Pull iommu fixes from Joerg Roedel:
 "Two fixes:

   - Fix NULL-ptr dereference bug in Intel IOMMU driver

   - Properly save and restore AMD IOMMU performance counter registers
     when testing if they are writable"

* tag 'iommu-fixes-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix IOMMU perf counter clobbering during init
  iommu/vt-d: Call __dmar_remove_one_dev_info with valid pointer

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.5:

   - Fix our hash MMU code to avoid having overlapping ids between user
     and kernel, which isn't as bad as it sounds but led to crashes on
     some machines.

   - A fix for the Power9 XIVE interrupt code, which could return the
     wrong interrupt state in obscure error conditions.

   - A minor Kconfig fix for the recently added CONFIG_PPC_UV code.

  Thanks to Aneesh Kumar K.V, Bharata B Rao, Cédric Le Goater, Frederic
  Barrat"

* tag 'powerpc-5.5-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/hash: Fix sharing context ids between kernel & userspace
  powerpc/xive: Discard ESB load value when interrupt is invalid
  powerpc: Ultravisor: Fix the dependencies for CONFIG_PPC_UV

Pull drm fixes from Dave Airlie:
 "This one has a core mst fix and two i915 fixes. amdgpu just enables
  some hw outside experimental.

  The panfrost fix is a little bigger than I'd like at this stage but it
  fixes a fairly fundamental problem with global shared buffers in that
  driver, and since it's confined to that driver and I've taken a look
  at it, I think it's fine to get into the tree now, so it can get
  stable propagated as well.

  core/mst:
   - Fix SST branch device handling

  amdgpu:
   - enable renoir outside experimental

  i915:
   - Avoid overflow with huge userptr objects
   - uAPI fix to correctly handle negative values in
     engine->uabi_class/instance (cc: stable)

  panfrost:
   - Fix mapping of globally visible BO's (Boris)"

* tag 'drm-fixes-2020-01-24' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: remove the experimental flag for renoir
  drm/panfrost: Add the panfrost_gem_mapping concept
  drm/i915: Align engine->uabi_class/instance with i915_drm.h
  drm/i915/userptr: fix size calculation
  drm/dp_mst: Handle SST-only branch device case

The range passed to user_access_begin() by strncpy_from_user() and
strnlen_user() starts at 'src' and goes up to the limit of userspace
although reads will be limited by the 'count' param.

On 32 bits powerpc (book3s/32) access has to be granted for each
256Mbytes segment and the cost increases with the number of segments to
unlock.

Limit the range with 'count' param.

Fixes: 594cc251

 ("make 'user_access_begin()' do 'access_ok()'")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init_iommu_perf_ctr() clobbers the register when it checks write access
to IOMMU perf counters and fails to restore when they are writable.

Add save and restore to fix it.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 30861ddc

 ("perf/x86/amd: Add IOMMU Performance Counter resource management")
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

It is possible for archdata.iommu to be set to
DEFER_DEVICE_DOMAIN_INFO or DUMMY_DEVICE_DOMAIN_INFO so check for
those values before calling __dmar_remove_one_dev_info. Without a
check it can result in a null pointer dereference. This has been seen
while booting a kdump kernel on an HP dl380 gen9.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org # 5.3+
Cc: linux-kernel@vger.kernel.org
Fixes: ae23bfb6

 ("iommu/vt-d: Detach domain before using a private one")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC host fixes:

   - sdhci: Fix minimum clock rate for v3 controllers

   - sdhci-tegra: Fix SDR50 tuning override

   - sdhci_am654: Fixup tuning issues and support for CQHCI

   - sdhci_am654: Remove wrong write protect flag"

* tag 'mmc-v5.5-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci: fix minimum clock rate for v3 controller
  mmc: tegra: fix SDR50 tuning override
  mmc: sdhci_am654: Fix Command Queuing in AM65x
  mmc: sdhci_am654: Reset Command and Data line after tuning
  mmc: sdhci_am654: Remove Inverted Write Protect flag

Merge tag 'amd-drm-fixes-5.5-2020-01-23' of git://people.freedesktop.org/~agd5f/linux

 into drm-fixes

amd-drm-fixes-5.5-2020-01-23:

amdgpu:
- remove the experimental flag from renoir

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123191424.3849-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2020-01-23' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-fixes

- Avoid overflow with huge userptr objects
- uAPI fix to correctly handle negative values in
  engine->uabi_class/instance (cc: stable)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135045.GA12584@jlahtine-desk.ger.corp.intel.com

Pull XArray fixes from Matthew Wilcox:
 "Primarily bugfixes, mostly around handling index wrap-around
  correctly.

