Commits · 5db17c96771ffa735f5cdfbd9b44f52f319f2637 · Mirrors / github.com / raspberrypi_linux

May 15, 2019

Alexei Starovoitov authored May 14, 2019



Daniel Borkmann says:

====================
This set fixes LRU map eviction in combination with map lookups out
of system call side from user space. Main patch is the second one and
test cases are adapted and added in the last one. Thanks!
====================

Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

5db17c96

bpf: test ref bit from data path and add new tests for syscall path · d2baab62

Daniel Borkmann authored May 14, 2019



The test_lru_map is relying on marking the LRU map entry via regular
BPF map lookup from system call side. This is basically for simplicity
reasons. Given we fixed marking entries in that case, the test needs
to be fixed as well. Here we add a small drop-in replacement to retain
existing behavior for the tests by marking out of the BPF program and
transferring the retrieved value out via temporary map. This also adds
new test cases to track the new behavior where two elements are marked,
one via system call side and one via program side, where the next update
then evicts the key looked up only from system call side.

  # ./test_lru_map
  nr_cpus:8

  test_lru_sanity0 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity1 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity2 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity3 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity4 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity5 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity7 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity8 (map_type:9 map_flags:0x0): Pass

  test_lru_sanity0 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity1 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity2 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity3 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity4 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity5 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity7 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity8 (map_type:10 map_flags:0x0): Pass

  test_lru_sanity0 (map_type:9 map_flags:0x2): Pass
  test_lru_sanity4 (map_type:9 map_flags:0x2): Pass
  test_lru_sanity6 (map_type:9 map_flags:0x2): Pass
  test_lru_sanity7 (map_type:9 map_flags:0x2): Pass
  test_lru_sanity8 (map_type:9 map_flags:0x2): Pass

  test_lru_sanity0 (map_type:10 map_flags:0x2): Pass
  test_lru_sanity4 (map_type:10 map_flags:0x2): Pass
  test_lru_sanity6 (map_type:10 map_flags:0x2): Pass
  test_lru_sanity7 (map_type:10 map_flags:0x2): Pass
  test_lru_sanity8 (map_type:10 map_flags:0x2): Pass

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

d2baab62

bpf, lru: avoid messing with eviction heuristics upon syscall lookup · 50b045a8

Daniel Borkmann authored May 14, 2019

One of the biggest issues we face right now with picking LRU map over
regular hash table is that a map walk out of user space, for example,
to just dump the existing entries or to remove certain ones, will
completely mess up LRU eviction heuristics and wrong entries such
as just created ones will get evicted instead. The reason for this
is that we mark an entry as "in use" via bpf_lru_node_set_ref() from
system call lookup side as well. Thus upon walk, all entries are
being marked, so information of actual least recently used ones
are "lost".

In case of Cilium where it can be used (besides others) as a BPF
based connection tracker, this current behavior causes disruption
upon control plane changes that need to walk the map from user space
to evict certain entries. Discussion result from bpfconf [0] was that
we should simply just remove marking from system call side as no
good use case could be found where it's actually needed there.
Therefore this patch removes marking for regular LRU and per-CPU
flavor. If there ever should be a need in future, the behavior could
be selected via map creation flag, but due to mentioned reason we
avoid this here.

  [0] http://vger.kernel.org/bpfconf.html

Fixes: 29ba732a ("bpf: Add BPF_MAP_TYPE_LRU_HASH")
Fixes: 8f844938

 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

50b045a8

bpf: add map_lookup_elem_sys_only for lookups from syscall side · c6110222

Daniel Borkmann authored May 14, 2019



Add a callback map_lookup_elem_sys_only() that map implementations
could use over map_lookup_elem() from system call side in case the
map implementation needs to handle the latter differently than from
the BPF data path. If map_lookup_elem_sys_only() is set, this will
be preferred pick for map lookups out of user space. This hook is
used in a follow-up fix for LRU map, but once development window
opens, we can convert other map types from map_lookup_elem() (here,
the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use
the callback to simplify and clean up the latter.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

c6110222

May 14, 2019

tools/bpf: Sync kernel btf.h header · 2474c628

Gary Lin authored May 14, 2019



For the fix of BTF_INT_OFFSET().

Signed-off-by: Gary Lin <glin@suse.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

2474c628

bpf: btf: fix the brackets of BTF_INT_OFFSET() · 948dc8c9

Gary Lin authored May 13, 2019

'VAL' should be protected by the brackets.

v2:
* Squash the fix for Documentation/bpf/btf.rst

Fixes: 69b693f0

 ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

948dc8c9

bpf: sockmap fix msg->sg.size account on ingress skb · cabede8b

John Fastabend authored May 13, 2019

When converting a skb to msg->sg we forget to set the size after the
latest ktls/tls code conversion. This patch can be reached by doing
a redir into ingress path from BPF skb sock recv hook. Then trying to
read the size fails.

