We already have CONFIG_ARCH_MXC cover imx5 and imx6 dtb targets.
Remove the redundant ones with CONFIG_ARCH_IMX5 and CONFIG_SOC_IMX6Q.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This is a series from Arnd that fixes a number of compiler warnings
when building defconfigs on ARM.

* late/fixes:
  ARM: footbridge: nw_gpio_lock is raw_spin_lock
  ARM: mv78xx0: correct addr_map_cfg __initdata annotation
  ARM: footbridge: remove RTC_IRQ definition
  ARM: soc: dependency warnings for errata
  ARM: ks8695: __arch_virt_to_dma type handling
  ARM: rpc: check device_register return code in ecard_probe
  ARM: davinci: don't mark da850_register_cpufreq as __init
  ARM: iop13xx: fix iq81340sc_atux_map_irq prototype
  ARM: iop13xx: mark iop13xx_scan_bus as __devinit
  ARM: mv78xx0: mark mv78xx0_timer_init as __init_refok
  ARM: s3c24xx: fix multiple section mismatch warnings
  ARM: at91: unused variable in at91_pm_verify_clocks
  ARM: at91: skip at91_io_desc definition for NOMMU
  ARM: pxa: work around duplicate definition of GPIO24_SSP1_SFRM
  ARM: pxa: remove sharpsl_fatal_check function
  ARM: pxa: define palmte2_pxa_keys conditionally
  ARM: pxa: Wunused-result warning in viper board file
  ARM: shark: fix shark_pci_init return code

Fixed trivial conflicts in arch/arm/mach-at91/setup.c.

Signed-off-by: Olof Johansson <olof@lixom.net>

Check for framebuffer defines before declaring variables in vt8500.c
Removes a compile-time warning about unused variables.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add board files (vt8500-bv07, wm8505-ref and wm8650-mid)
to allow 'make dtbs' on arch-vt8500.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Olof Johansson <olof@lixom.net>

The compatible value shouldn't include ".txt", which was probably cut
and paste from the filename.

Reported-by: Domenico Andreoli <cavokz@gmail.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Since the complete conversion to device tree, there are no board-
specific Kconfig options left, so remove the useless Kconfig entry.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Unit addresses, whilst written in hex, don't contain a 0x prefix.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Another mishandled merge conflict by me, where the header file renames
and the removal of gpio includes clashed and I chose the wrong end result.

Fixes build breakage for tegra_defconfig.

Signed-off-by: Olof Johansson <olof@lixom.net>

I mismerged one of the branches that moves around gpio header file usage,
and messed up for IOP. This fixes the obvious compilation failures caused
by it.

Signed-off-by: Olof Johansson <olof@lixom.net>

Pull ARM updates from Russell King:
 "This is the first chunk of ARM updates for this merge window.
  Conflicts are expected in two files - asm/timex.h and
  mach-integrator/integrator_cp.c.  Nothing particularly stands out more
  than anything else.

  Most of the growth is down to the opcodes stuff from Dave Martin,
  which is countered by Rob's patches to use more of the asm-generic
  headers on ARM."

(A few more conflicts grew since then, but it all looked fairly trivial)

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (44 commits)
  ARM: 7548/1: include linux/sched.h in syscall.h
  ARM: 7541/1: Add ARM ERRATA 775420 workaround
  ARM: ensure vm_struct has its phys_addr member filled in
  ARM: 7540/1: kexec: Check segment memory addresses
  ARM: 7539/1: kexec: scan for dtb magic in segments
  ARM: 7538/1: delay: add registration mechanism for delay timer sources
  ARM: 7536/1: smp: Formalize an IPI for wakeup
  ARM: 7525/1: ptrace: use updated syscall number for syscall auditing
  ARM: 7524/1: support syscall tracing
  ARM: 7519/1: integrator: convert platform devices to Device Tree
  ARM: 7518/1: integrator: convert AMBA devices to device tree
  ARM: 7517/1: integrator: initial device tree support
  ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ
  ARM: 7515/1: integrator: check PL010 base address from resource
  ARM: 7514/1: integrator: call common init function from machine
  ARM: 7522/1: arch_timers: register a time/cycle counter
  ARM: 7523/1: arch_timers: enable the use of the virtual timer
  ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental
  ARM: 7520/1: Build dtb files in all target
  ARM: Fix build warning in arch/arm/mm/alignment.c
  ...

Pull microblaze arch updates from Michal Simek.

