- Jan 15, 2022
-
-
Jing Liu authored
Extend CPUID emulation to support XFD, AMX_TILE, AMX_INT8 and AMX_BF16. Adding those bits into kvm_cpu_caps finally activates all previous logics in this series. Hide XFD on 32bit host kernels. Otherwise it leads to a weird situation where KVM tells userspace to migrate MSR_IA32_XFD and then rejects attempts to read/write the MSR. Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-17-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
Two XCR0 bits are defined for AMX to support XSAVE mechanism. Bit 17 is for tilecfg and bit 18 is for tiledata. The value of XCR0[17:18] is always either 00b or 11b. Also, SDM recommends that only 64-bit operating systems enable Intel AMX by setting XCR0[18:17]. 32-bit host kernel never sets the tile bits in vcpu->arch.guest_supported_xcr0. Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-16-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
This saves one unnecessary VM-exit in guest #NM handler, given that the MSR is already restored with the guest value before the guest is resumed. Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-15-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
Emulate read/write to IA32_XFD_ERR MSR. Only the saved value in the guest_fpu container is touched in the emulation handler. Actual MSR update is handled right before entering the guest (with preemption disabled) Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Zeng Guang <guang.zeng@intel.com> Signed-off-by:
Wei Wang <wei.w.wang@intel.com> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-14-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
Guest IA32_XFD_ERR is generally modified in two places: - Set by CPU when #NM is triggered; - Cleared by guest in its #NM handler; Intercept #NM for the first case when a nonzero value is written to IA32_XFD. Nonzero indicates that the guest is willing to do dynamic fpstate expansion for certain xfeatures, thus KVM needs to manage and virtualize guest XFD_ERR properly. The vcpu exception bitmap is updated in XFD write emulation according to guest_fpu::xfd. Save the current XFD_ERR value to the guest_fpu container in the #NM VM-exit handler. This must be done with interrupt disabled, otherwise the unsaved MSR value may be clobbered by host activity. The saving operation is conducted conditionally only when guest_fpu:xfd includes a non-zero value. Doing so also avoids misread on a platform which doesn't support XFD but #NM is triggered due to L1 interception. Queueing #NM to the guest is postponed to handle_exception_nmi(). This goes through the nested_vmx check so a virtual vmexit is queued instead when #NM is triggered in L2 but L1 wants to intercept it. Restore the host value (always ZERO outside of the host #NM handler) before enabling interrupt. Restore the guest value from the guest_fpu container right before entering the guest (with interrupt disabled). Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-13-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
When XFD causes an instruction to generate #NM, IA32_XFD_ERR contains information about which disabled state components are being accessed. The #NM handler is expected to check this information and then enable the state components by clearing IA32_XFD for the faulting task (if having permission). If the XFD_ERR value generated in guest is consumed/clobbered by the host before the guest itself doing so, it may lead to non-XFD-related #NM treated as XFD #NM in host (due to non-zero value in XFD_ERR), or XFD-related #NM treated as non-XFD #NM in guest (XFD_ERR cleared by the host #NM handler). Introduce a new field in fpu_guest to save the guest xfd_err value. KVM is expected to save guest xfd_err before interrupt is enabled and restore it right before entering the guest (with interrupt disabled). Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-12-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
Intel's eXtended Feature Disable (XFD) feature allows the software to dynamically adjust fpstate buffer size for XSAVE features which have large state. Because guest fpstate has been expanded for all possible dynamic xstates at KVM_SET_CPUID2, emulation of the IA32_XFD MSR is straightforward. For write just call fpu_update_guest_xfd() to update the guest fpu container once all the sanity checks are passed. For read simply return the cached value in the container. Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Zeng Guang <guang.zeng@intel.com> Signed-off-by:
Wei Wang <wei.w.wang@intel.com> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-11-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Kevin Tian authored
Guest XFD can be updated either in the emulation path or in the restore path. Provide a wrapper to update guest_fpu::fpstate::xfd. If the guest fpstate is currently in-use, also update the per-cpu xfd cache and the actual MSR. Signed-off-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-10-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
