- Mar 20, 2023
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve some reported issues. They include: - 8250 driver Kconfig issue pointed out by you that showed up in -rc1 - qcom-geni serial driver fixes - various 8250 driver fixes for reported problems - fsl_lpuart driver fixes - serdev fix for regression in -rc1 - vt.c bugfix All have been in linux-next for over a week with no reported problems" * tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: protect KD_FONT_OP_GET_TALL from unbound access serial: qcom-geni: drop bogus uart_write_wakeup() serial: qcom-geni: fix mapping of empty DMA buffer serial: qcom-geni: fix DMA mapping leak on shutdown serial: qcom-geni: fix console shutdown hang serdev: Set fwnode for serdev devices tty: serial: fsl_lpuart: fix race on RX DMA shutdown serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default serial: 8250_fsl: fix handle_irq locking serial: 8250_em: Fix UART port type serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc/other driver subsystem patches to resolve reported problems for 6.3-rc3. Included in here are: - Interconnect driver fixes for reported problems - Memory driver fixes for reported problems - nvmem core fix - firmware driver fix for reported problem All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits) memory: tegra30-emc: fix interconnect registration race memory: tegra20-emc: fix interconnect registration race memory: tegra124-emc: fix interconnect registration race memory: tegra: fix interconnect registration race interconnect: exynos: drop redundant link destroy interconnect: exynos: fix registration race interconnect: exynos: fix node leak in probe PM QoS error path interconnect: qcom: msm8974: fix registration race interconnect: qcom: rpmh: fix registration race interconnect: qcom: rpmh: fix probe child-node error handling interconnect: qcom: rpm: fix registration race nvmem: core: return -ENOENT if nvmem cell is not found firmware: xilinx: don't make a sleepable memory allocation from an atomic context interconnect: qcom: rpm: fix probe child-node error handling interconnect: qcom: osm-l3: fix registration race interconnect: imx: fix registration race interconnect: fix provider registration API interconnect: fix icc_provider_del() error handling interconnect: fix mem leak when freeing nodes interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fix from Borislav Petkov: - Flush out logged errors immediately after MCA banks configuration changes over sysfs have been done instead of waiting until something else triggers the workqueue later - another error or the polling interval cycle is reached * tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make sure logged MCEs are processed after sysfs update
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Check whether sibling events have been deactivated before adding them to groups - Update the proper event time tracking variable depending on the event type - Fix a memory overwrite issue due to using the wrong function argument when outputting perf events * tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix check before add_event_to_groups() in perf_group_detach() perf: fix perf_event_context->time perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "There's a little bit more 'movement' in there for my taste but it needs to happen and should make the code better after it. - Check cmdline_find_option()'s return value before further processing - Clear temporary storage in the resctrl code to prevent access to an unexistent MSR - Add a simple throttling mechanism to protect the hypervisor from potentially malicious SEV guests issuing requests in rapid succession. In order to not jeopardize the sanity of everyone involved in maintaining this code, the request issuing side has received a cleanup, split in more or less trivial, small and digestible pieces. Otherwise, the code was threatening to become an unmaintainable mess. Therefore, that cleanup is marked indirectly also for stable so that there's no differences between the upstream code and the stable variant when it comes down to backporting more there" * tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix use of uninitialized buffer in sme_enable() x86/resctrl: Clear staged_config[] before and after it is used virt/coco/sev-guest: Add throttling awareness virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case virt/coco/sev-guest: Do some code style cleanups virt/coco/sev-guest: Carve out the request issuing logic into a helper virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request() virt/coco/sev-guest: Simplify extended guest request handling virt/coco/sev-guest: Check SEV_SNP attribute at probe time