  A couple of doc fixes and adding missing APIs.

  I had an oops live on stage at linux.conf.au this year, and it turned
  out to be a bug in xas_find() which I can't prove isn't triggerable in
  the current codebase. Then in looking for the bug, I spotted two more
  bugs.

  The bots have had a few days to chew on this with no problems
  reported, and it passes the test-suite (which now has more tests to
  make sure these problems don't come back)"

* tag 'xarray-5.5' of git://git.infradead.org/users/willy/linux-dax:
  XArray: Add xa_for_each_range
  XArray: Fix xas_find returning too many entries
  XArray: Fix xa_find_after with multi-index entries
  XArray: Fix infinite loop with entry at ULONG_MAX
  XArray: Add wrappers for nested spinlocks
  XArray: Improve documentation of search marks
  XArray: Fix xas_pause at ULONG_MAX

Pull tracing fixes from Steven Rostedt:
 "Various tracing fixes:

   - Fix a function comparison warning for a xen trace event macro

   - Fix a double perf_event linking to a trace_uprobe_filter for
     multiple events

   - Fix suspicious RCU warnings in trace event code for using
     list_for_each_entry_rcu() when the "_rcu" portion wasn't needed.

   - Fix a bug in the histogram code when using the same variable

   - Fix a NULL pointer dereference when tracefs lockdown enabled and
     calling trace_set_default_clock()

   - A fix to a bug found with the double perf_event linking patch"

* tag 'trace-v5.5-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/uprobe: Fix to make trace_uprobe_filter alignment safe
  tracing: Do not set trace clock if tracefs lockdown is in effect
  tracing: Fix histogram code when expression has same var as value
  tracing: trigger: Replace unneeded RCU-list traversals
  tracing/uprobe: Fix double perf_event linking on multiprobe uprobe
  tracing: xen: Ordered comparison of function pointers

Pull ceph fix from Ilya Dryomov:
 "A fix for a potential use-after-free from Jeff, marked for stable"

* tag 'ceph-for-5.5-rc8' of https://github.com/ceph/ceph-client:
  ceph: hold extra reference to r_parent over life of request

Pull power management fix from Rafael Wysocki:
 "Prevent the kernel from crashing during resume from hibernation if
  free pages contain leftover data from the restore kernel and
  init_on_free is set (Alexander Potapenko)"

* tag 'pm-5.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: hibernate: fix crashes with init_on_free=1

Pull PCI fix from Bjorn Helgaas:
 "Mark ATS as broken on AMD Navi14 GPU rev 0xc5 (Alex Deucher)"

* tag 'pci-v5.5-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken

In commit 9f79b78e ("Convert filldir[64]() from __put_user() to
unsafe_put_user()") I changed filldir to not do individual __put_user()
accesses, but instead use unsafe_put_user() surrounded by the proper
user_access_begin/end() pair.

That make them enormously faster on modern x86, where the STAC/CLAC
games make individual user accesses fairly heavy-weight.

However, the user_access_begin() range was not really the exact right
one, since filldir() has the unfortunate problem that it needs to not
only fill out the new directory entry, it also needs to fix up the
previous one to contain the proper file offset.

It's unfortunate, but the "d_off" field in "struct dirent" is _not_ the
file offset of the directory entry itself - it's the offset of the next
one.  So we end up backfilling the offset in the previous entry as we
walk along.

But since x86 didn't really care about the exact range, and used to be
the only architecture that did anything fancy in user_access_begin() to
begin with, the filldir[64]() changes did something lazy, and even
commented on it:

	/*
	 * Note! This range-checks 'previous' (which may be NULL).
	 * The real range was checked in getdents
	 */
	if (!user_access_begin(dirent, sizeof(*dirent)))
		goto efault;

and it all worked fine.

But now 32-bit ppc is starting to also implement user_access_begin(),
and the fact that we faked the range to only be the (possibly not even
valid) previous directory entry becomes a problem, because ppc32 will
actually be using the range that is passed in for more than just "check
that it's user space".