KVM can request fpstate expansion in two approaches: 1) When intercepting guest updates to XCR0 and XFD MSR; 2) Before vcpu runs (e.g. at KVM_SET_CPUID2); The first option doesn't waste memory for legacy guest if it doesn't support XFD. However doing so introduces more complexity and also imposes an order requirement in the restoring path, i.e. XCR0/XFD must be restored before XSTATE. Given that the agreement is to do the static approach. This is considered a better tradeoff though it does waste 8K memory for legacy guest if its CPUID includes dynamically-enabled xfeatures. Successful fpstate expansion requires userspace VMM to acquire guest xstate permissions before calling KVM_SET_CPUID2. Also take the chance to adjust the indent in kvm_set_cpuid(). Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-9-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Provide a wrapper for expanding the guest fpstate buffer according to requested xfeatures. KVM wants to call this wrapper to manage any dynamic xstate used by the guest. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220105123532.12586-8-yang.zhong@intel.com> [Remove unnecessary 32-bit check. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Thomas Gleixner authored
Guest support for dynamically enabled FPU features requires a few modifications to the enablement function which is currently invoked from the #NM handler: 1) Use guest permissions and sizes for the update 2) Update fpu_guest state accordingly 3) Take into account that the enabling can be triggered either from a running guest via XSETBV and MSR_IA32_XFD write emulation or from a guest restore. In the latter case the guests fpstate is not the current tasks active fpstate. Split the function and implement the guest mechanics throughout the callchain. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-7-yang.zhong@intel.com> [Add 32-bit stub for __xfd_enable_feature. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
vCPU threads are different from native tasks regarding to the initial XFD value. While all native tasks follow a fixed value (init_fpstate::xfd) established by the FPU core at boot, vCPU threads need to obey the reset value (i.e. ZERO) defined by the specification, to meet the expectation of the guest. Let the caller supply an argument and adjust the host and guest related invocations accordingly. Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-6-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Jan 08, 2022
-
-
Jing Liu authored
KVM_GET_SUPPORTED_CPUID should not include any dynamic xstates in CPUID[0xD] if they have not been requested with prctl. Otherwise a process which directly passes KVM_GET_SUPPORTED_CPUID to KVM_SET_CPUID2 would now fail even if it doesn't intend to use a dynamically enabled feature. Userspace must know that prctl is required and allocate >4K xstate buffer before setting any dynamic bit. Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-5-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
CPUID.0xD.1.EBX enumerates the size of the XSAVE area (in compacted format) required by XSAVES. If CPUID.0xD.i.ECX[1] is set for a state component (i), this state component should be located on the next 64-bytes boundary following the preceding state component in the compacted layout. Fix xstate_required_size() to follow the alignment rule. AMX is the first state component with 64-bytes alignment to catch this bug. Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-4-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Thomas Gleixner authored
To support dynamically enabled FPU features for guests prepare the guest pseudo FPU container to keep track of the currently enabled xfeatures and the guest permissions. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-3-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Thomas Gleixner authored
KVM requires a clear separation of host user space and guest permissions for dynamic XSTATE components. Add a guest permissions member to struct fpu and a separate set of prctl() arguments: ARCH_GET_XCOMP_GUEST_PERM and ARCH_REQ_XCOMP_GUEST_PERM. The semantics are equivalent to the host user space permission control except for the following constraints: 1) Permissions have to be requested before the first vCPU is created 2) Permissions are frozen when the first vCPU is created to ensure consistency. Any attempt to expand permissions via the prctl() after that point is rejected. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-2-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Michael Roth authored
Now that core kvm_util declarations have special home in kvm_util_base.h, move ucall-related declarations out into a separate header. Signed-off-by:
Michael Roth <michael.roth@amd.com> Message-Id: <20211210164620.11636-3-michael.roth@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Michael Roth authored