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  Revert "microblaze_mmu_v2: Update signal returning address"
  microblaze: Added more support for PCI
  microblaze: Prefer to use pr_XXX instead of printk(KERN_XX)
  microblaze: Fix bug with passing command line
  microblaze: Remove PAGE properties duplication
  microblaze: Remove additional andi which has been already done
  microblaze: Use predefined macro for ESR_DIZ
  microblaze: Support 4k/16k/64k pages
  microblaze: Do not used hardcoded value in exception handler
  microblaze: Added fdt chosen capability for timer
  microblaze: Add support for ioreadXX/iowriteXX_rep
  microblaze: Improve failure handling for GPIO reset
  microblaze: clinkage.h

Pull IMA bugfix (security subsystem) from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ima: fix bug in argument order

Pull m68knommu arch updates from Greg Ungerer:
 "Most of it is a cleanup of the ColdFire hardware header files.  We
  have had a few occurrances of bugs caused by inconsistent definitions
  of peripheral addresses.  These patches make them all consistent, and
  also clean out a bunch of old crap.  Overall we remove about 1000
  lines."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (27 commits)
  m68knommu: fix inconsistent formating in ColdFire 5407 definitions
  m68knommu: fix inconsistent formating in ColdFire 5307 definitions
  m68knommu: fix inconsistent formating in ColdFire 527x definitions
  m68knommu: fix inconsistent formating in ColdFire 5272 definitions
  m68knommu: fix inconsistent formating in ColdFire 523x definitions
  m68knommu: clean up ColdFire 54xx General Timer definitions
  m68knommu: clean up Pin Assignment definitions for the 54xx ColdFire CPU
  m68knommu: fix multi-function pin setup for FEC module on ColdFire 523x
  m68knommu: move ColdFire slice timer address defiens to 54xx header
  m68knommu: use read/write IO access functions in ColdFire m532x setup code
  m68knommu: modify ColdFire 532x GPIO register definitions to be consistent
  m68knommu: remove a lot of unsed definitions for 532x ColdFire
  m68knommu: use definitions for the ColdFire 528x FEC multi-function pins
  m68knommu: remove address offsets relative to IPSBAR for ColdFire 527x
  m68knommu: remove unused ColdFire 5282 register definitions
  m68knommu: fix wrong register offsets used for ColdFire 5272 multi-function pins
  m68knommu: make ColdFire 5249 MBAR2 register definitions absolute addresses
  m68knommu: make remaining ColdFire 5272 register definitions absolute addresses
  m68knommu: make ColdFire Park and Assignment register definitions absolute addresses
  m68knommu: make ColdFire Chip Select register definitions absolute addresses
  ...

Pull virtio changes from Rusty Russell:
 "New workflow: same git trees pulled by linux-next get sent straight to
  Linus.  Git is awkward at shuffling patches compared with quilt or mq,
  but that doesn't happen often once things get into my -next branch."

* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
  lguest: fix occasional crash in example launcher.
  virtio-blk: Disable callback in virtblk_done()
  virtio_mmio: Don't attempt to create empty virtqueues
  virtio_mmio: fix off by one error allocating queue
  drivers/virtio/virtio_pci.c: fix error return code
  virtio: don't crash when device is buggy
  virtio: remove CONFIG_VIRTIO_RING
  virtio: add help to CONFIG_VIRTIO option.
  virtio: support reserved vqs
  virtio: introduce an API to set affinity for a virtqueue
  virtio-ring: move queue_index to vring_virtqueue
  virtio_balloon: not EXPERIMENTAL any more.
  virtio-balloon: dependency fix
  virtio-blk: fix NULL checking in virtblk_alloc_req()
  virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
  virtio-blk: Add bio-based IO path for virtio-blk
  virtio: console: fix error handling in init() function
  tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
  tools: Add guest trace agent as a user tool
  virtio/console: Allocate scatterlist according to the current pipe size
  ...

Pull late ARM soc platform updates from Olof Johansson:
 "This branch contains updates to OMAP and Marvell platforms (kirkwood,
  dove, mvebu) that came in after we had done the big multiplatform
  merges, so they were kept separate from the rest, and not separated
  into the traditional topics of cleanup/driver/platform features.

