The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND,
rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG
controller), ethernet, 3.5 mm jack with a/v out and hdmi out.

Note it has no sdcard slot and therefore can only be fel booted.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add a dtsi file for A31s based boards.

Since the  A31s is the same die as the A31 in a different package, this dtsi
simply includes sun6i-a31.dtsi and then overrides the pinctrl compatible to
reflect the different package, everything else is identical.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Mele M9 has an ir receiver, enable it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add a node for the ir receiver found on the A31.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[Maxime: Added a node label]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add an ir_clk sub-node to the prcm node.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Only SPI0 is enabled, as the schematic denotes it as the only SPI bus,
while other pins are reserved for different peripherals.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

These are based on the available SPI configurations of Cubieboard,
Olimex LIME, and PcDuino. There is no pin group for SPI3, as all the
boards seem to use those pins for EMAC.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

On the Hummingbird A31 board, the RTL8211E ethernet phy has its reset
line connect to a gpio pin, instead of floating like on other boards.
Add the stmmac properties for describing the reset gpio.

The reset delays were taken from the RTL8211E datasheet.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Add pinmux settings for the ir receive pin of the A31.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Testing has shown that on sun4i the display backend engine does not have
deep enough fifo-s causing flickering / tearing in full-hd mode due to
fifo underruns. This can be avoided by letting the display frontend engine
do the dma from memory, and then letting it feed the data directly into
the backend unmodified, as the frontend does have deep enough fifo-s.

Note since u-boot-v2015.01 has been released using the de_be0-lcd0-hdmi
pipeline on sun4i, we need to keep that one around too (unfortunately).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Ippo q8h has its serial console connected to the r-uart. Adjust the
serial0 alias to match.

This fixes the kernel serial console no longer working since 3.19-rc1, because
8250_dw.c now honors dt aliases, causing the serial console to be ttyS5 rather
then being ttyS0, as it was in 3.18 and before.

Note that adjusting bootargs instead is not an acceptable fix, because
console=ttyS0,115200 is used by a lot of bootscripts, etc. and this should
continue to work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

usbphy0 support in the sunxi usb-phy driver has been merged, but the
dtsi's for sun4i/sun5i haven't been updated. This results in the phy
driver failing to load, breaking usb support.

Fixes: 6827a46f

 ('phy: sun4i: add support for USB phy0')
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Pull ACCESS_ONCE cleanup preparation from Christian Borntraeger:
 "kernel: Provide READ_ONCE and ASSIGN_ONCE

  As discussed on LKML http://marc.info/?i=54611D86.4040306%40de.ibm.com
  ACCESS_ONCE might fail with specific compilers for non-scalar
  accesses.

  Here is a set of patches to tackle that problem.

  The first patch introduce READ_ONCE and ASSIGN_ONCE.  If the data
  structure is larger than the machine word size memcpy is used and a
  warning is emitted.  The next patches fix up several in-tree users of
  ACCESS_ONCE on non-scalar types.

  This does not yet contain a patch that forces ACCESS_ONCE to work only
  on scalar types.  This is targetted for the next merge window as Linux
  next already contains new offenders regarding ACCESS_ONCE vs.
  non-scalar types"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux:
  s390/kvm: REPLACE barrier fixup with READ_ONCE
  arm/spinlock: Replace ACCESS_ONCE with READ_ONCE
  arm64/spinlock: Replace ACCESS_ONCE READ_ONCE
  mips/gup: Replace ACCESS_ONCE with READ_ONCE
  x86/gup: Replace ACCESS_ONCE with READ_ONCE
  x86/spinlock: Replace ACCESS_ONCE with READ_ONCE
  mm: replace ACCESS_ONCE with READ_ONCE or barriers
  kernel: Provide READ_ONCE and ASSIGN_ONCE

Pull clk framework updates from Mike Turquette:
 "This is much later than usual due to several last minute bugs that had
  to be addressed.  As usual the majority of changes are new drivers and
  modifications to existing drivers.  The core recieved many fixes along
  with the groundwork for several large changes coming in the future
  which will better parition clock providers from clock consumers"

* tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
  clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated
  ARM: OMAP3: clock: fix boot breakage in legacy mode
  ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs
  clk: Really fix deadlock with mmap_sem
  clk: mmp: fix sparse non static symbol warning
  clk: Change clk_ops->determine_rate to return a clk_hw as the best parent
  clk: change clk_debugfs_add_file to take a struct clk_hw
  clk: Don't expose __clk_get_accuracy
  clk: Don't try to use a struct clk* after it could have been freed
  clk: Remove unused function __clk_get_prepare_count
  clk: samsung: Fix double add of syscore ops after driver rebind
  clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmi
  clk: samsung: exynos4415: Fix build with PM_SLEEP disabled
  clk: samsung: remove unnecessary inclusion of header files from clk.h
  clk: samsung: remove unnecessary CONFIG_OF from clk.c
  clk: samsung: Spelling s/bwtween/between/
  clk: rockchip: Add support for the mmc clock phases using the framework
  clk: rockchip: add bindings for the mmc clocks
  clk: rockchip: rk3288 export i2s0_clkout for use in DT
  clk: rockchip: use clock ID for DMC (memory controller) on rk3288
  ...

Pull more i2c updates from Wolfram Sang:
 "Included are two bugfixes needing some bigger refactoring (sh_mobile:
  deferred probe with DMA, mv64xxx: fix offload support) and one
  deprecated driver removal I thought would go in via ppc but I
  misunderstood.  It has a proper ack from BenH"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sh_mobile: fix uninitialized var when debug is enabled
  macintosh: therm_pm72: delete deprecated driver
  i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  i2c: sh_mobile: rework deferred probing
  i2c: sh_mobile: refactor DMA setup
  i2c: mv64xxx: rework offload support to fix several problems
  i2c: mv64xxx: use BIT() macro for register value definitions

Pull SCSI update from James Bottomley:
 "This is a much shorter set of patches that were on the go but didn't
  make it in to the early pull request for the merge window.  It's
  really a set of bug fixes plus some final cleanup work on the new tag
  queue API"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  storvsc: ring buffer failures may result in I/O freeze
  ipr: set scsi_level correctly for disk arrays
  ipr: add support for async scanning to speed up boot
  scsi_debug: fix missing "break;" in SDEBUG_UA_CAPACITY_CHANGED case
  scsi_debug: take sdebug_host_list_lock when changing capacity
  scsi_debug: improve driver description in Kconfig
  scsi_debug: fix compare and write errors
  qla2xxx: fix race in handling rport deletion during recovery causes panic
  scsi: blacklist RSOC for Microsoft iSCSI target devices
  scsi: fix random memory corruption with scsi-mq + T10 PI
  Revert "[SCSI] mpt3sas: Remove phys on topology change"
  Revert "[SCSI] mpt2sas: Remove phys on topology change."
  esas2r: Correct typos of "validate" in a comment
  fc: FCP_PTA_SIMPLE is 0
  ibmvfc: remove unused tag variable
  scsi: remove MSG_*_TAG defines
  scsi: remove scsi_set_tag_type
  scsi: remove scsi_get_tag_type
  scsi: never drop to untagged mode during queue ramp down
  scsi: remove ->change_queue_type method

Pull CONFIG_PM_RUNTIME elimination from Rafael Wysocki:
 "This removes the last few uses of CONFIG_PM_RUNTIME introduced
  recently and makes that config option finally go away.

  CONFIG_PM will be available directly from the menu now and also it
  will be selected automatically if CONFIG_SUSPEND or CONFIG_HIBERNATION
  is set"

* tag 'pm-config-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: Eliminate CONFIG_PM_RUNTIME
  tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM

Pull misc kbuild changes from Michal Marek:
 "There are only a few things in the misc branch:

   - Fix for bugon.cocci semantic patch
   - Kdevelop4 files are .gitignored
   - Put make binrpm-pkg on diet"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/package: binrpm-pkg do not create source and devel package
  .gitignore: Add Kdevelop4 project files
  bugon.cocci: fix Options at the macro

Pull kbuild updates from Michal Marek:
 "Here are the kbuild changes for v3.19-rc1:

   - Cleanups and deduplication in the main Makefile and
     scripts/Makefile.*
   - Sort the output of *config targets in make help
   - Old <linux/version.h> is always removed to avoid a surprise during
     bisecting
   - Warning fix in kconfig"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: remove redundant -rR flag of hdr-inst
  kbuild: Fix make help-<board series> on powerpc
  kbuild: Automatically remove stale <linux/version.h> file
  kconfig: Fix warning "‘jump’ may be used uninitialized"
  Makefile: sort list of defconfig targets in make help output
  kbuild: Remove duplicate $(cmd) definition in Makefile.clean
  kbuild: collect shorthands into scripts/Kbuild.include

