Skip to content
  1. Feb 09, 2014
  3. Jan 27, 2014
  5. Jan 04, 2014
  7. Jan 03, 2014
  9. Dec 25, 2013
  11. Dec 24, 2013
  13. Dec 23, 2013
  15. Dec 21, 2013
  17. Dec 20, 2013
  19. Dec 19, 2013
  21. Dec 18, 2013
  23. Dec 17, 2013
  25. Dec 16, 2013
  27. Dec 13, 2013
  29. Dec 11, 2013
  31. Dec 10, 2013
  33. Dec 09, 2013
  35. Dec 02, 2013
    • Arnaud Ebalard's avatar
      ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2 · 46ca506c
      Arnaud Ebalard authored 
      Almost all hardware parts of the NETGEAR ReadyNAS NV+ v2 ([1] for more
details) are supported by mainline kernel. The only missing elements in
provided .dts file are:

 - the front LCD module (Winstar WINSTAR WH1602): driver development is
   ongoing. This is the same LCD module as on ReadyNAS 104.
 - the Macronix MX25L512 512Kbit SPI flash: no time to play with it yet.

The device is the big brother (4 vs 2 bay) of the ReadyNAS Duo v2. The
main differences are some additional LEDs for the disks, a Marvell
88SM4140 SATA Port multiplier (no driver required to access the disk)
and previously described LCD module. Otherwise, it shares the same SoC
(kirkwood 88F6282), RAM (256MB), NAND (128MB), RTC chip (Ricoh rs5c372a),
fan controller (GMT G762), XHCI controller (NEC/Renesas µPD720200).

[1]: http://natisbad.org/NAS5/



Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
      46ca506c
    • Arnaud Ebalard's avatar
      ARM: mvebu: Add Netgear ReadyNAS 2120 board · 8aa0b019
      Arnaud Ebalard authored 
      

All hardware parts of the (mv78230 Armada XP based) NETGEAR ReadyNAS
2120 are supported by mainline kernel (USB 3.0 and eSATA rear ports,
USB 2.0 front port, Gigabit controller and PHYs for the two rear ports,
serial port, LEDs, Buttons, 88SE9170 SATA controllers, three G762 fan
controllers, G751 temperature sensor) except for:

 - the Intersil ISL12057 I2C RTC Chip,
 - the Armada NAND controller.

Support for both of those is currently work in progress and does not
prevent boot.

Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
      8aa0b019
  37. Nov 26, 2013
    • Tony Lindgren's avatar
      ARM: dts: Add basic support for omap3 LDP zoom1 labrador · bd5fc6fa
      Tony Lindgren authored 
      Basic things like serial, Ethernet, MMC, NAND, DSS, touchscreen
and GPIO keys work.

For twl4030-keypad we're still missing the binding, but
support for that should be trivial to add once the driver
has been updated.

MUSB I'm pretty sure I got got to enumerate once, but I
suspect the battery charging somehow disrupts it and it's
not enumerating in general for some reason.

Patches are welcome to improve things if people are
still using this board.

For reference, here's some more info on this old board:
http://www.openomap.org/wiki/tiki-index.php?page=HardwareInfo



Cc: devicetree@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      bd5fc6fa
    • Tony Lindgren's avatar
      ARM: dts: Add basic Nokia N8X0 support · a900f516
      Tony Lindgren authored 
      

Add minimal device tree support for n8x0 boards so we
can make omap2 device tree only. Note that we still need
to initialize various platform data quirks to keep
things working until n8x0 drivers support device tree.

Here's a rough todo list for the people using n8x0:

1. Update menelaus for device tree and set up
   regulators at least for the MMC driver

2. Remove the MMC regulator platform data callback
   by using the Menlaus regulators directly in the
   driver passed from the .dts file

3. Update GPMC connected devices for onenand and
   tusb6010 for device tree

We're planning to remove all legacy platform data
for mach-omap2 over next few merge cycles, so if
people are still using n8x0, please fix the issues
above.

Cc: devicetree@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Tested-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      a900f516
    • Tony Lindgren's avatar
      ARM: dts: Add basic device tree support for omap2430 sdp · 04a25dfb
      Tony Lindgren authored 
      

I doubt that there are many people using 2430 sdp, but as
that's been historically an important acid test platform
for omap2+ related changes, let's add minimal device
tree support for it.

If anybody is using it beyond minimal boot testing, patches
for more complete device tree support are welcome.

Cc: devicetree@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      04a25dfb
  39. Nov 01, 2013
  41. Oct 31, 2013
    • Arnaud Ebalard's avatar
      ARM: mvebu: Add Netgear ReadyNAS 104 board · 45e8815f
      Arnaud Ebalard authored 
      

Main hardware parts of the (Armada 370 based) NETGEAR ReadyNAS 104 are
supported by mainline kernel (USB 3.0 rear ports, USB 2.0 front port,
Gigabit controller and PHYs, serial port, LEDs, buttons, SATA ports,
G762 fan controller) and referenced in provided .dts file. Some additonal
work remains for:

 - Intersil ISL12057 I2C RTC and Alarm chip: working driver but needs
   to be splitted for submission of RTC part first;
 - Front LCD (Winstar 1602G): driver needs to be written
 - Armada NAND controller (to access onboard 128MB of NAND): support
   being pushed by @free-electrons people
 - 4 front SATA LEDs controlled via GPIO brought by NXP PCA9554:
   driver is available upstream. Not referenced/tested yet.

but the device is usable w/o those.

Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
      45e8815f