Fix this by setting the size.

Fixes: 604326b4

 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

cabede8b

bpf: sockmap remove duplicate queue free · c42253cc

John Fastabend authored May 13, 2019

In tcp bpf remove we free the cork list and purge the ingress msg
list. However we do this before the ref count reaches zero so it
could be possible some other access is in progress. In this case
(tcp close and/or tcp_unhash) we happen to also hold the sock
lock so no path exists but lets fix it otherwise it is extremely
fragile and breaks the reference counting rules. Also we already
check the cork list and ingress msg queue and free them once the
ref count reaches zero so its wasteful to check twice.

Fixes: 604326b4

 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

c42253cc

bpf: sockmap, only stop/flush strp if it was enabled at some point · 01489436

John Fastabend authored May 13, 2019

If we try to call strp_done on a parser that has never been
initialized, because the sockmap user is only using TX side for
example we get the following error.

[ 883.422081] WARNING: CPU: 1 PID: 208 at kernel/workqueue.c:3030 __flush_work+0x1ca/0x1e0
...
[ 883.422095] Workqueue: events sk_psock_destroy_deferred
[ 883.422097] RIP: 0010:__flush_work+0x1ca/0x1e0

This had been wrapped in a 'if (psock->parser.enabled)' logic which
was broken because the strp_done() was never actually being called
because we do a strp_stop() earlier in the tear down logic will
set parser.enabled to false. This could result in a use after free
if work was still in the queue and was resolved by the patch here,
1d79895a ("sk_msg: Always cancel strp work before freeing the
psock"). However, calling strp_stop(), done by the patch marked in
the fixes tag, only is useful if we never initialized a strp parser
program and never initialized the strp to start with. Because if
we had initialized a stream parser strp_stop() would have been called
by sk_psock_drop() earlier in the tear down process. By forcing the
strp to stop we get past the WARNING in strp_done that checks
the stopped flag but calling cancel_work_sync on work that has never
been initialized is also wrong and generates the warning above.

To fix check if the parser program exists. If the program exists
then the strp work has been initialized and must be sync'd and
cancelled before free'ing any structures. If no program exists we
never initialized the stream parser in the first place so skip the
sync/cancel logic implemented by strp_done.

Finally, remove the strp_done its not needed and in the case where we
are using the stream parser has already been called.

Fixes: e8e34377

("bpf: Stop the psock parser before canceling its work")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

01489436

bpf: mark bpf_event_notify and bpf_event_init as static · 390e99cf

Stanislav Fomichev authored May 13, 2019

Both of them are not declared in the headers and not used outside
of bpf_trace.c file.

Fixes: a38d1107

 ("bpf: support raw tracepoints in modules")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

390e99cf

bpf: devmap: fix use-after-free Read in __dev_map_entry_free · 2baae354

Eric Dumazet authored May 13, 2019

synchronize_rcu() is fine when the rcu callbacks only need
to free memory (kfree_rcu() or direct kfree() call rcu call backs)

__dev_map_entry_free() is a bit more complex, so we need to make
sure that call queued __dev_map_entry_free() callbacks have completed.

sysbot report:

BUG: KASAN: use-after-free in dev_map_flush_old kernel/bpf/devmap.c:365
[inline]
BUG: KASAN: use-after-free in __dev_map_entry_free+0x2a8/0x300
kernel/bpf/devmap.c:379
Read of size 8 at addr ffff8801b8da38c8 by task ksoftirqd/1/18

CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  dev_map_flush_old kernel/bpf/devmap.c:365 [inline]
  __dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379
  __rcu_reclaim kernel/rcu/rcu.h:178 [inline]
  rcu_do_batch kernel/rcu/tree.c:2558 [inline]
  invoke_rcu_callbacks kernel/rcu/tree.c:2818 [inline]
  __rcu_process_callbacks kernel/rcu/tree.c:2785 [inline]
  rcu_process_callbacks+0xe9d/0x1760 kernel/rcu/tree.c:2802
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
  run_ksoftirqd+0x86/0x100 kernel/softirq.c:645
  smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
  kthread+0x345/0x410 kernel/kthread.c:240
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