This is a complete rewrite of Christophe's original patch.

By saving off the record length of the previous entry instead of a
pointer to it in the filldir data structures, we can simplify the range
check and the writing of the previous entry d_off field.  No need for
any conditionals in the user accesses themselves, although we retain the
conditional EINTR checking for the "was this the first directory entry"
signal handling latency logic.

Fixes: 9f79b78e ("Convert filldir[64]() from __put_user() to unsafe_put_user()")
Link: https://lore.kernel.org/lkml/a02d3426f93f7eb04960a4d9140902d278cab0bb.1579697910.git.christophe.leroy@c-s.fr/
Link: https://lore.kernel.org/lkml/408c90c4068b00ea8f1c41cca45b84ec23d4946b.1579783936.git.christophe.leroy@c-s.fr/


Reported-and-tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 8a23eb80

 ("Make filldir[64]() verify the directory entry
filename is valid") added some minimal validity checks on the directory
entries passed to filldir[64]().  But they really were pretty minimal.

This fleshes out at least the name length check: we used to disallow
zero-length names, but really, negative lengths or oevr-long names
aren't ok either.  Both could happen if there is some filesystem
corruption going on.

Now, most filesystems tend to use just an "unsigned char" or similar for
the length of a directory entry name, so even with a corrupt filesystem
you should never see anything odd like that.  But since we then use the
name length to create the directory entry record length, let's make sure
it actually is half-way sensible.

Note how POSIX states that the size of a path component is limited by
NAME_MAX, but we actually use PATH_MAX for the check here.  That's
because while NAME_MAX is generally the correct maximum name length
(it's 255, for the same old "name length is usually just a byte on
disk"), there's nothing in the VFS layer that really cares.

So the real limitation at a VFS layer is the total pathname length you
can pass as a filename: PATH_MAX.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Should work properly with the latest sbios on 5.5 and newer
kernels.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Commit 0034d395 ("powerpc/mm/hash64: Map all the kernel regions in
the same 0xc range") has a bug in the definition of MIN_USER_CONTEXT.

The result is that the context id used for the vmemmap and the lowest
context id handed out to userspace are the same. The context id is
essentially the process identifier as far as the first stage of the
MMU translation is concerned.

This can result in multiple SLB entries with the same VSID (Virtual
Segment ID), accessible to the kernel and some random userspace
process that happens to get the overlapping id, which is not expected
eg:

  07 c00c000008000000 40066bdea7000500  1T  ESID=   c00c00  VSID=      66bdea7 LLP:100
  12 0002000008000000 40066bdea7000d80  1T  ESID=      200  VSID=      66bdea7 LLP:100

Even though the user process and the kernel use the same VSID, the
permissions in the hash page table prevent the user process from
reading or writing to any kernel mappings.

It can also lead to SLB entries with different base page size
encodings (LLP), eg:

  05 c00c000008000000 00006bde0053b500 256M ESID=c00c00000  VSID=    6bde0053b LLP:100
  09 0000000008000000 00006bde0053bc80 256M ESID=        0  VSID=    6bde0053b LLP:  0

Such SLB entries can result in machine checks, eg. as seen on a G5:

  Oops: Machine check, sig: 7 [#1]
  BE PAGE SIZE=64K MU-Hash SMP NR_CPUS=4 NUMA Power Mac
  NIP: c00000000026f248 LR: c000000000295e58 CTR: 0000000000000000
  REGS: c0000000erfd3d70 TRAP: 0200 Tainted: G M (5.5.0-rcl-gcc-8.2.0-00010-g228b667d8ea1)
  MSR: 9000000000109032 <SF,HV,EE,ME,IR,DR,RI> CR: 24282048 XER: 00000000
  DAR: c00c000000612c80 DSISR: 00000400 IRQMASK: 0
  ...
  NIP [c00000000026f248] .kmem_cache_free+0x58/0x140
  LR  [c088000008295e58] .putname 8x88/0xa
  Call Trace:
    .putname+0xB8/0xa
    .filename_lookup.part.76+0xbe/0x160
    .do_faccessat+0xe0/0x380
    system_call+0x5c/ex68

This happens with 256MB segments and 64K pages, as the duplicate VSID
is hit with the first vmemmap segment and the first user segment, and
older 32-bit userspace maps things in the first user segment.

