Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below.  Move the variables and functions above
board_prom_init.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1077/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This is needed for the fix of the M3 workaround.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Previously it was unconditionally used on all Sibyte family SOCs.  The
M3 bug has to be handled in the TLB exception handler which is extremly
performance sensitive, so this modification is expected to deliver around
2-3% performance improvment.  This is important as required changes to the
M3 workaround will make it more costly.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

To avoid a glitch during GPIO initialisation read GPIO output register
values left by the firmware.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/903/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1017/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix typo: CONFIG_BCMCPU_IS_63xx does not exist;
CONFIG_BCM63XX_CPU_63xx is the valid config option.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/901/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The BCm63xx SOC has two uarts.  Some boards use the second one for
bluetooth.  This patch changes platform device registration code to
handle this.  Changes to the UART driver were already merged in
6a2c7eab.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/900/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

bcm63xx_gpio_init is already called from prom_init to allow board to use
them early, so we can remove the unneeded arch_initcall.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/899/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The DWVS0 board is a BCM6358-based board with an on-board OHCI controler.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1015/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1014/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The number of GPIOs on BCM6338 is 8, while BCM6345 has only 16 GPIOs
available.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1016/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/lib/libgcc.h:21: ERROR: open brace '{' following union go on the same line

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
To: linux-kernel@vger.kernel.org
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-mips@linux-mips.org
Cc: linux-sh@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1007/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

As per chapter 15 "Errata: Issue of Out-of-order in loongson"[1] to work
around the Loongson 2F erratum we need to do:

"When switching from user mode to kernel mode, you should flush the
branch target history such as BTB and RAS."

[1] Chinese version: http://www.loongson.cn/uploadfile/file/200808211
[2] English version of chapter 15:
    http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source



Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Patchwork: http://patchwork.linux-mips.org/patch/1066/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This is a follow on to the vdso patch.

Since all processes now have signal trampolines permanently mapped, we
can use those instead of putting the trampoline on the stack and
invalidating the corresponding icache across all CPUs.  We also get rid
of a bunch of ICACHE_REFILLS_WORKAROUND_WAR code.

[Ralf: GDB 7.1 which has the necessary modifications to allow backtracing
over signal frames will supposedly be released tomorrow.  The old signal
frame format obsoleted by this patch exists in two variations, for sane
processors and for those requiring ICACHE_REFILLS_WORKAROUND_WAR.  So
there was never a GDB which did support backtracing over signal frames
on all MIPS systems.  This convinved me this series should be applied and
pushed upstream as soon as possible.]

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/974/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This is a preliminary patch to add a vdso to all user processes.  Still
missing are ELF headers and .eh_frame information.  But it is enough to
allow us to move signal trampolines off of the stack.  Note that emulation
of branch delay slots in the FPU emulator still requires the stack.

We allocate a single page (the vdso) and write all possible signal
trampolines into it.  The stack is moved down by one page and the vdso is
mapped into this space.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/975/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/976/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The SSB PCIcore code reused the IO resource fixup code from the original
2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack
for doing PCI IO resource configuration back then (the boot loader
doesn't configure PCI devices on this platform).

However, this code is no longer necessary since the kernel now can do
PCI resource management fine all by itself, so remove the old code.

When removing the code, it becomes obvious that the mem_offset setting
in the PCIcore driver was wrong, however this was masked by the fixup
code before, except in a few cases involving yenta_socket. For BCM47xx,
the correct offset is 0, and since this is the only device using PCIcore
in host mode, the offset can simply be removed unconditionally.

Signed-off-by: Andreas Ferber <af@chaos-agency.de>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Markus Wigge <markus@cultcom.de>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1070/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On AR7, we already redefine PHYS_OFFSET to match the system specifities, it
is however not sufficient when unsing dma_{map,unmap}_single, specifically
in the ethernet driver, we must also adjust CAC_ADDR and UNCAC_ADDR for DMA
to work correctly. This patch fixes the following issue, seen in cpmac_open:

ops[#1]:
Cpu 0
$ 0   : 00000000 10008400 a0f5b120 00000000
$ 4   : 94c59000 94270f64 00000020 00000010
$ 8   : 00000010 94103ce0 0000000a 94c03400
$12   : ffffffff 94c03408 94c03410 00000001
$16   : a0f5ba20 00000041 94c592c0 94c59200
$20   : 94c59000 000005ee 00002000 9438c8f0
$24   : 00000010 00000000
$28   : 94fac000 94fadd58 94390000 942724a8
Hi    : 00000000
Lo    : 00000001
epc   : 94272518 cpmac_open+0x208/0x3f8
    Not tainted
ra    : 942724a8 cpmac_open+0x198/0x3f8
Status: 10008403    KERNEL EXL IE
Cause : 3080000c
BadVA : 00000000
PrId  : 00018448 (MIPS 4KEc)
Modules linked in:
Process ifconfig (pid: 278, threadinfo=94fac000, task=94e79590, tls=00000000)
Stack : 7f8da120 2ab05cb0 94c59000 943356f0 00000000 943d0000 94c59000 943356f0
        94c59030 943d0000 943c27c0 94fade10 00000000 94fade20 94c59000 9428e5a4
        00000000 94c59000 00000041 94289768 94c59000 00000041 00001002 00001043
        00000000 9428d810 00000000 94fade10 7f8da4e8 9428e6b8 00000000 7f8da4a8
        7f8da4e8 00008914 00000000 942f7f2c 00000000 00000008 00408000 00008913
        ...
Call Trace:
[<94272518>] cpmac_open+0x208/0x3f8
[<9428e5a4>] dev_open+0x164/0x264
[<9428d810>] dev_change_flags+0xd0/0x1bc
[<942f7f2c>] devinet_ioctl+0x2d8/0x908
[<942771f8>] sock_ioctl+0x29c/0x2fc
[<941a0fb4>] vfs_ioctl+0x2c/0x7c
[<941a16ec>] do_vfs_ioctl+0x5dc/0x630
[<941a1790>] sys_ioctl+0x50/0x88
[<94101e10>] stack_done+0x20/0x3c

Signed-off-by: peter fuerst <post@pfrst.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1050/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Seems I trimmed one too many lines in
29ca2d81bd2a62fa86bc9a72ddadcf03d7daf795 (lmo) rsp
7084338e (kernel.org) which led to no
functioning Ethernet on my WAG54Gv2.  This patch restores the AWOL line.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1065/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Seems in my whitespace cleanup 0f2536082d01448daeced8d9e82c3ba1751fefa3
(lmo) rsp.  8c2961da46abd85a71d20f2b169bf80618e (kernel.org) caused AR7
to no longer get as far as init.  Fixed my phat fingering.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1064/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch fixes a kernel warning when loading the the loongson2_clock
driver:

"Feb 25 23:42:27 localhost kernel: [    4.965000] loongson2_clock: module
license 'unspecified' taints kernel."

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Reported-by: Liu Shiwei <liushiwei@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1045/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On Lemote 2F CS5536 MSRs are accessed through a index / data register pair.
The access sequence must be protected by a spinlock to be atomic.

Without this rebooting in fs2f_reboot() may fail.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1058/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1008/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

kernel/elfcore.c includes <linux/elf.h> which includes the <asm/elf.h>.  In
<asm/elf.h>, struct pt_regs is declared inside the parameter list of the
elf_dump_regs function which causes a kernel build warning.

Fixed by adding a forward declaration of struct pt_regs.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

octeon_reserve32_memory is defined In Octeon's setup.c, so remove the
redundant extern declaration of this variable.

Signed-off-by: Yang Shi <yang.shi@windriver.com>
To: f.fainelli@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1022/


Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Like x86 did in arch/x86/kernel/{process_32.c,process_64.c}, also don't
trace irqsoff for idle.

If there's no useful work to be done, we don't care about the irqsoff
duration. If we trace the idle process, the max duration of irqsoff will
be the idle time and make the irqsoff tracer useless.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Patchwork: http://patchwork.linux-mips.org/patch/1044/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This may lead to warnings like:

BUG: using smp_processor_id() in preemptible [00000000] code: reboot/1989
caller is __udelay+0x14/0x70
Call Trace:
[<ffffffff8110ad28>] dump_stack+0x8/0x34
[<ffffffff812dde04>] debug_smp_processor_id+0xf4/0x110
[<ffffffff812d90bc>] __udelay+0x14/0x70
[<ffffffff81378274>] md_notify_reboot+0x12c/0x148
[<ffffffff81161054>] notifier_call_chain+0x64/0xc8
[<ffffffff811614dc>] __blocking_notifier_call_chain+0x64/0xc0
[<ffffffff8115566c>] kernel_restart_prepare+0x1c/0x38
[<ffffffff811556cc>] kernel_restart+0x14/0x50
[<ffffffff8115581c>] SyS_reboot+0x10c/0x1f0
[<ffffffff81103684>] handle_sysn32+0x44/0x84

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1029/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The config option CAVIUM_RESERVE32_USE_WIRED_TLB is not supported.
Remove the dead code controlled by it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1028/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Caused by 38b7827f - no, cpu_local_* was
not unused.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: David Daney <ddaney@caviumnetworks.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Check correct variable for allocation failure
  RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp()
  RDMA/cm: Set num_paths when manually assigning path records
  IB/cm: Fix device_create() return value check

