- Nov 19, 2019
-
-
Masami Hiramatsu authoredSupport DW_AT_const_value for variable assignment instead of location. Note that this requires ftrace supporting immediate value. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476012.24476.16096289871757175775.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Masami Hiramatsu authored
Support multiprobe event if the event is based on function and lines and kernel supports it. In this case, perf probe creates the first probe with an event, and tries to append following probes on that event, since those probes must be on the same source code line. Before this patch; # perf probe -a vfs_read:18 Added new events: probe:vfs_read_L18 (on vfs_read:18) probe:vfs_read_L18_1 (on vfs_read:18) You can now use it in all perf tools, such as: perf record -e probe:vfs_read_L18_1 -aR sleep 1 # After this patch (on multiprobe supported kernel) # perf probe -a vfs_read:18 Added new events: probe:vfs_read_L18 (on vfs_read:18) probe:vfs_read_L18 (on vfs_read:18) You can now use it in all perf tools, such as: perf record -e probe:vfs_read_L18 -aR sleep 1 # Committer testing: On a kernel that doesn't support multiprobe events, after this patch: # uname -a Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux # grep append /sys/kernel/debug/tracing/README be modified by appending '.descending' or '.ascending' to a can be modified by appending any of the following modifiers # # perf probe -a vfs_read:18 Added new events: probe:vfs_read_L18 (on vfs_read:18) probe:vfs_read_L18_1 (on vfs_read:18) You can now use it in all perf tools, such as: perf record -e probe:vfs_read_L18_1 -aR sleep 1 # perf probe -l probe:vfs_read_L18 (on vfs_read:18@fs/read_write.c) probe:vfs_read_L18_1 (on vfs_read:18@fs/read_write.c) # Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406475010.24476.586290752591512351.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Masami Hiramatsu authored
Generate event name from function name with line number as <function>_L<line_number>. Note that this is only for the new event which is defined by the line number of function (except for line 0). If there is another event on same line, you have to use "-f" option. In that case, the new event has "_1" suffix. e.g. # perf probe -a kernel_read:2 Added new event: probe:kernel_read_L2 (on kernel_read:2) You can now use it in all perf tools, such as: perf record -e probe:kernel_read_L2 -aR sleep 1 But if we omit the line number or 0th line, it will have no suffix. # perf probe -a kernel_read:0 Added new event: probe:kernel_read (on kernel_read) You can now use it in all perf tools, such as: perf record -e probe:kernel_read -aR sleep 1 probe:kernel_read (on kernel_read@linux-5.0.0/fs/read_write.c) probe:kernel_read_L2 (on kernel_read:2@linux-5.0.0/fs/read_write.c) Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406474026.24476.2828897745502059569.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Masami Hiramatsu authored
Since perf probe -L shows non representive lines, it can be mislead users where user can put probes. This prevents to show such non representive lines so that user can understand which lines user can probe. # perf probe -L kernel_read <kernel_read@/build/linux-pvZVvI/linux-5.0.0/fs/read_write.c:0> 0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos) { 2 mm_segment_t old_fs; ssize_t result; old_fs = get_fs(); 6 set_fs(get_ds()); /* The cast to a user pointer is valid due to the set_fs() */ 8 result = vfs_read(file, (void __user *)buf, count, pos); 9 set_fs(old_fs); 10 return result; } EXPORT_SYMBOL(kernel_read); Committer testing: Before: # perf probe -L kernel_read <kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0> 0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos) 1 { 2 mm_segment_t old_fs; 3 ssize_t result; 5 old_fs = get_fs(); 6 set_fs(KERNEL_DS); /* The cast to a user pointer is valid due to the set_fs() */ 8 result = vfs_read(file, (void __user *)buf, count, pos); 9 set_fs(old_fs); 10 return result; } EXPORT_SYMBOL(kernel_read); # See the 1, 3, 5 lines? They shouldn't be there, after this patch: # perf probe -L kernel_read <kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0> 0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos) { 2 mm_segment_t old_fs; ssize_t result; old_fs = get_fs(); 6 set_fs(KERNEL_DS); /* The cast to a user pointer is valid due to the set_fs() */ 8 result = vfs_read(file, (void __user *)buf, count, pos); 9 set_fs(old_fs); 10 return result; } EXPORT_SYMBOL(kernel_read); # Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406473064.24476.2913278267727587314.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Masami Hiramatsu authored
Verify user given probe line is a representive line (which doesn't share the address with other lines or the line is the least line among the lines which shares same address), and if not, it shows what is the representive line. Without this fix, user can put a probe on the lines which is not a a representive line. But since this is not a representive line, perf probe -l shows a representive line number instead of user given line number. e.g. (put kernel_read:3, but listed as kernel_read:2) # perf probe -a kernel_read:3 Added new event: probe:kernel_read (on kernel_read:3) You can now use it in all perf tools, such as: perf record -e probe:kernel_read -aR sleep 1 # perf probe -l probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c) With this fix, perf probe doesn't allow user to put a probe on a representive line, and tell what is the representive line. # perf probe -a kernel_read:3 This line is sharing the addrees with other lines. Please try to probe at kernel_read:2 instead. Error: Failed to add events. Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406472071.24476.14915451439785001021.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Masami Hiramatsu authored
