Commit d5b90e99 ("devlink: report 0 after hitting end in region read")
fixed region dump, but region read still returns a spurious error:

$ devlink region read netdevsim/netdevsim1/dummy snapshot 0 addr 0 len 128
0000000000000000 a6 f4 c4 1c 21 35 95 a6 9d 34 c3 5b 87 5b 35 79
0000000000000010 f3 a0 d7 ee 4f 2f 82 7f c6 dd c4 f6 a5 c3 1b ae
0000000000000020 a4 fd c8 62 07 59 48 03 70 3b c7 09 86 88 7f 68
0000000000000030 6f 45 5d 6d 7d 0e 16 38 a9 d0 7a 4b 1e 1e 2e a6
0000000000000040 e6 1d ae 06 d6 18 00 85 ca 62 e8 7e 11 7e f6 0f
0000000000000050 79 7e f7 0f f3 94 68 bd e6 40 22 85 b6 be 6f b1
0000000000000060 af db ef 5e 34 f0 98 4b 62 9a e3 1b 8b 93 fc 17
devlink answers: Invalid argument
0000000000000070 61 e8 11 11 66 10 a5 f7 b1 ea 8d 40 60 53 ed 12

This is a minimal fix, I'll follow up with a restructuring
so we don't have two checks for the same condition.

Fixes: fdd41ec2

 ("devlink: Return right error code in case of errors for region read")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netvsc_start_xmit is used as a callback function for the ndo_start_xmit
function pointer. ndo_start_xmit's return type is netdev_tx_t but
netvsc_start_xmit's return type is int.

This causes a failure with Control Flow Integrity (CFI), which requires
function pointer prototypes and callback function definitions to match
exactly. When CFI is in enforcing, the kernel panics. When booting a
CFI kernel with WSL 2, the VM is immediately terminated because of this.

The splat when CONFIG_CFI_PERMISSIVE is used:

[    5.916765] CFI failure (target: netvsc_start_xmit+0x0/0x10):
[    5.916771] WARNING: CPU: 8 PID: 0 at kernel/cfi.c:29 __cfi_check_fail+0x2e/0x40
[    5.916772] Modules linked in:
[    5.916774] CPU: 8 PID: 0 Comm: swapper/8 Not tainted 5.7.0-rc3-next-20200424-microsoft-cbl-00001-ged4eb37d2c69-dirty #1
[    5.916776] RIP: 0010:__cfi_check_fail+0x2e/0x40
[    5.916777] Code: 48 c7 c7 70 98 63 a9 48 c7 c6 11 db 47 a9 e8 69 55 59 00 85 c0 75 02 5b c3 48 c7 c7 73 c6 43 a9 48 89 de 31 c0 e8 12 2d f0 ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 00 cc cc 00 00 85 f6 74 25
[    5.916778] RSP: 0018:ffffa803c0260b78 EFLAGS: 00010246
[    5.916779] RAX: 712a1af25779e900 RBX: ffffffffa8cf7950 RCX: ffffffffa962cf08
[    5.916779] RDX: ffffffffa9c36b60 RSI: 0000000000000082 RDI: ffffffffa9c36b5c
[    5.916780] RBP: ffff8ffc4779c2c0 R08: 0000000000000001 R09: ffffffffa9c3c300
[    5.916781] R10: 0000000000000151 R11: ffffffffa9c36b60 R12: ffff8ffe39084000
[    5.916782] R13: ffffffffa8cf7950 R14: ffffffffa8d12cb0 R15: ffff8ffe39320140
[    5.916784] FS:  0000000000000000(0000) GS:ffff8ffe3bc00000(0000) knlGS:0000000000000000
[    5.916785] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.916786] CR2: 00007ffef5749408 CR3: 00000002f4f5e000 CR4: 0000000000340ea0
[    5.916787] Call Trace:
[    5.916788]  <IRQ>
[    5.916790]  __cfi_check+0x3ab58/0x450e0
[    5.916793]  ? dev_hard_start_xmit+0x11f/0x160
[    5.916795]  ? sch_direct_xmit+0xf2/0x230
[    5.916796]  ? __dev_queue_xmit.llvm.11471227737707190958+0x69d/0x8e0
[    5.916797]  ? neigh_resolve_output+0xdf/0x220
[    5.916799]  ? neigh_connected_output.cfi_jt+0x8/0x8
[    5.916801]  ? ip6_finish_output2+0x398/0x4c0
[    5.916803]  ? nf_nat_ipv6_out+0x10/0xa0
[    5.916804]  ? nf_hook_slow+0x84/0x100
[    5.916807]  ? ip6_input_finish+0x8/0x8
[    5.916807]  ? ip6_output+0x6f/0x110
[    5.916808]  ? __ip6_local_out.cfi_jt+0x8/0x8
[    5.916810]  ? mld_sendpack+0x28e/0x330
[    5.916811]  ? ip_rt_bug+0x8/0x8
[    5.916813]  ? mld_ifc_timer_expire+0x2db/0x400
[    5.916814]  ? neigh_proxy_process+0x8/0x8
[    5.916816]  ? call_timer_fn+0x3d/0xd0
[    5.916817]  ? __run_timers+0x2a9/0x300
[    5.916819]  ? rcu_core_si+0x8/0x8
[    5.916820]  ? run_timer_softirq+0x14/0x30
[    5.916821]  ? __do_softirq+0x154/0x262
[    5.916822]  ? native_x2apic_icr_write+0x8/0x8
[    5.916824]  ? irq_exit+0xba/0xc0
[    5.916825]  ? hv_stimer0_vector_handler+0x99/0xe0
[    5.916826]  ? hv_stimer0_callback_vector+0xf/0x20
[    5.916826]  </IRQ>
[    5.916828]  ? hv_stimer_global_cleanup.cfi_jt+0x8/0x8
[    5.916829]  ? raw_setsockopt+0x8/0x8
[    5.916830]  ? default_idle+0xe/0x10
[    5.916832]  ? do_idle.llvm.10446269078108580492+0xb7/0x130
[    5.916833]  ? raw_setsockopt+0x8/0x8
[    5.916833]  ? cpu_startup_entry+0x15/0x20
[    5.916835]  ? cpu_hotplug_enable.cfi_jt+0x8/0x8
[    5.916836]  ? start_secondary+0x188/0x190
[    5.916837]  ? secondary_startup_64+0xa5/0xb0
[    5.916838] ---[ end trace f2683fa869597ba5 ]---