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] Update default configuration.
  [S390] nss: add missing .previous statement to asm function
  [S390] increase default size of vmalloc area
  [S390] s390: disable change bit override
  [S390] fix io_return critical section cleanup
  [S390] sclp_async: potential buffer overflow
  [S390] arch/s390/kernel: Add missing unlock

* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits)
  cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch
  loop: Update mtime when writing using aops
  block: expose the statistics in blkio.time and blkio.sectors for the root cgroup
  backing-dev: Handle class_create() failure
  Block: Fix block/elevator.c elevator_get() off-by-one error
  drbd: lc_element_by_index() never returns NULL
  cciss: unlock on error path
  cfq-iosched: Do not merge queues of BE and IDLE classes
  cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging
  i2o: Remove the dangerous kobj_to_i2o_device macro
  block: remove 16 bytes of padding from struct request on 64bits
  cfq-iosched: fix a kbuild regression
  block: make CONFIG_BLK_CGROUP visible
  Remove GENHD_FL_DRIVERFS
  block: Export max number of segments and max segment size in sysfs
  block: Finalize conversion of block limits functions
  block: Fix overrun in lcm() and move it to lib
  vfs: improve writeback_inodes_wb()
  paride: fix off-by-one test
  drbd: fix al-to-on-disk-bitmap for 4k logical_block_size
  ...

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (29 commits)
  drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers
  drm/nv50: implement gpio set/get routines
  drm/nv50: parse/use some more de-magiced parts of gpio table entries
  drm/nouveau: store raw gpio table entry in bios gpio structs
  drm/nv40: Init some tiling-related PGRAPH state.
  drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.
  drm/nv50: another dodgy DP hack
  drm/nv50: punt hotplug irq handling out to workqueue
  drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders
  drm/nv50: Allow using the NVA3 new compute class.
  drm/nv50: cleanup properly if PDISPLAY init fails
  drm/nouveau: fixup the init failure paths some more
  drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark
  drm/nv40: add LVDS table quirk for Dell Latitude D620
  drm/nv40: rework lvds table parsing
  drm/nouveau: detect vram amount once, and save the value
  drm/nouveau: remove some unused members from drm_nouveau_private
  drm/nouveau: Make use of TTM busy_placements.
  drm/nv50: add more 0x100c80 flushy magic
  drm/nv50: fix fbcon when framebuffer above 4GiB mark
  ...

radix_tree_tag_get() is not safe to use concurrently with radix_tree_tag_set()
or radix_tree_tag_clear().  The problem is that the double tag_get() in
radix_tree_tag_get():

		if (!tag_get(node, tag, offset))
			saw_unset_tag = 1;
		if (height == 1) {
			int ret = tag_get(node, tag, offset);

may see the value change due to the action of set/clear.  RCU is no protection
against this as no pointers are being changed, no nodes are being replaced
according to a COW protocol - set/clear alter the node directly.

The documentation in linux/radix-tree.h, however, says that
radix_tree_tag_get() is an exception to the rule that "any function modifying
the tree or tags (...) must exclude other modifications, and exclude any
functions reading the tree".

The problem is that the next statement in radix_tree_tag_get() checks that the
tag doesn't vary over time:

			BUG_ON(ret && saw_unset_tag);

This has been seen happening in FS-Cache:

	https://www.redhat.com/archives/linux-cachefs/2010-April/msg00013.html



To this end, remove the BUG_ON() from radix_tree_tag_get() and note in various
comments that the value of the tag may change whilst the RCU read lock is held,
and thus that the return value of radix_tree_tag_get() may not be relied upon
unless radix_tree_tag_set/clear() and radix_tree_delete() are excluded from
running concurrently with it.

Reported-by: Romain DEGEZ <romain.degez@smartjog.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As suggested by Linus, fix up kmem_ptr_validate() to handle non-kernel pointers
more graciously. The patch changes kmem_ptr_validate() to use the newly
introduced kern_ptr_validate() helper to check that a pointer is a valid kernel
pointer before we attempt to convert it into a 'struct page'.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As suggested by Linus, introduce a kern_ptr_validate() helper that does some
sanity checks to make sure a pointer is a valid kernel pointer.  This is a
preparational step for fixing SLUB kmem_ptr_validate().

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit ba168fc3.

It changes user-visible sysfs interfaces, and breaks some existing user
space applications which apparently rely on the fact that the output
does not contain the "0x" prefix.

Requested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>