On other CPUs a machine check is not seen. Instead the userspace
process can get stuck continuously faulting, with the fault never
properly serviced, due to the kernel not understanding that there is
already a HPTE for the address but with inaccessible permissions.

On machines with 1T segments we've not seen the bug hit other than by
deliberately exercising it. That seems to be just a matter of luck
though, due to the typical layout of the user virtual address space
and the ranges of vmemmap that are typically populated.

To fix it we add 2 to MIN_USER_CONTEXT. This ensures the lowest
context given to userspace doesn't overlap with the VMEMMAP context,
or with the context for INVALID_REGION_ID.

Fixes: 0034d395

 ("powerpc/mm/hash64: Map all the kernel regions in the same 0xc range")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Christian Marillat <marillat@debian.org>
Reported-by: Romain Dolbeau <romain@dolbeau.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Account for INVALID_REGION_ID, mostly rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123102547.11623-1-mpe@ellerman.id.au

Merge tag 'drm-misc-fixes-2020-01-22-1' of git://anongit.freedesktop.org/drm/drm-misc

 into drm-fixes

-mst: Fix SST branch device handling (Wayne)
-panfrost: Fix mapping of globally visible BO's (Boris)

Cc: Wayne Lin <Wayne.Lin@amd.com>
CC: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122213725.GA22099@art_vandelay

Pull LED fixes from Pavel Machek:
 "Jacek's fix for an uninitialized gpio label is why I'm requesting this
  pull; it fixes regression in debugging output in sysfs. Others are
  just bugfixes that should be safe.

  Everything has been in -next for while"

* tag 'leds-5.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: lm3532: add pointer to documentation and fix typo
  leds: rb532: cleanup whitespace
  ledtrig-pattern: fix email address quoting in MODULE_AUTHOR()
  led: max77650: add of_match table
  leds-as3645a: Drop fwnode reference on ignored node
  leds: gpio: Fix uninitialized gpio label for fwnode based probe

Merge tag 'hwmon-for-v5.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - In hwmon core, do not use the hwmon parent device for device managed
   memory allocations, since parent device lifetime may not match hwmon
   device lifetime.

 - Fix discrepancy between read and write values in adt7475 driver.

 - Fix alarms and voltage limits in nct7802 driver.

* tag 'hwmon-for-v5.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (core) Do not use device managed functions for memory allocations
  hwmon: (adt7475) Make volt2reg return same reg as reg2volt input
  hwmon: (nct7802) Fix non-working alarm on voltages
  hwmon: (nct7802) Fix voltage limits to wrong registers

Add pointer to datasheet and fix typo in printk message.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

Trivial cleanup removing empty line at wrong place.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

Apparently it is quite easy to forget ">" in quoting of email
address. This fixes it.

Signed-off-by: Pavel Machek <pavel@ucw.cz>

We need the of_match table if we want to use the compatible string in
the pmic's child node and get the led driver loaded automatically.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

If a node is ignored, do not get a reference to it. Fix the bug by moving
fwnode_handle_get() where a reference to an fwnode is saved for clarity.

Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

When switching to using generic LED name composition mechanism via
devm_led_classdev_register_ext() API the part of code initializing
struct gpio_led's template name property was removed alongside.
It was however overlooked that the property was also passed to
devm_fwnode_get_gpiod_from_child() in place of "label" parameter,
which when set to NULL, results in gpio label being initialized to '?'.

It could be observed in debugfs and failed to properly identify
gpio association with LED consumer.

Fix this shortcoming by updating the GPIO label after the LED is
registered and its final name is known.

Fixes: d7235f5f

 ("leds: gpio: Use generic support for composing LED names")
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
[fixed comment]
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Pull io_uring fix from Jens Axboe:
 "This was supposed to have gone in last week, but due to a brain fart
  on my part, I forgot that we made this struct addition in the 5.5
  cycle. So here it is for 5.5, to prevent having a 32 vs 64-bit
  compatability issue with the files_update command"

* tag 'io_uring-5.5-2020-01-22' of git://git.kernel.dk/linux-block:
  io_uring: fix compat for IORING_REGISTER_FILES_UPDATE

Commit 99c9a923 ("tracing/uprobe: Fix double perf_event
linking on multiprobe uprobe") moved trace_uprobe_filter on
trace_probe_event. However, since it introduced a flexible
data structure with char array and type casting, the
alignment of trace_uprobe_filter can be broken.