Avoid this by using the right return type for netvsc_start_xmit.

Fixes: fceaf24a ("Staging: hv: add the Hyper-V virtual network driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1009


Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dan Murphy says:

====================
WoL fixes for DP83822 and DP83tc811

The WoL feature for each device was enabled during boot or when the PHY was
brought up which may be undesired.  These patches disable the WoL in the
config_init.  The disabling and enabling of the WoL is now done though the
set_wol call.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The WoL feature should be disabled when config_init is called and the
feature should turned on or off  when set_wol is called.

In addition updated the calls to modify the registers to use the set_bit
and clear_bit function calls.

Fixes: 6d749428788b ("net: phy: DP83TC811: Introduce support for the
DP83TC811 phy")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The WoL feature should be disabled when config_init is called and the
feature should turned on or off  when set_wol is called.

In addition updated the calls to modify the registers to use the set_bit
and clear_bit function calls.

Fixes: 3b427751a9d0 ("net: phy: DP83822 initial driver submission")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nik reported a bug with pcpu dst cache when nexthop objects are
used illustrated by the following:
    $ ip netns add foo
    $ ip -netns foo li set lo up
    $ ip -netns foo addr add 2001:db8:11::1/128 dev lo
    $ ip netns exec foo sysctl net.ipv6.conf.all.forwarding=1
    $ ip li add veth1 type veth peer name veth2
    $ ip li set veth1 up
    $ ip addr add 2001:db8:10::1/64 dev veth1
    $ ip li set dev veth2 netns foo
    $ ip -netns foo li set veth2 up
    $ ip -netns foo addr add 2001:db8:10::2/64 dev veth2
    $ ip -6 nexthop add id 100 via 2001:db8:10::2 dev veth1
    $ ip -6 route add 2001:db8:11::1/128 nhid 100

    Create a pcpu entry on cpu 0:
    $ taskset -a -c 0 ip -6 route get 2001:db8:11::1

    Re-add the route entry:
    $ ip -6 ro del 2001:db8:11::1
    $ ip -6 route add 2001:db8:11::1/128 nhid 100