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pull vfs pile #3 from Al Viro:
 "Assorted fixes and patches from the last cycle"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  [regression] chunk lost from bd9b51
  vfs: make mounts and mountstats honor root dir like mountinfo does
  vfs: cleanup show_mountinfo
  init: fix read-write root mount
  unfuck binfmt_misc.c (broken by commit e6084d4a)
  vm_area_operations: kill ->migrate()
  new helper: iter_is_iovec()
  move_extent_per_page(): get rid of unused w_flags
  lustre: get rid of playing with ->fs
  btrfs: filp_open() returns ERR_PTR() on failure, not NULL...

Merge tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull eCryptfs fixes from Tyler Hicks:
 "Fixes for filename decryption and encrypted view plus a cleanup

   - The filename decryption routines were, at times, writing a zero
     byte one character past the end of the filename buffer

   - The encrypted view feature attempted, and failed, to roll its own
     form of enforcing a read-only mount instead of letting the VFS
     enforce it"

* tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  eCryptfs: Remove buggy and unnecessary write in file name decode routine
  eCryptfs: Remove unnecessary casts when parsing packet lengths
  eCryptfs: Force RO mount when encrypted view is enabled

Pull more btrfs updates from Chris Mason:
 "This is part two of our merge window patches.

  These are all from Filipe, and fix some really hard to find races that
  can cause corruptions.  Most of them involved block group removal
  (balance) or discard"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: remove non-sense btrfs_error_discard_extent() function
  Btrfs: fix fs corruption on transaction abort if device supports discard
  Btrfs: always clear a block group node when removing it from the tree
  Btrfs: ensure deletion from pinned_chunks list is protected

Pull sound fixes from Takashi Iwai:
 "Here are a few fixes that have landed after the previous pull request.
  All are driver specific fixes including:

   - error/int value fixes in OXFW,
   - Intel Skylake HD-audio HDMI codec support,
   - Additional HD-audio Realtek codecs and AD1986A codec fixes/quirks,
   - a few more DSD support and a quirk for Arcam rPAC in usb-audio,
   - a typo fix for Scarlett 6i6,
   - fixes for new ASIHPI firmware,
   - ASoC Exynos7 cleanups,
   - Intel ACPI support, and
   - a fix for PCM512 register cache sync"

* tag 'sound-fix-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPAC
  ALSA: hda/realtek - New codec support for ALC298
  ALSA: asihpi: update to HPI version 4.14
  ALSA: asihpi: increase tuner pad cache size
  ALSA: asihpi: relax firmware version check
  ALSA: usb-audio: Fix Scarlett 6i6 initialization typo
  ALSA: hda - Add quirk for Packard Bell EasyNote MX65
  ALSA: usb-audio: add native DSD support for Matrix Audio DACs
  ALSA: hda/realtek - New codec support for ALC256
  ALSA: hda/realtek - Add new Dell desktop for ALC3234 headset mode
  ASoC: Intel: fix possible acpi enumeration panic
  ALSA: hda/hdmi - apply Haswell fix-ups to Skylake display codec
  ASoC: Intel: fix return value check in sst_acpi_probe()
  ALSA: hda - Make add_stereo_mix_input flag tristate
  ALSA: hda - Create capture source ctls when stereo mix input is added
  ALSA: hda - Fix typos in snd_hda_get_int_hint() kerneldoc comments
  ALSA: hda - add codec ID for Skylake display audio codec
  ALSA: oxfw: some signedness bugs
  ALSA: oxfw: fix detect_loud_models() return value
  ASoC: rt5677: add REGMAP_I2C and REGMAP_IRQ dependency
  ...