The dwarf_getsrc_die() can return the line which is not a statement nor the least line number among the lines which shares same address. This can lead perf probe --list shows incorrect line number for probed address. To fix this, this introduces cu_getsrc_die() which returns only a statement line and which is the least line number (we call it the representive line for an address), and use it in cu_find_lineinfo(). Also, if the given address is the entry address of a real function, cu_find_lineinfo() returns the function declared line number instead of the start line number of the function body. For example, without this change perf probe -l shows incorrect line as below. # perf probe -a kernel_read:2 Added new event: probe:kernel_read (on kernel_read:2) You can now use it in all perf tools, such as: perf record -e probe:kernel_read -aR sleep 1 # perf probe -l probe:kernel_read (on kernel_read:1@linux-5.0.0/fs/read_write.c) With this fix, it shows correct line number as below; # perf probe -l probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c) Reported-by:Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406471067.24476.17463149618465494448.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Adrian Hunter authored
Add to the opcode map the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows: $ perf test -v "new " 2>&1 | grep -i cldemote Decoded ok: 0f 1c 00 cldemote (%eax) Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8) Decoded ok: 0f 1c 00 cldemote (%rax) Decoded ok: 41 0f 1c 00 cldemote (%r8) Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678 Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8) Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8) $ perf test -v "new " 2>&1 | grep -i tpause Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 0f ae f3 tpause %ebx Decoded ok: 66 41 0f ae f0 tpause %r8d $ perf test -v "new " 2>&1 | grep -i umonitor Decoded ok: 67 f3 0f ae f0 umonitor %ax Decoded ok: f3 0f ae f0 umonitor %eax Decoded ok: 67 f3 0f ae f0 umonitor %eax Decoded ok: f3 0f ae f0 umonitor %rax Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d $ perf test -v "new " 2>&1 | grep -i umwait Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 0f ae f0 umwait %eax Decoded ok: f2 41 0f ae f0 umwait %r8d $ perf test -v "new " 2>&1 | grep -i movdiri Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx) Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax) Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx) Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax) $ perf test -v "new " 2>&1 | grep -i movdir64b Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmd Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i enqcmds Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx $ perf test -v "new " 2>&1 | grep -i encls Decoded ok: 0f 01 cf encls Decoded ok: 0f 01 cf encls $ perf test -v "new " 2>&1 | grep -i enclu Decoded ok: 0f 01 d7 enclu Decoded ok: 0f 01 d7 enclu $ perf test -v "new " 2>&1 | grep -i enclv Decoded ok: 0f 01 c0 enclv Decoded ok: 0f 01 c0 enclv $ perf test -v "new " 2>&1 | grep -i pconfig Decoded ok: 0f 01 c5 pconfig Decoded ok: 0f 01 c5 pconfig $ perf test -v "new " 2>&1 | grep -i wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Decoded ok: f3 0f 09 wbnoinvd Signed-off-by:Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Adrian Hunter authored
Add to the "x86 instruction decoder - new instructions" test the following instructions: cldemote tpause umonitor umwait movdiri movdir64b enqcmd enqcmds encls enclu enclv pconfig wbnoinvd For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037). Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
So we start with: $ pahole -C map ~/bin/perf struct map { union { struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */ struct list_head node; /* 0 16 */ } __attribute__((__aligned__(8))); /* 0 24 */ u64 start; /* 24 8 */ u64 end; /* 32 8 */ _Bool erange_warned:1; /* 40: 0 1 */ _Bool priv:1; /* 40: 1 1 */ /* XXX 6 bits hole, try to pack */ /* XXX 3 bytes hole, try to pack */ u32 prot; /* 44 4 */ u32 flags; /* 48 4 */ /* XXX 4 bytes hole, try to pack */ u64 pgoff; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ u64 reloc; /* 64 8 */ u32 maj; /* 72 4 */ u32 min; /* 76 4 */ u64 ino; /* 80 8 */ u64 ino_generation; /* 88 8 */ u64 (*map_ip)(struct map *, u64); /* 96 8 */ u64 (*unmap_ip)(struct map *, u64); /* 104 8 */ struct dso * dso; /* 112 8 */ refcount_t refcnt; /* 120 4 */ /* size: 128, cachelines: 2, members: 17 */ /* sum members: 116, holes: 2, sum holes: 7 */ /* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */ /* padding: 4 */ /* forced alignments: 1 */ } __attribute__((__aligned__(8))); $ and 'flags' is seldom used when printing details about the map or with the "cacheline" sort order, we can move them it to the second cacheline, that will allow combining it with 'refcnt', that is only four bytes: $ pahole -C map ~/bin/perf struct map { union { struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */ struct list_head node; /* 0 16 */ } __attribute__((__aligned__(8))); /* 0 24 */ u64 start; /* 24 8 */ u64 end; /* 32 8 */ _Bool erange_warned:1; /* 40: 0 1 */ _Bool priv:1; /* 40: 1 1 */ /* XXX 6 bits hole, try to pack */ /* XXX 3 bytes hole, try to pack */ u32 prot; /* 44 4 */ u64 pgoff; /* 48 8 */ u64 reloc; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ u32 maj; /* 64 4 */ u32 min; /* 68 4 */ u64 ino; /* 72 8 */ u64 ino_generation; /* 80 8 */ u64 (*map_ip)(struct map *, u64); /* 88 8 */ u64 (*unmap_ip)(struct map *, u64); /* 96 8 */ struct dso * dso; /* 104 8 */ refcount_t refcnt; /* 112 4 */ u32 flags; /* 116 4 */ /* size: 120, cachelines: 2, members: 17 */ /* sum members: 116, holes: 1, sum holes: 3 */ /* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */ /* forced alignments: 1 */ /* last cacheline: 56 bytes */ } __attribute__((__aligned__(8))); $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-2cdw3zlw1mkamaf7nqtdlxfi@git.kernel.org Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
