Pull ARC updates from Vineet Gupta:

 - support for Edge Triggered IRQs in ARC IDU intc

 - other fixes here and there

* tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arc: prefer __section from compiler_attributes.h
  dt-bindings: IDU-intc: Add support for edge-triggered interrupts
  dt-bindings: IDU-intc: Clean up documentation
  ARCv2: IDU-intc: Add support for edge-triggered interrupts
  ARC: unwind: Mark expected switch fall-throughs
  ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations
  ARC: fix typo in setup_dma_ops log message
  ARCv2: entry: early return from exception need not clear U & DE bits

Pull MFD fix from Lee Jones:
 "Identify potentially unused functions in rk808 driver when !PM"

* tag 'mfd-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: rk808: Make PM function declaration static
  mfd: rk808: Mark pm functions __maybe_unused

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes as usual:

   - More coverage of USB-audio descriptor sanity checks

   - A fix for mute LED regression on Conexant HD-audio codecs

   - A few device-specific fixes and quirks for USB-audio and HD-audio

   - A fix for (die-hard remaining) possible race in sequencer core

   - FireWire oxfw regression fix that was introduced in 5.3-rc1"

* tag 'sound-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: oxfw: fix to handle correct stream for PCM playback
  ALSA: seq: Fix potential concurrent access to the deleted pool
  ALSA: usb-audio: Check mixer unit bitmap yet more strictly
  ALSA: line6: Fix memory leak at line6_init_pcm() error path
  ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate()
  ALSA: hda/ca0132 - Add new SBZ quirk
  ALSA: usb-audio: Add implicit fb quirk for Behringer UFX1604
  ALSA: hda - Fixes inverted Conexant GPIO mic mute led

Pull networking fixes from David Miller:

 1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya
    Leoshkevich.

 2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for
    SMC from Jason Baron.

 3) ipv6_mc_may_pull() should return 0 for malformed packets, not
    -EINVAL. From Stefano Brivio.

 4) Don't forget to unpin umem xdp pages in error path of
    xdp_umem_reg(). From Ivan Khoronzhuk.

 5) Fix sta object leak in mac80211, from Johannes Berg.

 6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2
    switches. From Florian Fainelli.

 7) Revert DMA sync removal from r8169 which was causing regressions on
    some MIPS Loongson platforms. From Heiner Kallweit.

 8) Use after free in flow dissector, from Jakub Sitnicki.

 9) Fix NULL derefs of net devices during ICMP processing across
    collect_md tunnels, from Hangbin Liu.

10) proto_register() memory leaks, from Zhang Lin.

11) Set NLM_F_MULTI flag in multipart netlink messages consistently,
    from John Fastabend.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  r8152: Set memory to all 0xFFs on failed reg reads
  openvswitch: Fix conntrack cache with timeout
  ipv4: mpls: fix mpls_xmit for iptunnel
  nexthop: Fix nexthop_num_path for blackhole nexthops
  net: rds: add service level support in rds-info
  net: route dump netlink NLM_F_MULTI flag missing
  s390/qeth: reject oversized SNMP requests
  sock: fix potential memory leak in proto_register()
  MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT
  xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode
  ipv4/icmp: fix rt dst dev null pointer dereference
  openvswitch: Fix log message in ovs conntrack
  bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0
  bpf: fix use after free in prog symbol exposure
  bpf: fix precision tracking in presence of bpf2bpf calls
  flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH
  Revert "r8169: remove not needed call to dma_sync_single_for_device"
  ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev
  net/ncsi: Fix the payload copying for the request coming from Netlink
  qed: Add cleanup in qed_slowpath_start()
  ...

Avoids:
  ../drivers/mfd/rk808.c:771:1: warning: symbol 'rk8xx_pm_ops' \
    was not declared. Should it be static?

Fixes: 5752bc43 ("mfd: rk808: Mark pm functions __maybe_unused")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The newly added suspend/resume functions are only used if CONFIG_PM
is enabled:

drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function]
drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function]

Mark them as __maybe_unused so the compiler can silently drop them
when they are not needed.

