@cloudflare.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xu Yu authored
commit d173d541 upstream. Kernel panic when injecting memory_failure for the global huge_zero_page, when CONFIG_DEBUG_VM is enabled, as follows. Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000 page:00000000fb053fc3 refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x109e00 head:00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0 flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 017fffc000010001 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000002ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head)) ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:2499! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 3288b3c 04/01/2014 RIP: 0010:split_huge_page_to_list+0x66a/0x880 Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b RSP: 0018:ffffc90000dcbdf8 EFLAGS: 00010246 RAX: 000000000000003c RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff823e4c4f RDI: 00000000ffffffff RBP: ffff88843fffdb40 R08: 0000000000000000 R09: 00000000fffeffff R10: ffffc90000dcbc48 R11: ffffffff82d68448 R12: ffffea0004278000 R13: ffffffff823c6203 R14: 0000000000109ff9 R15: ffffea000427fe40 FS: 00007fc375a26740(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc3757c9290 CR3: 0000000102174006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: try_to_split_thp_page+0x3a/0x130 memory_failure+0x128/0x800 madvise_inject_error.cold+0x8b/0xa1 __x64_sys_madvise+0x54/0x60 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc3754f8bf9 Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffeda93a1d8 EFLAGS: 00000217 ORIG_RAX: 000000000000001c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc3754f8bf9 RDX: 0000000000000064 RSI: 0000000000003000 RDI: 0000000020ff9000 RBP: 00007ffeda93a200 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000217 R12: 0000000000400490 R13: 00007ffeda93a2e0 R14: 0000000000000000 R15: 0000000000000000 This makes huge_zero_page bail out explicitly before split in memory_failure(), thus the panic above won't happen again. Link: https://lkml.kernel.org/r/497d3835612610e370c74e697ea3c721d1d55b9c.1649775850.git.xuyu@linux.alibaba.com Fixes: 6a46079c ("HWPOISON: The high level memory error handler in the VM v7") Signed-off-by: Xu Yu <xuyu@linux.alibaba.com> Reported-by: Abaci <abaci@linux.alibaba.com> Suggested-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shubhrajyoti Datta authored
commit e2932d1f upstream. Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a0 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
[ Upstream commit 66dd346b ] Qemu unconditionally reports a UUID, which depending on the qemu version is either all-null (which is incorrect but harmless) or contains a single bit set for all controllers. In addition it can also optionally report a eui64 which needs to be manually set. Disable namespace identifiers for Qemu controlles entirely even if in some cases they could be set correctly through manual intervention. Reported-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christoph Hellwig authored
[ Upstream commit a98a945b ] The MAXIO MAP1002/1202 controllers reports completely bogus Namespace identifiers that even change after suspend cycles. Disable using the Identifiers entirely. Reported-by: 金韬 <me@kingtous.cn> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Tested-by: 金韬 <me@kingtous.cn> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christoph Hellwig authored
[ Upstream commit 00ff400e ] Add a quirk to disable using and exporting namespace identifiers for controllers where they are broken beyond repair. The most directly visible problem with non-unique namespace identifiers is that they break the /dev/disk/by-id/ links, with the link for a supposedly unique identifier now pointing to one of multiple possible namespaces that share the same ID, and a somewhat random selection of which one actually shows up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
NeilBrown authored
[ Upstream commit b3d4650d ] When asked to create a path ending '/', but which is not to be a directory (LOOKUP_DIRECTORY not set), filename_create() will never try to create the file. If it doesn't exist, -ENOENT is reported. However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems ->lookup() function, even though there is no intent to create. This is misleading and can cause incorrect behaviour. If you try ln -s foo /path/dir/ where 'dir' is a directory on an NFS filesystem which is not currently known in the dcache, this will fail with ENOENT. But as the name is not in the dcache, nfs_lookup gets called with LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any lookup, with the expectation that a subsequent call to create the target will be made, and the lookup can be combined with the creation. In the case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never made. Instead filename_create() sees that the dentry is not (yet) positive and returns -ENOENT - even though the directory actually exists. So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to create, and use the absence of these flags to decide if -ENOENT should be returned. Note that filename_parentat() is only interested in LOOKUP_REVAL, so we split that out and store it in 'reval_flag'. __lookup_hash() then gets reval_flag combined with whatever create flags were determined to be needed. Reviewed-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mikulas Patocka authored
[ Upstream commit 932aba1e ] struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit st_dev and st_rdev; struct compat_stat (defined in arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by a 16-bit padding. This patch fixes struct compat_stat to match struct stat. [ Historical note: the old x86 'struct stat' did have that 16-bit field that the compat layer had kept around, but it was changes back in 2003 by "struct stat - support larger dev_t": https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d and back in those days, the x86_64 port was still new, and separate from the i386 code, and had already picked up the old version with a 16-bit st_dev field ] Note that we can't change compat_dev_t because it is used by compat_loop_info. Also, if the st_dev and st_rdev values are 32-bit, we don't have to use old_valid_dev to test if the value fits into them. This fixes -EOVERFLOW on filesystems that are on NVMe because NVMe uses the major number 259. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit 857b0652 ] We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is created. Then in qedi_set_path we kick off the offload work. If userspace times out the connection and calls ep_disconnect, qedi will only flush the offload work if the qedi_ep state has transitioned away from EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned state and will leave the offload work running, and we will free the qedi_ep from under it. This patch just has us init the work when we create the ep, then always flush it. Link: https://lore.kernel.org/r/20220408001314.5014-10-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit 44ac9710 ] If a offload driver doesn't use the xmit workqueue, then when we are doing ep_disconnect libiscsi can still inject PDUs to the driver. This adds a check for if the connection is bound before trying to inject PDUs. Link: https://lore.kernel.org/r/20220408001314.5014-9-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit 5bd85625 ] Move the tx and rx suspend fields into one flags field. Link: https://lore.kernel.org/r/20220408001314.5014-8-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit 3c6ae371 ] We can't release the endpoint ID until all references to the endpoint have been dropped or it could be allocated while in use. This has us use an idr instead of looping over all conns to find a free ID and then free the ID when all references have been dropped instead of when the device is only deleted. Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Reviewed-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tomas Melin authored
[ Upstream commit 5ad7f18c ] commit 42983885 ("net: macb: restart tx after tx used bit read") added support for restarting transmission. Restarting tx does not work in case controller asserts TXUBR interrupt and TQBP is already at the end of the tx queue. In that situation, restarting tx will immediately cause assertion of another TXUBR interrupt. The driver will end up in an infinite interrupt loop which it cannot break out of. For cases where TQBP is at the end of the tx queue, instead only clear TX_USED interrupt. As more data gets pushed to the queue, transmission will resume. This issue was observed on a Xilinx Zynq-7000 based board. During stress test of the network interface, driver would get stuck on interrupt loop within seconds or minutes causing CPU to stall. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xiaoke Wang authored
[ Upstream commit 047ae665 ] kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Besides, since mdp5_plane_reset() is void type, so we should better set `plane-state` to NULL after releasing it. Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481055/ Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lv Ruyi authored
[ Upstream commit 1a7eb80d ] Both of of_get_parent() and of_parse_phandle() return node pointer with refcount incremented, use of_node_put() on it to decrease refcount when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Borislav Petkov authored
[ Upstream commit 6fb3a586 ] Fix: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17): ^~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13): ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: brcm80211-dev-list.pdl@broadcom.com Cc: netdev@vger.kernel.org Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic Signed-off-by: Sasha Levin <sashal@kernel.org>
-