The map->priv and map->erange_warned are seldom used, the first only in tests/vmlinux-kallsyms.c, the later only when hist_entry__inc_addr_samples() returns -ERANGE in 'perf top', which are really rare occasions, so make them a bool bitfield. This will open up space for other members on the first cacheline. $ pahole -C map ~/bin/perf struct map { union { struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */ struct list_head node; /* 0 16 */ } __attribute__((__aligned__(8))); /* 0 24 */ u64 start; /* 24 8 */ u64 end; /* 32 8 */ _Bool erange_warned:1; /* 40: 0 1 */ _Bool priv:1; /* 40: 1 1 */ /* XXX 6 bits hole, try to pack */ /* XXX 3 bytes hole, try to pack */ u32 prot; /* 44 4 */ u32 flags; /* 48 4 */ /* XXX 4 bytes hole, try to pack */ u64 pgoff; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ u64 reloc; /* 64 8 */ u32 maj; /* 72 4 */ u32 min; /* 76 4 */ u64 ino; /* 80 8 */ u64 ino_generation; /* 88 8 */ u64 (*map_ip)(struct map *, u64); /* 96 8 */ u64 (*unmap_ip)(struct map *, u64); /* 104 8 */ struct dso * dso; /* 112 8 */ refcount_t refcnt; /* 120 4 */ /* size: 128, cachelines: 2, members: 17 */ /* sum members: 116, holes: 2, sum holes: 7 */ /* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */ /* padding: 4 */ /* forced alignments: 1 */ } __attribute__((__aligned__(8))); $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-g5545pcq4ff0wr17tfb1piqt@git.kernel.org Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> -
Konstantin Khlebnikov authored
Add missing "%o" and "%X". Ext4 events use "%o" for printing i_mode. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lore.kernel.org/lkml/157338066113.6548.11461421296091086041.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Adrian Hunter authored
Do not dereference 'chain' when it is NULL. $ perf record -e intel_pt//u -e branch-misses:u uname $ perf report --itrace=l --branch-history perf: Segmentation fault Fixes: e9024d51 ("perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191114142538.4097-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
There are still lots of lookups by name, even if just when loading vmlinux, till that code is studied to figure out if its possible to do away with those map lookup by names, provide a way to sort it using libc's qsort/bsearch. Doing it at the first lookup defers the sorting a bit, and as the code stands now, is never done for user maps, just for the kernel ones. # perf probe -l # perf probe -x ~/bin/perf -L __map_groups__find_by_name <__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { struct map **mapp; 4 if (mg->maps_by_name == NULL && 5 map__groups__sort_by_name_from_rbtree(mg)) 6 return NULL; 8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name); 9 if (mapp) 10 return *mapp; 11 return NULL; 12 } struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) { # perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string' Added new event: probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:found -aR sleep 1 # # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } /* * If we have mg->maps_by_name, then the name isn't in the rbtree, * as mg->maps_by_name mirrors the rbtree when lookups by name are * made. */ 16 map = __map_groups__find_by_name(mg, name); 17 if (map || mg->maps_by_name != NULL) 18 goto out_unlock; /* Fallback to traversing the rbtree... */ 21 maps__for_each_entry(maps, map) 22 if (strcmp(map->dso->short_name, name) == 0) { 23 mg->last_search_by_name = map; 24 goto out_unlock; } 27 map = NULL; out_unlock: 30 up_read(&maps->lock); 31 return map; 32 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string' Added new events: probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string) You can now use it in all perf tools, such as: perf record -e probe_perf:fallback_1 -aR sleep 1 # # perf probe -l probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string) probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string) # # perf stat -e probe_perf:* Now run 'perf top' in another term and then, after a while, stop 'perf stat': Furthermore, if we ask for interval printing, we can see that that is done just at the start of the workload: # perf stat -I1000 -e probe_perf:* # time counts unit events 1.000319513 0 probe_perf:found 1.000319513 0 probe_perf:fallback_1 1.000319513 0 probe_perf:fallback 2.001868092 23,251 probe_perf:found 2.001868092 0 probe_perf:fallback_1 2.001868092 0 probe_perf:fallback 3.002901597 0 probe_perf:found 3.002901597 0 probe_perf:fallback_1 3.002901597 0 probe_perf:fallback 4.003358591 0 probe_perf:found 4.003358591 0 probe_perf:fallback_1 4.003358591 0 probe_perf:fallback ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
We'only populating maps for kernel modules either from perf.data file PERF_RECORD_MMAP records or when parsing /proc/modules, so there is no need to first look if we already have those module maps in the list, that would mean the kernel has duplicate entries. So ditch one use of looking up maps by name. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-gnzjg2hhuz6jnrw91m35059y@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
- Nov 18, 2019
-
-
Arnaldo Carvalho de Melo authored
At the end of a 'perf record' session, by default, we'll process all samples and populate the threads, maps, etc so as to find out which of the DSOs got samples, to reduce the size of the build-id table we'll add to the perf.data headers. But we don't need to process the PERF_RECORD_MMAP events synthesized for the kernel modules, as we have those already via perf_session__create_kernel_maps(), so add mmap/mmap2 handlers that first look at event->header.misc to see if the event is for a user map, bailing out if not. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-mofoxvcx2dryppcw3o689jdd@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
At some point in the past we needed to make sure we would get the long name of modules and not just what we get from /proc/modules, but that need, as described in the cset that introduced the adjustment function: Fixes: c03d5184 ("perf machine: Adjust dso->long_name for offline module") Without using the buildid-cache: # lsmod | grep trusted # insmod trusted.ko # lsmod | grep trusted trusted 24576 0 # strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 probe:key_seal (on key_seal in trusted) # perf probe -l probe:key_seal (on key_seal in trusted) # No attempt at opening '[trusted]'. Now using the build-id cache: # rmmod trusted # perf buildid-cache --add ./trusted.ko # insmod trusted.ko # strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/trusted.ko/dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3 # Again, no attempt at reading '[trusted]'. Finally, adding a probe to that function and then using: [root@quaco ~]# perf trace -e