- May 17, 2011
-
-
Ben Hutchings authored
This option appears to have been broken by commit 8313aca3 ('sfc: Allocate each channel separately, along with its RX and TX queues'). Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com>
-
- May 14, 2011
-
-
Ben Hutchings authored
ethtool_ops::set_rx_ntuple is supposed to return 0 on success, but it currently returns the filter ID when it inserts or modifies a filter. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com>
-
David S. Miller authored
At this point iph->daddr equals what rt->rt_dst would hold. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Pass in the sk_buff so that we can fetch the necessary keys from the packet header when working with input routes. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This will allow ip_options_build() to reliably look at the values of iph->{daddr,saddr} Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This code block executes when opt->srr_is_hit is set. It will be set only by ip_options_rcv_srr(). ip_options_rcv_srr() walks until it hits a matching nexthop in the SRR option addresses, and when it matches one 1) looks up the route for that nexthop and 2) on route lookup success it writes that nexthop value into iph->daddr. ip_forward_options() runs later, and again walks the SRR option addresses looking for the option matching the destination of the route stored in skb_rtable(). This route will be the same exact one looked up for the nexthop by ip_options_rcv_srr(). Therefore "rt->rt_dst == iph->daddr" must be true. All it really needs to do is record the route's source address in the matching SRR option adddress. It need not write iph->daddr again, since that has already been done by ip_options_rcv_srr() as detailed above. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
->read_proc interface is going away, switch to seq_file. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peter Pan(潘卫平) authored
In commit 1c5cae81 (net: call dev_alloc_name from register_netdevice), a bug of bonding was involved, see example 1 and 2. In register_netdevice(), the name of net_device is not valid until dev_get_valid_name() is called. But dev->netdev_ops->ndo_init(that is bond_init) is called before dev_get_valid_name(), and it uses the invalid name of net_device. I think register_netdevice() should make sure that the name of net_device is valid before calling ndo_init(). example 1: modprobe bonding ls /proc/net/bonding/bond%d ps -eLf root 3398 2 3398 0 1 21:34 ? 00:00:00 [bond%d] example 2: modprobe bonding max_bonds=3 [ 170.100292] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 170.101090] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. [ 170.102469] ------------[ cut here ]------------ [ 170.103150] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157() [ 170.104075] Hardware name: VirtualBox [ 170.105065] proc_dir_entry 'bonding/bond%d' already registered [ 170.105613] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding] [ 170.108397] Pid: 3457, comm: modprobe Not tainted 2.6.39-rc2+ #14 [ 170.108935] Call Trace: [ 170.109382] [<c0438f3b>] warn_slowpath_common+0x6a/0x7f [ 170.109911] [<c051a42a>] ? proc_register+0x126/0x157 [ 170.110329] [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f [ 170.110846] [<c051a42a>] proc_register+0x126/0x157 [ 170.111870] [<c051a4dd>] proc_create_data+0x82/0x98 [ 170.112335] [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding] [ 170.112905] [<f94dd806>] bond_init+0x77/0xa5 [bonding] [ 170.113319] [<c0721ac6>] register_netdevice+0x8c/0x1d3 [ 170.113848] [<f94e0e30>] bond_create+0x6c/0x90 [bonding] [ 170.114322] [<f94f4763>] bonding_init+0x763/0x7b1 [bonding] [ 170.114879] [<c0401240>] do_one_initcall+0x76/0x122 [ 170.115317] [<f94f4000>] ? 0xf94f3fff [ 170.115799] [<c0463f1e>] sys_init_module+0x1286/0x140d [ 170.116879] [<c07c6d9f>] sysenter_do_call+0x12/0x28 [ 170.117404] ---[ end trace 64e4fac3ae5fff1a ]--- [ 170.117924] bond%d: Warning: failed to register to debugfs [ 170.128728] ------------[ cut here ]------------ [ 170.129360] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157() [ 170.130323] Hardware name: VirtualBox [ 170.130797] proc_dir_entry 'bonding/bond%d' already registered [ 170.131315] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding] [ 170.133731] Pid: 3457, comm: modprobe Tainted: G W 2.6.39-rc2+ #14 [ 170.134308] Call Trace: [ 170.134743] [<c0438f3b>] warn_slowpath_common+0x6a/0x7f [ 170.135305] [<c051a42a>] ? proc_register+0x126/0x157 [ 170.135820] [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f [ 170.137168] [<c051a42a>] proc_register+0x126/0x157 [ 170.137700] [<c051a4dd>] proc_create_data+0x82/0x98 [ 170.138174] [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding] [ 170.138745] [<f94dd806>] bond_init+0x77/0xa5 [bonding] [ 170.139278] [<c0721ac6>] register_netdevice+0x8c/0x1d3 [ 170.139828] [<f94e0e30>] bond_create+0x6c/0x90 [bonding] [ 170.140361] [<f94f4763>] bonding_init+0x763/0x7b1 [bonding] [ 170.140927] [<c0401240>] do_one_initcall+0x76/0x122 [ 170.141494] [<f94f4000>] ? 0xf94f3fff [ 170.141975] [<c0463f1e>] sys_init_module+0x1286/0x140d [ 170.142463] [<c07c6d9f>] sysenter_do_call+0x12/0x28 [ 170.142974] ---[ end trace 64e4fac3ae5fff1b ]--- [ 170.144949] bond%d: Warning: failed to register to debugfs Signed-off-by:
Weiping Pan <panweiping3@gmail.com> Reviewed-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This patch fixes a bug in the set_pauseparam function that didn't well manage the ANE field and returned broken values when use ethtool -A|-a. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Decotigny authored
The driver used to call phy's ethtool configuration routine to start auto-negotiation. This change has it call directly phy's routine to start auto-negotiation. The initial version was hiding phy_start_aneg() return value, this patch returns it (<0 upon error). Tested: module compiles, tested on STM HDK7108 STB. Signed-off-by:
David Decotigny <decot@google.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
The file st5481_init.c locally defines and initializes the adapter_list variable, but does not use it for anything. Removing the list makes it possible to remove the list field from the st5481_adapter data structure. In the function probe_st5481, it also makes it possible to free the locally allocated adapter value on an error exit. Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasiliy Kulikov authored
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages without any special privileges. In other words, the patch makes it possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In order not to increase the kernel's attack surface, the new functionality is disabled by default, but is enabled at bootup by supporting Linux distributions, optionally with restriction to a group or a group range (see below). Similar functionality is implemented in Mac OS X: http://www.manpagez.com/man/4/icmp/ A new ping socket is created with socket(PF_INET, SOCK_DGRAM, PROT_ICMP) Message identifiers (octets 4-5 of ICMP header) are interpreted as local ports. Addresses are stored in struct sockaddr_in. No port numbers are reserved for privileged processes, port 0 is reserved for API ("let the kernel pick a free number"). There is no notion of remote ports, remote port numbers provided by the user (e.g. in connect()) are ignored. Data sent and received include ICMP headers. This is deliberate to: 1) Avoid the need to transport headers values like sequence numbers by other means. 2) Make it easier to port existing programs using raw sockets. ICMP headers given to send() are checked and sanitized. The type must be ICMP_ECHO and the code must be zero (future extensions might relax this, see below). The id is set to the number (local port) of the socket, the checksum is always recomputed. ICMP reply packets received from the network are demultiplexed according to their id's, and are returned by recv() without any modifications. IP header information and ICMP errors of those packets may be obtained via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source quenches and redirects are reported as fake errors via the error queue (IP_RECVERR); the next hop address for redirects is saved to ee_info (in network order). socket(2) is restricted to the group range specified in "/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning that nobody (not even root) may create ping sockets. Setting it to "100 100" would grant permissions to the single group (to either make /sbin/ping g+s and owned by this group or to grant permissions to the "netadmins" group), "0 4294967295" would enable it for the world, "100 4294967295" would enable it for the users, but not daemons. The existing code might be (in the unlikely case anyone needs it) extended rather easily to handle other similar pairs of ICMP messages (Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply etc.). Userspace ping util & patch for it: http://openwall.info/wiki/people/segoon/ping For Openwall GNU/*/Linux it was the last step on the road to the setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels) is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs: http://mirrors.kernel.org/openwall/Owl/current/iso/ Initially this functionality was written by Pavel Kankovsky for Linux 2.4.32, but unfortunately it was never made public. All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with the patch. PATCH v3: - switched to flowi4. - minor changes to be consistent with raw sockets code. PATCH v2: - changed ping_debug() to pr_debug(). - removed CONFIG_IP_PING. - removed ping_seq_fops.owner field (unused for procfs). - switched to proc_net_fops_create(). - switched to %pK in seq_printf(). PATCH v1: - fixed checksumming bug. - CAP_NET_RAW may not create icmp sockets anymore. RFC v2: - minor cleanups. - introduced sysctl'able group range to restrict socket(2). Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
KOSAKI Motohiro authored
Adapt new API. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
-Wunused-but-set-variable generates compile warnings. The affected variables are removed. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
-Wunused-but-set-variable generates a compile warning. The affected variable is removed. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
-Wunused-but-set-variable generates compile warnings. The affected variables are removed. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
-Wunused-but-set-variable generates a compile warning for lcs' tasklet function. Invoked functions contain already error handling; thus additional return code checking is not needed here. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
