- May 21, 2014
-
-
Gabriel FERNANDEZ authored
Interconnect clocks are not yet managed at the init, then we have to start the kernel with clk_ignore_unused. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen A9 Signed-off-by:
Pankaj Dev <pankaj.dev@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
CLK_S_GMAC0_PHY & CLK_S_ETH1_PH clocks are no longer used. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
CLK_S_ICN_REG_0 clock is no longer used. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen A0/1/10/11/12 Signed-off-by:
Pankaj Dev <pankaj.dev@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen A9/DDR/GPU Signed-off-by:
Pankaj Dev <pankaj.dev@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen B/C/D/E/F Signed-off-by:
Pankaj Dev <pankaj.dev@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
CLK_S_GMAC0_PHY & CLK_S_ETH1_PH clocks are no longer used. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
CLK_S_ICN_REG_0 clock is no longer used. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen A0/1/10/11/12 Signed-off-by:
Pankaj Dev <pankaj.dev@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
all-caps node name is not very usual. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
Add keyscan setup for stih415/h416 b2000. Both have same raw/column lines number, debounce time and keymap. Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
Add keyscan support for stih416. It is disabled by default given that it is not enabled on all boards. Also there are PIOs conflict with already claimed lines. Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Gabriel FERNANDEZ authored
Add keyscan support for stih415. It is put disabled by default because it is not enabled on all boards Also there are PIOs conflict with already claimed lines. Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Maxime Coquelin authored
B2120 HDK is the reference board for STiH407 SoC. It has the following characteristics: - 1GB DDR3 - 8GB eMMC / SD-Card slot - 32MB NOR Flash - 1 x Gbit Ethernet - 1 x USB 3.0 port - 1 x Mini-PCIe - 1 x SATA - 1 x HDMI output - 1 x HDMI input - 1 x SPDIF This patch only introduces basic functionnalities, such as I2C and UART. Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Maxime Coquelin authored
The STiH407 is advanced multi-HD AVC processor with 3D graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU. Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Maxime Coquelin authored
The compatible strings have to be ordered from specific to generic. This patch fixes this for STi boards, which did the exact opposite. Cc: Olof Johansson <olof@lixom.net> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Maxime Coquelin authored
The boards have to be sorted in alphanumerical order in the Makefile. Cc: Olof Johansson <olof@lixom.net> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
- Apr 04, 2014
-
-
Andrzej Hajda authored
The patch changes fimd node status to OK. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
The patch changes fimd node status to OK. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
The patch adds s6e8aa0 panel node for trats2. It adds also trats2 specific properties for DSI and regulator required by panel. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
The patch adds s6e8aa0 panel node for trats. It adds also trats specific properties for DSI. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
This is a common part of DSI node for all Exynos4 boards. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
This patch replaces panel bindings for panel initialized by boot loader with bindings to proper ld9040 panel. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Maxime Ripard authored
Switch the device tree to the new compatibles introduced in the RTC drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Mar 31, 2014
-
-
Hans de Goede authored
The IRQ line used in sun6i-a31.dtsi for the NMI controller is wrong. This causes a IRQ storm since the NMI controller is repeatedly fired. This patch fixes this problem assigning the correct IRQ number to the NMI controller. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Carlo Caione <carlo@caione.org> Cc: maxime.ripard@free-electrons.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1395939759-11135-2-git-send-email-carlo@caione.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- Mar 29, 2014
-
-
Barry Song authored
move to support of_dma_request_slave_channel() and dma_request_slave_channel. we add a xlate() to let dma clients be able to find right dma_chan by generic "dmas" properties in dts. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Vinod Koul <vinod.koul@intel.com>
-
Dinh Nguyen authored
This patch adds the dts bindings documenation for the Altera SOCFPGA glue layer for the Synopsys STMMAC ethernet driver. Signed-off-by:
Dinh Nguyen <dinguyen@altera.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- Mar 27, 2014
-
-
Lee Jones authored
Here we add the necessary device nodes required for successful device probing and Pinctrl setup for the FSM when booting on an STiH415 (Orly1) or STiH416 (Orly2) based b2020 development board. Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by Angus Clark <angus.clark@st.com> Acked-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Lee Jones authored
Here we add the necessary device nodes required for successful device probing and Pinctrl setup for the FSM when booting on an STiH416 (Orly2). Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by Angus Clark <angus.clark@st.com> Acked-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
This reverts commit 7e0b4cd0 . The binding changes need to be done differently as well, let's take them through netdev, and merge the dts changes in a new patch here. Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Stephen Warren authored
Neither Tegra114 nor Tegra124 allow "low power mode" to be configured on SDIO1 or SDIO3 drive groups. Remove the attempt to configure that option from the Dalmore and Venice2 DTs. The Venice2 DT contained duplicate configurations for most sdmmc1_* pins. Remove the duplicate pins from one of the nodes, and fix the configuration since the remaining clk pin is output-only. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- Mar 26, 2014
-
-
Carlo Caione authored
This patch adds DTS entries for NMI controller as child of GIC. Signed-off-by:
Carlo Caione <carlo@caione.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Cc: mark.rutland@arm.com Cc: hdegoede@redhat.com Acked-by:
<maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/1395256879-8475-3-git-send-email-carlo@caione.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- Mar 23, 2014
-
-
Andrzej Hajda authored
The patch adds fimd node with display timings for exynos4210-universal device. It also makes LCD regulators always on. This allow to re-use panel initialized by boot loader. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
- Mar 21, 2014
-
-
Stephen Warren authored
Remove some entries from Dalmore's device tree that attempt to set some options which aren't supported for the drive_gma pin group. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Ivan Khoronzhuk authored
As suggested by Olof Johansson at http://www.spinics.net/lists/arm-kernel/msg314009.html . It be better just keeping a "ti,keystone" top-level compatible and just using that to probe. If so we don't have to touch the file for new boards in the future. So use common "ti,keystone" compatible in keystone.c for all boards. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Murali Karicheri authored
The UBIFS partition size was incorrectly defined as for 128M NAND, but on k2hk-evm installed NAND flash size is 512M. Hence, correct it. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Tushar Behera authored
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Reviewed-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Tushar Behera authored
LDO3 and LDO23 need to be enabled in order for soft-reset to work. Additionally LDO9 needs to be enabled for USB operations. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Tushar Behera authored
MDMA1 can support both secure and non-secure AXI transactions. When this is enabled in the kernel for boards that run in secure mode, we get imprecise external aborts causing the kernel to oops. Unhandled fault: imprecise external abort (0x1406) at 0x00000000 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 Suggested-by:
Javi Merino <javi.merino@arm.com> Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Tested-by:
Javi Merino <javi.merino@arm.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-