Commit 295525e2 ("virtio_net: merge dma operations when filling
mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when
the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we
do not want to do the sync for the entire page_frag. But that misses the
sync for the current area.

This patch does cpu sync regardless of whether the ref is zero or not.

Fixes: 295525e2 ("virtio_net: merge dma operations when filling mergeable buffers")
Reported-by: Michael Roth <michael.roth@amd.com>
Closes: http://lore.kernel.org/all/20230926130451.axgodaa6tvwqs3ut@amd.com


Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve
  a number of small reported issues. Included in here are:

   - thunderbolt driver fixes

   - xhci driver fixes

   - cdns3 driver fixes

   - musb driver fixes

   - a number of typec driver fixes

   - a few other small driver fixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope
  usb: typec: ucsi: Fix missing link removal
  usb: typec: altmodes/displayport: Signal hpd low when exiting mode
  xhci: Preserve RsvdP bits in ERSTBA register correctly
  xhci: Clear EHB bit only at end of interrupt handler
  xhci: track port suspend state correctly in unsuccessful resume cases
  usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer
  usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails
  usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub
  usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
  usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled
  usb: dwc3: Soft reset phy on probe for host
  usb: hub: Guard against accesses to uninitialized BOS descriptors
  usb: typec: qcom: Update the logic of regulator enable and disable
  usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call
  usb: musb: Get the musb_qh poniter after musb_giveback
  usb: musb: Modify the "HWVers" register address
  usb: cdnsp: Fixes issue with dequeuing not queued requests
  thunderbolt: Restart XDomain discovery handshake after failure
  thunderbolt: Correct TMU mode initialization from hardware
  ...

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
  some reported issues. Included in here are:

   - serial core pm runtime fix for issue reported by many

   - 8250_omap driver fix

   - rs485 spinlock fix for reported problem

   - ams-delta bugfix for previous tty api changes in -rc1 that missed
     this driver that never seems to get built in any test systems

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  ASoC: ti: ams-delta: Fix cx81801_receive() argument types
  serial: core: Fix checks for tx runtime PM state
  serial: 8250_omap: Fix errors with no_console_suspend
  serial: Reduce spinlocked portion of uart_rs485_config()

Pull char/misc driver fixes from Greg KH:
 "Here is a small set of char/misc and other smaller driver subsystem
  fixes for 6.6-rc6. Included in here are:

   - lots of iio driver fixes

   - binder memory leak fix

   - mcb driver fixes

   - counter driver fixes

   - firmware loader documentation fix

   - documentation update for embargoed hardware issues

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
  iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
  dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  iio: adc: ad7192: Correct reference voltage
  iio: light: vcnl4000: Don't power on/off chip in config
  iio: addac: Kconfig: update ad74413r selections
  iio: pressure: dps310: Adjust Timeout Settings
  iio: imu: bno055: Fix missing Kconfig dependencies
  iio: adc: imx8qxp: Fix address for command buffer registers
  iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
  dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
  binder: fix memory leaks of spam and pending work
  firmware_loader: Update contact emails for ABI docs
  Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
  mcb: remove is_added flag from mcb_device struct
  coresight: tmc-etr: Disable warnings for allocation failures
  coresight: Fix run time warnings while reusing ETR buffer
  iio: admv1013: add mixer_vgate corner cases
  iio: pressure: bmp280: Fix NULL pointer exception
  iio: dac: ad3552r: Correct device IDs
  ...

Pull overlayfs fixes from Amir Goldstein:

 - Various fixes for regressions due to conversion to new mount
   api in v6.5

 - Disable a new mount option syntax (append lowerdir) that was
   added in v6.5 because we plan to add a different lowerdir
   append syntax in v6.7

* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: temporarily disable appending lowedirs
  ovl: fix regression in showing lowerdir mount option
  ovl: fix regression in parsing of mount options with escaped comma
  fs: factor out vfs_parse_monolithic_sep() helper

Pull powerpc fixes from Michael Ellerman:

 - Fix softlockup/crash when using hcall tracing

 - Fix pte_access_permitted() for PAGE_NONE on 8xx

 - Fix inverted pte_young() test in __ptep_test_and_clear_young()
   on 64-bit BookE

 - Fix unhandled math emulation exception on 85xx

 - Fix kernel crash on syscall return on 476

Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N
Rao.

* tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/47x: Fix 47x syscall return crash
  powerpc/85xx: Fix math emulation exception
  powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()
  powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE
  powerpc/pseries: Remove unused r0 in the hcall tracing code
  powerpc/pseries: Fix STK_PARAM access in the hcall tracing code

Pull CPU hotplug fix from Ingo Molnar:
 "Fix a Longsoon build warning by harmonizing the
  arch_[un]register_cpu() prototypes between architectures"

* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu-hotplug: Provide prototypes for arch CPU registration

Pull smb server fixes from Steve French:

 - Fix for possible double free in RPC read

 - Add additional check to clarify smb2_open path and quiet Coverity

 - Fix incorrect error rsp in a compounding path

 - Fix to properly fail open of file with pending delete on close

* tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix potential double free on smb2_read_pipe() error path
  ksmbd: fix Null pointer dereferences in ksmbd_update_fstate()
  ksmbd: fix wrong error response status by using set_smb2_rsp_status()
  ksmbd: not allow to open file if delelete on close bit is set

Pull smb client fixes from Steve French:

 - fix caching race with open_cached_dir and laundromat cleanup of
   cached dirs (addresses a problem spotted with xfstest run with
   directory leases enabled)

 - reduce excessive resource usage of laundromat threads

* tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: prevent new fids from being removed by laundromat
  smb: client: make laundromat a delayed worker

Pull x86 fixes from Ingo Molnar:
 "Fix a false-positive KASAN warning, fix an AMD erratum on Zen4 CPUs,
  and fix kernel-doc build warnings"

* tag 'x86-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Disable KASAN in apply_alternatives()
  x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUs
  x86/resctrl: Fix kernel-doc warnings

Pull scheduler fixes from Ingo Molnar:
 "Two EEVDF fixes"

* tag 'sched-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/eevdf: Fix pick_eevdf()
  sched/eevdf: Fix min_deadline heap integrity

Pull x86 perf event fix from Ingo Molnar:
 "Fix an LBR sampling bug"

* tag 'perf-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/lbr: Filter vsyscall addresses

Kernel v6.5 converted overlayfs to new mount api.
As an added bonus, it also added a feature to allow appending lowerdirs
using lowerdir=:/lower2,lowerdir=::/data3 syntax.

This new syntax has raised some concerns regarding escaping of colons.
We decided to try and disable this syntax, which hasn't been in the wild
for so long and introduce it again in 6.7 using explicit mount options
lowerdir+=/lower2,datadir+=/data3.

Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegsr3A4YgF2YBevWa6n3=AcP7hNndG6EPMu3ncvV-AM71A@mail.gmail.com/


Fixes: b36a5780 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

Pull xfs fixes from Chandan Babu:

 - Fix calculation of offset of AG's last block and its length

 - Update incore AG block count when shrinking an AG

 - Process free extents to busy list in FIFO order

 - Make XFS report its i_version as the STATX_CHANGE_COOKIE

* tag 'xfs-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: reinstate the old i_version counter as STATX_CHANGE_COOKIE
  xfs: Remove duplicate include
  xfs: correct calculation for agend and blockcount
  xfs: process free extents to busy list in FIFO order
  xfs: adjust the incore perag block_count when shrinking

Before commit b36a5780 ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().

In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:

  none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0

which results in broken output of the mount utility:

  none on /mnt type overlay (rw,relatime,lowerdir=l)

Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.