Between helper macros and interfaces that will be introduced in subsequent patches, much of kvm_util.h would end up being declarations specific to ucall. Ideally these could be separated out into a separate header since they are not strictly required for writing guest tests and are mostly self-contained interfaces other than a reliance on a few core declarations like struct kvm_vm. This doesn't make a big difference as far as how tests will be compiled/written since all these interfaces will still be packaged up into a single/common libkvm.a used by all tests, but it is still nice to be able to compartmentalize to improve readabilty and reduce merge conflicts in the future for common tasks like adding new interfaces to kvm_util.h. Furthermore, some of the ucall declarations will be arch-specific, requiring various #ifdef'ery in kvm_util.h. Ideally these declarations could live in separate arch-specific headers, e.g. include/<arch>/ucall.h, which would handle arch-specific declarations as well as pulling in common ucall-related declarations shared by all archs. One simple way to do this would be to #include ucall.h at the bottom of kvm_util.h, after declarations it relies upon like struct kvm_vm. This is brittle however, and doesn't scale easily to other sets of interfaces that may be added in the future. Instead, move all declarations currently in kvm_util.h into kvm_util_base.h, then have kvm_util.h #include it. With this change, non-base declarations can be selectively moved/introduced into separate headers, which can then be included in kvm_util.h so that individual tests don't need to be touched. Subsequent patches will then move ucall-related declarations into a separate header to meet the above goals. Signed-off-by:
Michael Roth <michael.roth@amd.com> Message-Id: <20211210164620.11636-2-michael.roth@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Jan 07, 2022
-
-
Michael Roth authored
Normally guests will set up CR3 themselves, but some guests, such as kselftests, and potentially CONFIG_PVH guests, rely on being booted with paging enabled and CR3 initialized to a pre-allocated page table. Currently CR3 updates via KVM_SET_SREGS* are not loaded into the guest VMCB until just prior to entering the guest. For SEV-ES/SEV-SNP, this is too late, since it will have switched over to using the VMSA page prior to that point, with the VMSA CR3 copied from the VMCB initial CR3 value: 0. Address this by sync'ing the CR3 value into the VMCB save area immediately when KVM_SET_SREGS* is issued so it will find it's way into the initial VMSA. Suggested-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Michael Roth <michael.roth@amd.com> Message-Id: <20211216171358.61140-10-michael.roth@amd.com> [Remove vmx_post_set_cr3; add a remark about kvm_set_cr3 not calling the new hook. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Zijlstra authored
Use asm-goto-output for smaller fast path code. Message-Id: <YbcbbGW2GcMx6KpD@hirez.programming.kicks-ass.net> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
When dirty ring logging is enabled, any dirty logging without an active vCPU context will cause a kernel oops. But we've already declared that the shared_info page doesn't get dirty tracking anyway, since it would be kind of insane to mark it dirty every time we deliver an event channel interrupt. Userspace is supposed to just assume it's always dirty any time a vCPU can run or event channels are routed. So stop using the generic kvm_write_wall_clock() and just write directly through the gfn_to_pfn_cache that we already have set up. We can make kvm_write_wall_clock() static in x86.c again now, but let's not remove the 'sec_hi_ofs' argument even though it's not used yet. At some point we *will* want to use that for KVM guests too. Fixes: 629b5348 ("KVM: x86/xen: update wallclock region") Reported-by:
butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-6-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
This adds basic support for delivering 2 level event channels to a guest. Initially, it only supports delivery via the IRQ routing table, triggered by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast() function which will use the pre-mapped shared_info page if it already exists and is still valid, while the slow path through the irqfd_inject workqueue will remap the shared_info page if necessary. It sets the bits in the shared_info page but not the vcpu_info; that is deferred to __kvm_xen_has_interrupt() which raises the vector to the appropriate vCPU. Add a 'verbose' mode to xen_shinfo_test while adding test cases for this. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-5-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
