This backs out all changes that were added in the hip04-dt
branch after various boot problems were discovered in UEFI booting.

Reported-by: Tyler Baker <tyler.baker@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
[khilman: minor changelog updates]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'omap-for-v4.2/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Few more omap device tree changes for v4.2 merge window:

- Add dm9000 Ethernet support to omap3-devkit8000

- Add Toby-Churchill SL50 board support

- Add vendor prefix for Toby Churchill Ltd

* tag 'omap-for-v4.2/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-sl50: Add Toby-Churchill SL50 board support.
  of: Add vendor prefix for Toby Churchill Ltd.
  ARM: dts: omap3-devkit8000: Add dm9000 support

Merge tag 'samsung-dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung another DT udpates for v4.2

- use labels for overriding nodes for all of exynos stuff
  (by Krzysztof Kozlowski)

- add sysmmu nodes for exynos SoCs (by Marek Szyprowski)

- for exynos5422-odroidxu3
  : enalbe wake alarm of S2MPS11 RTC
  : Hook up PWM and use it for LEDs
  : add support for Odroid XU3 Lite

- remove duplicated i2c7 for exynos5250-snow
- add JPEG codec nodes for exynos5420
- add vendor prefix for Hardkernel

* tag 'samsung-dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (33 commits)
  ARM: dts: add sysmmu nodes for exynos5420
  ARM: dts: add sysmmu nodes for exynos5250
  ARM: dts: add sysmmu nodes for exynos4415
  ARM: dts: add sysmmu nodes for exynos3250
  ARM: dts: add sysmmu nodes for exynos4
  ARM: dts: Add Odroid XU3 Lite support
  of: Add vendor prefix for Hardkernel
  ARM: dts: odroidxu3: Enable wake alarm of S2MPS11 RTC
  ARM: dts: exynos5420: add nodes for jpeg codec
  ARM: dts: s3c2416: Use labels for overriding nodes in SMDK2416
  ARM: dts: s3c2416: Add labels to S3C2416 nodes
  ARM: dts: Use labels for overriding nodes in exynos5422-odroidxu3
  ARM: dts: Use labels for overriding nodes in exynos5440 boards
  ARM: dts: Use labels for overriding nodes in exynos5420-smdk5420
  ARM: dts: Use labels for overriding nodes in exynos542x
  ARM: dts: Use labels for overriding nodes in exynos5420-arndale-octa
  ARM: dts: Remove duplicated I2C7 nodes in exynos5250-snow
  ARM: dts: Use labels for overriding nodes in exynos5250
  ARM: dts: Add labels to exynos5 nodes
  ARM: dts: exynos5422-odroidxu3: Hook up PWM and use it for LEDs
  ...

Linux 4.1-rc6

 Conflicts:
	arch/arm/boot/dts/zynq-7000.dtsi

Resolution summary:

 Mainline had an earlier version of the commit, resolve in favor of the
 newer patch in next/dt branch.

Merge tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung DT updates for v4.2

- for exyos3250
  : use s3c6410-rtc instead of exynos3250-rtc
  : add JPEG codec node and support it on exynos3250-rinato
  : use s3c-rtc clock id for exynos3250-rinato and monk boards

- for exynos4
  : add JPEG codec node and syscon property to MIPI DPHY
  : remove obsolete MIPI DPHY reg property
  : enable s3c-rtc on exynos4412-trats2

- for exynos5
  : add syscon property to MIPI DPHY for exynos5420
  : enable s3c-rtc on exynos5420-arndale-octa
  : add missing irq pinctrl for max77686 on exynos5250-smdk5250

  : clk: add bindings for 32kHz clocks from s2mps11
  : fix pinctrl for s2mps11-irq on exynos5420-arndale-octa

- for exynos5422-odroidxu3
  : add mmc detect gpio and LEDs
  : add HS400 support, simple-audio-card and rtc_src clock

* tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add syscon property to the MIPI DPHY for exynos4415
  ARM: dts: Remove obsolete MIPI DPHY 'reg' property for exynos4
  ARM: dts: Use last parent for clocks during power domain on/off
  ARM: dts: add support JPEG codec for exynos3250-rinato
  ARM: dts: support simple-audio-card for exynos5420 and exynos5422-odroidxu3
  ARM: dts: add jpeg-codec node for exynos4 and exynos4x12
  ARM: dts: Enable S3C RTC on exynos4412-trats2 and exynos5420-arndale-octa
  ARM: dts: Use define for s3c-rtc clock id for exynos3250-monk
  ARM: dts: Use define for s3c-rtc clock id for exynos3250-rinato
  ARM: dts: Use s3c6410-rtc instead of exynos3250-rtc for exynos3250/4415
  ARM: dts: add 'rtc_src' clock to rtc node for exynos5422-odroidxu3
  clk: samsung: Add bindings for 32kHz clocks from s2mps11
  ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa
  ARM: dts: Add syscon property to the MIPI phy in exynos5420
  ARM: dts: Add HS400 support for exynos5422-odroidxu3
  ARM: dts: Add LEDs for exynos5422-odroidxu3
  ARM: dts: add mmc detect gpio for exynos5422-odroidxu3
  ARM: dts: add JPEG codec device node for exynos3250
  ARM: dts: Add missing irq pinctrl for max77686 on smdk5250

Adjust device tree entry to the proper registered compatible
string for LIS3LV02DL.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

The Juno board has two keys connected to a PL061 GPIO block,
in accordance to DDI0524B "ARM Versatile Express Juno Development
Platform" revision 1.0, table 2-4 "GPIO (0) and GPIO (1) used
for additional user key entry". By trial-and-error I found that
these are connected to the two keys named "power" and "home"
on the motherboard.

Register the GPIO block and these two keys in the device tree
using the PL061 GPIO driver and the generic gpio keys.

- Map POWER, HOME, VOL+ and VOL- to the obvious input events.
- Map RLOCK to KEY_SCREENLOCK/KEY_COFFEE unless someone can
  explain better what this is for.
- Map the NMI button to KEY_SYSREQ as this is used like so
  in the SYSREQ debugging hack.

Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

The xdmac channel configuration is done in one cell not two. This error
prevents from probing devices correctly.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 83906783

 ("ARM: at91/dt: sama5d4: add aes, sha and tdes nodes")
Cc: stable@vger.kernel.org # 4.1
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

ARM64: DT: Hisilicon hi6220 soc and hikey board updates for 4.2

- Added the devicetree bindings document for hi6220 SoC
- Added the devicetree bindings document for hi6220 clock
- Added dts files for hi6220 SoC and hikey board

* tag 'hi6620-dt-for-4.2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Add dts files for Hisilicon Hi6220 SoC
  clk: hi6220: Document devicetree bindings for hi6220 clock
  arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC

Merge tag 'at91-dt4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Fourth batch of DT changes for 4.2:
- rtc node for at91sam9rl/at91sam9rlek
- move to stdout-path for console on kizbox and all Atmel's boards
- Addition of the Acme Systems' Arietta G25
- two little fixes for Kizbox and sama5d4ek

* tag 'at91-dt4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sama5d4ek: mci0 uses slot 0
  ARM: at91/dt: kizbox: fix mismatch LED PWM device
  ARM: at91/dt: Add Acme Arietta G25
  ARM: at91/dt: sama5d4 xplained: use stdout-path
  ARM: at91/dt: sama5d4ek: use stdout-path
  ARM: at91/dt: sama5d3 xplained: use stdout-path
  ARM: at91/dt: sama5d3xek: use stdout-path
  ARM: at91/dt: at91sam9x5ek: use stdout-path
  ARM: at91/dt: at91sam9rlek: use stdout-path
  ARM: at91/dt: at91sam9n12ek: use stdout-path
  ARM: at91/dt: at91sam9m10g45ek use stdout-path
  ARM: at91/dt: at91sam9g20ek: use stdout-path
  ARM: at91/dt: at91sam9263ek: use stdout-path
  ARM: at91/dt: at91sam9261ek: use stdout-path
  ARM: at91/dt: at91rm9200ek: use stdout-path
  ARM: at91/dt: kizbox: use stdout-path
  ARM: at91/dt: at91sam9rlek: add RTC
  ARM: at91/dt: at91sam9rl: fix rtc node