Fixes: 586c1b41 ("mfd: rk808: Add RK817 and RK809 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

This updates the documentation for supporting an optional extra interrupt
cell to specify edge vs level triggered.

Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

* Some lines exceeded 80 characters.
* Clarified statement about AUX register interface

Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

This adds support for an optional extra interrupt cell to specify edge
vs level triggered. It is backward compatible with dts files with only
one cell, and will default to level-triggered in such a case.

Note that I had to make a change to idu_irq_set_affinity as well, as
this function was setting the interrupt type to "level" unconditionally,
since this was the only type supported previously.

Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Reviewed-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

When userspace application calls ioctl(2) to configure hardware for PCM
playback substream, ALSA OXFW driver handles incoming AMDTP stream.
In this case, outgoing AMDTP stream should be handled.

This commit fixes the bug for v5.3-rc kernel.

Fixes: 4f380d00 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

get_registers() blindly copies the memory written to by the
usb_control_msg() call even if the underlying urb failed.

This could lead to junk register values being read by the driver, since
some indirect callers of get_registers() ignore the return values. One
example is:
  ocp_read_dword() ignores the return value of generic_ocp_read(), which
  calls get_registers().

So, emulate PCI "Master Abort" behavior by setting the buffer to all
0xFFs when usb_control_msg() fails.

This patch is copied from the r8152 driver (v2.12.0) published by
Realtek (www.realtek.com).

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch addresses a conntrack cache issue with timeout policy.
Currently, we do not check if the timeout extension is set properly in the
cached conntrack entry.  Thus, after packet recirculate from conntrack
action, the timeout policy is not applied properly.  This patch fixes the
aforementioned issue.

Fixes: 06bd2bdf ("openvswitch: Add timeout support to ct action")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the
same for rt->rt_gw_family.  Therefore, when rt->rt_gw_family is checked
in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup
doesn't work anymore.

This issue was found with LTP mpls03 tests.

Fixes: 1550c171 ("ipv4: Prepare rtable for IPv6 gateway")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Donald reported this sequence:
  ip next add id 1 blackhole
  ip next add id 2 blackhole
  ip ro add 1.1.1.1/32 nhid 1
  ip ro add 1.1.1.2/32 nhid 2

would cause a crash. Backtrace is:

[  151.302790] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  151.304043] CPU: 1 PID: 277 Comm: ip Not tainted 5.3.0-rc5+ #37
[  151.305078] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
[  151.306526] RIP: 0010:fib_add_nexthop+0x8b/0x2aa
[  151.307343] Code: 35 f7 81 48 8d 14 01 c7 02 f1 f1 f1 f1 c7 42 04 01 f4 f4 f4 48 89 f2 48 c1 ea 03 65 48 8b 0c 25 28 00 00 00 48 89 4d d0 31 c9 <80> 3c 02 00 74 08 48 89 f7 e8 1a e8 53 ff be 08 00 00 00 4c 89 e7
[  151.310549] RSP: 0018:ffff888116c27340 EFLAGS: 00010246
[  151.311469] RAX: dffffc0000000000 RBX: ffff8881154ece00 RCX: 0000000000000000
[  151.312713] RDX: 0000000000000004 RSI: 0000000000000020 RDI: ffff888115649b40
[  151.313968] RBP: ffff888116c273d8 R08: ffffed10221e3757 R09: ffff888110f1bab8
[  151.315212] R10: 0000000000000001 R11: ffff888110f1bab3 R12: ffff888115649b40
[  151.316456] R13: 0000000000000020 R14: ffff888116c273b0 R15: ffff888115649b40
[  151.317707] FS:  00007f60b4d8d800(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
[  151.319113] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  151.320119] CR2: 0000555671ffdc00 CR3: 00000001136ba005 CR4: 0000000000020ee0
[  151.321367] Call Trace:
[  151.321820]  ? fib_nexthop_info+0x635/0x635
[  151.322572]  fib_dump_info+0xaa4/0xde0
[  151.323247]  ? fib_create_info+0x2431/0x2431
[  151.324008]  ? napi_alloc_frag+0x2a/0x2a
[  151.324711]  rtmsg_fib+0x2c4/0x3be
[  151.325339]  fib_table_insert+0xe2f/0xeee
...