Pull SCSI target fixes from Nicholas Bellinger:
 "The highlights this merge window include:

   - Allow target fabric drivers to function as built-in.  (Roland)
   - Fix tcm_loop multi-TPG endpoint nexus bug.  (Hannes)
   - Move per device config_item_type into se_subsystem_api, allowing
     configfs attributes to be defined at module_init time.  (Jerome +
     nab)
   - Convert existing IBLOCK/FILEIO/RAMDISK/PSCSI/TCMU drivers to use
     external configfs attributes.  (nab)
   - A number of iser-target fixes related to active session + network
     portal shutdown stability during extended stress testing.  (Sagi +
     Slava)
   - Dynamic allocation of T10-PI contexts for iser-target, fixing a
     potentially bogus iscsi_np->tpg_np pointer reference in >= v3.14
     code.  (Sagi)
   - iser-target performance + scalability improvements.  (Sagi)
   - Fixes for SPC-4 Persistent Reservation AllRegistrants spec
     compliance.  (Ilias + James + nab)
   - Avoid potential short kern_sendmsg() in iscsi-target for now until
     Al's conversion to use msghdr iteration is merged post -rc1.
     (Viro)

  Also, Sagi has requested a number of iser-target patches (9) that
  address stability issues he's encountered during extended stress
  testing be considered for v3.10.y + v3.14.y code.  Given the amount of
  LOC involved, it will certainly require extra backporting effort.

  Apologies in advance to Greg-KH & Co on this.  Sagi and I will be
  working post-merge to ensure they each get applied correctly"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (53 commits)
  target: Allow AllRegistrants to re-RESERVE existing reservation
  uapi/linux/target_core_user.h: fix headers_install.sh badness
  iscsi-target: Fail connection on short sendmsg writes
  iscsi-target: nullify session in failed login sequence
  target: Avoid dropping AllRegistrants reservation during unregister
  target: Fix R_HOLDER bit usage for AllRegistrants
  iscsi-target: Drop left-over bogus iscsi_np->tpg_np
  iser-target: Fix wc->wr_id cast warning
  iser-target: Remove code duplication
  iser-target: Adjust log levels and prettify some prints
  iser-target: Use debug_level parameter to control logging level
  iser-target: Fix logout sequence
  iser-target: Don't wait for session commands from completion context
  iser-target: Reduce CQ lock contention by batch polling
  iser-target: Introduce isert_poll_budget
  iser-target: Remove an atomic operation from the IO path
  iser-target: Remove redundant call to isert_conn_terminate
  iser-target: Use single CQ for TX and RX
  iser-target: Centralize completion elements to a context
  iser-target: Cast wr_id with uintptr_t instead of unsinged long
  ...

Pull arch/hexagon updates from Richard Kuo:
 "Build cleanup and a few misc fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
  Hexagon: fix signal delivery for debug traps
  Hexagon: set ARCH_DMA_MINALIGN
  Hexagon: fix alignment of init_task in RW_DATA_SECTION
  hexagon: Fix build failures in linux-next

Pull arch/chris updates from Jesper Nilsson:
 "Mostly cleanup and build fixes for CRISv32 allmodconfig

  God Jul och Gott Nytt år!"

* tag 'cris-changes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  CRISv32: Remove last remnants of ETRAX_SPI_MMC_BOARD
  CRISv32: ETRAXFS: Fix recursive spinlock
  CRISv32: Select MTDRAM for axisflashmap
  CRISv32: Implement early console
  CRIS: Use KALLSYMs if available in call stack dump
  CRISv32: Fix declaration mismatch
  CRISv32: Rewrite of synchronous serial port driver
  CRIS: Update init memory handling
  CRISv32: Better handling of watchdog bite
  CRIS: Export missing function symbols
  CRIS: Export ioremap_nocache
  CRIS: Fix headers_install
  CRISv32: Add missing include for mm.h
  CRISv32: Drop obsolete file for SPI driver

Pull ia64 __get_cpu_var removal from Tony Luck:
 "__get_cpu_var removed from rest of tree, drop reference from comments
  in arch/ia64"

* tag 'please-pull-misc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Update comment that references __get_cpu_var

There are no users of this symbol left.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Move pinmux alloc/dealloc code into functions that don't take
the spinlock so we can use from code that has the spinlock already.

CRISv32 has no working SMP, so spinlocks becomes a NOP,
so deadlock was never seen.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Fixes compile error on allmodconfig.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Also, print kernel version on oops.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Drop i2c_init from this header, it was declared non-static here,
but static in the C-file.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Make driver possible to load as a module and try to handle
locking better.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

- Add free_initrd_mem as found by Guenter Roeck <linux@roeck-us.net>
- Add free_init_pages
- Export empty_zero_page symbol

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>