The i.MX device tree changes for 4.2:
 - Add device tree for i.MX7D SoC and imx7d-sdb board
 - New i.MX6 board support: Armadeus Systems APF6, Gateworks GW5510,
   and aristainetos2 boards
 - Change LVDS to use simple-panel for nitrogen6x and sabrelite boards
 - Add Wifi/Bluetooth devices support for cubox-i board
 - Remove unused regulators and correct OTG roles setting for
   imx6sl-warp board
 - Add I2C support for imx23-olinuxino board
 - Move imx6qdl HDMI device to a better place
 - Add power-domain for imx6qdl CODA device

* tag 'imx-dt-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits)
  ARM: dts: imx6dl: add imx6dl gpt specific compatible string
  ARM: dts: imx6: add DT for aristainetos2 board
  ARM: dts: cubox-i/hummingboard: Fix the license text
  ARM: dts: sabrelite: use simple-panel instead of display-timings for LVDS0
  ARM: dts: nitrogen6x: use simple-panel instead of display-timings for LVDS0
  ARM: dts: add imx7d-sdb support
  ARM: dts: add imx7d soc dtsi file
  ARM: dts: Armadeus Systems APF6 family support (i.MX6)
  ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode.
  ARM: dts: cubox-i: add support for Broadcom Wifi/Bluetooth devices
  Document: dt: binding: imx: update document for imx7d support
  ARM: dts: imx6qdl: Add power-domain phandle to CODA device node
  ARM: dts: Gateworks GW5510 support (i.MX6)
  ARM: dts: imx6sl-warp: Fix OTG roles
  ARM: dts: imx6sl-warp: Remove USB regulators
  ARM: dts: imx6sl-warp: Remove unused regulator
  ARM: dts: add pinfunc include file to support imx7d
  ARM: mxs: fix in tree users of ssd1306
  ARM: dts: imx6qdl-hummingboard: Add PCIe support
  ARM: dts: imx23-olinuxino: Add i2c support
  ...

Merge tag 'keystone-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Keystone DTS update for 4.2
	- Includes NETCP related EVM updates

* tag 'keystone-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: k2l: fix the netcp range size
  ARM: dts: k2e: fix the netcp range size
  ARM: dts: k2hk: fix the netcp range size
  ARM: dts: k2l-evm: Add device bindings for netcp driver
  ARM: dts: k2e-evm: Add device bindings for netcp driver
  ARM: dts: k2hk-evm: Add device bindings for netcp driver

This pull request contains Broadcom BCM5301x related changes:

- Hauke adds the interrupt mapping for the BCM5301x PCIe controller

- Haule adds support for NAND flash using the standard Broadcom NAND controller
  iProc specific binding on BCM4708/5301x

- Rafal adds support for the Asus RT-AC87U router

* tag 'arm-soc/for-4.2/dts-part3' of https://github.com/Broadcom/stblinux:
  ARM: BCM5301X: Add DT for Asus RT-AC87U
  ARM: BCM5301X: add IRQ numbers for PCIe controller
  ARM: BCM5301X: add NAND flash chip description

The STMicrolectornics's STM32F429 MCU has the following main features:
 - Cortex-M4 core running up to @180MHz
 - 2MB internal flash, 256KBytes internal RAM
 - FMC controller to connect SDRAM, NOR and NAND memories
 - SD/MMC/SDIO support
 - Ethernet controller
 - USB OTFG FS & HS controllers
 - I2C, SPI, CAN busses support
 - Several 16 & 32 bits general purpose timers
 - Serial Audio interface
 - LCD controller

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Merge tag 'sunxi-dt-for-4.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Allwinner DT changes for 4.2, take 2

A bunch of new DT changes for the 4.2 merge window, among which:
  - Enable the SRAM controller on the A10/A10s/A13/A20
  - A33 support
  - New boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G