Use the newly reinstated gfn_to_pfn_cache to maintain a kernel mapping of the Xen shared_info page so that it can be accessed in atomic context. Note that we do not participate in dirty tracking for the shared info page and we do not explicitly mark it dirty every single tim we deliver an event channel interrupts. We wouldn't want to do that even if we *did* have a valid vCPU context with which to do so. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-4-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
The various kvm_write_guest() and mark_page_dirty() functions must only ever be called in the context of an active vCPU, because if dirty ring tracking is enabled it may simply oops when kvm_get_running_vcpu() returns NULL for the vcpu and then kvm_dirty_ring_get() dereferences it. This oops was reported by "butt3rflyh4ck" <butterflyhuangxx@gmail.com> in https://lore.kernel.org/kvm/CAFcO6XOmoS7EacN_n6v4Txk7xL7iqRa2gABg3F7E3Naf5uG94g@mail.gmail.com/ That actual bug will be fixed under separate cover but this warning should help to prevent new ones from being added. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-2-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
I made the actual CPU bringup go nice and fast... and then Linux spends half a minute printing stupid nonsense about clocks and steal time for each of 256 vCPUs. Don't do that. Nobody cares. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211209150938.3518-12-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Eric Hankland authored
When KVM retires a guest branch instruction through emulation, increment any vPMCs that are configured to monitor "branch instructions retired," and update the sample period of those counters so that they will overflow at the right time. Signed-off-by:
Eric Hankland <ehankland@google.com> [jmattson: - Split the code to increment "branch instructions retired" into a separate commit. - Moved/consolidated the calls to kvm_pmu_trigger_event() in the emulation of VMLAUNCH/VMRESUME to accommodate the evolution of that code. ] Fixes: f5132b01 ("KVM: Expose a version 2 architectural PMU to a guests") Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20211130074221.93635-7-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Eric Hankland authored
When KVM retires a guest instruction through emulation, increment any vPMCs that are configured to monitor "instructions retired," and update the sample period of those counters so that they will overflow at the right time. Signed-off-by:
Eric Hankland <ehankland@google.com> [jmattson: - Split the code to increment "branch instructions retired" into a separate commit. - Added 'static' to kvm_pmu_incr_counter() definition. - Modified kvm_pmu_incr_counter() to check pmc->perf_event->state == PERF_EVENT_STATE_ACTIVE. ] Fixes: f5132b01 ("KVM: Expose a version 2 architectural PMU to a guests") Signed-off-by:
Jim Mattson <jmattson@google.com> [likexu: - Drop checks for pmc->perf_event or event state or event type - Increase a counter once its umask bits and the first 8 select bits are matched - Rewrite kvm_pmu_incr_counter() with a less invasive approach to the host perf; - Rename kvm_pmu_record_event to kvm_pmu_trigger_event; - Add counter enable and CPL check for kvm_pmu_trigger_event(); ] Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-6-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
Depending on whether intr should be triggered or not, KVM registers two different event overflow callbacks in the perf_event context. The code skeleton of these two functions is very similar, so the pmc->intr can be stored into pmc from pmc_reprogram_counter() which provides smaller instructions footprint against the u-architecture branch predictor. The __kvm_perf_overflow() can be called in non-nmi contexts and a flag is needed to distinguish the caller context and thus avoid a check on kvm_is_in_guest(), otherwise we might get warnings from suspicious RCU or check_preemption_disabled(). Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-5-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
Since we set the same semantic event value for the fixed counter in pmc->eventsel, returning the perf_hw_id for the fixed counter via find_fixed_event() can be painlessly replaced by pmc_perf_hw_id() with the help of pmc_is_fixed() check. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-4-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
The find_arch_event() returns a "unsigned int" value, which is used by the pmc_reprogram_counter() to program a PERF_TYPE_HARDWARE type perf_event. The returned value is actually the kernel defined generic perf_hw_id, let's rename it to pmc_perf_hw_id() with simpler incoming parameters for better self-explanation. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-3-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