fib_dump_info incorrectly has nhs = 0 for blackhole nexthops, so it
believes the nexthop object is a multipath group (nhs != 1) and ends
up down the nexthop_mpath_fill_node() path which is wrong for a
blackhole.

The blackhole check in nexthop_num_path is leftover from early days
of the blackhole implementation which did not initialize the device.
In the end the design was simpler (fewer special case checks) to set
the device to loopback in nh_info, so the check in nexthop_num_path
should have been removed.

Fixes: 430a0491 ("nexthop: Add support for nexthop groups")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull auxdisplay cleanup from Miguel Ojeda:
 "Make ht16k33_fb_fix and ht16k33_fb_var constant (Nishka Dasgupta)"

* tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linux:
  auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constant

Pull UML fix from Richard Weinberger:
 "Fix time travel mode"

* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: fix time travel mode

Pull UBIFS and JFFS2 fixes from Richard Weinberger:
 "UBIFS:
   - Don't block too long in writeback_inodes_sb()
   - Fix for a possible overrun of the log head
   - Fix double unlock in orphan_delete()

  JFFS2:
   - Remove C++ style from UAPI header and unbreak picky toolchains"

* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Limit the number of pages in shrink_liability
  ubifs: Correctly initialize c->min_log_bytes
  ubifs: Fix double unlock around orphan_delete()
  jffs2: Remove C++ style comments from uapi header

Pull x86 fixes from Thomas Gleixner:
 "A few fixes for x86:

   - Fix a boot regression caused by the recent bootparam sanitizing
     change, which escaped the attention of all people who reviewed that
     code.

   - Address a boot problem on machines with broken E820 tables caused
     by an underflow which ended up placing the trampoline start at
     physical address 0.

   - Handle machines which do not advertise a legacy timer of any form,
     but need calibration of the local APIC timer gracefully by making
     the calibration routine independent from the tick interrupt. Marked
     for stable as well as there seems to be quite some new laptops
     rolled out which expose this.

   - Clear the RDRAND CPUID bit on AMD family 15h and 16h CPUs which are
     affected by broken firmware which does not initialize RDRAND
     correctly after resume. Add a command line parameter to override
     this for machine which either do not use suspend/resume or have a
     fixed BIOS. Unfortunately there is no way to detect this on boot,
     so the only safe decision is to turn it off by default.

   - Prevent RFLAGS from being clobbers in CALL_NOSPEC on 32bit which
     caused fast KVM instruction emulation to break.

   - Explain the Intel CPU model naming convention so that the repeating
     discussions come to an end"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386
  x86/boot: Fix boot regression caused by bootparam sanitizing
  x86/CPU/AMD: Clear RDRAND CPUID bit on AMD family 15h/16h
  x86/boot/compressed/64: Fix boot on machines with broken E820 table
  x86/apic: Handle missing global clockevent gracefully
  x86/cpu: Explain Intel model naming convention

Pull timekeeping fix from Thomas Gleixner:
 "A single fix for a regression caused by the generic VDSO
  implementation where a math overflow causes CLOCK_BOOTTIME to become a
  random number generator"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping/vsyscall: Prevent math overflow in BOOTTIME update

Pull scheduler fix from Thomas Gleixner:
 "Handle the worker management in situations where a task is scheduled
  out on a PI lock contention correctly and schedule a new worker if
  possible"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Schedule new worker even if PI-blocked

Pull perf fixes from Thomas Gleixner:
 "Two small fixes for kprobes and perf:

   - Prevent a deadlock in kprobe_optimizer() causes by reverse lock
     ordering

   - Fix a comment typo"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes: Fix potential deadlock in kprobe_optimizer()
  perf/x86: Fix typo in comment

Pull irq fix from Thomas Gleixner:
 "A single fix for a imbalanced kobject operation in the irq decriptor
  code which was unearthed by the new warnings in the kobject code"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Properly pair kobject_del() with kobject_add()

Mergr misc fixes from Andrew Morton:
 "11 fixes"

Mostly VM fixes, one psi polling fix, and one parisc build fix.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
  mm/zsmalloc.c: fix race condition in zs_destroy_pool
  mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
  mm, page_owner: handle THP splits correctly
  userfaultfd_release: always remove uffd flags and clear vm_userfaultfd_ctx
  psi: get poll_work to run when calling poll syscall next time
  mm: memcontrol: flush percpu vmevents before releasing memcg
  mm: memcontrol: flush percpu vmstats before releasing memcg
  parisc: fix compilation errrors
  mm, page_alloc: move_freepages should not examine struct page of reserved memory
  mm/z3fold.c: fix race between migration and destruction

The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks.  Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.

Reported-by:  <syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull dma-mapping fixes from Christoph Hellwig:
 "Two fixes for regressions in this merge window:

   - select the Kconfig symbols for the noncoherent dma arch helpers on
     arm if swiotlb is selected, not just for LPAE to not break then Xen
     build, that uses swiotlb indirectly through swiotlb-xen

   - fix the page allocator fallback in dma_alloc_contiguous if the CMA
     allocation fails"

* tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: fix zone selection after an unaddressable CMA allocation
  arm: select the dma-noncoherent symbols for all swiotlb builds

The code like this:

	ptr = kmalloc(size, GFP_KERNEL);
	page = virt_to_page(ptr);
	offset = offset_in_page(ptr);
	kfree(page_address(page) + offset);

may produce false-positive invalid-free reports on the kernel with
CONFIG_KASAN_SW_TAGS=y.

In the example above we lose the original tag assigned to 'ptr', so
kfree() gets the pointer with 0xFF tag.  In kfree() we check that 0xFF
tag is different from the tag in shadow hence print false report.

Instead of just comparing tags, do the following:

1) Check that shadow doesn't contain KASAN_TAG_INVALID.  Otherwise it's
   double-free and it doesn't matter what tag the pointer have.

2) If pointer tag is different from 0xFF, make sure that tag in the
   shadow is the same as in the pointer.

Link: http://lkml.kernel.org/r/20190819172540.19581-1-aryabinin@virtuozzo.com


Fixes: 7f94ffbc ("kasan: add hooks implementation for tag-based mode")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In zs_destroy_pool() we call flush_work(&pool->free_work).  However, we
have no guarantee that migration isn't happening in the background at
that time.

Since migration can't directly free pages, it relies on free_work being
scheduled to free the pages.  But there's nothing preventing an
in-progress migrate from queuing the work *after*
zs_unregister_migration() has called flush_work().  Which would mean
pages still pointing at the inode when we free it.

Since we know at destroy time all objects should be free, no new
migrations can come in (since zs_page_isolate() fails for fully-free
zspages).  This means it is sufficient to track a "# isolated zspages"
count by class, and have the destroy logic ensure all such pages have
drained before proceeding.  Keeping that state under the class spinlock
keeps the logic straightforward.

In this case a memory leak could lead to an eventual crash if compaction
hits the leaked page.  This crash would only occur if people are
changing their zswap backend at runtime (which eventually starts
destruction).

Link: http://lkml.kernel.org/r/20190809181751.219326-2-henryburns@google.com


Fixes: 48b4800a ("zsmalloc: page migration support")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In zs_page_migrate() we call putback_zspage() after we have finished
migrating all pages in this zspage.  However, the return value is
ignored.  If a zs_free() races in between zs_page_isolate() and
zs_page_migrate(), freeing the last object in the zspage,
putback_zspage() will leave the page in ZS_EMPTY for potentially an
unbounded amount of time.