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fix from Ted Ts'o: "Fix a double unlock bug on an error path in ext4, found by smatch and syzkaller" * tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix possible double unlock when moving a directory
-
- Mar 19, 2023
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "The majority of lines changed is due to a code style cleanup in the pnmtologo helper program. Arnd removed the omap1 osk driver and the SIS fb driver is now orphaned. Other than that it's the usual bunch of small fixes and cleanups, e.g. prevent possible divide-by-zero in various fb drivers if the pixclock is zero and various conversions to devm_platform*() and of_property*() functions: - Drop omap1 osk driver - Various potential divide by zero pixclock fixes - Add pixelclock and fb_check_var() to stifb - Code style cleanups and indenting fixes" * tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: Use of_property_present() for testing DT property presence fbdev: au1200fb: Fix potential divide by zero fbdev: lxfb: Fix potential divide by zero fbdev: intelfb: Fix potential divide by zero fbdev: nvidia: Fix potential divide by zero fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks fbdev: omapfb: remove omap1 osk driver fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource() fbdev: wm8505fb: Use devm_platform_ioremap_resource() fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource() fbdev: Use of_property_read_bool() for boolean properties fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource() fbdev: tgafb: Fix potential divide by zero MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER fbdev: omapfb: cleanup inconsistent indentation drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c drivers: video: logo: fix code style issues in pnmtologo.c
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Exclude kallsyms_seqs_of_names from kallsyms to fix build error - Fix 'make kernelrelease' for external module builds - Get the Debian source package compilable again - Fix the wrong uname when Debian packages are built with the KDEB_PKGVERSION option - Fix superfluous CROSS_COMPILE when building Debian packages - Fix RPM package build error when KCONFIG_CONFIG is set - Use 'git archive' for creating source tarballs - Remove the scripts/list-gitignored tool * tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: use git-archive for source package creation kbuild: rpm-pkg: move source components to rpmbuild/SOURCES kbuild: deb-pkg: use dh_listpackages to know enabled packages kbuild: deb-pkg: split image and debug objects staging out into functions kbuild: deb-pkg: set CROSS_COMPILE only when undefined kbuild: deb-pkg: do not take KERNELRELEASE from the source version kbuild: deb-pkg: make debian source package working again Makefile: Make kernelrelease target work with M= kconfig: Update config changed flag before calling callback kallsyms: add kallsyms_seqs_of_names to list of special symbols
-
Linus Torvalds authored
Merge tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - ltc2992, adm1266: Set missing can_sleep flag - tmp512/tmp513: Drop of_match_ptr for ID table to fix build with !CONFIG_OF - ucd90320: Fix back-to-back access problem - ina3221: Fix bad error return from probe function - xgene: Fix use-after-free bug in remove function - adt7475: Fix hysteresis register bit masks, and fix association of 'smoothing' attributes * tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip hwmon: (adm1266) Set `can_sleep` flag for GPIO chip hwmon: tmp512: drop of_match_ptr for ID table hwmon: (ucd90320) Add minimum delay between bus accesses hwmon: (ina3221) return prober error code hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition hwmon: (adt7475) Fix masking of hysteresis registers hwmon: (adt7475) Display smoothing attributes in correct order
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fixes from Damien Le Moal: - Two fixes from Ondrej for the pata_parport driver to address an issue with error handling during drive connection and to fix memory leaks in case of errors during initialization and when disconnecting a device. * tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_parport: fix memory leaks ata: pata_parport: fix parport release without claim
-
Linus Torvalds authored