    Route get on cpu 0 returns the stale pcpu:
    $ taskset -a -c 0 ip -6 route get 2001:db8:11::1
    RTNETLINK answers: Network is unreachable

    While cpu 1 works:
    $ taskset -a -c 1 ip -6 route get 2001:db8:11::1
    2001:db8:11::1 from :: via 2001:db8:10::2 dev veth1 src 2001:db8:10::1 metric 1024 pref medium

Conversion of FIB entries to work with external nexthop objects
missed an important difference between IPv4 and IPv6 - how dst
entries are invalidated when the FIB changes. IPv4 has a per-network
namespace generation id (rt_genid) that is bumped on changes to the FIB.
Checking if a dst_entry is still valid means comparing rt_genid in the
rtable to the current value of rt_genid for the namespace.

IPv6 also has a per network namespace counter, fib6_sernum, but the
count is saved per fib6_node. With the per-node counter only dst_entries
based on fib entries under the node are invalidated when changes are
made to the routes - limiting the scope of invalidations. IPv6 uses a
reference in the rt6_info, 'from', to track the corresponding fib entry
used to create the dst_entry. When validating a dst_entry, the 'from'
is used to backtrack to the fib6_node and check the sernum of it to the
cookie passed to the dst_check operation.

With the inline format (nexthop definition inline with the fib6_info),
dst_entries cached in the fib6_nh have a 1:1 correlation between fib
entries, nexthop data and dst_entries. With external nexthops, IPv6
looks more like IPv4 which means multiple fib entries across disparate
fib6_nodes can all reference the same fib6_nh. That means validation
of dst_entries based on external nexthops needs to use the IPv4 format
- the per-network namespace counter.

Add sernum to rt6_info and set it when creating a pcpu dst entry. Update
rt6_get_cookie to return sernum if it is set and update dst_check for
IPv6 to look for sernum set and based the check on it if so. Finally,
rt6_get_pcpu_route needs to validate the cached entry before returning
a pcpu entry (similar to the rt_cache_valid calls in __mkroute_input and
__mkroute_output for IPv4).

This problem only affects routes using the new, external nexthops.

Thanks to the kbuild test robot for catching the IS_ENABLED needed
around rt_genid_ipv6 before I sent this out.

Fixes: 5b98324e

 ("ipv6: Allow routes to use nexthop objects")
Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Under heavy load, the EOTID termination FLOWC request fails to get
enqueued to the end of the Tx ring due to lack of credits. This
results in EOTID leak.

When disabling TC-MQPRIO offload, the link is already brought down
to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be
sent outside the wire, to make room for FLOWC request. Also, move the
FLOWC descriptor consumption logic closer to when the FLOWC request is
actually posted to hardware.

Fixes: 0e395b3c

 ("cxgb4: add FLOWC based QoS offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unfortunately sometimes ->probe() may fail. The commit b9663b7c
("net: stmmac: Enable SERDES power up/down sequence")
messed up with error handling and thus:

[   12.811311] ------------[ cut here ]------------
[   12.811993] kernel BUG at net/core/dev.c:9937!

Fix this by properly crafted error path.

Fixes: b9663b7c

 ("net: stmmac: Enable SERDES power up/down sequence")
Cc: Voon Weifeng <weifeng.voon@intel.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vregion helpers to get min and max priority depend on the correct
ordering of vchunks in the vregion list. However, the current code
always adds new chunk to the end of the list, no matter what the
priority is. Fix this by finding the correct place in the list and put
vchunk there.

Fixes: 22a67766

 ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC 6040 recommends propagating an ECT(1) mark from an outer tunnel header
to the inner header if that inner header is already marked as ECT(0). When
RFC 6040 decapsulation was implemented, this case of propagation was not
added. This simply appears to be an oversight, so let's fix that.

Fixes: eccc1bb8

 ("tunnel: drop packet if ECN present with not-ECT")
Reported-by: Bob Briscoe <ietf@bobbriscoe.net>
Reported-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit e6a41c23, while trying to fix an issue,

    ("net: macb: ensure interface is not suspended on at91rm9200")

introduced a refcounting regression, because in error case refcounter
must be balanced. Fix it by calling pm_runtime_put_noidle() in error case.

While here, fix the same mistake in other couple of places.