Allocated by task 6675:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
  kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
  kmalloc include/linux/slab.h:513 [inline]
  kzalloc include/linux/slab.h:706 [inline]
  dev_map_alloc+0x208/0x7f0 kernel/bpf/devmap.c:102
  find_and_alloc_map kernel/bpf/syscall.c:129 [inline]
  map_create+0x393/0x1010 kernel/bpf/syscall.c:453
  __do_sys_bpf kernel/bpf/syscall.c:2351 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:2328 [inline]
  __x64_sys_bpf+0x303/0x510 kernel/bpf/syscall.c:2328
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 26:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
  kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
  __cache_free mm/slab.c:3498 [inline]
  kfree+0xd9/0x260 mm/slab.c:3813
  dev_map_free+0x4fa/0x670 kernel/bpf/devmap.c:191
  bpf_map_free_deferred+0xba/0xf0 kernel/bpf/syscall.c:262
  process_one_work+0xc64/0x1b70 kernel/workqueue.c:2153
  worker_thread+0x181/0x13a0 kernel/workqueue.c:2296
  kthread+0x345/0x410 kernel/kthread.c:240
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the object at ffff8801b8da37c0
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8801b8da37c0, ffff8801b8da39c0)
The buggy address belongs to the page:
page:ffffea0006e368c0 count:1 mapcount:0 mapping:ffff8801da800940
index:0xffff8801b8da3540
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0007217b88 ffffea0006e30cc8 ffff8801da800940
raw: ffff8801b8da3540 ffff8801b8da3040 0000000100000004 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8801b8da3780: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
  ffff8801b8da3800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8801b8da3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                               ^
  ffff8801b8da3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8801b8da3980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 546ac1ff

 ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by:  <syzbot+457d3e2ffbcf31aee5c0@syzkaller.appspotmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

2baae354

net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering · d4c26eb6

Corentin Labbe authored May 13, 2019

When adding more MAC addresses to a dwmac-sun8i interface, the device goes
directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.

So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.

Fixes: 9f93ac8d

 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

d4c26eb6

net: ethernet: ti: netcp_ethss: fix build · a8577e13

Grygorii Strashko authored May 13, 2019

Fix reported build fail:
ERROR: "cpsw_ale_flush_multicast" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!
ERROR: "cpsw_ale_create" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!
ERROR: "cpsw_ale_add_vlan" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!

Fixes: 16f54164

 ("net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE config option")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a8577e13

flow_dissector: disable preemption around BPF calls · b1c17a9a

Eric Dumazet authored May 13, 2019

Various things in eBPF really require us to disable preemption
before running an eBPF program.

syzbot reported :

BUG: assuming atomic context at net/core/flow_dissector.c:737
in_atomic(): 0, irqs_disabled(): 0, pid: 24710, name: syz-executor.3
2 locks held by syz-executor.3/24710:
 #0: 00000000e81a4bf1 (&tfile->napi_mutex){+.+.}, at: tun_get_user+0x168e/0x3ff0 drivers/net/tun.c:1850
 #1: 00000000254afebd (rcu_read_lock){....}, at: __skb_flow_dissect+0x1e1/0x4bb0 net/core/flow_dissector.c:822
CPU: 1 PID: 24710 Comm: syz-executor.3 Not tainted 5.1.0+ #6
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 __cant_sleep kernel/sched/core.c:6165 [inline]
 __cant_sleep.cold+0xa3/0xbb kernel/sched/core.c:6142
 bpf_flow_dissect+0xfe/0x390 net/core/flow_dissector.c:737
 __skb_flow_dissect+0x362/0x4bb0 net/core/flow_dissector.c:853
 skb_flow_dissect_flow_keys_basic include/linux/skbuff.h:1322 [inline]
 skb_probe_transport_header include/linux/skbuff.h:2500 [inline]
 skb_probe_transport_header include/linux/skbuff.h:2493 [inline]
 tun_get_user+0x2cfe/0x3ff0 drivers/net/tun.c:1940
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037
 call_write_iter include/linux/fs.h:1872 [inline]
 do_iter_readv_writev+0x5fd/0x900 fs/read_write.c:693
 do_iter_write fs/read_write.c:970 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:951
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015
 do_writev+0x15b/0x330 fs/read_write.c:1058
 __do_sys_writev fs/read_write.c:1131 [inline]
 __se_sys_writev fs/read_write.c:1128 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1128
 do_syscall_64+0x103/0x670 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: d58e468b

 ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Petar Penkov <ppenkov@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

b1c17a9a

bonding: fix arp_validate toggling in active-backup mode · a9b8a2b3

Jarod Wilson authored May 10, 2019

There's currently a problem with toggling arp_validate on and off with an
active-backup bond. At the moment, you can start up a bond, like so:

modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1
ip link set bond0 down
echo "ens4f0" > /sys/class/net/bond0/bonding/slaves
echo "ens4f1" > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add 192.168.1.2/24 dev bond0

