Skip to content
  1. May 23, 2017
  3. May 14, 2017
  5. May 13, 2017
  7. May 11, 2017
  9. May 10, 2017
    • Nicolas Dichtel's avatar
      arch/include: remove empty Kbuild files · 3e18c637
      Nicolas Dichtel authored 
      

Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      3e18c637
    • Nicolas Dichtel's avatar
      uapi: export all arch specifics directories · 61562f98
      Nicolas Dichtel authored 
      

This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.

The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.

Note that only cris and tile have more directories than only asm:
 - arch-v[10|32] for cris;
 - arch for tile.

Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      61562f98
    • Nicolas Dichtel's avatar
      uapi: export all headers under uapi directories · fcc8487d
      Nicolas Dichtel authored 
      

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.

Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Acked-by: default avatarMark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      fcc8487d
    • Nicolas Dichtel's avatar
      x86: stop exporting msr-index.h to userland · 25dc1d6c
      Nicolas Dichtel authored 
      Even if this file was not in an uapi directory, it was exported because
it was listed in the Kbuild file.

Fixes: b72e7464

 ("x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers")
Suggested-by: default avatarBorislav Petkov <bp@alien8.de>
Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: default avatarIngo Molnar <mingo@kernel.org>
Acked-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      25dc1d6c
    • Nicolas Dichtel's avatar
      nios2: put setup.h in uapi · 4f4ddad3
      Nicolas Dichtel authored 
      

This header file is exported, but from a userland pov, it's just a wrapper
to asm-generic/setup.h.

Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: default avatarTobias Klauser <tklauser@distanz.ch>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      4f4ddad3
    • Nicolas Dichtel's avatar
      h8300: put bitsperlong.h in uapi · 37835671
      Nicolas Dichtel authored 
      

This header file is exported, thus move it to uapi.

Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      37835671
    • Dave Aldridge's avatar
      sparc64: fix fault handling in NGbzero.S and GENbzero.S · 3c7f6221
      Dave Aldridge authored 
      

When any of the functions contained in NGbzero.S and GENbzero.S
vector through *bzero_from_clear_user, we may end up taking a
fault when executing one of the store alternate address space
instructions. If this happens, the exception handler does not
restore the %asi register.

This commit fixes the issue by introducing a new exception
handler that ensures the %asi register is restored when
a fault is handled.

Orabug: 25577560

Signed-off-by: default avatarDave Aldridge <david.j.aldridge@oracle.com>
Reviewed-by: default avatarRob Gardner <rob.gardner@oracle.com>
Reviewed-by: default avatarBabu Moger <babu.moger@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3c7f6221
    • Geliang Tang's avatar
      sparc: use memdup_user_nul in sun4m LED driver · aed74ea0
      Geliang Tang authored 
      

Use memdup_user_nul() helper instead of open-coding to simplify the code.

Signed-off-by: default avatarGeliang Tang <geliangtang@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aed74ea0
    • Ben Hutchings's avatar
      x86, pmem: Fix cache flushing for iovec write < 8 bytes · 8376efd3
      Ben Hutchings authored 
      Commit 11e63f6d added cache flushing for unaligned writes from an
iovec, covering the first and last cache line of a >= 8 byte write and
the first cache line of a < 8 byte write.  But an unaligned write of
2-7 bytes can still cover two cache lines, so make sure we flush both
in that case.

Cc: <stable@vger.kernel.org>
Fixes: 11e63f6d

 ("x86, pmem: fix broken __copy_user_nocache ...")
Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
      8376efd3
    • Mark Rutland's avatar
      arm64: uaccess: suppress spurious clang warning · d135b8b5
      Mark Rutland authored 
      

Clang tries to warn when there's a mismatch between an operand's size,
and the size of the register it is held in, as this may indicate a bug.
Specifically, clang warns when the operand's type is less than 64 bits
wide, and the register is used unqualified (i.e. %N rather than %xN or
%wN).

Unfortunately clang can generate these warnings for unreachable code.
For example, for code like:

do {                                            \
        typeof(*(ptr)) __v = (v);               \
        switch(sizeof(*(ptr))) {                \
        case 1:                                 \
                // assume __v is 1 byte wide    \
                asm ("{op}b %w0" : : "r" (v));  \
                break;                          \
        case 8:                                 \
                // assume __v is 8 bytes wide   \
                asm ("{op} %0" : : "r" (v));    \
                break;                          \
        }
while (0)

... if op() were passed a char value and pointer to char, clang may
produce a warning for the unreachable case where sizeof(*(ptr)) is 8.

For the same reasons, clang produces warnings when __put_user_err() is
used for types that are less than 64 bits wide.

We could avoid this with a cast to a fixed-width type in each of the
cases. However, GCC will then warn that pointer types are being cast to
mismatched integer sizes (in unreachable paths).