Remove unused return code handling. The claw driver is mostly dead, so just make sure it keeps compiling without warnings. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sebastian Ott authored
Fill in the owner of qeth's ccw device driver. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Frank Blaschka authored
This patch improves FFDC (first failure data capture) by requesting a hardware trace in case the device driver, the hardware or a user detects an error. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Frank Blaschka authored
Set rx csum default to hw checksumming again. Remove sysfs interface for rx csum (checksumming) and TSO (large_send). With the new hw_features it does not work to keep the old sysfs interface in parallel. Convert options.checksum_type to new hw_features. Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anirban Chakraborty authored
Update driver version number Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anirban Chakraborty authored
Driver checks if the previous dump has been cleared before taking the dump. It doesn't take the dump if it is not cleared. Changes from v2: Added lock to protect dump data structures from being mangled while dumping or setting them via ethtool. Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anirban Chakraborty authored
Added code to take FW dump. o Driver queries FW at the init time and gets the dump template o It takes FW dump as per the dump template o Level of FW dump (and its size) is configured via dump flag Signed-off-by:
Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Sending mbox cmds require multiple steps of writing to the DB register and polling for an ack. Gettting interrupted in the middle by a signal breaks the mbox protocol. Use msleep() to not get interrupted. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
If waiting on POST returns prematurely (due to a signal), abort polling and return an error. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Anirban Chakraborty authored
Added code to take FW dump via ethtool. Dump level can be controlled via setting the dump flag. A get function is provided to query the current setting of the dump flag. Dump data is obtained from the driver via a separate get function. Changes from v3: Fixed buffer length issue in ethtool_get_dump_data function. Updated kernel doc for ethtool_dump struct and get_dump_flag function. Changes from v2: Provided separate commands for get flag and data. Check for minimum of the two buffer length obtained via ethtool and driver and use that for dump buffer Pass up the driver return error codes up to the caller. Added kernel doc comments. Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Reviewed-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Save a bit of space. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 13, 2011
-
-
David S. Miller authored
I swear none of my compilers warned about this, yet it is so obvious. > net/ipv4/ip_forward.c: In function 'ip_forward': > net/ipv4/ip_forward.c:87: warning: 'iph' may be used uninitialized in this function Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
David S. Miller authored
No matter what kind of header mangling occurs due to IP options processing, rt->rt_dst will always equal iph->daddr in the packet. So we can safely use iph->daddr instead of rt->rt_dst here. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We already copy the 4-byte nexthop from the options block into local variable "nexthop" for the route lookup. Re-use that variable instead of memcpy()'ing again when assigning to iph->daddr after the route lookup succeeds. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
All call sites conditionalize the call to ip_options_rcv_srr() with a check of opt->srr, so no need to check it again there. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
It will be needed by bonding and other drivers changing vlan_features after ndo_init callback. As a bonus, this includes kernel-doc for netdev_update_features(). Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexey Orishko authored
Changes: - while making NTB, driver shall check if device dwNtbOutMaxSize is higher than host value and shall add a short packet if this is the case - previous temporary patch for this issue is replaced by this one Signed-off-by:
Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Remove all remaining references to rt->rt_{src,dst} by using dest->dst_saddr to cache saddr (used for TUN mode). For ICMP in FORWARD hook just restrict the rt_mode for NAT to disable LOCALNODE. All other modes do not allow IP_VS_RT_MODE_RDR, so we should be safe with the ICMP forwarding. Using cp->daddr as replacement for rt_dst is safe for all modes except BYPASS, even when cp->dest is NULL because it is cp->daddr that is used to assign cp->dest for sync-ed connections. Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We can simply track what destination address is used based upon which code block is taken at the top of the function. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
[ Add some cases I missed, from Julian Anastasov ] Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
This patch adds tg3_set_features() to handle loopback mode. Currently the capability is added for the devices which support internal MAC loopback mode. So when enabled, it enables internal-MAC loopback. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-