The __find_restype() function loops over the m5mols_default_ffmt[] array, and the termination condition ends up being wrong: instead of stopping when the iterator becomes the size of the array it traverses, it stops after it has already overshot the array. Now, in practice this doesn't likely matter, because the code will always find the entry it looks for, and will thus return early and never hit that last extra iteration. But it turns out that clang will unroll the loop fully, because it has only two iterations (well, three due to the off-by-one bug), and then clang will end up just giving up in the middle of the loop unrolling when it notices that the code walks past the end of the array. And that made 'objtool' very unhappy indeed, because the generated code just falls off the edge of the universe, and ends up falling through to the next function, causing this warning: drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc() Fix the loop ending condition. Reported-by:
Jens Axboe <axboe@kernel.dk> Analyzed-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Analyzed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/linux-block/CAHk-=wgTSdKYbmB1JYM5vmHMcD9J9UZr0mn7BOYM_LudrP+Xvw@mail.gmail.com/ Fixes: bc125106 ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP") Cc: HeungJun, Kim <riverful.kim@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Mar 18, 2023
-
-
Theodore Ts'o authored
Fixes: 0813299c ("ext4: Fix possible corruption when moving a directory") Link: https://lore.kernel.org/r/5efbe1b9-ad8b-4a4f-b422-24824d2b775c@kili.mountain Reported-by:
Dan Carpenter <error27@gmail.com> Reported-by:
<syzbot+0c73d1d8b952c5f3d714@syzkaller.appspotmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wifi and ipsec. A little more changes than usual, but it's pretty normal for us that the rc3/rc4 PRs are oversized as people start testing in earnest. Possibly an extra boost from people deploying the 6.1 LTS but that's more of an unscientific hunch. Current release - regressions: - phy: mscc: fix deadlock in phy_ethtool_{get,set}_wol() - virtio: vsock: don't use skbuff state to account credit - virtio: vsock: don't drop skbuff on copy failure - virtio_net: fix page_to_skb() miscalculating the memory size Current release - new code bugs: - eth: correct xdp_features after device reconfig - wifi: nl80211: fix the puncturing bitmap policy - net/mlx5e: flower: - fix raw counter initialization - fix missing error code - fix cloned flow attribute - ipa: - fix some register validity checks - fix a surprising number of bad offsets - kill FILT_ROUT_CACHE_CFG IPA register Previous releases - regressions: - tcp: fix bind() conflict check for dual-stack wildcard address - veth: fix use after free in XDP_REDIRECT when skb headroom is small - ipv4: fix incorrect table ID in IOCTL path - ipvlan: make skb->skb_iif track skb->dev for l3s mode - mptcp: - fix possible deadlock in subflow_error_report - fix UaFs when destroying unaccepted and listening sockets - dsa: mv88e6xxx: fix max_mtu of 1492 on 6165, 6191, 6220, 6250, 6290 Previous releases - always broken: - tcp: tcp_make_synack() can be called from process context, don't assume preemption is disabled when updating stats - netfilter: correct length for loading protocol registers - virtio_net: add checking sq is full inside xdp xmit - bonding: restore IFF_MASTER/SLAVE flags on bond enslave Ethertype change - phy: nxp-c45-tja11xx: fix MII_BASIC_CONFIG_REV bit number - eth: i40e: fix crash during reboot when adapter is in recovery mode - eth: ice: avoid deadlock on rtnl lock when auxiliary device plug/unplug meets bonding - dsa: mt7530: - remove now incorrect comment regarding port 5 - set PLL frequency and trgmii only when trgmii is used - eth: mtk_eth_soc: reset PCS state when changing interface types Misc: - ynl: another license adjustment - move the TCA_EXT_WARN_MSG attribute for tc action" * tag 'net-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits) selftests: bonding: add tests for ether type changes bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change net: renesas: rswitch: Fix GWTSDIE register handling net: renesas: rswitch: Fix the output value of quote from rswitch_rx() ethernet: sun: add check for the mdesc_grab() net: ipa: fix some register validity checks net: ipa: kill FILT_ROUT_CACHE_CFG IPA register net: ipa: add two missing declarations net: ipa: reg: include <linux/bug.h> net: xdp: don't call notifiers during driver init net/sched: act_api: add specific EXT_WARN_MSG for tc action Revert "net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" net: dsa: microchip: fix RGMII delay configuration on KSZ8765/KSZ8794/KSZ8795 ynl: make the tooling check the license ynl: broaden the license even more tools: ynl: make definitions optional again hsr: ratelimit only when errors are printed qed/qed_mng_tlv: correctly zero out ->min instead of ->hour selftests: net: devlink_port_split.py: skip test if no suitable device available ...