probe_perf:*/max-stack=16/ --max-events=2 0.000 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263) dso__adjust_kmod_long_name (/home/acme/bin/perf) machine__process_kernel_mmap_event (/home/acme/bin/perf) machine__process_mmap_event (/home/acme/bin/perf) perf_event__process_mmap (/home/acme/bin/perf) machines__deliver_event (/home/acme/bin/perf) perf_session__deliver_event (/home/acme/bin/perf) perf_session__process_event (/home/acme/bin/perf) process_simple (/home/acme/bin/perf) reader__process_events (/home/acme/bin/perf) __perf_session__process_events (/home/acme/bin/perf) perf_session__process_events (/home/acme/bin/perf) process_buildids (/home/acme/bin/perf) record__finish_output (/home/acme/bin/perf) __cmd_record (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) 0.055 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip: 5492263) dso__adjust_kmod_long_name (/home/acme/bin/perf) machine__process_kernel_mmap_event (/home/acme/bin/perf) machine__process_mmap_event (/home/acme/bin/perf) perf_event__process_mmap (/home/acme/bin/perf) machines__deliver_event (/home/acme/bin/perf) perf_session__deliver_event (/home/acme/bin/perf) perf_session__process_event (/home/acme/bin/perf) process_simple (/home/acme/bin/perf) reader__process_events (/home/acme/bin/perf) __perf_session__process_events (/home/acme/bin/perf) perf_session__process_events (/home/acme/bin/perf) process_buildids (/home/acme/bin/perf) record__finish_output (/home/acme/bin/perf) __cmd_record (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) # This was the only path I could find using the perf tools that reach at this function, then as of november/2019, if we put a probe in the line where the actuall setting of the dso->long_name is done: # perf trace -e probe_perf:* ^C[root@quaco ~] # perf stat -e probe_perf:* -I 2000 2.000404265 0 probe_perf:dso__adjust_kmod_long_name 4.001142200 0 probe_perf:dso__adjust_kmod_long_name 6.001704120 0 probe_perf:dso__adjust_kmod_long_name 8.002398316 0 probe_perf:dso__adjust_kmod_long_name 10.002984010 0 probe_perf:dso__adjust_kmod_long_name 12.003597851 0 probe_perf:dso__adjust_kmod_long_name 14.004113303 0 probe_perf:dso__adjust_kmod_long_name 16.004582773 0 probe_perf:dso__adjust_kmod_long_name 18.005176373 0 probe_perf:dso__adjust_kmod_long_name 20.005801605 0 probe_perf:dso__adjust_kmod_long_name 22.006467540 0 probe_perf:dso__adjust_kmod_long_name ^C 23.683261941 0 probe_perf:dso__adjust_kmod_long_name # Its not being used at all. To further test this I used kvm.ko as the offline module, i.e. removed if from the buildid-cache by nuking it completely (rm -rf ~/.debug) and moved it from the normal kernel distro path, removed the modules, stoped the kvm guest, and then installed it manually, etc. # rmmod kvm-intel # rmmod kvm # lsmod | grep kvm # modprobe kvm-intel modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: could not insert 'kvm_intel': Unknown symbol in module, or unknown parameter (see dmesg) # insmod ./kvm.ko # modprobe kvm-intel modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory # lsmod | grep kvm kvm_intel 299008 0 kvm 765952 1 kvm_intel irqbypass 16384 1 kvm # # perf probe -x ~/bin/perf machine__findnew_module_map:12 mname=m.name:string filename=filename:string 'dso_long_name=map->dso->long_name:string' 'dso_name=map->dso->name:string' # perf probe -l probe_perf:machine__findnew_module_map (on machine__findnew_module_map:12@util/machine.c in /home/acme/bin/perf with mname filename dso_long_name dso_name) # perf record ^C[ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 3.416 MB perf.data (33956 samples) ] # perf trace -e probe_perf:machine* <SNIP> 6.322 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[salsa20_generic]", filename: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_long_name: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_name: "[salsa20_generic]") 6.375 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip: 5492493, mname: "[kvm]", filename: "[kvm]", dso_long_name: "[kvm]", dso_name: "[kvm]") <SNIP> The filename doesn't come with the path, no point in trying to set the dso->long_name. [root@quaco ~]# strace -e open,openat perf probe -m ./kvm.ko kvm_apic_local_deliver |& egrep 'open.*kvm' openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/sys/module/kvm/notes/.note.gnu.build-id", O_RDONLY) = 4 openat(AT_FDCWD, "/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 7 openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 8 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/.debug/root/kvm.ko/5955f426cb93f03f30f3e876814be2db80ab0b55/probes", O_RDWR|O_CREAT, 0644) = 3 openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/.debug/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, ".debug/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory) openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 4 openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3 [root@quaco ~]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jlfew3lyb24d58egrp0o72o2@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
Lets see if it helps: First look at the probeable lines for the function that does lookups by name in a map_groups struct: # perf probe -x ~/bin/perf -L map_groups__find_by_name <map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0> 0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name) 1 { 2 struct maps *maps = &mg->maps; struct map *map; 5 down_read(&maps->lock); 7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) { 8 map = mg->last_search_by_name; 9 goto out_unlock; } 12 maps__for_each_entry(maps, map) 13 if (strcmp(map->dso->short_name, name) == 0) { 14 mg->last_search_by_name = map; 15 goto out_unlock; } 18 map = NULL; out_unlock: 21 up_read(&maps->lock); 22 return map; 23 } int dso__load_vmlinux(struct dso *dso, struct map *map, const char *vmlinux, bool vmlinux_allocated) # Now add a probe to the place where we reuse the last search: # perf probe -x ~/bin/perf map_groups__find_by_name:8 Added new event: probe_perf:map_groups__find_by_name (on map_groups__find_by_name:8 in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:map_groups__find_by_name -aR sleep 1 # Now lets do a system wide 'perf stat' counting those events: # perf stat -e probe_perf:* Leave it running and lets do a 'perf top', then, after a while, stop the 'perf stat': # perf stat -e probe_perf:* ^C Performance counter stats for 'system wide': 3,603 probe_perf:map_groups__find_by_name 44.565253139 seconds time elapsed # yeah, good to have. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-tcz37g3nxv3tvxw3q90vga3p@git.kernel.org Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