  For OMAP, the updates are:
   - Runtime PM conversions for the GPMC and RNG IP blocks
   - Preparation patches for the OMAP common clock framework conversion
   - clkdev alias additions required by other drivers
   - Performance Monitoring Unit (PMU) support for OMAP2, 3, and
     non-4430 OMAP4
   - OMAP hwmod code and data improvements
   - Preparation patches for the IOMMU runtime PM conversion
   - Preparation patches for OMAP4 full-chip retention support

  For Kirkwood/Dove/mvebu:
   - New driver for "address decoder controller" for mvebu, which is a
     piece of hardware that configures addressable devices and
     peripherals.  First user is the boot rom aperture on armada XP
     since it is needed for SMP support.
   - New device tree bindings for peripherals such as gpio-fan, iconnect
     nand, mv_cesa and the above address decoder controller.
   - Some defconfig updates, mostly to enable new DT boards and a few
     drivers.
   - New drivers using the pincontrol subsystem for dove, kirkwood and
     mvebu
   - New clean gpio driver for mvebu"

* tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits)
  ARM: mvebu: fix build breaks from multi-platform conversion
  ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70
  ARM: OMAP2+: PMU: Add runtime PM support
  ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD
  ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD
  ARM: OMAP3: hwmod data: Add debugss HWMOD data
  ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems
  ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP
  hwrng: OMAP: remove SoC restrictions from driver registration
  ARM: OMAP: split OMAP1, OMAP2+ RNG device registration
  hwrng: OMAP: convert to use runtime PM
  hwrng: OMAP: store per-device data in per-device variables, not file statics
  ARM: OMAP2xxx: hwmod/CM: add RNG integration data
  ARM: OMAP2+: gpmc: minimal driver support
  ARM: OMAP2+: gpmc: Adapt to HWMOD
  ARM: OMAP2/3: hwmod data: add gpmc
  ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  ARM: OMAP3: hwmod data: add mmu data for iva and isp
  ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected
  ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks
  ...

Pull ARM soc defconfig updates from Olof Johansson:
 "This might be the last time we do a standalone defconfig branch, since
  we now prefer to get them with the rest of the subarch updates
  instead.  These add a handful of useful options on various platforms,
  enable new boards and SoCs, etc."

* tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: defconfig updates
  ARM: LPC32xx: Defconfig update
  ARM: mach-shmobile: marzen: defconfig update
  ARM: mxs_defconfig: Add SPI and LRADC support
  ARM: s3c6400_defconfig: enable more boards in defconfig
  ARM: imx_v6_v7_defconfig: Remove CONFIG_DEFAULT_MMAP_MIN_ADDR
  ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support
  ARM: mxs_defconfig: Add framebuffer support
  ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support
  ARM: mxs_defconfig: Enable USB host

Pull media updates from Mauro Carvalho Chehab:
 "The first part of the media updates for Kernel 3.7.

  This series contain:

   - A major tree renaming patch series: now, drivers are organized
     internally by their used bus, instead of by V4L2 and/or DVB API,
     providing a cleaner driver location for hybrid drivers that
     implement both APIs, and allowing to cleanup the Kconfig items and
     make them more intuitive for the end user;

   - Media Kernel developers are typically very lazy with their duties
     of keeping the MAINTAINERS entries for their drivers updated.  As
     now the tree is more organized, we're doing an effort to add/update
     those entries for the drivers that aren't currently orphan;

   - Several DVB USB drivers got moved to a new DVB USB v2 core; the new
     core fixes several bugs (as the existing one that got bitroted).
     Now, suspend/resume finally started to work fine (at least with
     some devices - we should expect more work with regards to it);

   - added multistream support for DVB-T2, and unified the API for
     DVB-S2 and ISDB-S.  Backward binary support is preserved;

   - as usual, a few new drivers, some V4L2 core improvements and lots
     of drivers improvements and fixes.

  There are some points to notice on this series:

   1) you should expect a trivial merge conflict on your tree, with the
      removal of Documentation/feature-removal-schedule.txt: this series
      would be adding two additional entries there.  I opted to not
      rebase it due to this recent change;

   2) With regards to the PCTV 520e udev-related breakage, I opted to
      fix it in a way that the patches can be backported to 3.5 even
      without your firmware fix patch.  This way, Greg doesn't need to
      rush backporting your patch (as there are still the firmware cache
      and firmware path customization issues to be addressed there).

      I'll send later a patch (likely after the end of the merge window)
      reverting the rest of the DRX-K async firmware request, fully
      restoring its original behaviour to allow media drivers to
      initialize everything serialized as before for 3.7 and upper.

   3) I'm planning to work on this weekend to test the DMABUF patches
      for V4L2.  The patches are on my queue for several Kernel cycles,
      but, up to now, there is/was no way to test the series locally.