Fixes: e6a41c23

 ("net: macb: ensure interface is not suspended on at91rm9200")
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Should an irq requested with 'devm_request_irq' be released explicitly,
it should be done by 'devm_free_irq()', not 'free_irq()'.

Fixes: 6c821bd9

 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

MACsec decryption always occurs in a softirq context. Since
the FPU may not be usable in the softirq context, the call to
decrypt may be scheduled on the cryptd work queue. The cryptd
work queue does not provide ordering guarantees. Therefore,
preserving order requires masking out ASYNC implementations
of gcm(aes).

For instance, an Intel CPU with AES-NI makes available the
generic-gcm-aesni driver from the aesni_intel module to
implement gcm(aes). However, this implementation requires
the FPU, so it is not always available to use from a softirq
context, and will fallback to the cryptd work queue, which
does not preserve frame ordering. With this change, such a
system would select gcm_base(ctr(aes-aesni),ghash-generic).
While the aes-aesni implementation prefers to use the FPU, it
will fallback to the aes-asm implementation if unavailable.

By using a synchronous version of gcm(aes), the decryption
will complete before returning from crypto_aead_decrypt().
Therefore, the macsec_decrypt_done() callback will be called
before returning from macsec_decrypt(). Thus, the order of
calls to macsec_post_decrypt() for the frames is preserved.

While it's presumable that the pure AES-NI version of gcm(aes)
is more performant, the hybrid solution is capable of gigabit
speeds on modest hardware. Regardless, preserving the order
of frames is paramount for many network protocols (e.g.,
triggering TCP retries). Within the MACsec driver itself, the
replay protection is tripped by the out-of-order frames, and
can cause frames to be dropped.

This bug has been present in this code since it was added in
v4.6, however it may not have been noticed since not all CPUs
have FPU offload available. Additionally, the bug manifests
as occasional out-of-order packets that are easily
misattributed to other network phenomena.

When this code was added in v4.6, the crypto/gcm.c code did
not restrict selection of the ghash function based on the
ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would
select the ghash-clmulni driver instead of ghash-generic,
which submits to the cryptd work queue if the FPU is busy.
However, this bug was was corrected in v4.8 by commit
b30bdfa8

, and was backported
all the way back to the v3.14 stable branch, so this patch
should be applicable back to the v4.6 stable branch.

Signed-off-by: Scott Dial <scott@scottdial.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Do not update the UDP checksum when it's zero, from Guillaume Nault.

2) Fix return of local variable in nf_osf, from Arnd Bergmann.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: three bug fixes

This series fixes three bugs in the Qualcomm IPA code.  The third
adds a missing error code initialization step.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Zero the result code stored in a field of the scratch 0 register
before issuing a generic EE command.  This just guarantees that
the value we read later was actually written as a result of the
command.

Also add the definitions of two more possible result codes that can
be returned when issuing flow control enable or disable commands:
  INCORRECT_CHANNEL_STATE: - channel must be in started state
  INCORRECT_DIRECTION - flow control is only valid for TX channels

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

An error message about limiting the number of TREs used prints the
wrong value.  Fix this bug.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ipa_endpoint_stop(), for TX endpoints we set the number of retries
to 0.  When we break out of the loop, retries being 0 means we return
EIO rather than the value of ret (which should be 0).

Fix this by using a non-zero retry count for both RX and TX
channels, and just break out of the loop after calling
gsi_channel_stop() for TX channels.  This way only RX channels
will retry, and the retry count will be non-zero at the end
for TX channels (so the proper value gets returned).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: fw upgrade bug fixes

These patches address issues found in additional internal
fw-upgrade testing.

v2:
 - replaced extra state flag with postponing first link check
 - added device reset patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Doing a device reset addresses an obscure FW timing issue in
the FW upgrade process.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure we can report the new FW version after a
fw-upgrade has finished by re-reading the device's
fw version information.

Fixes: c672412f

 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't bother with the link check during probe, let
the watchdog notice the first link-up.  This allows
probe to finish cleanly without any interruptions
from over excited user programs opening the device
as soon as it is registered.

Fixes: c672412f

 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

In this code, it appears that phyter_clocks is a list head, based on
the previous list_for_each, and that clock->list is intended to be a
list element, given that it has just been initialized in
dp83640_clock_init.  Accordingly, switch the arguments to
list_add_tail, which takes the list head as the second argument.