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: "A bit bigger than usual, as the NVMe pull request missed last weeks submission. In detail: - NVMe pull request via Christoph: - Avoid potential UAF in nvmet_req_complete (Damien Le Moal) - More quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen) - Fix a memory leak in the nvme-pci probe teardown path (Irvin Cote) - Repair the MAINTAINERS entry (Lukas Bulwahn) - Fix handling single range discard request (Ming Lei) - Show more opcode names in trace events (Minwoo Im) - Fix nvme-tcp timeout reporting (Sagi Grimberg) - MD pull request via Song: - Two fixes for old issues (Neil) - Resource leak in device stopping (Xiao) - Bio based device stats fix (Yu) - Kill unused CONFIG_BLOCK_COMPAT (Lukas) - sunvdc missing mdesc_grab() failure check (Liang) - Fix for reversal of request ordering upon issue for certain cases (Jan) - null_blk timeout fixes (Damien) - Loop use-after-free fix (Bart) - blk-mq SRCU fix for BLK_MQ_F_BLOCKING devices (Chris)" * tag 'block-6.3-2023-03-16' of git://git.kernel.dk/linux: block: remove obsolete config BLOCK_COMPAT md: select BLOCK_LEGACY_AUTOLOAD block: count 'ios' and 'sectors' when io is done for bio-based device block: sunvdc: add check for mdesc_grab() returning NULL nvmet: avoid potential UAF in nvmet_req_complete() nvme-trace: show more opcode names nvme-tcp: add nvme-tcp pdu size build protection nvme-tcp: fix opcode reporting in the timeout handler nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620 nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000 nvme-pci: fixing memory leak in probe teardown path nvme: fix handling single range discard request MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS block: null_blk: cleanup null_queue_rq() block: null_blk: Fix handling of fake timeout request blk-mq: fix "bad unlock balance detected" on q->srcu in __blk_mq_run_dispatch_ops loop: Fix use-after-free issues block: do not reverse request order when flushing plug list md: avoid signed overflow in slot_store() md: Free resources in __md_stop
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - When PF_NO_SETAFFINITY was removed for io-wq threads, we kind of forgot about the SQPOLL thread. Remove it there as well, there's even less of a reason to set it there (Michal) - Fixup a confusing 'ret' setting (Li) - When MSG_RING is used to send a direct descriptor to another ring, it's possible to have it allocate it on the target ring rather than provide a specific index for it. If this is done, return the chosen value in the CQE, like we would've done locally (Pavel) - Fix a regression in this series on huge page bvec collapsing (Pavel) * tag 'io_uring-6.3-2023-03-16' of git://git.kernel.dk/linux: io_uring/rsrc: fix folio accounting io_uring/msg_ring: let target know allocated index io_uring: rsrc: Optimize return value variable 'ret' io_uring/sqpoll: Do not set PF_NO_SETAFFINITY on sqpoll threads
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix an error code path issue in a cpuidle driver and make the sleepgraph utility more robust against unexpected input. Specifics: - Fix the psci_pd_init_topology() failure path in the PSCI cpuidle driver (Shawn Guo) - Modify the sleepgraph utility so it does not crash on binary data in device names (Todd Brandt)" * tag 'pm-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: pm-graph: sleepgraph: Avoid crashing on binary data in device names cpuidle: psci: Iterate backwards over list in psci_pd_remove()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These add some new quirks, fix PPTT handling, fix an ACPI utility and correct a mistake in the ACPI documentation. Specifics: - Fix ACPI PPTT handling to avoid sleep in the atomic context when it is not present (Sudeep Holla) - Add 'backlight=native' DMI quirk for Dell Vostro 15 3535 to the ACPI video driver (Chia-Lin Kao) - Add ACPI quirks for I2C device enumeration on Lenovo Yoga Book X90 and Acer Iconia One 7 B1-750 (Hans de Goede) - Fix handling of invalid command line option values in the ACPI pfrut utility (Chen Yu) - Fix references to I2C device data type in the ACPI documentation for device enumeration (Andy Shevchenko)" * tag 'acpi-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90 ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750 ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535 ACPI: docs: enumeration: Correct reference to the I²C device data type