To fix this, we need to do the same thing as zs_page_putback() does:
schedule free_work to occur.

To avoid duplicated code, move the sequence to a new
putback_zspage_deferred() function which both zs_page_migrate() and
zs_page_putback() call.

Link: http://lkml.kernel.org/r/20190809181751.219326-1-henryburns@google.com


Fixes: 48b4800a ("zsmalloc: page migration support")
Signed-off-by: Henry Burns <henryburns@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

THP splitting path is missing the split_page_owner() call that
split_page() has.

As a result, split THP pages are wrongly reported in the page_owner file
as order-9 pages.  Furthermore when the former head page is freed, the
remaining former tail pages are not listed in the page_owner file at
all.  This patch fixes that by adding the split_page_owner() call into
__split_huge_page().

Link: http://lkml.kernel.org/r/20190820131828.22684-2-vbabka@suse.cz


Fixes: a9627bc5 ("mm/page_owner: introduce split_page_owner and replace manual handling")
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd_release() should clear vm_flags/vm_userfaultfd_ctx even if
mm->core_state != NULL.

Otherwise a page fault can see userfaultfd_missing() == T and use an
already freed userfaultfd_ctx.

Link: http://lkml.kernel.org/r/20190820160237.GB4983@redhat.com


Fixes: 04f5866e ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Only when calling the poll syscall the first time can user receive
POLLPRI correctly.  After that, user always fails to acquire the event
signal.

Reproduce case:
 1. Get the monitor code in Documentation/accounting/psi.txt
 2. Run it, and wait for the event triggered.
 3. Kill and restart the process.

The question is why we can end up with poll_scheduled = 1 but the work
not running (which would reset it to 0).  And the answer is because the
scheduling side sees group->poll_kworker under RCU protection and then
schedules it, but here we cancel the work and destroy the worker.  The
cancel needs to pair with resetting the poll_scheduled flag.

Link: http://lkml.kernel.org/r/1566357985-97781-1-git-send-email-joseph.qi@linux.alibaba.com


Signed-off-by: Jason Xing <kerneljasonxing@linux.alibaba.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Caspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Similar to vmstats, percpu caching of local vmevents leads to an
accumulation of errors on non-leaf levels.  This happens because some
leftovers may remain in percpu caches, so that they are never propagated
up by the cgroup tree and just disappear into nonexistence with on
releasing of the memory cgroup.

To fix this issue let's accumulate and propagate percpu vmevents values
before releasing the memory cgroup similar to what we're doing with
vmstats.

Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.

Link: http://lkml.kernel.org/r/20190819202338.363363-4-guro@fb.com


Fixes: 42a30035 ("mm: memcontrol: fix recursive statistics correctness & scalabilty")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Percpu caching of local vmstats with the conditional propagation by the
cgroup tree leads to an accumulation of errors on non-leaf levels.

Let's imagine two nested memory cgroups A and A/B.  Say, a process
belonging to A/B allocates 100 pagecache pages on the CPU 0.  The percpu
cache will spill 3 times, so that 32*3=96 pages will be accounted to A/B
and A atomic vmstat counters, 4 pages will remain in the percpu cache.

Imagine A/B is nearby memory.max, so that every following allocation
triggers a direct reclaim on the local CPU.  Say, each such attempt will
free 16 pages on a new cpu.  That means every percpu cache will have -16
pages, except the first one, which will have 4 - 16 = -12.  A/B and A
atomic counters will not be touched at all.

Now a user removes A/B.  All percpu caches are freed and corresponding
vmstat numbers are forgotten.  A has 96 pages more than expected.

As memory cgroups are created and destroyed, errors do accumulate.  Even
1-2 pages differences can accumulate into large numbers.

To fix this issue let's accumulate and propagate percpu vmstat values
before releasing the memory cgroup.  At this point these numbers are
stable and cannot be changed.

Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.