Pings to 192.168.1.1 work just fine. Now turn on arp_validate:

echo 1 > /sys/class/net/bond0/bonding/arp_validate

Pings to 192.168.1.1 continue to work just fine. Now when you go to turn
arp_validate off again, the link falls flat on it's face:

echo 0 > /sys/class/net/bond0/bonding/arp_validate
dmesg
...
[133191.911987] bond0: Setting arp_validate to none (0)
[133194.257793] bond0: bond_should_notify_peers: slave ens4f0
[133194.258031] bond0: link status definitely down for interface ens4f0, disabling it
[133194.259000] bond0: making interface ens4f1 the new active one
[133197.330130] bond0: link status definitely down for interface ens4f1, disabling it
[133197.331191] bond0: now running without any active interface!

The problem lies in bond_options.c, where passing in arp_validate=0
results in bond->recv_probe getting set to NULL. This flies directly in
the face of commit 3fe68df9, which says we need to set recv_probe =
bond_arp_recv, even if we're not using arp_validate. Said commit fixed
this in bond_option_arp_interval_set, but missed that we can get to that
same state in bond_option_arp_validate_set as well.

One solution would be to universally set recv_probe = bond_arp_recv here
as well, but I don't think bond_option_arp_validate_set has any business
touching recv_probe at all, and that should be left to the arp_interval
code, so we can just make things much tidier here.

Fixes: 3fe68df9

 ("bonding: always set recv_probe to bond_arp_rcv in arp monitor")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a9b8a2b3

net: meson: fixup g12a glue ephy id · 0ecfc7e1

Jerome Brunet authored May 12, 2019

The phy id chosen by Amlogic is incorrectly set in the mdio mux and
does not match the phy driver.

It was not detected before because DT forces the use the correct driver
for the internal PHY.

Fixes: 70904251

 ("net: phy: add amlogic g12a mdio mux support")
Reported-by: Qi Duan <qi.duan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

0ecfc7e1

net: phy: realtek: Replace phy functions with non-locked version in rtl8211e_config_init() · dffe7d2e

Kunihiko Hayashi authored May 13, 2019

After calling phy_select_page() and until calling phy_restore_page(),
the mutex 'mdio_lock' is already locked, so the driver should use
non-locked version of phy functions. Or there will be a deadlock with
'mdio_lock'.

This replaces phy functions called from rtl8211e_config_init() to avoid
the deadlock issue.

Fixes: f81dadbc

 ("net: phy: realtek: Add rtl8211e rx/tx delays config")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

dffe7d2e

net: seeq: fix crash caused by not set dev.parent · 5afcd14c

Thomas Bogendoerfer authored May 13, 2019

The old MIPS implementation of dma_cache_sync() didn't use the dev argument,
but commit c9eb6172

 ("dma-mapping: turn dma_cache_sync into a
dma_map_ops method") changed that, so we now need to set dev.parent.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

5afcd14c

May 13, 2019

Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · 3ebb41bf

David S. Miller authored May 13, 2019



Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Postpone chain policy update to drop after transaction is complete,
   from Florian Westphal.

2) Add entry to flowtable after confirmation to fix UDP flows with
   packets going in one single direction.

3) Reference count leak in dst object, from Taehee Yoo.

4) Check for TTL field in flowtable datapath, from Taehee Yoo.

5) Fix h323 conntrack helper due to incorrect boundary check,
   from Jakub Jankowski.

6) Fix incorrect rcu dereference when fetching basechain stats,
   from Florian Westphal.

7) Missing error check when adding new entries to flowtable,
   from Taehee Yoo.

8) Use version field in nfnetlink message to honor the nfgen_family
   field, from Kristian Evensen.

9) Remove incorrect configuration check for CONFIG_NF_CONNTRACK_IPV6,
   from Subash Abhinov Kasiviswanathan.

10) Prevent dying entries from being added to the flowtable,
    from Taehee Yoo.

11) Don't hit WARN_ON() with malformed blob in ebtables with
    trailing data after last rule, reported by syzbot, patch
    from Florian Westphal.

12) Remove NFT_CT_TIMEOUT enumeration, never used in the kernel
    code.

13) Fix incorrect definition for NFT_LOGLEVEL_MAX, from Florian
    Westphal.