This changes the type of the array to trace_uprobe_filter
data strucure to fix it.

Link: http://lore.kernel.org/r/20200120124022.GA14897@hirez.programming.kicks-ass.net
Link: http://lkml.kernel.org/r/157966340499.5107.10978352478952144902.stgit@devnote2

Fixes: 99c9a923

 ("tracing/uprobe: Fix double perf_event linking on multiprobe uprobe")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

A load on an ESB page returning all 1's means that the underlying
device has invalidated the access to the PQ state of the interrupt
through mmio. It may happen, for example when querying a PHB interrupt
while the PHB is in an error state.

In that case, we should consider the interrupt to be invalid when
checking its state in the irq_get_irqchip_state() handler.

Fixes: da15c03b

 ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
[clg: wrote a commit log, introduced XIVE_ESB_INVALID ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200113130118.27969-1-clg@kaod.org

Let PPC_UV depend only on DEVICE_PRIVATE which in turn
will satisfy all the other required dependencies

Fixes: 013a53f2

 ("powerpc: Ultravisor: Add PPC_UV config option")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200109092047.24043-1-bharata@linux.ibm.com

Currently, we just assume that it will stick around by virtue of the
submitter's reference, but later patches will allow the syscall to
return early and we can't rely on that reference at that point.

While I'm not aware of any reports of it, Xiubo pointed out that this
may fix a use-after-free.  If the wait for a reply times out or is
canceled via signal, and then the reply comes in after the syscall
returns, the client can end up trying to access r_parent without a
reference.

Take an extra reference to the inode when setting r_parent and release
it when releasing the request.

Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

With the introduction of per-FD address space, the same BO can be mapped
in different address space if the BO is globally visible (GEM_FLINK)
and opened in different context or if the dmabuf is self-imported. The
current implementation does not take case into account, and attaches the
mapping directly to the panfrost_gem_object.

Let's create a panfrost_gem_mapping struct and allow multiple mappings
per BO.

The mappings are refcounted which helps solve another problem where
mappings were torn down (GEM handle closed by userspace) while GPU
jobs accessing those BOs were still in-flight. Jobs now keep a
reference on the mappings they use.

v2 (robh):
- Minor review comment clean-ups from Steven
- Use list_is_singular helper
- Just WARN if we add a mapping when madvise state is not WILLNEED.
  With that, drop the use of object_name_lock.

v3 (robh):
- Revert returning list iterator in panfrost_gem_mapping_get()

Fixes: a5efb4c9 ("drm/panfrost: Restructure the GEM object creation")
Fixes: 7282f764

 ("drm/panfrost: Implement per FD address spaces")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021554.15090-1-robh@kernel.org

In our ABI we have defined I915_ENGINE_CLASS_INVALID_NONE and
I915_ENGINE_CLASS_INVALID_VIRTUAL as negative values which creates
implicit coupling with type widths used in, also ABI, struct
i915_engine_class_instance.

One place where we export engine->uabi_class
I915_ENGINE_CLASS_INVALID_VIRTUAL is from our our tracepoints. Because the
type of the former is u8 in contrast to u16 defined in the ABI, 254 will
be returned instead of 65534 which userspace would legitimately expect.

Another place is I915_CONTEXT_PARAM_ENGINES.

Therefore we need to align the type used to store engine ABI class and
instance.

v2:
 * Update the commit message mentioning get_engines and cc stable.
   (Chris)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 6d06779e

 ("drm/i915: Load balancing across a virtual engine")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116134508.25211-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 0b3bd0cd

)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

If we create a rather large userptr object(e.g 1ULL << 32) we might
shift past the type-width of num_pages: (int)num_pages << PAGE_SHIFT,
resulting in a totally bogus sg_table, which fortunately will eventually
manifest as:

gen8_ppgtt_insert_huge:463 GEM_BUG_ON(iter->sg->length < page_size)
kernel BUG at drivers/gpu/drm/i915/gt/gen8_ppgtt.c:463!

v2: more unsigned long
    prefer I915_GTT_PAGE_SIZE

Fixes: 5cc9ed4b

 ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117132413.1170563-2-matthew.auld@intel.com
(cherry picked from commit 8e78871b

)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

fds field of struct io_uring_files_update is problematic with regards
to compat user space, as pointer size is different in 32-bit, 32-on-64-bit,
and 64-bit user space.  In order to avoid custom handling of compat in
the syscall implementation, make fds __u64 and use u64_to_user_ptr in
order to retrieve it.  Also, align the field naturally and check that
no garbage is passed there.