Link: http://lkml.kernel.org/r/20190819202338.363363-2-guro@fb.com


Fixes: 42a30035 ("mm: memcontrol: fix recursive statistics correctness & scalabilty")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0cfaee2a ("include/asm-generic/5level-fixup.h: fix variable
'p4d' set but not used") converted a few functions from macros to static
inline, which causes parisc to complain,

  In file included from include/asm-generic/4level-fixup.h:38:0,
                   from arch/parisc/include/asm/pgtable.h:5,
                   from arch/parisc/include/asm/io.h:6,
                   from include/linux/io.h:13,
                   from sound/core/memory.c:9:
  include/asm-generic/5level-fixup.h:14:18: error: unknown type name 'pgd_t'; did you mean 'pid_t'?
   #define p4d_t    pgd_t
                    ^
  include/asm-generic/5level-fixup.h:24:28: note: in expansion of macro 'p4d_t'
   static inline int p4d_none(p4d_t p4d)
                              ^~~~~

It is because "4level-fixup.h" is included before "asm/page.h" where
"pgd_t" is defined.

Link: http://lkml.kernel.org/r/20190815205305.1382-1-cai@lca.pw


Fixes: 0cfaee2a ("include/asm-generic/5level-fixup.h: fix variable 'p4d' set but not used")
Signed-off-by: Qian Cai <cai@lca.pw>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After commit 907ec5fc ("mm: zero remaining unavailable struct
pages"), struct page of reserved memory is zeroed.  This causes
page->flags to be 0 and fixes issues related to reading
/proc/kpageflags, for example, of reserved memory.

The VM_BUG_ON() in move_freepages_block(), however, assumes that
page_zone() is meaningful even for reserved memory.  That assumption is
no longer true after the aforementioned commit.

There's no reason why move_freepages_block() should be testing the
legitimacy of page_zone() for reserved memory; its scope is limited only
to pages on the zone's freelist.

Note that pfn_valid() can be true for reserved memory: there is a
backing struct page.  The check for page_to_nid(page) is also buggy but
reserved memory normally only appears on node 0 so the zeroing doesn't
affect this.

Move the debug checks to after verifying PageBuddy is true.  This
isolates the scope of the checks to only be for buddy pages which are on
the zone's freelist which move_freepages_block() is operating on.  In
this case, an incorrect node or zone is a bug worthy of being warned
about (and the examination of struct page is acceptable bcause this
memory is not reserved).

Why does move_freepages_block() gets called on reserved memory? It's
simply math after finding a valid free page from the per-zone free area
to use as fallback.  We find the beginning and end of the pageblock of
the valid page and that can bring us into memory that was reserved per
the e820.  pfn_valid() is still true (it's backed by a struct page), but
since it's zero'd we shouldn't make any inferences here about comparing
its node or zone.  The current node check just happens to succeed most
of the time by luck because reserved memory typically appears on node 0.

The fix here is to validate that we actually have buddy pages before
testing if there's any type of zone or node strangeness going on.

We noticed it almost immediately after bringing 907ec5fc in on
CONFIG_DEBUG_VM builds.  It depends on finding specific free pages in
the per-zone free area where the math in move_freepages() will bring the
start or end pfn into reserved memory and wanting to claim that entire
pageblock as a new migratetype.  So the path will be rare, require
CONFIG_DEBUG_VM, and require fallback to a different migratetype.

Some struct pages were already zeroed from reserve pages before
907ec5fca3c so it theoretically could trigger before this commit.  I
think it's rare enough under a config option that most people don't run
that others may not have noticed.  I wouldn't argue against a stable tag
and the backport should be easy enough, but probably wouldn't single out
a commit that this is fixing.

Mel said:

: The overhead of the debugging check is higher with this patch although
: it'll only affect debug builds and the path is not particularly hot.
: If this was a concern, I think it would be reasonable to simply remove
: the debugging check as the zone boundaries are checked in
: move_freepages_block and we never expect a zone/node to be smaller than
: a pageblock and stuck in the middle of another zone.

Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1908122036560.10779@chino.kir.corp.google.com


Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In z3fold_destroy_pool() we call destroy_workqueue(&pool->compact_wq).
However, we have no guarantee that migration isn't happening in the
background at that time.

Migration directly calls queue_work_on(pool->compact_wq), if destruction
wins that race we are using a destroyed workqueue.

Link: http://lkml.kernel.org/r/20190809213828.202833-1-henryburns@google.com


Signed-off-by: Henry Burns <henryburns@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

>From IB specific 7.6.5 SERVICE LEVEL, Service Level (SL)
is used to identify different flows within an IBA subnet.
It is carried in the local route header of the packet.

Before this commit, run "rds-info -I". The outputs are as
below:
"
RDS IB Connections:
 LocalAddr  RemoteAddr Tos SL  LocalDev               RemoteDev
192.2.95.3  192.2.95.1  2   0  fe80::21:28:1a:39  fe80::21:28:10:b9
192.2.95.3  192.2.95.1  1   0  fe80::21:28:1a:39  fe80::21:28:10:b9
192.2.95.3  192.2.95.1  0   0  fe80::21:28:1a:39  fe80::21:28:10:b9
"
After this commit, the output is as below:
"
RDS IB Connections:
 LocalAddr  RemoteAddr Tos SL  LocalDev               RemoteDev
192.2.95.3  192.2.95.1  2   2  fe80::21:28:1a:39  fe80::21:28:10:b9
192.2.95.3  192.2.95.1  1   1  fe80::21:28:1a:39  fe80::21:28:10:b9
192.2.95.3  192.2.95.1  0   0  fe80::21:28:1a:39  fe80::21:28:10:b9
"

The commit fe3475af ("net: rds: add per rds connection cache
statistics") adds cache_allocs in struct rds_info_rdma_connection
as below:
struct rds_info_rdma_connection {
...
        __u32           rdma_mr_max;
        __u32           rdma_mr_size;
        __u8            tos;
        __u32           cache_allocs;
 };
The peer struct in rds-tools of struct rds_info_rdma_connection is as
below:
struct rds_info_rdma_connection {
...
        uint32_t        rdma_mr_max;
        uint32_t        rdma_mr_size;
        uint8_t         tos;
        uint8_t         sl;
        uint32_t        cache_allocs;
};
The difference between userspace and kernel is the member variable sl.
In the kernel struct, the member variable sl is missing. This will
introduce risks. So it is necessary to use this commit to avoid this risk.

Fixes: fe3475af ("net: rds: add per rds connection cache statistics")
CC: Joe Jin <joe.jin@oracle.com>
CC: JUNXIAO_BI <junxiao.bi@oracle.com>
Suggested-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An excerpt from netlink(7) man page,

  In multipart messages (multiple nlmsghdr headers with associated payload
  in one byte stream) the first and all following headers have the
  NLM_F_MULTI flag set, except for the last  header  which  has the type
  NLMSG_DONE.

but, after (ee28906f) there is a missing NLM_F_MULTI flag in the middle of a
FIB dump. The result is user space applications following above man page
excerpt may get confused and may stop parsing msg believing something went
wrong.

In the golang netlink lib [0] the library logic stops parsing believing the
message is not a multipart message. Found this running Cilium[1] against
net-next while adding a feature to auto-detect routes. I noticed with
multiple route tables we no longer could detect the default routes on net
tree kernels because the library logic was not returning them.

Fix this by handling the fib_dump_info_fnhe() case the same way the
fib_dump_info() handles it by passing the flags argument through the
call chain and adding a flags argument to rt_fill_info().

Tested with Cilium stack and auto-detection of routes works again. Also
annotated libs to dump netlink msgs and inspected NLM_F_MULTI and
NLMSG_DONE flags look correct after this.

Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same
as is done for fib_dump_info() so this looks correct to me.

[0] https://github.com/vishvananda/netlink/
[1] https://github.com/cilium/



Fixes: ee28906f ("ipv4: Dump route exceptions if requested")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>