The current pmc->eventsel for fixed counter is underutilised. The pmc->eventsel can be setup for all known available fixed counters since we have mapping between fixed pmc index and the intel_arch_events array. Either gp or fixed counter, it will simplify the later checks for consistency between eventsel and perf_hw_id. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-2-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Because IceLake has 4 fixed performance counters but KVM only supports 3, it is possible for reprogram_fixed_counters to pass to reprogram_fixed_counter an index that is out of bounds for the fixed_pmc_events array. Ultimately intel_find_fixed_event, which is the only place that uses fixed_pmc_events, handles this correctly because it checks against the size of fixed_pmc_events anyway. Every other place operates on the fixed_counters[] array which is sized according to INTEL_PMC_MAX_FIXED. However, it is cleaner if the unsupported performance counters are culled early on in reprogram_fixed_counters. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Lai Jiangshan authored
When !CR0_PG -> CR0_PG, vcpu->arch.cr3 becomes active, but GUEST_CR3 is still vmx->ept_identity_map_addr if EPT + !URG. So VCPU_EXREG_CR3 is considered to be dirty and GUEST_CR3 needs to be updated in this case. Reported-by:
Maxim Levitsky <mlevitsk@redhat.com> Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211216021938.11752-4-jiangshanlai@gmail.com> Fixes: c62c7bd4 ("KVM: VMX: Update vmcs.GUEST_CR3 only when the guest CR3 is dirty") Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Lai Jiangshan authored
For shadow paging, the page table needs to be reconstructed before the coming VMENTER if the guest PDPTEs is changed. But not all paths that call load_pdptrs() will cause the page tables to be reconstructed. Normally, kvm_mmu_reset_context() and kvm_mmu_free_roots() are used to launch later reconstruction. The commit d81135a5("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed") skips kvm_mmu_reset_context() after load_pdptrs() when changing CR0.CD and CR0.NW. The commit 21823fbd("KVM: x86: Invalidate all PGDs for the current PCID on MOV CR3 w/ flush") skips kvm_mmu_free_roots() after load_pdptrs() when rewriting the CR3 with the same value. The commit a91a7c70("KVM: X86: Don't reset mmu context when toggling X86_CR4_PGE") skips kvm_mmu_reset_context() after load_pdptrs() when changing CR4.PGE. Guests like linux would keep the PDPTEs unchanged for every instance of pagetable, so this missing reconstruction has no problem for linux guests. Fixes: d81135a5("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed") Fixes: 21823fbd("KVM: x86: Invalidate all PGDs for the current PCID on MOV CR3 w/ flush") Fixes: a91a7c70 ("KVM: X86: Don't reset mmu context when toggling X86_CR4_PGE") Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211216021938.11752-3-jiangshanlai@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Lai Jiangshan authored
The host CR3 in the vcpu thread can only be changed when scheduling, so commit 15ad9762 ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") changed vmx.c to only save it in vmx_prepare_switch_to_guest(). However, it also has to be synced in vmx_sync_vmcs_host_state() when switching VMCS. vmx_set_host_fs_gs() is called in both places, so rename it to vmx_set_vmcs_host_state() and make it update HOST_CR3. Fixes: 15ad9762 ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211216021938.11752-2-jiangshanlai@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
This reverts commit 24cd19a2. Sean Christopherson reports: "Commit 24cd19a2 ('KVM: X86: Update mmu->pdptrs only when it is changed') breaks nested VMs with EPT in L0 and PAE shadow paging in L2. Reproducing is trivial, just disable EPT in L1 and run a VM. I haven't investigating how it breaks things." Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Gonda authored
Add tests to confirm mirror vms can only run correct subset of commands. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-4-pgonda@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Gonda authored
TEST_ASSERT in SEV ioctl was allowing errors because it checked return value was good OR the FW error code was OK. This TEST_ASSERT should require both (aka. AND) values are OK. Removes the LAUNCH_START from the mirror VM because this call correctly fails because mirror VMs cannot call this command. Currently issues with the PSP driver functions mean the firmware error is not always reset to SEV_RET_SUCCESS when a call is successful. Mainly sev_platform_init() doesn't correctly set the fw error if the platform has already been initialized. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-3-pgonda@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Gonda authored
Mirrors should not be able to call LAUNCH_START. Remove the call on the mirror to correct the test before fixing sev_ioctl() to correctly assert on this failed ioctl. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-2-pgonda@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-