Fixes: c3a31e60

 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When trace_clock option is not set and unstable clcok detected,
tracing_set_default_clock() sets trace_clock(ThinkPad A285 is one of
case). In that case, if lockdown is in effect, null pointer
dereference error happens in ring_buffer_set_clock().

Link: http://lkml.kernel.org/r/20200116131236.3866925-1-masami256@gmail.com

Cc: stable@vger.kernel.org
Fixes: 17911ff3 ("tracing: Add locked_down checks to the open calls of files created for tracefs")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1788488


Signed-off-by: Masami Ichikawa <masami256@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

While working on a tool to convert SQL syntex into the histogram language of
the kernel, I discovered the following bug:

 # echo 'first u64 start_time u64 end_time pid_t pid u64 delta' >> synthetic_events
 # echo 'hist:keys=pid:start=common_timestamp' > events/sched/sched_waking/trigger
 # echo 'hist:keys=next_pid:delta=common_timestamp-$start,start2=$start:onmatch(sched.sched_waking).trace(first,$start2,common_timestamp,next_pid,$delta)' > events/sched/sched_switch/trigger

Would not display any histograms in the sched_switch histogram side.

But if I were to swap the location of

  "delta=common_timestamp-$start" with "start2=$start"

Such that the last line had:

 # echo 'hist:keys=next_pid:start2=$start,delta=common_timestamp-$start:onmatch(sched.sched_waking).trace(first,$start2,common_timestamp,next_pid,$delta)' > events/sched/sched_switch/trigger

The histogram works as expected.

What I found out is that the expressions clear out the value once it is
resolved. As the variables are resolved in the order listed, when
processing:

  delta=common_timestamp-$start

The $start is cleared. When it gets to "start2=$start", it errors out with
"unresolved symbol" (which is silent as this happens at the location of the
trace), and the histogram is dropped.

When processing the histogram for variable references, instead of adding a
new reference for a variable used twice, use the same reference. That way,
not only is it more efficient, but the order will no longer matter in
processing of the variables.

From Tom Zanussi:

 "Just to clarify some more about what the problem was is that without
  your patch, we would have two separate references to the same variable,
  and during resolve_var_refs(), they'd both want to be resolved
  separately, so in this case, since the first reference to start wasn't
  part of an expression, it wouldn't get the read-once flag set, so would
  be read normally, and then the second reference would do the read-once
  read and also be read but using read-once.  So everything worked and
  you didn't see a problem:

   from: start2=$start,delta=common_timestamp-$start

  In the second case, when you switched them around, the first reference
  would be resolved by doing the read-once, and following that the second
  reference would try to resolve and see that the variable had already
  been read, so failed as unset, which caused it to short-circuit out and
  not do the trigger action to generate the synthetic event:

   to: delta=common_timestamp-$start,start2=$start

  With your patch, we only have the single resolution which happens
  correctly the one time it's resolved, so this can't happen."

Link: https://lore.kernel.org/r/20200116154216.58ca08eb@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 067fe038

 ("tracing: Add variable reference handling to hist triggers")
Reviewed-by: Tom Zanuss <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull reiserfs fix from Jan Kara:
 "A fixup of a recently merged reiserfs fix which has caused problem
  when xattrs were not compiled in"

* tag 'fixes_for_v5.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: fix handling of -EOPNOTSUPP in reiserfs_for_each_xattr

For SDHCIv3+ with programmable clock mode, minimal clock frequency is
still base clock / max(divider). Minimal programmable clock frequency is
always greater than minimal divided clock frequency. Without this patch,
SDHCI uses out-of-spec initial frequency when multiplier is big enough:

mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz
[for 480 MHz source clock divided by 1024]

The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode.

Fixes: c3ed3877 ("mmc: sdhci: add support for programmable clock mode")
Cc: <stable@vger.kernel.org> # 4f6aa326

: mmc: tegra: Only advertise UHS modes if IO regulator is present
Cc: <stable@vger.kernel.org>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.pl


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>