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull turbostat fweaks and fixes from Len Brown: "Leprechaun sized fixes and tweaks touching only turbostat. 'Keeping happy users happy since 2010'" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2023.03.17 tools/power turbostat: fix decoding of HWP_STATUS tools/power turbostat: Introduce support for EMR tools/power turbostat: remove stray newlines from warn/warnx strings tools/power turbostat: Fix /dev/cpu_dma_latency warnings tools/power turbostat: Provide better debug messages for failed capabilities accesses tools/power turbostat: update dump of SECONDARY_TURBO_RATIO_LIMIT
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - cleanup for xen time handling - enable the VGA console in a Xen PVH dom0 - cleanup in the xenfs driver * tag 'for-linus-6.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: remove unnecessary (void*) conversions x86/PVH: obtain VGA console info in Dom0 x86/xen/time: cleanup xen_tsc_safe_clocksource xen: update arch/x86/include/asm/xen/cpuid.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - fixes to the ASID allocator to avoid leaking stale mappings between tasks - fix the vmalloc fault handler to tolerate huge pages * tag 'riscv-for-linus-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: mm: Support huge page in vmalloc_fault() riscv: asid: Fixup stale TLB entry cause application crash Revert "riscv: mm: notify remote harts about mmu cache updates"
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Update defconfigs - Fix early boot code by adding missing intersection check to prevent potential overwriting of the ipl report - Fix a use-after-free issue in s390-specific code related to PCI resources being retained after hot-unplugging individual functions, by removing the resources from the PCI bus's resource list and using the zpci_bar_struct's resource pointer directly * tag 's390-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs PCI: s390: Fix use-after-free of PCI resources with per-function hotplug s390/ipl: add missing intersection check to ipl_report handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix false detection of read faults, introduced by execute-only support - Fix a build failure when GENERIC_ALLOCATOR is not selected Thanks to Russell Currey, Randy Dunlap, Michal Suchánek, Nathan Lynch, and Benjamin Gray. * tag 'powerpc-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix false detection of read faults powerpc/pseries: RTAS work area requires GENERIC_ALLOCATOR
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC host fixes from Ulf Hansson: - dw_mmc-starfive: Fix initialization of the prev_err variable - sdhci_am654: Lower power-on failed message severity * tag 'mmc-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc-starfive: Fix initialization of prev_err mmc: sdhci_am654: lower power-on failed message severity
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Nothing surprising, a collection of small device-specific fixes. The majority of changes are for ASoC Intel stuff, while a few other ASoC and HD-audio fixes are found" * tag 'sound-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits) ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set() ALSA: asihpi: check pao in control_message() ASoC: hdmi-codec: only startup/shutdown on supported streams ASoC: da7219: Initialize jack_det_mutex ALSA: hda: Match only Intel devices with CONTROLLER_IN_GPU() ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform ALSA: hda: intel-dsp-config: add MTL PCI id ASoC: SOF: IPC4: update gain ipc msg definition to align with fw ASoC: SOF: sof-audio: don't squelch errors in WIDGET_SETUP phase ASoC: SOF: Intel: hda-ctrl: re-add sleep after entering and exiting reset ASoC: SOF: Intel: hda-dsp: harden D0i3 programming sequence ASoC: SOF: ipc4-topology: set dmic dai index from copier ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP ASoC: SOF: Intel: pci-tng: revert invalid bar size setting ASoC: SOF: topology: Fix error handling in sof_widget_ready() ASoC: Intel: soc-acpi: fix copy-paste issue in topology names ASoC: SOF: ipc4-topology: Fix incorrect sample rate print unit ASoC: SOF: ipc3: Check for upper size limit for the received message ASOC: SOF: Intel: pci-tgl: Fix device description ...