Another option would be to use the same union trickery as we do for
__smp_store_release() and __smp_load_acquire(), but this is fairly
invasive.

Instead, this patch suppresses the clang warning by using an x modifier
in the assembly for the 8 byte case of __put_user_err(). No additional
work is necessary as the value has been cast to typeof(*(ptr)), so the
compiler will have performed any necessary extension for the reachable
case.

For consistency, __get_user_err() is also updated to use the x modifier
for its 8 byte case.

Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
Reported-by: default avatarMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      d135b8b5
    • Mark Rutland's avatar
      arm64: atomic_lse: match asm register sizes · 8997c934
      Mark Rutland authored 
      

The LSE atomic code uses asm register variables to ensure that
parameters are allocated in specific registers. In the majority of cases
we specifically ask for an x register when using 64-bit values, but in a
couple of cases we use a w regsiter for a 64-bit value.

For asm register variables, the compiler only cares about the register
index, with wN and xN having the same meaning. The compiler determines
the register size to use based on the type of the variable. Thus, this
inconsistency is merely confusing, and not harmful to code generation.

For consistency, this patch updates those cases to use the x register
alias. There should be no functional change as a result of this patch.

Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      8997c934
    • Mark Rutland's avatar
      arm64: armv8_deprecated: ensure extension of addr · 55de49f9
      Mark Rutland authored 
      Our compat swp emulation holds the compat user address in an unsigned
int, which it passes to __user_swpX_asm(). When a 32-bit value is passed
in a register, the upper 32 bits of the register are unknown, and we
must extend the value to 64 bits before we can use it as a base address.

This patch casts the address to unsigned long to ensure it has been
suitably extended, avoiding the potential issue, and silencing a related
warning from clang.

Fixes: bd35a4ad

 ("arm64: Port SWP/SWPB emulation support from arm")
Cc: <stable@vger.kernel.org> # 3.19.x-
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      55de49f9
    • Mark Rutland's avatar
      arm64: uaccess: ensure extension of access_ok() addr · a06040d7
      Mark Rutland authored 
      Our access_ok() simply hands its arguments over to __range_ok(), which
implicitly assummes that the addr parameter is 64 bits wide. This isn't
necessarily true for compat code, which might pass down a 32-bit address
parameter.

In these cases, we don't have a guarantee that the address has been zero
extended to 64 bits, and the upper bits of the register may contain
unknown values, potentially resulting in a suprious failure.

Avoid this by explicitly casting the addr parameter to an unsigned long
(as is done on other architectures), ensuring that the parameter is
widened appropriately.

Fixes: 0aea86a2

 ("arm64: User access library functions")
Cc: <stable@vger.kernel.org> # 3.7.x-
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      a06040d7
    • Mark Rutland's avatar
      arm64: ensure extension of smp_store_release value · 994870be
      Mark Rutland authored 
      When an inline assembly operand's type is narrower than the register it
is allocated to, the least significant bits of the register (up to the
operand type's width) are valid, and any other bits are permitted to
contain any arbitrary value. This aligns with the AAPCS64 parameter
passing rules.

Our __smp_store_release() implementation does not account for this, and
implicitly assumes that operands have been zero-extended to the width of
the type being stored to. Thus, we may store unknown values to memory
when the value type is narrower than the pointer type (e.g. when storing
a char to a long).

This patch fixes the issue by casting the value operand to the same
width as the pointer operand in all cases, which ensures that the value
is zero-extended as we expect. We use the same union trickery as
__smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that
pointers are potentially cast to narrower width integers in unreachable
paths.

A whitespace issue at the top of __smp_store_release() is also
corrected.

No changes are necessary for __smp_load_acquire(). Load instructions
implicitly clear any upper bits of the register, and the compiler will
only consider the least significant bits of the register as valid
regardless.

Fixes: 47933ad4 ("arch: Introduce smp_load_acquire(), smp_store_release()")
Fixes: 878a84d5

 ("arm64: add missing data types in smp_load_acquire/smp_store_release")
Cc: <stable@vger.kernel.org> # 3.14.x-
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      994870be
    • Mark Rutland's avatar
      arm64: xchg: hazard against entire exchange variable · fee960be
      Mark Rutland authored 
      The inline assembly in __XCHG_CASE() uses a +Q constraint to hazard
against other accesses to the memory location being exchanged. However,
the pointer passed to the constraint is a u8 pointer, and thus the
hazard only applies to the first byte of the location.