Fixes: cb646e2b

 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

User space can request to delete a range of VLANs from a bridge slave in
one netlink request. For each deleted VLAN the FDB needs to be traversed
in order to flush all the affected entries.

If a large range of VLANs is deleted and the number of FDB entries is
large or the FDB lock is contented, it is possible for the kernel to
loop through the deleted VLANs for a long time. In case preemption is
disabled, this can result in a soft lockup.

Fix this by adding a schedule point after each VLAN is deleted to yield
the CPU, if needed. This is safe because the VLANs are traversed in
process context.

Fixes: bdced7ef

 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Tested-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During MTU change, the following events may happen.
Client-driven CRQ initialization fails due to partner’s CRQ closed,
causing client to enqueue a reset task for FATAL_ERROR. Then passive
(server-driven) CRQ initialization succeeds, causing client to
release CRQ and enqueue a reset task for failover. If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.

Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails.

Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2020-04-29

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

v2:
 - Dropped the ktls patch, Tariq has to check if it is fixable in the stack

For -stable v4.12
 ('net/mlx5: Fix forced completion access non initialized command entry')
 ('net/mlx5: Fix command entry leak in Internal Error State')

For -stable v5.4
 ('net/mlx5: DR, On creation set CQ's arm_db member to right value')

For -stable v5.6
 ('net/mlx5e: Fix q counters on uplink representors')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_v{4,6}_syn_recv_sock() set 'own_req' only when returning
a not NULL 'child', let's check 'own_req' only if child is
available to avoid an - unharmful - UBSAN splat.

v1 -> v2:
 - reference the correct hash

Fixes: 4c8941de

 ("mptcp: avoid flipping mp_capable field in syn_recv_sock()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
mptcp: fix incoming options parsing

This series addresses a serious issue in MPTCP option parsing.

This is bigger than the usual -net change, but I was unable to find a
working, sane, smaller fix.

The core change is inside patch 2/5 which moved MPTCP options parsing from
the TCP code inside existing MPTCP hooks and clean MPTCP options status on
each processed packet.

The patch 1/5 is a needed pre-requisite, and patches 3,4,5 are smaller,
related fixes.

v1 -> v2:
 - cleaned-up patch 1/5
 - rebased on top of current -net
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

When parsing MPC+data packets we set the dss field, so
we must also initialize the data_fin, or we can find stray
value there.

Fixes: 9a19371b

 ("mptcp: fix data_fin handing in RX path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mentioned RX option field is initialized only for DSS
packet, we must access it only if 'dss' is set too, or
the subflow will end-up in a bad status, leading to
RFC violations.

Fixes: d22f4988

 ("mptcp: process MP_CAPABLE data option")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzcaller has found a way to trigger the WARN_ON_ONCE condition
in check_fully_established().

The root cause is a legit fallback to TCP scenario, so replace
the WARN with a plain message on a more strict condition.

Fixes: f296234c

 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mptcp_options_received structure carries several per
packet flags (mp_capable, mp_join, etc.). Such fields must
be cleared on each packet, even on dropped ones or packet
not carrying any MPTCP options, but the current mptcp
code clears them only on TCP option reset.

On several races/corner cases we end-up with stray bits in
incoming options, leading to WARN_ON splats. e.g.:

[  171.164906] Bad mapping: ssn=32714 map_seq=1 map_data_len=32713
[  171.165006] WARNING: CPU: 1 PID: 5026 at net/mptcp/subflow.c:533 warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531)
[  171.167632] Modules linked in: ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel geneve ip6_udp_tunnel udp_tunnel macsec macvtap tap ipvlan macvlan 8021q garp mrp xfrm_interface veth netdevsim nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun binfmt_misc intel_rapl_msr intel_rapl_common rfkill kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel joydev virtio_balloon pcspkr i2c_piix4 sunrpc ip_tables xfs libcrc32c crc32c_intel serio_raw virtio_console ata_generic virtio_blk virtio_net net_failover failover ata_piix libata
[  171.199464] CPU: 1 PID: 5026 Comm: repro Not tainted 5.7.0-rc1.mptcp_f227fdf5d388+ #95
[  171.200886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[  171.202546] RIP: 0010:warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531)
[  171.206537] Code: c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 1d 8b 55 3c 44 89 e6 48 c7 c7 20 51 13 95 e8 37 8b 22 fe <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 89 4c 24 04 e8 db d6 94 fe 8b 4c
[  171.220473] RSP: 0018:ffffc90000150560 EFLAGS: 00010282
[  171.221639] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  171.223108] RDX: 0000000000000000 RSI: 0000000000000008 RDI: fffff5200002a09e
[  171.224388] RBP: ffff8880aa6e3c00 R08: 0000000000000001 R09: fffffbfff2ec9955
[  171.225706] R10: ffffffff9764caa7 R11: fffffbfff2ec9954 R12: 0000000000007fca
[  171.227211] R13: ffff8881066f4a7f R14: ffff8880aa6e3c00 R15: 0000000000000020
[  171.228460] FS:  00007f8623719740(0000) GS:ffff88810be00000(0000) knlGS:0000000000000000
[  171.230065] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  171.231303] CR2: 00007ffdab190a50 CR3: 00000001038ea006 CR4: 0000000000160ee0
[  171.232586] Call Trace:
[  171.233109]  <IRQ>
[  171.233531] get_mapping_status (linux-mptcp/net/mptcp/subflow.c:691)
[  171.234371] mptcp_subflow_data_available (linux-mptcp/net/mptcp/subflow.c:736 linux-mptcp/net/mptcp/subflow.c:832)
[  171.238181] subflow_state_change (linux-mptcp/net/mptcp/subflow.c:1085 (discriminator 1))
[  171.239066] tcp_fin (linux-mptcp/net/ipv4/tcp_input.c:4217)
[  171.240123] tcp_data_queue (linux-mptcp/./include/linux/compiler.h:199 linux-mptcp/net/ipv4/tcp_input.c:4822)
[  171.245083] tcp_rcv_established (linux-mptcp/./include/linux/skbuff.h:1785 linux-mptcp/./include/net/tcp.h:1774 linux-mptcp/./include/net/tcp.h:1847 linux-mptcp/net/ipv4/tcp_input.c:5238 linux-mptcp/net/ipv4/tcp_input.c:5730)
[  171.254089] tcp_v4_rcv (linux-mptcp/./include/linux/spinlock.h:393 linux-mptcp/net/ipv4/tcp_ipv4.c:2009)
[  171.258969] ip_protocol_deliver_rcu (linux-mptcp/net/ipv4/ip_input.c:204 (discriminator 1))
[  171.260214] ip_local_deliver_finish (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/ipv4/ip_input.c:232)
[  171.261389] ip_local_deliver (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:252)
[  171.265884] ip_rcv (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:539)
[  171.273666] process_backlog (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/core/dev.c:6135)
[  171.275328] net_rx_action (linux-mptcp/net/core/dev.c:6572 linux-mptcp/net/core/dev.c:6640)
[  171.280472] __do_softirq (linux-mptcp/./arch/x86/include/asm/jump_label.h:25 linux-mptcp/./include/linux/jump_label.h:200 linux-mptcp/./include/trace/events/irq.h:142 linux-mptcp/kernel/softirq.c:293)
[  171.281379] do_softirq_own_stack (linux-mptcp/arch/x86/entry/entry_64.S:1083)
[  171.282358]  </IRQ>

We could address the issue clearing explicitly the relevant fields
in several places - tcp_parse_option, tcp_fast_parse_options,
possibly others.

Instead we move the MPTCP option parsing into the already existing
mptcp ingress hook, so that we need to clear the fields in a single
place.

This allows us dropping an MPTCP hook from the TCP code and
removing the quite large mptcp_options_received from the tcp_sock
struct. On the flip side, the MPTCP sockets will traverse the
option space twice (in tcp_parse_option() and in
mptcp_incoming_options(). That looks acceptable: we already
do that for syn and 3rd ack packets, plain TCP socket will
benefit from it, and even MPTCP sockets will experience better
code locality, reducing the jumps between TCP and MPTCP code.

v1 -> v2:
 - rebased on current '-net' tree

Fixes: 648ef4b8

 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the MPTCP code uses 2 hooks to process syn-ack
packets, mptcp_rcv_synsent() and the sk_rx_dst_set()
callback.