      I have some concerns about this particular changeset with regards
      to security issues, and with regards to the replacement of the old
      VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to
      GPU drivers change.  The Overlay API allows direct PCI2PCI
      transfers from a media capture card into the GPU framebuffer, but
      its API is crappy.  Also, the only existing X11 driver that
      implements it requires a XV extension that is not available
      anymore on modern drivers.  The DMABUF can do the same thing, but
      with it is promising to be a properly-designed API.  If I can
      successfully test this series and be happy with it, I should be
      asking you to pull them next week."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits)
  em28xx: regression fix: use DRX-K sync firmware requests on em28xx
  drxk: allow loading firmware synchrousnously
  em28xx: Make all em28xx extensions to be initialized asynchronously
  [media] tda18271: properly report read errors in tda18271_get_id
  [media] tda18271: delay IR & RF calibration until init() if delay_cal is set
  [media] MAINTAINERS: add Michael Krufky as tda827x maintainer
  [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer
  [media] MAINTAINERS: add Michael Krufky as cxusb maintainer
  [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer
  [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer
  [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer
  [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap
  [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend()
  [media] exynos-gsc: Add missing static storage class specifiers
  [media] exynos-gsc: Remove <linux/version.h> header file inclusion
  [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs()
  [media] s5p-tv: Fix potential NULL pointer dereference error
  [media] s5k6aa: Fix possible NULL pointer dereference
  ...

bd31b859

 "locking, ARM: Annotate low level hw locks as raw"
made nw_gpio_lock a raw spinlock, but did not change all the
users in device drivers. This fixes the remaining ones.

sound/oss/waveartist.c: In function 'vnc_mute_spkr':
sound/oss/waveartist.c:1485:2: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type [enabled by default]
include/linux/spinlock.h:272:102: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *'
drivers/char/ds1620.c: In function 'netwinder_lock':
drivers/char/ds1620.c:77:2: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type [enabled by default]
include/linux/spinlock.h:272:102: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *'
drivers/char/nwflash.c: In function 'kick_open':
drivers/char/nwflash.c:620:2: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type [enabled by default]
include/linux/spinlock.h:272:102: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>

The annotation on the addr_map_cfg variable is in the wrong place.

Without this patch, building mv78xx0_defconfig results in:

/home/arnd/linux-arm/arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: initialization from incompatible pointer type [enabled by default]
/home/arnd/linux-arm/arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: (near initialization for 'addr_map_cfg.win_cfg_base') [enabled by default]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <jason@lakedaemon.net>

Since commit bd8abc9a

 "ARM: mc146818rtc: remove unnecessary include of
mach/irqs.h", building footbridge_defconfig results in this warning:

In file included from include/linux/mc146818rtc.h:16:0,
                 from arch/arm/mach-footbridge/isa-rtc.c:21:
arch/arm/include/asm/mc146818rtc.h:10:0: warning: "RTC_IRQ" redefined [enabled by default]
arch/arm/mach-footbridge/include/mach/irqs.h:93:0: note: this is the location of the previous definition

The above commit was intentionally made to catch errors like this,
where code relies on the RTC_IRQ definition. The only driver using
it is the legacy PC-style drivers/char/rtc.c driver.
However, the ARM architecture has been using the RTC_LIB framework
since at least 2006, and that doesn't use it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
Cc: Russell King <linux@arm.linux.org.uk>

The PL310_ERRATA_753970 and ARM_ERRATA_764369 symbols only make sense
when the base features for them are enabled, so select them
conditionally in Kconfig to avoid warnings like:

warning: (UX500_SOC_COMMON) selects PL310_ERRATA_753970 which has unmet direct dependencies (CACHE_PL310)
warning: (ARCH_TEGRA_2x_SOC && ARCH_TEGRA_3x_SOC && UX500_SOC_COMMON) selects ARM_ERRATA_764369 which has unmet direct dependencies (CPU_V7 && SMP)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Warren <swarren@nvidia.com>

__arch_virt_to_dma expects a virtual address pointer, but
the ks8695 implementation of this macro treats it as an
integer. Adding a type cast avoids hundreds of identical
warning messages.

Without this patch, building acs5k_defconfig results in:

arch/arm/include/asm/dma-mapping.h: In function 'virt_to_dma':
arch/arm/include/asm/dma-mapping.h:60:2: warning: passing argument 1 of '__virt_to_phys' makes integer from pointer without a cast [enabled by default]
arch/arm/include/asm/memory.h:172:60: note: expected 'long unsigned int' but argument is of type 'void *'
In file included from include/linux/dma-mapping.h:73:0,
                 from include/linux/skbuff.h:33,
                 from security/commoncap.c:21:

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Daniel Silverstone <dsilvers@simtec.co.uk>
Cc: Ben Dooks <ben-linux@fluff.org>

device_register is marked __must_check, so we better propagate the error
value by returning it from ecard_probe.