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Seems like a pretty regular rc3, i915 and amdgpu with the usual selection of fixes, then a scattering of fixes across misc drivers and other areas: accel: - build fix for accel edid: - fix info leak in edid ttm: - fix NULL ptr deref - reference counting fix i915: - Fix hwmon PL1 power limit enabling - Fix audio ELD handling for DP MST - Fix PSR io and wake line calculations - Fix DG2 HDMI modes with 267.30 and 319.89 MHz pixel clocks - Fix SSEU subslice out-of-bounds access - Fix misuse of non-idle barriers as fence trackers amdgpu: - SMU 13 update - RDNA2 suspend/resume fix when overclocking is enabled - SRIOV VCN fixes - HDCP suspend/resume fix - Fix drm polling splat regression - Fix dirty rectangle tracking for PSR - Fix vangogh regression on certain BIOSes - Misc display fixes - Suspend/resume IOMMU regression fix amdkfd: - Fix BO offset for multi-VMA page migration - Fix a possible double free - Fix potential use after free - Fix process cleanup on module exit bridge: - fix returned array size name documentation fbdev: - ref-counting fix for fbdev deferred I/O virtio: - dma sync fix shmem-helper: - error path fix msm: - shrinker blocking fix panfrost: - shrinker rpm fix chipsfb: - fix error code meson: - fix 1px pink line - fix regulator interaction sun4i: - fix missing component unbind" * tag 'drm-fixes-2023-03-17' of git://anongit.freedesktop.org/drm/drm: (38 commits) drm/ttm: drop extra ttm_bo_put in ttm_bo_cleanup_refs drm/amdgpu: Don't resume IOMMU after incomplete init drm/amdkfd: Fixed kfd_process cleanup on module exit. drm/amd/display: disconnect MPCC only on OTG change drm/amd/display: Fix DP MST sinks removal issue drm/amd/display: Do not set DRR on pipe Commit drm/amd/display: Remove OTG DIV register write for Virtual signals. drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion again drm/bridge: Fix returned array size name for atomic_get_input_bus_fmts kdoc drm/amdgpu/vcn: Disable indirect SRAM on Vangogh broken BIOSes drm/amdgpu/nv: fix codec array for SR_IOV drm/amd/display: Write to correct dirty_rect drm/amdgpu: move poll enabled/disable into non DC path drm/amd/display: Fix HDCP failing to enable after suspend drm/amdkfd: fix potential kgd_mem UAFs drm/amdgpu/vcn: custom video info caps for sriov drm/amd/pm: Fix sienna cichlid incorrect OD volage after resume drm/amd/pm: bump SMU 13.0.4 driver_if header version drm/amdkfd: fix a potential double free in pqm_create_queue drm/amdkfd: Get prange->offset after svm_range_vram_node_new ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Ten patches, eight in drivers and two in the core, which correct a regression from directory removal and add a no VPD size quirk also to fix a regression. All pretty small" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: mcq: Use active_reqs to check busy in clock scaling scsi: core: Fix a procfs host directory removal regression scsi: core: Add BLIST_NO_VPD_SIZE for some VDASD scsi: mpi3mr: Fix expander node leak in mpi3mr_remove() scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc() scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove() scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove() scsi: mpi3mr: Fix config page DMA memory leak scsi: mpi3mr: Fix throttle_groups memory leak scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()
-
- Mar 17, 2023
-
-
Rafael J. Wysocki authored
Merge a PSCI cpuidle driver fix for 6.3-rc1: - Fix the psci_pd_init_topology() failure path in the PSCI cpuidle driver (Shawn Guo). * pm-cpuidle: cpuidle: psci: Iterate backwards over list in psci_pd_remove()
-
Rafael J. Wysocki authored
Merge a new ACPI backlight quirk, new ACPI quirks for I2C device enumeration on some platforms, a pfrut utility fix and an ACPI documentation fix for 6.3-rc3: - Add backlight=native DMI quirk for Dell Vostro 15 3535 to the ACPI video driver (Chia-Lin Kao). - Add ACPI quirks for I2C devices enumeration on Lenovo Yoga Book X90 and Acer Iconia One 7 B1-750 (Hans de Goede). - Fix handling of invalid command line option values in the ACPI pfrut utility (Chen Yu). - Fix references to I2C device data type in the ACPI documentation for device enumeration (Andy Shevchenko). * acpi-video: ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535 * acpi-x86: ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Book X90 ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 7 B1-750 ACPI: x86: Introduce an acpi_quirk_skip_gpio_event_handlers() helper * acpi-tools: ACPI: tools: pfrut: Check if the input of level and type is in the right numeric range * acpi-docs: ACPI: docs: enumeration: Correct reference to the I²C device data type
-
Len Brown authored
Happy St. Patrick's Day! Signed-off-by:
Len Brown <len.brown@intel.com>
-
Antti Laakso authored
The "excursion to minimum" information is in bit2 in HWP_STATUS MSR. Fix the bitmask used for decoding the register. Signed-off-by:
Antti Laakso <antti.laakso@intel.com> Reviewed-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Zhang Rui authored