This batch comes with a conflict that can be fixed with this patch:

diff --cc include/uapi/linux/netfilter/nf_tables.h
index 7bdb234f3d8c,f0cf7b0f4f35..505393c6e959
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@@ -966,6 -966,8 +966,7 @@@ enum nft_socket_keys
   * @NFT_CT_DST_IP: conntrack layer 3 protocol destination (IPv4 address)
   * @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address)
   * @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address)
 - * @NFT_CT_TIMEOUT: connection tracking timeout policy assigned to conntrack
+  * @NFT_CT_ID: conntrack id
   */
  enum nft_ct_keys {
  	NFT_CT_STATE,
@@@ -991,6 -993,8 +992,7 @@@
  	NFT_CT_DST_IP,
  	NFT_CT_SRC_IP6,
  	NFT_CT_DST_IP6,
 -	NFT_CT_TIMEOUT,
+ 	NFT_CT_ID,
  	__NFT_CT_MAX
  };
  #define NFT_CT_MAX		(__NFT_CT_MAX - 1)

That replaces the unused NFT_CT_TIMEOUT definition by NFT_CT_ID. If you prefer,
I can also solve this conflict here, just let me know.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3ebb41bf

of_net: Fix missing of_find_device_by_node ref count drop · 3ee9ae74

Petr Štetiar authored May 13, 2019

of_find_device_by_node takes a reference to the embedded struct device
which needs to be dropped after use.

Fixes: d01f449c

 ("of_net: add NVMEM support to of_get_mac_address")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

3ee9ae74

net: mvpp2: cls: Add missing NETIF_F_NTUPLE flag · da86f59f

Maxime Chevallier authored May 13, 2019

Now that the mvpp2 driver supports classification offloading, we must
add the NETIF_F_NTUPLE to the features list.

Since the current code doesn't allow disabling the feature, we don't set
the flag in dev->hw_features.

Fixes: 90b509b3

 ("net: mvpp2: cls: Add Classification offload support")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

da86f59f

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 69dda13f

David S. Miller authored May 12, 2019



Daniel Borkmann says:

====================
pull-request: bpf 2019-05-13

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix out of bounds backwards jumps due to a bug in dead code
   removal, from Daniel.

2) Fix libbpf users by detecting unsupported BTF kernel features
   and sanitize them before load, from Andrii.

3) Fix undefined behavior in narrow load handling of context
   fields, from Krzesimir.

4) Various BPF uapi header doc/man page fixes, from Quentin.

5) Misc .gitignore fixups to exclude built files, from Kelsey.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

69dda13f

bpf: fix undefined behavior in narrow load handling · e2f7fc0a

Krzesimir Nowak authored May 08, 2019

Commit 31fd8581 ("bpf: permits narrower load from bpf program
context fields") made the verifier add AND instructions to clear the
unwanted bits with a mask when doing a narrow load. The mask is
computed with

  (1 << size * 8) - 1

where "size" is the size of the narrow load. When doing a 4 byte load
of a an 8 byte field the verifier shifts the literal 1 by 32 places to
the left. This results in an overflow of a signed integer, which is an
undefined behavior. Typically, the computed mask was zero, so the
result of the narrow load ended up being zero too.

Cast the literal to long long to avoid overflows. Note that narrow
load of the 4 byte fields does not have the undefined behavior,
because the load size can only be either 1 or 2 bytes, so shifting 1
by 8 or 16 places will not overflow it. And reading 4 bytes would not
be a narrow load of a 4 bytes field.

Fixes: 31fd8581

 ("bpf: permits narrower load from bpf program context fields")
Reviewed-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Iago López Galeiras <iago@kinvolk.io>
Signed-off-by: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

e2f7fc0a

libbpf: detect supported kernel BTF features and sanitize BTF · d7c4b398

Andrii Nakryiko authored May 10, 2019



Depending on used versions of libbpf, Clang, and kernel, it's possible to
have valid BPF object files with valid BTF information, that still won't
load successfully due to Clang emitting newer BTF features (e.g.,
BTF_KIND_FUNC, .BTF.ext's line_info/func_info, BTF_KIND_DATASEC, etc), that
are not yet supported by older kernel.