This is only used for the kernel maps, shave 24 bytes out 'struct map' and just traverse the existing per ip rbtree to look for maps by name, use a front end cache to reuse the last search if its the same name. After this 'struct map' is down to just two cachelines: $ pahole -C map ~/bin/perf struct map { union { struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */ struct list_head node; /* 0 16 */ } __attribute__((__aligned__(8))); /* 0 24 */ u64 start; /* 24 8 */ u64 end; /* 32 8 */ _Bool erange_warned; /* 40 1 */ /* XXX 3 bytes hole, try to pack */ u32 priv; /* 44 4 */ u32 prot; /* 48 4 */ u32 flags; /* 52 4 */ u64 pgoff; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ u64 reloc; /* 64 8 */ u32 maj; /* 72 4 */ u32 min; /* 76 4 */ u64 ino; /* 80 8 */ u64 ino_generation; /* 88 8 */ u64 (*map_ip)(struct map *, u64); /* 96 8 */ u64 (*unmap_ip)(struct map *, u64); /* 104 8 */ struct dso * dso; /* 112 8 */ refcount_t refcnt; /* 120 4 */ /* size: 128, cachelines: 2, members: 17 */ /* sum members: 121, holes: 1, sum holes: 3 */ /* padding: 4 */ /* forced alignments: 1 */ } __attribute__((__aligned__(8))); $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-bvr8fqfgzxtgnhnwt5sssx5g@git.kernel.org Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com>
-
- Nov 14, 2019
-
-
Arnaldo Carvalho de Melo authored
No need to iterate via the ->names rbtree, as all the entries there as in maps->entries as well, reuse __maps__purge() for that. Doing it this way we can kill maps__for_each_entry_by_name(), maps__for_each_entry_by_name_safe(), maps__{first,next}_by_name(). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ps0nrio8pydyo23rr2s696ue@git.kernel.org Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com>
-
- Nov 13, 2019
-
-
Adrian Hunter authored
Prior to version 3.23 SQLite does not support TRUE or FALSE, so always use 1 and 0 for SQLite. Fixes: 26c11206 ("perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.3+
Link: http://lore.kernel.org/lkml/20191113120206.26957-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
James Clark authored
No functional change. Remove extra commas in the power9 JSON files so that the files can be parsed and validated by other utilities such as Python that fail to parse invalid JSON. Before: $ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done tools/perf/pmu-events/arch/powerpc/power9/cache.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x300 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power9/floating-point.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x141 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power9/frontend.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x250 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power9/marked.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x301 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power9/memory.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x300 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power9/other.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x308 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power9/pipeline.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x4D0 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power9/pmc.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x200 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power9/translation.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x1E" (right here) ------^ JSON is invalid $ After: $ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done tools/perf/pmu-events/arch/powerpc/power9/cache.json JSON is valid tools/perf/pmu-events/arch/powerpc/power9/floating-point.json JSON is valid tools/perf/pmu-events/arch/powerpc/power9/frontend.json JSON is valid tools/perf/pmu-events/arch/powerpc/power9/marked.json JSON is valid tools/perf/pmu-events/arch/powerpc/power9/memory.json JSON is valid tools/perf/pmu-events/arch/powerpc/power9/other.json JSON is valid tools/perf/pmu-events/arch/powerpc/power9/pipeline.json JSON is valid tools/perf/pmu-events/arch/powerpc/power9/pmc.json JSON is valid tools/perf/pmu-events/arch/powerpc/power9/translation.json JSON is valid $ Signed-off-by:James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
James Clark authored
No functional change. Remove extra commas in the power8 JSON files so that the files can be parsed and validated by other utilities such as Python that fail to parse invalid JSON. Committer testing: Before: $ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done tools/perf/pmu-events/arch/powerpc/power8/cache.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x4c0 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power8/floating-point.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x200 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power8/frontend.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x250 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power8/marked.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x351 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power8/memory.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x100 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power8/other.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x1f0 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power8/pipeline.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x100 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power8/pmc.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x200 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/powerpc/power8/translation.json parse error: invalid object key (must be a string) [ {, "EventCode": "0x4c0 (right here) ------^ JSON is invalid $ After: $ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done tools/perf/pmu-events/arch/powerpc/power8/cache.json JSON is valid tools/perf/pmu-events/arch/powerpc/power8/floating-point.json JSON is valid tools/perf/pmu-events/arch/powerpc/power8/frontend.json JSON is valid tools/perf/pmu-events/arch/powerpc/power8/marked.json JSON is valid tools/perf/pmu-events/arch/powerpc/power8/memory.json JSON is valid tools/perf/pmu-events/arch/powerpc/power8/other.json JSON is valid tools/perf/pmu-events/arch/powerpc/power8/pipeline.json JSON is valid tools/perf/pmu-events/arch/powerpc/power8/pmc.json JSON is valid tools/perf/pmu-events/arch/powerpc/power8/translation.json JSON is valid $ Signed-off-by:James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