We can drop the first, moving the relevant code into the
latter, reducing the hooking into the TCP code. This is
also needed by the next patch.

v1 -> v2:
 - use local tcp sock ptr instead of casting the sk variable
   several times - DaveM

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Need to allocate the q counters before init_rx which needs them
when creating the rq.

Fixes: 8520fa57

 ("net/mlx5e: Create q counters on uplink representors")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Processing commands by cmd_work_handler() while already in Internal
Error State will result in entry leak, since the handler process force
completion without doorbell. Forced completion doesn't release the entry
and event completion will never arrive, so entry should be released.

Fixes: 73dd3a48

 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

mlx5_cmd_flush() will trigger forced completions to all valid command
entries. Triggered by an asynch event such as fast teardown it can
happen at any stage of the command, including command initialization.
It will trigger forced completion and that can lead to completion on an
uninitialized command entry.

Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is
initialized will ensure force completion is treated only if command
entry is initialized.

Fixes: 73dd3a48

 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In polling mode, set arm_db member to a value that will avoid CQ
event recovery by the HW.
Otherwise we might get event without completion function.
In addition,empty completion function to was added to protect from
unexpected events.

Fixes: 297ccceb

 ("net/mlx5: DR, Expose an internal API to issue RDMA operations")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

In cited patch mutex is initialized after its used.
Below call trace is observed.
Fix the order to initialize the mutex early enough.
Similarly follow mirror sequence during cleanup.

kernel: DEBUG_LOCKS_WARN_ON(lock->magic != lock)
kernel: WARNING: CPU: 5 PID: 45916 at kernel/locking/mutex.c:938
__mutex_lock+0x7d6/0x8a0
kernel: Call Trace:
kernel: ? esw_vport_tbl_get+0x3b/0x250 [mlx5_core]
kernel: ? mark_held_locks+0x55/0x70
kernel: ? __slab_free+0x274/0x400
kernel: ? lockdep_hardirqs_on+0x140/0x1d0
kernel: esw_vport_tbl_get+0x3b/0x250 [mlx5_core]
kernel: ? mlx5_esw_chains_create_fdb_prio+0xa57/0xc20 [mlx5_core]
kernel: mlx5_esw_vport_tbl_get+0x88/0xf0 [mlx5_core]
kernel: mlx5_esw_chains_create+0x2f3/0x3e0 [mlx5_core]
kernel: esw_create_offloads_fdb_tables+0x11d/0x580 [mlx5_core]
kernel: esw_offloads_enable+0x26d/0x540 [mlx5_core]
kernel: mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core]
kernel: mlx5_devlink_eswitch_mode_set+0x1af/0x320 [mlx5_core]
kernel: devlink_nl_cmd_eswitch_set_doit+0x41/0xb0

Fixes: 96e32687

 ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When mlx5_modify_header_alloc() fails, instead of printing the error
value returned, current error log prints 0.

Fix by printing correct error value returned by
mlx5_modify_header_alloc().

Fixes: 6724e66b

 ("net/mlx5: E-Switch, Get reg_c1 value on miss")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Error unwinding is done incorrectly in the cited commit.
When steering init fails, there is no need to perform steering cleanup.
When vport error exists, error cleanup should be mirror of the setup
routine, i.e. to perform steering cleanup before metadata cleanup.

This avoids the call trace in accessing uninitialized objects which are
skipped during steering_init() due to failure in steering_init().

Call trace:
mlx5_cmd_modify_header_alloc:805:(pid 21128): too many modify header
actions 1, max supported 0
E-Switch: Failed to create restore mod header

BUG: kernel NULL pointer dereference, address: 00000000000000d0
[  677.263079]  mlx5_destroy_flow_group+0x13/0x80 [mlx5_core]
[  677.268921]  esw_offloads_steering_cleanup+0x51/0xf0 [mlx5_core]
[  677.275281]  esw_offloads_enable+0x1a5/0x800 [mlx5_core]
[  677.280949]  mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core]
[  677.287227]  mlx5_devlink_eswitch_mode_set+0x1af/0x320
[  677.293741]  devlink_nl_cmd_eswitch_set_doit+0x41/0xb0
[  677.299217]  genl_rcv_msg+0x1eb/0x430

Fixes: 7983a675

 ("net/mlx5: E-Switch, Enable chains only if regs loopback is enabled")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>