This patch adds detection of BTF features and sanitizes BPF object's BTF
by substituting various supported BTF kinds, which have compatible layout:
  - BTF_KIND_FUNC -> BTF_KIND_TYPEDEF
  - BTF_KIND_FUNC_PROTO -> BTF_KIND_ENUM
  - BTF_KIND_VAR -> BTF_KIND_INT
  - BTF_KIND_DATASEC -> BTF_KIND_STRUCT

Replacement is done in such a way as to preserve as much information as
possible (names, sizes, etc) where possible without violating kernel's
validation rules.

v2->v3:
  - remove duplicate #defines from libbpf_util.h

v1->v2:
  - add internal libbpf_internal.h w/ common stuff
  - switch SK storage BTF to use new libbpf__probe_raw_btf()

Reported-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

d7c4b398

selftests: bpf: Add files generated after build to .gitignore · ff1f28c0

Kelsey Skunberg authored May 12, 2019



The following files are generated after building /selftests/bpf/ and
should be added to .gitignore:

	- libbpf.pc
	- libbpf.so.*

Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

ff1f28c0

Merge branch 'bpf-uapi-doc-fixes' · 6b1d90b7

Daniel Borkmann authored May 13, 2019



Quentin Monnet says:

====================
Another round of fixes for the doc in the BPF UAPI header, which can be
turned into a manual page. First patch is the most important, as it fixes
parsing for the bpf_strtoul() helper doc. Following patches are formatting
fixes (nitpicks, mostly). The last one updates the copy of the header,
located under tools/.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

6b1d90b7

tools: bpf: synchronise BPF UAPI header with tools · c1fe1e70

Quentin Monnet authored May 10, 2019



Synchronise the bpf.h header under tools, to report the fixes and
additions recently brought to the documentation for the BPF helpers.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

c1fe1e70

bpf: fix minor issues in documentation for BPF helpers. · 80867c5e

Quentin Monnet authored May 10, 2019

This commit brings many minor fixes to the documentation for BPF helper
functions. Mostly, this is limited to formatting fixes and improvements.
In particular, fix broken formatting for bpf_skb_adjust_room().

Besides formatting, replace the mention of "bpf_fullsock()" (that is not
associated with any function or type exposed to the user) in the
description of bpf_sk_storage_get() by "full socket".

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

80867c5e

bpf: fix recurring typo in documentation for BPF helpers · 32e7dc28

Quentin Monnet authored May 10, 2019



"Underlaying packet buffer" should be an "underlying" one, in the
warning about invalidated data and data_end pointers. Through
copy-and-paste, the typo occurred no fewer than 19 times in the
documentation. Let's fix it.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

32e7dc28

bpf: fix script for generating man page on BPF helpers · 748c7c82

Quentin Monnet authored May 10, 2019



The script broke on parsing function prototype for bpf_strtoul(). This
is because the last argument for the function is a pointer to an
"unsigned long". The current version of the script only accepts "const"
and "struct", but not "unsigned", at the beginning of argument types
made of several words.

One solution could be to add "unsigned" to the list, but the issue could
come up again in the future (what about "long int"?). It turns out we do
not need to have such restrictions on the words: so let's simply accept
any series of words instead.

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

748c7c82

bpf: add various test cases for backward jumps · 98583812

Daniel Borkmann authored May 10, 2019



Add a couple of tests to make sure branch(/call) offset adjustments
are correctly performed.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

98583812

net: dccp : proto: remove Unneeded variable "err" · 3285a9aa

Hariprasad Kelam authored May 12, 2019



Fix below issue reported by coccicheck

net/dccp/proto.c:266:5-8: Unneeded variable: "err". Return "0" on line
310

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3285a9aa

Merge branch 'dsa-Fix-a-bug-and-avoid-dangerous-usage-patterns' · 08b0dec4

David S. Miller authored May 12, 2019



Vladimir Oltean says:

====================
Fix a bug and avoid dangerous usage patterns around DSA_SKB_CB

Making DSA use the sk_buff control block was my idea during the
'Traffic-support-for-SJA1105-DSA-driver' patchset, and I had also
introduced a series of macro helpers that turned out to not be so
helpful:

1. DSA_SKB_ZERO() zeroizes the 48-byte skb->cb area, but due to the high
   performance impact in the hotpath it was only intended to be called
   from the timestamping path. But it turns out that not zeroizing it
   has uncovered the reading of an uninitialized member field of
   DSA_SKB_CB, so in the future just be careful about what needs
   initialization and remove this macro.
2. DSA_SKB_CLONE() contains a flaw in its body definition (originally
   put there to silence checkpatch.pl) and is unusable at this point
   (will only cause NPE's when used). So remove it.
3. For DSA_SKB_COPY() the same performance considerations apply as above
   and therefore it's best to prune this function before it reaches a
   stable kernel and potentially any users.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

08b0dec4

net: dsa: Remove the now unused DSA_SKB_CB_COPY() macro · 1c9b1420

Vladimir Oltean authored May 11, 2019

It's best to not expose this, due to the performance hit it may cause
when calling it.