James Clark authored
No functional change. Add and remove extra commas in the arm64 JSON files so that the files can be parsed and validated by other utilities such as Python that fail to parse invalid JSON. Committer testing: Before: $ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json parse error: unallowed token at this point in JSON text [ { "PublicDescrip (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json parse error: unallowed token at this point in JSON text [ { "PublicDescrip (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json parse error: invalid object key (must be a string) [ { "ArchStdEvent": "BR (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json parse error: invalid object key (must be a string) [ { "ArchStdEvent": (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json parse error: invalid object key (must be a string) [ { "ArchStdEvent": (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/armv8-recommended.json parse error: after array element, I expect ',' or ']' [ { "PublicDescrip (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json parse error: invalid object key (must be a string) [ { "ArchStdEvent" (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json parse error: invalid object key (must be a string) [ { "EventCode": "0x00 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json parse error: invalid object key (must be a string) [ { "EventCode": "0x00 (right here) ------^ JSON is invalid tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json parse error: invalid object key (must be a string) [ { "EventCode": "0x00 (right here) ------^ JSON is invalid $ After: $ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json JSON is valid tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json JSON is valid tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json JSON is valid tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json JSON is valid tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json JSON is valid tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json JSON is valid tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json JSON is valid tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json JSON is valid tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json JSON is valid tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json JSON is valid tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json JSON is valid tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json JSON is valid tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json JSON is valid tools/perf/pmu-events/arch/arm64/armv8-recommended.json JSON is valid tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json JSON is valid tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json JSON is valid tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json JSON is valid tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json JSON is valid tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json JSON is valid $ Signed-off-by:James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- Nov 12, 2019
-
-
Ian Rogers authored
Using return rather than YYABORT means that the stack isn't cleared up following a failure. The change to YYABORT means the return value is 1 rather than -1, but the callers just check for a result of 0 (success). Add missing free of a list when an error occurs in event_pmu. Signed-off-by:
Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20191109075840.181231-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Ravi Bangoria authored
Perf record with verbose=2 already prints this information along with whole lot of other traces which requires lot of scrolling. Introduce an option to print only perf_event_open() arguments and return value. Sample o/p: $ perf --debug perf-event-open=1 record -- ls > /dev/null ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|PERIOD read_format ID disabled 1 inherit 1 exclude_kernel 1 mmap 1 comm 1 freq 1 enable_on_exec 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 ------------------------------------------------------------ sys_perf_event_open: pid 4308 cpu 0 group_fd -1 flags 0x8 = 4 sys_perf_event_open: pid 4308 cpu 1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 4308 cpu 2 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid 4308 cpu 3 group_fd -1 flags 0x8 = 8 sys_perf_event_open: pid 4308 cpu 4 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid 4308 cpu 5 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid 4308 cpu 6 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid 4308 cpu 7 group_fd -1 flags 0x8 = 12 ------------------------------------------------------------ perf_event_attr: type 1 size 112 config 0x9 watermark 1 sample_id_all 1 bpf_event 1 { wakeup_events, wakeup_watermark } 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ] Committer notes: Just like the 'verbose' variable this new 'debug_peo_args' needs to be added to util/python.c, since we don't link the debug.o file in the python binding, which ended up making 'perf test python' fail with: # perf test -v python 18: 'import perf' in python : --- start --- test child forked, pid 19237 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /tmp/build/perf/python/perf.so: undefined symbol: debug_peo_args test child finished with -1 ---- end ---- 'import perf' in python: FAILED! # After adding that new variable to util/python.c: # perf test -v python 18: 'import perf' in python : --- start --- test child forked, pid 22364 test child finished with 0 ---- end ---- 'import perf' in python: Ok # Signed-off-by:Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191108094128.28769-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