Without this patch, building rpc_defconfig results in:

arch/arm/mach-rpc/ecard.c: In function 'ecard_probe':
arch/arm/mach-rpc/ecard.c:963:17: warning: ignoring return value of 'device_register', declared with attribute warn_unused_result [-Wunused-result]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>

The mityomapl138_cpufreq_init and read_factory_config function in
board-mityomapl138.c are not __init functions and might be called
at a later stage, so da850_register_cpufreq must not be __init either.

Without this patch, building da8xx_omapl_defconfig results in:

WARNING: arch/arm/mach-davinci/built-in.o(.text+0x2eb4): Section mismatch in reference from the function read_factory_config() to the function .init.text:da850_register_cpufreq()
The function read_factory_config() references
the function __init da850_register_cpufreq().
This is often because read_factory_config lacks a __init
annotation or the annotation of da850_register_cpufreq is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>

The pci map_irq callbacks get a 'const' pci_dev argument, so change the
iop13xx version to use the same prototype as everything else.

Without this patch, building iop13xx_defconfig results in:

arch/arm/mach-iop13xx/iq81340sc.c:63:2: warning: initialization from incompatible pointer type [enabled by default]
arch/arm/mach-iop13xx/iq81340sc.c:63:2: warning: (near initialization for 'iq81340sc_pci.map_irq') [enabled by default]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <djbw@fb.com>

pci_scan_root_bus is __devinit, so iop13xx_scan_bus has to be the
same in order to safely call it. This is ok because the function
itself is only called from the hwpci->scan callback.

WARNING: vmlinux.o(.text+0x10138): Section mismatch in reference from the function iop13xx_scan_bus() to the function .devinit.text:pci_scan_root_bus()
The function iop13xx_scan_bus() references
the function __devinit pci_scan_root_bus().
This is often because iop13xx_scan_bus lacks a __devinit
annotation or the annotation of pci_scan_root_bus is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Dan Williams <djbw@fb.com>

The sys_timer init function is only called at __init time,
so it's safe to mark mv78xx0_timer_init as __init_refok,
which allows us to call orion_time_init without getting
a link time warning.

Without this patch, building mv78xx0_defconfig results in:

WARNING: vmlinux.o(.text+0x15470): Section mismatch in reference from the function mv78xx0_timer_init() to the function .init.text:orion_time_init()
The function mv78xx0_timer_init() references
the function __init orion_time_init().
This is often because mv78xx0_timer_init lacks a __init
annotation or the annotation of orion_time_init is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>

The *_irq_add function should not be marked __init because the driver
subsystem thinks they might be called at a later stage.

The usb_simtec_init function accesses initdata and should be marked
init. This is safe because the only caller is also an init function.

Without this patch, building s3c2410_defconfig results in:

WARNING: arch/arm/mach-s3c24xx/built-in.o(.data+0x1030): Section mismatch in reference from the variable s3c2416_irq_interface to the function .init.text:s3c2416_irq_add()
The variable s3c2416_irq_interface references
the function __init s3c2416_irq_add()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: arch/arm/mach-s3c24xx/built-in.o(.data+0x1b08): Section mismatch in reference from the variable s3c2443_irq_interface to the function .init.text:s3c2443_irq_add()
The variable s3c2443_irq_interface references
the function __init s3c2443_irq_add()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: arch/arm/mach-s3c24xx/built-in.o(.data+0xf44): Section mismatch in reference from the variable s3c2416_irq_interface to the function .init.text:s3c2416_irq_add()
The variable s3c2416_irq_interface references
the function __init s3c2416_irq_add()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: arch/arm/mach-s3c24xx/built-in.o(.text+0x3f7c): Section mismatch in reference from the function usb_simtec_init() to the (unknown reference) .init.data:(unknown)
The function usb_simtec_init() references
the (unknown reference) __initdata (unknown).
This is often because usb_simtec_init lacks a __initdata
annotation or the annotation of (unknown) is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>

Pull pstore changes from Anton Vorontsov:

 1) We no longer ad-hoc to the function tracer "high level"
    infrastructure and no longer use its debugfs knobs.  The change
    slightly touches kernel/trace directory, but it got the needed ack
    from Steven Rostedt:

      http://lkml.org/lkml/2012/8/21/688

 2) Added maintainers entry;

 3) A bunch of fixes, nothing special.

* tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore:
  pstore: Avoid recursive spinlocks in the oops_in_progress case
  pstore/ftrace: Convert to its own enable/disable debugfs knob
  pstore/ram: Add missing platform_device_unregister
  MAINTAINERS: Add pstore maintainers
  pstore/ram: Mark ramoops_pstore_write_buf() as notrace
  pstore/ram: Fix printk format warning
  pstore/ram: Fix possible NULL dereference

Pull battery updates from Anton Vorontsov:
 "1. New drivers:
     - Marvell 88pm860x charger and battery drivers;
     - Texas Instruments LP8788 charger driver;
  2. Two new power supply properties: whether a battery is authentic,
     and chargers' maximal currents and voltages;
  3. A lot of TI LP8727 Charger cleanups;
  4. New features for Charger Manager, mainly now we can disable
     specific regulators;
  5. Random fixes and cleanups for other drivers."

Fix up trivial conflicts in <linux/mfd/88pm860x.h>

* tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits)
  pda_power: Remove ac_draw_failed goto and label
  charger-manager: Add support sysfs entry for charger
  charger-manager: Support limit of maximum possible
  charger-manager: Check fully charged state of battery periodically
  lp8727_charger: More pure cosmetic improvements
  lp8727_charger: Fix checkpatch warning
  lp8727_charger: Add description in the private data
  lp8727_charger: Fix a typo - chg_parm to chg_param
  lp8727_charger: Make some cosmetic changes in lp8727_delayed_func()
  lp8727_charger: Clean up lp8727_charger_changed()
  lp8727_charger: Return if the battery is discharging
  lp8727_charger: Make lp8727_charger_get_propery() simpler
  lp8727_charger: Make lp8727_ctrl_switch() inline
  lp8727_charger: Make lp8727_init_device() shorter
  lp8727_charger: Clean up lp8727_is_charger_attached()
  lp8727_charger: Use specific definition
  lp8727_charger: Clean up lp8727 definitions
  lp8727_charger: Use the definition rather than enum
  lp8727_charger: Fix code for getting battery temp
  lp8727_charger: Clear interrrupts at inital time
  ...

Pull infiniband changes from Roland Dreier:
  "Second batch of changes for the 3.7 merge window:
   - Late-breaking fix for IPoIB on mlx4 SR-IOV VFs.
   - Fix for IPoIB build breakage with CONFIG_INFINIBAND_IPOIB_CM=n (new
     netlink config changes are to blame).
   - Make sure retry count values are in range in RDMA CM.
   - A few nes hardware driver fixes and cleanups.
   - Have iSER initiator use >1 interrupt vectors if available."

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cma: Check that retry count values are in range
  IB/iser: Add more RX CQs to scale out processing of SCSI responses
  RDMA/nes: Bump the version number of nes driver
  RDMA/nes: Remove unused module parameter "send_first"
  RDMA/nes: Remove unnecessary if-else statement
  RDMA/nes: Add missing break to switch.
  mlx4_core: Adjust flow steering attach wrapper so that IB works on SR-IOV VFs
  IPoIB: Fix build with CONFIG_INFINIBAND_IPOIB_CM=n

Pull UAPI disintegration fixes from David Howells:
 "There are three main parts:

 (1) I found I needed some more fixups in the wake of testing Arm64
     (some asm/unistd.h files had weird guards that caused problems -
     mostly in arches for which I don't have a compiler) and some
     __KERNEL__ splitting needed to take place in Arm64.

 (2) I found that c6x was missing some __KERNEL__ guards in its
     asm/signal.h.  Mark Salter pointed me at a tree with a patch to
     remove that file entirely and use the asm-generic variant instead.

 (3) Lastly, m68k turned out to have a header installation problem due
     to it lacking a kvm_para.h file.

     The conditional installation bits for linux/kvm_para.h, linux/kvm.h
     and linux/a.out.h weren't very well specified - and didn't work if
     an arch didn't have the asm/ version of that file, but there *was*
     an asm-generic/ version.

     It seems the "ifneq $((wildcard ...),)" for each of those three
     headers in include/kernel/Kbuild is invoked twice during header
     installation, and the second time it matches on the just installed
     asm-generic/kvm_para.h file and thus incorrectly installs
     linux/kvm_para.h as well.

     Most arches actually have an asm/kvm_para.h, so this wasn't
     detectable in those."

* 'uapi-prep' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files
  c6x: make dsk6455 the default config

Pull SLAB changes from Pekka Enberg:
 "New and noteworthy:

  * More SLAB allocator unification patches from Christoph Lameter and
    others.  This paves the way for slab memcg patches that hopefully
    will land in v3.8.

  * SLAB tracing improvements from Ezequiel Garcia.

  * Kernel tainting upon SLAB corruption from Dave Jones.

  * Miscellanous SLAB allocator bug fixes and improvements from various
    people."