Fixes: b68b0dd0

 ("net: dsa: Keep private info in the skb->cb")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

1c9b1420

net: dsa: Remove dangerous DSA_SKB_CLONE() macro · 506f0e09

Vladimir Oltean authored May 11, 2019

This does not cause any bug now because it has no users, but its body
contains two pointer definitions within a code block:

		struct sk_buff *clone = _clone;	\
		struct sk_buff *skb = _skb;	\

When calling the macro as DSA_SKB_CLONE(clone, skb), these variables
would obscure the arguments that the macro was called with, and the
initializers would be a no-op instead of doing their job (undefined
behavior, by the way, but GCC nicely puts NULL pointers instead).

So simply remove this broken macro and leave users to simply call
"DSA_SKB_CB(skb)->clone = clone" by hand when needed.

There is one functional difference when doing what I just suggested
above: the control block won't be transferred from the original skb into
the clone. Since there's no foreseen need for the control block in the
clone ATM, this is ok.

Fixes: b68b0dd0

 ("net: dsa: Keep private info in the skb->cb")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

506f0e09

net: dsa: Initialize DSA_SKB_CB(skb)->deferred_xmit variable · 87671375

Vladimir Oltean authored May 11, 2019

The sk_buff control block can have any contents on xmit put there by the
stack, so initialization is mandatory, since we are checking its value
after the actual DSA xmit (the tagger may have changed it).

The DSA_SKB_ZERO() macro could have been used for this purpose, but:
- Zeroizing a 48-byte memory region in the hotpath is best avoided.
- It would have triggered a warning with newer compilers since
  __dsa_skb_cb contains a structure within a structure, and the {0}
  initializer was incorrect for that purpose.

So simply remove the DSA_SKB_ZERO() macro and initialize the
deferred_xmit variable by hand (which should be done for all further
dsa_skb_cb variables which need initialization - currently none - to
avoid the performance penalty).

Fixes: 97a69a0d

 ("net: dsa: Add support for deferred xmit")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

87671375

netfilter: nf_tables: correct NFT_LOGLEVEL_MAX value · 92285a07

Florian Westphal authored May 12, 2019

should be same as NFT_LOGLEVEL_AUDIT, so use -, not +.

Fixes: 7eced5ab

 ("netfilter: nf_tables: add NFT_LOGLEVEL_* enumeration and use it")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

92285a07

May 12, 2019

net: phy: realtek: fix double page ops in generic Realtek driver · 8f779443

Heiner Kallweit authored May 11, 2019

When adding missing callbacks I missed that one had them set already.
Interesting that the compiler didn't complain.

Fixes: daf3ddbe

 ("net: phy: realtek: add missing page operations")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8f779443

net: qrtr: use protocol endiannes variable · 8f5e2451

Nicholas Mc Guire authored May 11, 2019



sparse was unable to verify endiannes correctness due to reassignment
from le32_to_cpu to the same variable - fix this warning up by providing
a proper __le32 type and initializing it. This is not actually fixing
any bug - rather just addressing the sparse warning.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8f5e2451

May 11, 2019

bpf: fix out of bounds backwards jmps due to dead code removal · af959b18

Daniel Borkmann authored May 11, 2019

systemtap folks reported the following splat recently:

  [ 7790.862212] WARNING: CPU: 3 PID: 26759 at arch/x86/kernel/kprobes/core.c:1022 kprobe_fault_handler+0xec/0xf0
  [...]
  [ 7790.864113] CPU: 3 PID: 26759 Comm: sshd Not tainted 5.1.0-0.rc7.git1.1.fc31.x86_64 #1
  [ 7790.864198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS[...]
  [ 7790.864314] RIP: 0010:kprobe_fault_handler+0xec/0xf0
  [ 7790.864375] Code: 48 8b 50 [...]
  [ 7790.864714] RSP: 0018:ffffc06800bdbb48 EFLAGS: 00010082
  [ 7790.864812] RAX: ffff9e2b75a16320 RBX: 0000000000000000 RCX: 0000000000000000
  [ 7790.865306] RDX: ffffffffffffffff RSI: 000000000000000e RDI: ffffc06800bdbbf8
  [ 7790.865514] RBP: ffffc06800bdbbf8 R08: 0000000000000000 R09: 0000000000000000
  [ 7790.865960] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc06800bdbbf8
  [ 7790.866037] R13: ffff9e2ab56a0418 R14: ffff9e2b6d0bb400 R15: ffff9e2b6d268000
  [ 7790.866114] FS:  00007fde49937d80(0000) GS:ffff9e2b75a00000(0000) knlGS:0000000000000000
  [ 7790.866193] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 7790.866318] CR2: 0000000000000000 CR3: 000000012f312000 CR4: 00000000000006e0
  [ 7790.866419] Call Trace:
  [ 7790.866677]  do_user_addr_fault+0x64/0x480
  [ 7790.867513]  do_page_fault+0x33/0x210
  [ 7790.868002]  async_page_fault+0x1e/0x30
  [ 7790.868071] RIP: 0010:          (null)
  [ 7790.868144] Code: Bad RIP value.
  [ 7790.868229] RSP: 0018:ffffc06800bdbca8 EFLAGS: 00010282
  [ 7790.868362] RAX: ffff9e2b598b60f8 RBX: ffffc06800bdbe48 RCX: 0000000000000004
  [ 7790.868629] RDX: 0000000000000004 RSI: ffffc06800bdbc6c RDI: ffff9e2b598b60f0
  [ 7790.868834] RBP: ffffc06800bdbcf8 R08: 0000000000000000 R09: 0000000000000004
  [ 7790.870432] R10: 00000000ff6f7a03 R11: 0000000000000000 R12: 0000000000000001
  [ 7790.871859] R13: ffffc06800bdbcb8 R14: 0000000000000000 R15: ffff9e2acd0a5310
  [ 7790.873455]  ? vfs_read+0x5/0x170
  [ 7790.874639]  ? vfs_read+0x1/0x170
  [ 7790.875834]  ? trace_call_bpf+0xf6/0x260
  [ 7790.877044]  ? vfs_read+0x1/0x170
  [ 7790.878208]  ? vfs_read+0x5/0x170
  [ 7790.879345]  ? kprobe_perf_func+0x233/0x260
  [ 7790.880503]  ? vfs_read+0x1/0x170
  [ 7790.881632]  ? vfs_read+0x5/0x170
  [ 7790.882751]  ? kprobe_ftrace_handler+0x92/0xf0
  [ 7790.883926]  ? __vfs_read+0x30/0x30
  [ 7790.885050]  ? ftrace_ops_assist_func+0x94/0x100
  [ 7790.886183]  ? vfs_read+0x1/0x170
  [ 7790.887283]  ? vfs_read+0x5/0x170
  [ 7790.888348]  ? ksys_read+0x5a/0xe0
  [ 7790.889389]  ? do_syscall_64+0x5c/0xa0
  [ 7790.890401]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

After some debugging, turns out that the logic in 2cbd95a5
("bpf: change parameters of call/branch offset adjustment") has
a bug that is exposed after 52875a04 ("bpf: verifier: remove
dead code") in that we miss some of the jump offset adjustments
after code patching when we remove dead code, more concretely,
upon backward jump spanning over the area that is being removed.

BPF insns of a case that was hit pre 52875a04:

  [...]
  676: (85) call bpf_perf_event_output#-47616
  677: (05) goto pc-636
  678: (62) *(u32 *)(r10 -64) = 0
  679: (bf) r7 = r10
  680: (07) r7 += -64
  681: (05) goto pc-44
  682: (05) goto pc-1
  683: (05) goto pc-1

BPF insns afterwards:

  [...]
  618: (85) call bpf_perf_event_output#-47616
  619: (05) goto pc-638
  620: (62) *(u32 *)(r10 -64) = 0
  621: (bf) r7 = r10
  622: (07) r7 += -64
  623: (05) goto pc-44

To illustrate the bug, situation looks as follows:
     ____
  0 |    | <-- foo: [...]
  1 |____|
  2 |____| <-- pos / end_new  ^
  3 |    |                    |
  4 |    |                    |  len
  5 |____|                    |  (remove region)
  6 |    | <-- end_old        v
  7 |    |
  8 |    | <-- curr  (jmp foo)
  9 |____|

The condition curr >= end_new && curr + off + 1 < end_new in the
branch delta adjustments is never hit because curr + off + 1 <
end_new is compared as unsigned and therefore curr + off + 1 >
end_new in unsigned realm as curr + off + 1 becomes negative
since the insns are memmove()'d before the offset adjustments.

Correct BPF insns after this fix:

  [...]
  618: (85) call bpf_perf_event_output#-47216
  619: (05) goto pc-578
  620: (62) *(u32 *)(r10 -64) = 0
  621: (bf) r7 = r10
  622: (07) r7 += -64
  623: (05) goto pc-44

Note that unprivileged case is not affected from this.

Fixes: 52875a04 ("bpf: verifier: remove dead code")
Fixes: 2cbd95a5

 ("bpf: change parameters of call/branch offset adjustment")
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

af959b18