Introduce support for EMR. Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Reviewed-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Tested-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Len Brown authored
warn(3) terminates strings with newlines Signed-off-by:
Len Brown <len.brown@intel.com>
-
Prarit Bhargava authored
When running as non-root the following error is seen in turbostat: turbostat: fopen /dev/cpu_dma_latency : Permission denied turbostat and the man page have information on how to avoid other permission errors, so these can be fixed the same way. Provide better /dev/cpu_dma_latency warnings that provide instructions on how to avoid the error, and update the man page. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: linux-pm@vger.kernel.org Signed-off-by:
Len Brown <len.brown@intel.com>
-
Prarit Bhargava authored
turbostat reports some capabilities access errors and not others. Provide the same debug message for all errors. [lenb: remove extra quotes] Cc: David Arcari <darcari@redhat.com> Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Len Brown authored
cosmetic only (but useful if you copy/paste) Signed-off-by:
Len Brown <len.brown@intel.com>
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bonding: properly restore flags when bond changes ether type A bug was reported by syzbot[1] that causes a warning and a myriad of other potential issues if a bond, that is also a slave, fails to enslave a non-eth device. While fixing that bug I found that we have the same issues when such enslave passes and after that the bond changes back to ARPHRD_ETHER (again due to ether_setup). This set fixes all issues by extracting the ether_setup() sequence in a helper which does the right thing about bond flags when it needs to change back to ARPHRD_ETHER. It also adds selftests for these cases. Patch 01 adds the new bond_ether_setup helper and fixes the issues when a bond device changes its ether type due to successful enslave. Patch 02 fixes the issues when it changes its ether type due to an unsuccessful enslave. Note we need two patches because the bugs were introduced by different commits. Patch 03 adds the new selftests. Due to the comment adjustment and squash, could you please review patch 01 again? I've kept the other acks since there were no code changes. v3: squash the helper patch and the first fix, adjust the comment above it to be explicit about the bond device, no code changes v2: new set, all patches are new due to new approach of fixing these bugs [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add new network selftests for the bonding device which exercise the ether type changing call paths. They also test for the recent syzbot bug[1] which causes a warning and results in wrong device flags (IFF_SLAVE missing). The test adds three bond devices and a nlmon device, enslaves one of the bond devices to the other and then uses the nlmon device for successful and unsuccesful enslaves both of which change the bond ether type. Thus we can test for both MASTER and SLAVE flags at the same time. If the flags are properly restored we get: TEST: Change ether type of an enslaved bond device with unsuccessful enslave [ OK ] TEST: Change ether type of an enslaved bond device with successful enslave [ OK ] [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
Michal Kubiak <michal.kubiak@intel.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
syzbot reported a warning[1] where the bond device itself is a slave and we try to enslave a non-ethernet device as the first slave which fails but then in the error path when ether_setup() restores the bond device it also clears all flags. In my previous fix[2] I restored the IFF_MASTER flag, but I didn't consider the case that the bond device itself might also be a slave with IFF_SLAVE set, so we need to restore that flag as well. Use the bond_ether_setup helper which does the right thing and restores the bond's flags properly. Steps to reproduce using a nlmon dev: $ ip l add nlmon0 type nlmon $ ip l add bond1 type bond $ ip l add bond2 type bond $ ip l set bond1 master bond2 $ ip l set dev nlmon0 master bond1 $ ip -d l sh dev bond1 22: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000 (now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we try to delete it) [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef [2] commit 7d5cd2ce ("bonding: correctly handle bonding type change on enslave failure") [3] example warning: [ 27.008664] bond1: (slave nlmon0): The slave device specified does not support setting the MAC address [ 27.008692] bond1: (slave nlmon0): Error -95 calling set_mac_address [ 32.464639] bond1 (unregistering): Released all slaves [ 32.464685] ------------[ cut here ]------------ [ 32.464686] WARNING: CPU: 1 PID: 2004 at net/core/dev.c:10829 unregister_netdevice_many+0x72a/0x780 [ 32.464694] Modules linked in: br_netfilter bridge bonding virtio_net [ 32.464699] CPU: 1 PID: 2004 Comm: ip Kdump: loaded Not tainted 5.18.0-rc3+ #47 [ 32.464703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 32.464704] RIP: 0010:unregister_netdevice_many+0x72a/0x780 [ 32.464707] Code: 99 fd ff ff ba 90 1a 00 00 48 c7 c6 f4 02 66 96 48 c7 c7 20 4d 35 96 c6 05 fa c7 2b 02 01 e8 be 6f 4a 00 0f 0b e9 73 fd ff ff <0f> 0b e9 5f fd ff ff 80 3d e3 c7 2b 02 00 0f 85 3b fd ff ff ba 59 [ 32.464710] RSP: 0018:ffffa006422d7820 EFLAGS: 00010206 [ 32.464712] RAX: ffff8f6e077140a0 RBX: ffffa006422d7888 RCX: 0000000000000000 [ 32.464714] RDX: ffff8f6e12edbe58 RSI: 0000000000000296 RDI: ffffffff96d4a520 [ 32.464716] RBP: ffff8f6e07714000 R08: ffffffff96d63600 R09: ffffa006422d7728 [ 32.464717] R10: 0000000000000ec0 R11: ffffffff9698c988 R12: ffff8f6e12edb140 [ 32.464719] R13: dead000000000122 R14: dead000000000100 R15: ffff8f6e12edb140 [ 32.464723] FS: 00007f297c2f1740(0000) GS:ffff8f6e5d900000(0000) knlGS:0000000000000000 [ 32.464725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.464726] CR2: 00007f297bf1c800 CR3: 00000000115e8000 CR4: 0000000000350ee0 [ 32.464730] Call Trace: [ 32.464763] <TASK> [ 32.464767] rtnl_dellink+0x13e/0x380 [ 32.464776] ? cred_has_capability.isra.0+0x68/0x100 [ 32.464780] ? __rtnl_unlock+0x33/0x60 [ 32.464783] ? bpf_lsm_capset+0x10/0x10 [ 32.464786] ? security_capable+0x36/0x50 [ 32.464790] rtnetlink_rcv_msg+0x14e/0x3b0 [ 32.464792] ? _copy_to_iter+0xb1/0x790 [ 32.464796] ? post_alloc_hook+0xa0/0x160 [ 32.464799] ? rtnl_calcit.isra.0+0x110/0x110 [ 32.464802] netlink_rcv_skb+0x50/0xf0 [ 32.464806] netlink_unicast+0x216/0x340 [ 32.464809] netlink_sendmsg+0x23f/0x480 [ 32.464812] sock_sendmsg+0x5e/0x60 [ 32.464815] ____sys_sendmsg+0x22c/0x270 [ 32.464818] ? import_iovec+0x17/0x20 [ 32.464821] ? sendmsg_copy_msghdr+0x59/0x90 [ 32.464823] ? do_set_pte+0xa0/0xe0 [ 32.464828] ___sys_sendmsg+0x81/0xc0 [ 32.464832] ? mod_objcg_state+0xc6/0x300 [ 32.464835] ? refill_obj_stock+0xa9/0x160 [ 32.464838] ? memcg_slab_free_hook+0x1a5/0x1f0 [ 32.464842] __sys_sendmsg+0x49/0x80 [ 32.464847] do_syscall_64+0x3b/0x90 [ 32.464851] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 32.464865] RIP: 0033:0x7f297bf2e5e7 [ 32.464868] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 32.464869] RSP: 002b:00007ffd96c824c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 32.464872] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297bf2e5e7 [ 32.464874] RDX: 0000000000000000 RSI: 00007ffd96c82540 RDI: 0000000000000003 [ 32.464875] RBP: 00000000640f19de R08: 0000000000000001 R09: 000000000000007c [ 32.464876] R10: 00007f297bffabe0 R11: 0000000000000246 R12: 0000000000000001 [ 32.464877] R13: 00007ffd96c82d20 R14: 00007ffd96c82610 R15: 000055bfe38a7020 [ 32.464881] </TASK> [ 32.464882] ---[ end trace 0000000000000000 ]--- Fixes: 7d5cd2ce ("bonding: correctly handle bonding type change on enslave failure") Reported-by:
<syzbot+9dfc3f3348729cc82277@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
Michal Kubiak <michal.kubiak@intel.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add bond_ether_setup helper which is used to fix ether_setup() calls in the bonding driver. It takes care of both IFF_MASTER and IFF_SLAVE flags, the former is always restored and the latter only if it was set. If the bond enslaves non-ARPHRD_ETHER device (changes its type), then releases it and enslaves ARPHRD_ETHER device (changes back) then we use ether_setup() to restore the bond device type but it also resets its flags and removes IFF_MASTER and IFF_SLAVE[1]. Use the bond_ether_setup helper to restore both after such transition. [1] reproduce (nlmon is non-ARPHRD_ETHER): $ ip l add nlmon0 type nlmon $ ip l add bond2 type bond mode active-backup $ ip l set nlmon0 master bond2 $ ip l set nlmon0 nomaster $ ip l add bond1 type bond (we use bond1 as ARPHRD_ETHER device to restore bond2's mode) $ ip l set bond1 master bond2 $ ip l sh dev bond2 37: bond2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether be:d7:c5:40:5b:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500 (notice bond2's IFF_MASTER is missing) Fixes: e36b9d16 ("bonding: clean muticast addresses when device changes type") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yoshihiro Shimoda says: ==================== net: renesas: rswitch: Fix rx and timestamp I got reports locally about issues on the rswitch driver. So, fix the issues. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-