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (43 commits)
  slab: Fix build failure in __kmem_cache_create()
  slub: init_kmem_cache_cpus() and put_cpu_partial() can be static
  mm/slab: Fix kmem_cache_alloc_node_trace() declaration
  Revert "mm/slab: Fix kmem_cache_alloc_node_trace() declaration"
  mm, slob: fix build breakage in __kmalloc_node_track_caller
  mm/slab: Fix kmem_cache_alloc_node_trace() declaration
  mm/slab: Fix typo _RET_IP -> _RET_IP_
  mm, slub: Rename slab_alloc() -> slab_alloc_node() to match SLAB
  mm, slab: Rename __cache_alloc() -> slab_alloc()
  mm, slab: Match SLAB and SLUB kmem_cache_alloc_xxx_trace() prototype
  mm, slab: Replace 'caller' type, void* -> unsigned long
  mm, slob: Add support for kmalloc_track_caller()
  mm, slab: Remove silly function slab_buffer_size()
  mm, slob: Use NUMA_NO_NODE instead of -1
  mm, sl[au]b: Taint kernel when we detect a corrupted slab
  slab: Only define slab_error for DEBUG
  slab: fix the DEADLOCK issue on l3 alien lock
  slub: Zero initial memory segment for kmem_cache and kmem_cache_node
  Revert "mm/sl[aou]b: Move sysfs_slab_add to common"
  mm/sl[aou]b: Move kmem_cache refcounting to common code
  ...

Merge tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull ADM Xen support from Konrad Rzeszutek Wilk:

  Features:
   * Allow a Linux guest to boot as initial domain and as normal guests
     on Xen on ARM (specifically ARMv7 with virtualized extensions).  PV
     console, block and network frontend/backends are working.
  Bug-fixes:
   * Fix compile linux-next fallout.
   * Fix PVHVM bootup crashing.

  The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports
  ARMv7 platforms.

  The goal in implementing this architecture is to exploit the hardware
  as much as possible.  That means use as little as possible of PV
  operations (so no PV MMU) - and use existing PV drivers for I/Os
  (network, block, console, etc).  This is similar to how PVHVM guests
  operate in X86 platform nowadays - except that on ARM there is no need
  for QEMU.  The end result is that we share a lot of the generic Xen
  drivers and infrastructure.

  Details on how to compile/boot/etc are available at this Wiki:

    http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions

  and this blog has links to a technical discussion/presentations on the
  overall architecture:

    http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/

* tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits)
  xen/xen_initial_domain: check that xen_start_info is initialized
  xen: mark xen_init_IRQ __init
  xen/Makefile: fix dom-y build
  arm: introduce a DTS for Xen unprivileged virtual machines
  MAINTAINERS: add myself as Xen ARM maintainer
  xen/arm: compile netback
  xen/arm: compile blkfront and blkback
  xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree
  xen/arm: receive Xen events on ARM
  xen/arm: initialize grant_table on ARM
  xen/arm: get privilege status
  xen/arm: introduce CONFIG_XEN on ARM
  xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM
  xen/arm: Introduce xen_ulong_t for unsigned long
  xen/arm: Xen detection and shared_info page mapping
  docs: Xen ARM DT bindings
  xen/arm: empty implementation of grant_table arch specific functions
  xen/arm: sync_bitops
  xen/arm: page.h definitions
  xen/arm: hypercalls
  ...

Pull powerpc updates from Benjamin Herrenschmidt:
 "Some highlights in addition to the usual batch of fixes:

   - 64TB address space support for 64-bit processes by Aneesh Kumar

   - Gavin Shan did a major cleanup & re-organization of our EEH support
     code (IBM fancy PCI error handling & recovery infrastructure) which
     paves the way for supporting different platform backends, along
     with some rework of the PCIe code for the PowerNV platform in order
     to remove home made resource allocations and instead use the
     generic code (which is possible after some small improvements to it
     done by Gavin).

   - Uprobes support by Ananth N Mavinakayanahalli

   - A pile of embedded updates from Freescale folks, including new SoC
     and board supports, more KVM stuff including preparing for 64-bit
     BookE KVM support, ePAPR 1.1 updates, etc..."

Fixup trivial conflicts in drivers/scsi/ipr.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc/iommu: Fix multiple issues with IOMMU pools code
  powerpc: Fix VMX fix for memcpy case
  driver/mtd:IFC NAND:Initialise internal SRAM before any write
  powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
  powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
  powerpc: Remove tlb batching hack for nighthawk
  powerpc: Set paca->data_offset = 0 for boot cpu
  powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
  powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
  powerpc/mpc85xx: Update interrupt handling for IFC controller
  powerpc/85xx: Enable USB support in p1023rds_defconfig
  powerpc/smp: Do not disable IPI interrupts during suspend
  powerpc/eeh: Fix crash on converting OF node to edev
  powerpc/eeh: Lock module while handling EEH event
  powerpc/kprobe: Don't emulate store when kprobe stwu r1
  powerpc/kprobe: Complete kprobe and migrate exception frame
  powerpc/kprobe: Introduce a new thread flag
  powerpc: Remove unused __get_user64() and __put_user64()
  powerpc/eeh: Global mutex to protect PE tree
  powerpc/eeh: Remove EEH PE for normal PCI hotplug
  ...