Fixes: b36a5780 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>

Pull input fixes from Dmitry Torokhov:

 - a reworked way for handling reset delay on SMBus-connected Synaptics
   touchpads (the original one, while being correct, uncovered an old
   bug in fallback to PS/2 code that was fixed separately; the new one
   however avoids having delay in serio port "fast" resume, and instead
   has the wait in the RMI4 code)

 - a fix for potential crashes when devices with Elan controllers (and
   Synaptics) fall back to PS/2 code. Can't be hit without the original
   patch above, but still good to have it fixed

 - a couple new device IDs in xpad Xbox driver

 - another quirk for Goodix driver to deal with stuff vendors put in
   ACPI tables

 - a fix for use-after-free on disconnect for powermate driver

 - a quirk to not initialize PS/2 mouse port on Fujitsu Lifebook E5411
   laptop as it makes keyboard not usable and the device uses
   hid-over-i2c touchpad anyways

* tag 'input-for-v6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: powermate - fix use-after-free in powermate_config_complete
  Input: xpad - add PXN V900 support
  Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
  Input: psmouse - fix fast_reconnect function for PS/2 mode
  Revert "Input: psmouse - add delay when deactivating for SMBus mode"
  Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case
  Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table
  Input: xpad - add HyperX Clutch Gladiate Support

syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct.  When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.

Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.

[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e



Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reported-by:  <syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com


Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.

Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de>
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora


Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.

SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.

Note that originally the delay was added to psmouse driver in
92e24e0e ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.

Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin


Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.

The issue was uncovered when in 92e24e0e ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.

Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.

Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jeffery Miller <jefferymiller@google.com>
Fixes: bf232e46 ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com


Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull SCSI fix from James Bottomley:
 "A single tiny fix in the ufs driver core correcting the reversed logic
  in an error message"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Correct clear TM error log

Pull ceph fixes from Ilya Dryomov:
 "Fixes for an overreaching WARN_ON, two error paths and a switch to
  kernel_connect() which recently grown protection against someone using
  BPF to rewrite the address.

  All but one marked for stable"

* tag 'ceph-for-6.6-rc6' of https://github.com/ceph/ceph-client:
  ceph: fix type promotion bug on 32bit systems
  libceph: use kernel_connect()
  ceph: remove unnecessary IS_ERR() check in ceph_fname_to_usr()
  ceph: fix incorrect revoked caps assert in ceph_fill_file_size()

Pull ACPI fixes from Rafael Wysocki:
 "Add an ACPI EC GPE detection quirk for HP Pavilion Gaming 15-dk1xxx
  and ACPI IRQ override quirks for TongFang GM6BGEQ, GM6BG5Q and
  GM6BG0Q, and for ASUS ExpertBook B1402CBA (Hans de Goede).

* tag 'acpi-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Add TongFang GM6BGEQ, GM6BG5Q and GM6BG0Q to irq1_edge_low_force_override[]
  ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxx
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA

Pull RISC-V fixes from Palmer Dabbelt:

 - A handful of build fixes

 - A fix to avoid mixing up user/kernel-mode breakpoints, which can
   manifest as a hang when mixing k/uprobes with other breakpoint
   sources

 - A fix to avoid double-allocting crash kernel memory

 - A fix for tracefs syscall name mangling, which was causing syscalls
   not to show up in tracefs

 - A fix to the perf driver to enable the hw events when selected, which
   can trigger a BUG on some userspace access patterns

* tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  drivers: perf: Fix panic in riscv SBI mmap support
  riscv: Fix ftrace syscall handling which are now prefixed with __riscv_
  RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK
  riscv: kdump: fix crashkernel reserving problem on RISC-V
  riscv: Remove duplicate objcopy flag
  riscv: signal: fix sigaltstack frame size checking
  riscv: errata: andes: Makefile: Fix randconfig build issue
  riscv: Only consider swbp/ss handlers for correct privileged mode
  riscv: kselftests: Fix mm build by removing testcases subdirectory

Pull soundwire fix from Vinod Koul:
 "A single fix for making sdw bus irq conditionally built"

* tag 'soundwire-6.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: bus: Make IRQ handling conditionally built

Pull dmaengine fixes from Vinod Koul:
 "Driver fixes for:

   - stm32 dma residue calculation and chaining

   - stm32 mdma for setting inflight bytes, residue calculation and
     resume abort

   - channel request, channel enable and dma error in fsl_edma

   - runtime pm imbalance in ste_dma40 driver

   - deadlock fix in mediatek driver"

* tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: fsl-edma: fix all channels requested when call fsl_edma3_xlate()
  dmaengine: stm32-dma: fix residue in case of MDMA chaining
  dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
  dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is set
  dmaengine: stm32-mdma: use Link Address Register to compute residue
  dmaengine: stm32-mdma: abort resume if no ongoing transfer
  dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
  dmaengine: mediatek: Fix deadlock caused by synchronize_irq()
  dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq
  dmaengine: fsl-edma: fix edma4 channel enable failure on second attempt
  dt-bindings: dmaengine: zynqmp_dma: add xlnx,bus-width required property
  dmaengine: fsl-dma: fix DMA error when enabling sg if 'DONE' bit is set

Pull media fixes from Mauro Carvalho Chehab:

 - a core fix: Don't report V4L2_SUBDEV_CAP_STREAMS when API is disabled

 - ipu-bridge: Add a missing acpi_dev_put()

 - ov8858: fix driver for probe to work after 6.6-rc1

 - xilinx-vipp: fix async notifier logic

* tag 'media/v6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: i2c: ov8858: Don't set fwnode in the driver
  media: ipu-bridge: Add missing acpi_dev_put() in ipu_bridge_get_ivsc_acpi_dev()
  media: xilinx-vipp: Look for entities also in waiting_list
  media: subdev: Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled

Merge ACPI EC driver and ACPI resources handlig changes for 6.6-rc6:

 - Add EC GPE fixup quirk for HP Pavilion Gaming 15-dk1xxx (Hans de
   Goede).

 - Add ACPI IRQ override quirks for TongFang GM6BGEQ, GM6BG5Q and
   GM6BG0Q, and for ASUS ExpertBook B1402CBA (ans de Goede).

* acpi-ec:
  ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxx

* acpi-resource:
  ACPI: resource: Add TongFang GM6BGEQ, GM6BG5Q and GM6BG0Q to irq1_edge_low_force_override[]
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBA

Pull drm fixes from Dave Airlie:
 "Weekly fixes, the core is msm and amdgpu with some scattered fixes
  across vmwgfx, panel and the core stuff.

  atomic-helper:
   - Relax checks for unregistered connectors

  dma-buf:
   - Work around race condition when retrieving fence timestamp

  gem:
   - Avoid OOB access in BO memory range

  panel:
   - boe-tv101wun-ml6: Fix flickering

  simpledrm:
   - Fix error output

  vwmgfx:
   - Fix size calculation in texture-state code
   - Ref GEM BOs in surfaces

  msm:
   - PHY/link training reset fix
   - msm8998 - correct highest bank bit
   - skip video mode if timing engine disabled
   - check irq_of_parse_and_map return code
   - add new lines to some prints
   - fail atomic check for max mdp clk test

  amdgpu:
   - Seamless boot fix
   - Fix TTM BO resource check
   - SI fix for doorbell handling"

* tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm:
  drm/tiny: correctly print `struct resource *` on error
  drm: Do not overrun array in drm_gem_get_pages()
  drm/atomic-helper: relax unregistered connector check
  drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term
  drm/amdgpu: fix SI failure due to doorbells allocation
  drm/amdgpu: add missing NULL check
  drm/amd/display: Don't set dpms_off for seamless boot
  drm/vmwgfx: Keep a gem reference to user bos in surfaces
  drm/vmwgfx: fix typo of sizeof argument
  drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
  dma-buf: add dma_fence_timestamp helper
  drm/msm/dp: Add newlines to debug printks
  drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
  drm/msm/dsi: fix irq_of_parse_and_map() error checking
  drm/msm/dsi: skip the wait for video mode done if not applicable
  drm/msm/mdss: fix highest-bank-bit for msm8998
  drm/msm/dp: do not reinitialize phy unless retry during link training

Fix new smatch warnings:
fs/smb/server/smb2pdu.c:6131 smb2_read_pipe() error: double free of 'rpc_resp'

Fixes: e2b76ab8 ("ksmbd: add support for read compound")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Coverity Scan report the following one. This report is a false alarm.
Because fp is never NULL when rc is zero. This patch add null check for fp
in ksmbd_update_fstate to make alarm silence.