* tag 'sunxi-dt-for-4.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box
  ARM: dts: sun8i: Add dts file for the GA10H-A33 tablet
  ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board.
  ARM: dts: sun8i-a33: Add pinmux setting for uart0 on PB pins
  ARM: dts: sun8i: Add pinmux setting for 8bit mmc2
  ARM: dts: sun8i: Add usb_clk node for a23/a33
  ARM: dts: sun8i: Add ET-Q8 A33 support
  ARM: dts: sun8i: Add sun8i-a33 dtsi
  ARM: dts: sun8i: Add sun8i-a23-a33 dtsi
  ARM: dts: sun7i: Add A20 SRAM and SRAM controller
  ARM: dts: sun5i: Add A10s and A13 SRAM and SRAM controller
  ARM: dts: sun4i: Add A10 SRAM and SRAM controller
  ARM: dts: sunxi: Revert SRAM controller drivers patches
  ARM: dts: sun9i: Add device node for watchdog
  ARM: dts: sun7i: Add uart4 support for BananaPro, disable uart2
  ARM: dts: sun7i: Add uart4_pins_b definition
  ARM: sun8i: Introduce A23 Evaluation Board Support

Update the arria10 gmac nodes with all the necessary properties for ethernet
to function on the Arria10 devkit.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

k2l netcp range size is 16M (0x1000000) and not 0xffffff. This patch fixes
this. Similarly fix the size of switch module register space to 0x20000.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

k2e netcp range size is 16M (0x1000000) and not 0xffffff. This patch fixes
this. Similarly fix the size of switch module register space to 0x20000.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

k2hk netcp range size is 1M (0x100000) and not 0xfffff. This patch fixes
this.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

This patch enables networking on k2l evm by providing
device bindings for netcp, knav, and qmss. See device
binding documentation at

Documentation/devicetree/bindings/net/keystone-netcp.txt

Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

This patch enables networking on k2e evm by adding device
bindings for netcp, knav and qmss. See device binding
documentation below for details.

Documentation/devicetree/bindings/net/keystone-netcp.txt

Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

This patch enables networking on k2hk evm by adding device
bindings for netcp, knav and qmss.  See device binding
documentation below for details.

Documentation/devicetree/bindings/net/keystone-netcp.txt

Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

Merge tag 'socfpga_dts_for_v4.2_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA updates for v4.2 part 3
- Add SCU node for Arria 10
- Add enable-method for cpu nodes
- Add SDRAM controller binding doc
- Enable gpio-leds on SoCFPGA Socrates board

* tag 'socfpga_dts_for_v4.2_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: socrates: add gpio-leds
  ARM: socfpga: socrates: enable gpio0/1
  ARM: socfpga: dts: add sdram controller dt binding doc
  ARM: socfpga: dts: add enable-method property for cpu nodes
  ARM: socfpga: dts: add the a9-scu node for arria10

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The driver for the PCIe controller was just added, this adds the
missing definition of the IRQ numbers to device tree. The driver itself
will be automatically detected by bcma.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This adds the NAND flash chip description for a standard chip found
connected to this SoC. This makes use of generic Broadcom NAND driver
with the iProc interface.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Add initial dtsi file to support Hisilicon Hi6220 SoC with
support of Octal core CPUs in two clusters and each cluster
has quard Cortex-A53.

Also add dts file to support HiKey development board which
based on Hi6220 SoC.

Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Yiping Xu <xuyiping@hisilicon.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Document DT files bindings for Hisilicon hi6220 clock.

Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This patch adds documentation for the devicetree bindings used by the
DT files of Hisilicon hi6220 SoC mobile platform.

Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Mci0 uses slot 0 not 1.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 7a475267

 ("ARM: at91: dt: add device tree file for SAMA5D4ek board")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The network_red LED uses the 4th PWM device.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add a minimum Device Tree for Acme Arietta G25.
http://acme.systems/arietta



Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Sergio Tanzilli <tanzilli@acmesystems.it>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the bootargs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>