Pull networking changes from David Miller:
 "The most important bit in here is the fix for input route caching from
  Eric Dumazet, it's a shame we couldn't fully analyze this in time for
  3.6 as it's a 3.6 regression introduced by the routing cache removal.

  Anyways, will send quickly to -stable after you pull this in.

  Other changes of note:

   1) Fix lockdep splats in team and bonding, from Eric Dumazet.

   2) IPV6 adds link local route even when there is no link local
      address, from Nicolas Dichtel.

   3) Fix ixgbe PTP implementation, from Jacob Keller.

   4) Fix excessive stack usage in cxgb4 driver, from Vipul Pandya.

   5) MAC length computed improperly in VLAN demux, from Antonio
      Quartulli."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt
  Remove noisy printks from llcp_sock_connect
  tipc: prevent dropped connections due to rcvbuf overflow
  silence some noisy printks in irda
  team: set qdisc_tx_busylock to avoid LOCKDEP splat
  bonding: set qdisc_tx_busylock to avoid LOCKDEP splat
  sctp: check src addr when processing SACK to update transport state
  sctp: fix a typo in prototype of __sctp_rcv_lookup()
  ipv4: add a fib_type to fib_info
  can: mpc5xxx_can: fix section type conflict
  can: peak_pcmcia: fix error return code
  can: peak_pci: fix error return code
  cxgb4: Fix build error due to missing linux/vmalloc.h include.
  bnx2x: fix ring size for 10G functions
  cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params()
  ixgbe: add support for X540-AT1
  ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bit
  ixgbe: fix PTP ethtool timestamping function
  ixgbe: (PTP) Fix PPS interrupt code
  ixgbe: Fix PTP X540 SDP alignment code for PPS signal
  ...

Merge misc patches from Andrew Morton:
 "The MM tree is rather stuck while I wait to find out what the heck is
  happening with sched/numa.  Probably I'll need to route around all the
  code which was added to -next, sigh.

  So this is "everything else", or at least most of it - other small
  bits are still awaiting resolutions of various kinds."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits)
  lib/decompress.c add __init to decompress_method and data
  kernel/resource.c: fix stack overflow in __reserve_region_with_split()
  omfs: convert to use beXX_add_cpu()
  taskstats: cgroupstats_user_cmd() may leak on error
  aoe: update aoe-internal version number to 50
  aoe: update documentation to better reflect aoe-plus-udev usage
  aoe: remove unused code
  aoe: make dynamic block minor numbers the default
  aoe: update and specify AoE address guards and error messages
  aoe: retain static block device numbers for backwards compatibility
  aoe: support more AoE addresses with dynamic block device minor numbers
  aoe: update documentation with new URL and VM settings reference
  aoe: update copyright year in touched files
  aoe: update internal version number to 49
  aoe: remove unused code and add cosmetic improvements
  aoe: increase net_device reference count while using it
  aoe: associate frames with the AoE storage target
  aoe: disallow unsupported AoE minor addresses
  aoe: do revalidation steps in order
  aoe: failover remote interface based on aoe_deadsecs parameter
  ...

Fix the warning:

  WARNING: vmlinux.o(.text+0x14cfd8): Section mismatch in reference from the variable compressed_formats to the function .init.text:gunzip()
  The function compressed_formats() references
  the function __init gunzip().
  etc..

Within decompress.c, compressed_formats[] needs 'a __initdata annotation',
because some of it's data members refer to functions which will be
unloaded after init.

Consequently, its user decompress_method() will get the __init prefix.

Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es>
Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Using a recursive call add a non-conflicting region in
__reserve_region_with_split() could result in a stack overflow in the case
that the recursive calls are too deep.  Convert the recursive calls to an
iterative loop to avoid the problem.

Tested on a machine containing 135 regions.  The kernel no longer panicked
with stack overflow.

Also tested with code arbitrarily adding regions with no conflict,
embedding two consecutive conflicts and embedding two non-consecutive
conflicts.

Signed-off-by: T Makphaibulchoke <tmac@hp.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@gmail.com>
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>