With this 'struct map' uses a bit over 3 cachelines: $ pahole -C map ~/bin/perf <SNIP> /* --- cacheline 2 boundary (128 bytes) --- */ u64 (*unmap_ip)(struct map *, u64); /* 128 8 */ struct dso * dso; /* 136 8 */ refcount_t refcnt; /* 144 4 */ /* size: 152, cachelines: 3, members: 18 */ /* sum members: 145, holes: 1, sum holes: 3 */ /* padding: 4 */ /* forced alignments: 2 */ /* last cacheline: 24 bytes */ } __attribute__((__aligned__(8))); $ We probably can move map->map/unmap_ip() moved to 'struct map_groups', that will shave more 16 bytes, getting this almost to two cachelines. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ymlv3nzpofv2fugnjnizkrwy@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
In the process we can kill some of the struct map->groups usage, trying to get rid of this per-full struct map fields getting in the way of sharing a map across father/parent processes. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-e50eqtqw3za24vmbjnqmmcs6@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
These were the last uses of map->groups, next cset will nuke it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-n3g0foos7l7uxq9nar0zo0vj@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
And fill it whenever we setup a a 'struct map_symbol', now we need to use it, next cset. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-fzwfcnddenz1o7uj1fzw3g46@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
And then stop using map->groups to achieve that. To test that that branch is being taken, probe the function that is only called from there and then run something like 'perf top' in another xterm: # perf probe -x ~/bin/perf machine__map_x86_64_entry_trampolines Added new event: probe_perf:machine__map_x86_64_entry_trampolines (on machine__map_x86_64_entry_trampolines in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:machine__map_x86_64_entry_trampolines -aR sleep 1 # perf trace -e probe_perf:* 0.000 bash/10614 probe_perf:machine__map_x86_64_entry_trampolines(__probe_ip: 5224944) ^C# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-lgrrzdxo2p9liq2keivcg887@git.kernel.org Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
So that we pass that substructure around and with it consolidate lots of functions that receive a (map, symbol) pair and now can receive just a 'struct map_symbol' pointer. This further paves the way to add 'struct map_groups' to 'struct map_symbol' so that we can have all we need for annotation so that we can ditch 'struct map'->groups, i.e. have the map_groups pointer in a more central place, avoiding the pointer in the 'struct map' that have tons of instances. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-fs90ttd9q12l7989fo7pw81q@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
To ease passing around map+symbol, just like done for other parts of the tree recently. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
To help in passing that info around to callchain routines that, for the same reason, are moving to use 'struct map_symbol'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-epsiibeprpxa8qpwji47uskc@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
We are already passing things like: symbol__annotate(ms->sym, ms->map, ...) So shorten the signature of such functions to receive the 'map_symbol' pointer. This also paves the way to having the 'struct map_groups' pointer in the 'struct map_symbol' so that we can get rid of 'struct map'->groups. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-23yx8v1t41nzpkpi7rdrozww@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
From there we can get al->mg->machine, so replace that field with the more useful 'struct map_groups' that for now we're obtaining from al->map->groups, and that is one thing getting into the way of maps being fully shareable. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4qdducrm32tgrjupcp0kjh1e@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
We were just passing a map to look for and reuse its map->groups member, but the idea is that this is going away, as a map can be in multiple rb_trees when being reused via a map_node, so do as all the other map_groups methods and pass as its first arg the object being operated on. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-nmi2pbggqloogwl6vxrvex5a@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
To test that that function is being called I just added a probe on that place, enabled it via 'perf trace' asking for at most 16 levels of backtraces, system wide, and then ran 'perf top' on another xterm, voilà: # perf probe -x ~/bin/perf dso__process_kernel_symbol Added new event: probe_perf:dso__process_kernel_symbol (on dso__process_kernel_symbol in /home/acme/bin/perf) You can now use it in all perf tools, such as: perf record -e probe_perf:dso__process_kernel_symbol -aR sleep 1 # perf trace -e probe_perf:dso__process_kernel_symbol/max-stack=16/ --max-events=2 # perf trace -e probe_perf:dso__process_kernel_symbol/max-stack=16/ --max-events=2 0.000 :17345/17345 probe_perf:dso__process_kernel_symbol(__probe_ip: 5680224) dso__process_kernel_symbol (/home/acme/bin/perf) dso__load_vmlinux (/home/acme/bin/perf) dso__load_vmlinux_path (/home/acme/bin/perf) dso__load (/home/acme/bin/perf) map__load (/home/acme/bin/perf) thread__find_map (/home/acme/bin/perf) machine__resolve (/home/acme/bin/perf) deliver_event (/home/acme/bin/perf) __ordered_events__flush.part.0 (/home/acme/bin/perf) process_thread (/home/acme/bin/perf) start_thread (/usr/lib64/libpthread-2.29.so) 0.064 :17345/17345 probe_perf:dso__process_kernel_symbol(__probe_ip: 5680224) dso__process_kernel_symbol (/home/acme/bin/perf) dso__load_vmlinux (/home/acme/bin/perf) dso__load_vmlinux_path (/home/acme/bin/perf) dso__load (/home/acme/bin/perf) map__load (/home/acme/bin/perf) thread__find_map (/home/acme/bin/perf) machine__resolve (/home/acme/bin/perf) deliver_event (/home/acme/bin/perf) __ordered_events__flush.part.0 (/home/acme/bin/perf) process_thread (/home/acme/bin/perf) start_thread (/usr/lib64/libpthread-2.29.so) # # perf stat -e probe_perf:dso__process_kernel_symbol ^C Performance counter stats for 'system wide': 107,308 probe_perf:dso__process_kernel_symbol 8.215399813 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-5fy66x5hr5ct9pmw84jkiwvm@git.kernel.org Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> -