GCC can take advantage of this, assuming that other portions of the
location are unchanged, as demonstrated with the following test case:

union u {
	unsigned long l;
	unsigned int i[2];
};

unsigned long update_char_hazard(union u *u)
{
	unsigned int a, b;

	a = u->i[1];
	asm ("str %1, %0" : "+Q" (*(char *)&u->l) : "r" (0UL));
	b = u->i[1];

	return a ^ b;
}

unsigned long update_long_hazard(union u *u)
{
	unsigned int a, b;

	a = u->i[1];
	asm ("str %1, %0" : "+Q" (*(long *)&u->l) : "r" (0UL));
	b = u->i[1];

	return a ^ b;
}

The linaro 15.08 GCC 5.1.1 toolchain compiles the above as follows when
using -O2 or above:

0000000000000000 <update_char_hazard>:
   0:	d2800001 	mov	x1, #0x0                   	// #0
   4:	f9000001 	str	x1, [x0]
   8:	d2800000 	mov	x0, #0x0                   	// #0
   c:	d65f03c0 	ret

0000000000000010 <update_long_hazard>:
  10:	b9400401 	ldr	w1, [x0,#4]
  14:	d2800002 	mov	x2, #0x0                   	// #0
  18:	f9000002 	str	x2, [x0]
  1c:	b9400400 	ldr	w0, [x0,#4]
  20:	4a000020 	eor	w0, w1, w0
  24:	d65f03c0 	ret

This patch fixes the issue by passing an unsigned long pointer into the
+Q constraint, as we do for our cmpxchg code. This may hazard against
more than is necessary, but this is better than missing a necessary
hazard.

Fixes: 305d454a

 ("arm64: atomics: implement native {relaxed, acquire, release} atomics")
Cc: <stable@vger.kernel.org> # 4.4.x-
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      fee960be
    • Kristina Martsenko's avatar
      arm64: entry: improve data abort handling of tagged pointers · 276e9327
      Kristina Martsenko authored 
      When handling a data abort from EL0, we currently zero the top byte of
the faulting address, as we assume the address is a TTBR0 address, which
may contain a non-zero address tag. However, the address may be a TTBR1
address, in which case we should not zero the top byte. This patch fixes
that. The effect is that the full TTBR1 address is passed to the task's
signal handler (or printed out in the kernel log).

When handling a data abort from EL1, we leave the faulting address
intact, as we assume it's either a TTBR1 address or a TTBR0 address with
tag 0x00. This is true as far as I'm aware, we don't seem to access a
tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to
forget about address tags, and code added in the future may not always
remember to remove tags from addresses before accessing them. So add tag
handling to the EL1 data abort handler as well. This also makes it
consistent with the EL0 data abort handler.

Fixes: d50240a5

 ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Reviewed-by: default avatarDave Martin <Dave.Martin@arm.com>
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      276e9327
    • Kristina Martsenko's avatar
      arm64: hw_breakpoint: fix watchpoint matching for tagged pointers · 7dcd9dd8
      Kristina Martsenko authored 
      When we take a watchpoint exception, the address that triggered the
watchpoint is found in FAR_EL1. We compare it to the address of each
configured watchpoint to see which one was hit.

The configured watchpoint addresses are untagged, while the address in
FAR_EL1 will have an address tag if the data access was done using a
tagged address. The tag needs to be removed to compare the address to
the watchpoints.

Currently we don't remove it, and as a result can report the wrong
watchpoint as being hit (specifically, always either the highest TTBR0
watchpoint or lowest TTBR1 watchpoint). This patch removes the tag.

Fixes: d50240a5

 ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Acked-by: default avatarMark Rutland <mark.rutland@arm.com>
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      7dcd9dd8
    • Kristina Martsenko's avatar
      arm64: traps: fix userspace cache maintenance emulation on a tagged pointer · 81cddd65
      Kristina Martsenko authored 
      When we emulate userspace cache maintenance in the kernel, we can
currently send the task a SIGSEGV even though the maintenance was done
on a valid address. This happens if the address has a non-zero address
tag, and happens to not be mapped in.

When we get the address from a user register, we don't currently remove
the address tag before performing cache maintenance on it. If the
maintenance faults, we end up in either __do_page_fault, where find_vma
can't find the VMA if the address has a tag, or in do_translation_fault,
where the tagged address will appear to be above TASK_SIZE. In both
cases, the address is not mapped in, and the task is sent a SIGSEGV.

This patch removes the tag from the address before using it. With this
patch, the fault is handled correctly, the address gets mapped in, and
the cache maintenance succeeds.

As a second bug, if cache maintenance (correctly) fails on an invalid
tagged address, the address gets passed into arm64_notify_segfault,
where find_vma fails to find the VMA due to the tag, and the wrong
si_code may be sent as part of the siginfo_t of the segfault. With this
patch, the correct si_code is sent.

Fixes: 7dd01aef

 ("arm64: trap userspace "dc cvau" cache operation on errata-affected core")
Cc: <stable@vger.kernel.org> # 4.8.x-
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      81cddd65
  11. May 09, 2017