Arnaldo Carvalho de Melo authored
Its equivalent to using map->groups to obtain the machine struct. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-bdbazuj4ggrmzxdviaqdrdwh@git.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> -
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-5.5-20191107' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf report: Jin Yao: - Introduce --total-cycles, for basic block profiling, further using data obtained from LBR, an example should suffice: # perf record -b ^C[ perf record: Woken up 595 times to write data ] [ perf record: Captured and wrote 156.672 MB perf.data (196873 samples) ] # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY # perf report --total-cycles --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 6M of event 'cycles' # Event count (approx.): 6299936 # # Sampled Sampled Avg Avg # Cycles% Cycles Cycles% Cycles [Program Block Range] Shared Object # ....... ...... ....... ..... .................................... ................ # 2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux] 0.72% 544.5K 0.03% 230 [entry_64.S:657 -> entry_64.S:662] [kernel.vmlinux] 0.56% 541.8K 0.09% 672 [compiler.h:199 -> common.c:300] [kernel.vmlinux] 0.39% 293.2K 0.01% 104 [list_debug.c:43 -> list_debug.c:61] [kernel.vmlinux] 0.36% 278.6K 0.03% 272 [entry_64.S:1289 -> entry_64.S:1308] [kernel.vmlinux] perf record: Adrian Hunter: - Allow storing perf.data in a directory together with a copy of /proc/kcore. Jiwei Sun: - Add support for limit perf output file size, i.e.: # perf record --all-cpus -F 10000 --max-size=4M sleep 10h [ perf record: perf size limit reached (4097 KB), stopping session ] [ perf record: Woken up 6 times to write data ] [ perf record: Captured and wrote 4.048 MB perf.data (54094 samples) ] Terminated # ls -lah perf.data -rw-------. 1 root root 4.1M Nov 7 15:27 perf.data # perf stat: Jiri Olsa: - Add --per-node agregation support: In live mode: # perf stat -a -I 1000 -e cycles --per-node # time node cpus counts unit events 1.000542550 N0 20 6,202,097 cycles 1.000542550 N1 20 639,559 cycles 2.002040063 N0 20 7,412,495 cycles 2.002040063 N1 20 2,185,577 cycles 3.003451699 N0 20 6,508,917 cycles 3.003451699 N1 20 765,607 cycles ... Or in the record/report stat session: # perf stat record -a -I 1000 -e cycles # time counts unit events 1.000536937 10,008,468 cycles 2.002090152 9,578,539 cycles 3.003625233 7,647,869 cycles 4.005135036 7,032,086 cycles ^C 4.340902364 3,923,893 cycles # perf stat report --per-node # time node cpus counts unit events 1.000536937 N0 20 9,355,086 cycles 1.000536937 N1 20 653,382 cycles 2.002090152 N0 20 7,712,838 cycles 2.002090152 N1 20 1,865,701 cycles ... perf probe: Masami Hiramatsu: Various fixes related to recent additions to the DWARF format: - Fix to find range-only function instance - Walk function lines in lexical blocks - Fix to show function entry line as probe-able - Fix wrong address verification - Fix to probe a function which has no entry pc - Fix to probe an inline function which has no entry pc - Fix to list probe event with correct line number - Fix to show inlined function callsite without entry_pc - Fix to show ranges of variables in functions without entry_pc - Return a better scope DIE if there is no best scope - Skip end-of-sequence and non statement lines - Filter out instances except for inlined subroutine and subprogram - Fix to show calling lines of inlined functions - Skip overlapped location on searching variables perf inject: Adrian Hunter: - Do not strip evsels with --strip, as they are needed for create_gcov (see the autofdo example in tools/perf/Documentation/intel-pt.txt). Intel PT: Adrian Hunter: - Intel PT uses an auxtrace_cache to store the results of code-walking, to avoid repeated decoding. Add an auxtrace_cache__remove to handle text poke events. core: Andi Kleen: - Always preserve errno while cleaning up perf_event_open failures. llvm: Arnaldo Carvalho de Melo: - No need to tell that the request for saving a .o file for BPF events, as expressed in ~/.perfconfig was satisfied, make that a debug message. perf vendor events: Intel: Haiyan Song: - Update CascadelakeX events to v1.05. - Update all the Intel JSON metrics from TMAM 3.6. Treewide: Ian Rogers: - Improve error paths, plugging leaks found using LLVM tools such as libFuzzer. jevents: Yunfeng Ye: - Fix resource leak in process_mapfile() and main() perf kvm: Igor Lubashev: - Use evlist layer api when possible. libsubcmd: James Clark: - Move EXTRA_FLAGS to the end to allow overriding existing flags. - Use -O0 with DEBUG=1 perf diff: Jin Yao: - Don't use hack to skip column length calculation CoreSight ETM: Leo yan: - Fix definition of macro TO_CS_QUEUE_NR ARM64: John Garry: - Do not try to include libelf header files when its feature detection failed, fixing the cross build for ARM64. perf tests: Leo Yan: - Fix out of bounds memory access in the backward ring buffer test. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- Nov 11, 2019
-
-
Zheng Yongjun authored
'-Wunused-but-set-variable' triggers this warning: arch/x86/events/amd/core.c: In function amd_pmu_handle_irq: arch/x86/events/amd/core.c:656:6: warning: variable active set but not used [-Wunused-but-set-variable] GCC is right, 'active' is not used anymore. This variable was introduced earlier this year and then removed in: df4d2973 perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp [ mingo: Improved the changelog, fixed build warning caused by this fix, improved surrounding code. ] Reported-by:
Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Cc: <acme@kernel.org>
Cc: <alexander.shishkin@linux.intel.com>
Cc: <mark.rutland@arm.com>
Cc: <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191110094453.113001-1-zhengyongjun3@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-