*** CID 1568583b:  Null pointer dereferences  (FORWARD_NULL)
/fs/smb/server/smb2pdu.c: 3408 in smb2_open()
3402                    path_put(&path);
3403                    path_put(&parent_path);
3404            }
3405            ksmbd_revert_fsids(work);
3406     err_out1:
3407            if (!rc) {
>>>     CID 1568583b:  Null pointer dereferences  (FORWARD_NULL)
>>>     Passing null pointer "fp" to "ksmbd_update_fstate", which dereferences it.
3408                    ksmbd_update_fstate(&work->sess->file_table, fp, FP_INITED);
3409                    rc = ksmbd_iov_pin_rsp(work, (void *)rsp, iov_len);
3410            }
3411            if (rc) {
3412                    if (rc == -EINVAL)
3413                            rsp->hdr.Status = STATUS_INVALID_PARAMETER;

Fixes: e2b76ab8 ("ksmbd: add support for read compound")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

set_smb2_rsp_status() after __process_request() sets the wrong error
status. This patch resets all iov vectors and sets the error status
on clean one.

Fixes: e2b76ab8 ("ksmbd: add support for read compound")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Cthon test fail with the following error.

check for proper open/unlink operation
nfsjunk files before unlink:
  -rwxr-xr-x 1 root root 0  9월 25 11:03 ./nfs2y8Jm9
./nfs2y8Jm9 open; unlink ret = 0
nfsjunk files after unlink:
  -rwxr-xr-x 1 root root 0  9월 25 11:03 ./nfs2y8Jm9
data compare ok
nfsjunk files after close:
  ls: cannot access './nfs2y8Jm9': No such file or directory
special tests failed

Cthon expect to second unlink failure when file is already unlinked.
ksmbd can not allow to open file if flags of ksmbd inode is set with
S_DEL_ON_CLS flags.

Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'amd-drm-fixes-6.6-2023-10-11' of https://gitlab.freedesktop.org/agd5f/linux

 into drm-fixes

amd-drm-fixes-6.6-2023-10-11:

amdgpu:
- Seemless boot fix
- Fix TTM BO resource check
- SI fix for doorbell handling

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012025637.7783-1-alexander.deucher@amd.com

Fixes for v6.6-rc5

- fix to not reset the PHY everytime we start link training but only
  do it if link training fails. Without this, the PLL unlocked
  interrupt fires causing "Unexpected DP AUX IRQ 0x01000000 when
  not busy" spam in the logs since last 2-3 cycles
- correct the highest bank bit to match downstream device tree for
  msm8998
- skip the video mode wait if the timing engine is not enabled. This
  was introduced after pre_enable flag for DSI video mode panels
  where we would end up waiting for the video mode done interrupt
  even before enabling timing engine causing error spam and long
  bootup times.
- check the correct return code of irq_of_parse_and_map() in DSI code
- avoid overflow issues in the dpu bandwidth calculation . This was
  exposed for high resolution displays and a critical fix to avoid
  atomic_check failure
- minor fix to add new lines in DP print messages.
- Fix to fail atomic_check() if the resolution exceeds max mdp clk.
  This leads to underflow otherwise if we try to allow that frame.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-HNxQ=VBtZ8geGzYJum9jtManEdbvhcjo_WWF_J9Ziw@mail.gmail.com

Pull power supply fixes from Sebastian Reichel:

 - qcom_battmgr: endianness fixes

* tag 'for-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: qcom_battmgr: fix enable request endianness
  power: supply: qcom_battmgr: fix battery_id type

Pull block fix from Jens Axboe:
 "Just a single fix for a longstanding regression with using fallocate
  on a block device"

* tag 'block-6.6-2023-10-12' of git://git.kernel.dk/linux:
  block: Don't invalidate pagecache for invalid falloc modes

Short summary of fixes pull:

 * atomic-helper: Relax checks for unregistered connectors
 * dma-buf: Work around race condition when retrieving fence timestamp
 * gem: Avoid OOB access in BO memory range
 * panel:
   * boe-tv101wun-ml6: Fix flickering
 * simpledrm: Fix error output
 * vwmgfx:
   * Fix size calculation in texture-state code
   * Ref GEM BOs in surfaces

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012111638.GA25037@linux-uq9g

Pull cgroup fixes from Tejun Heo:

 - In cgroup1, the `tasks` file could have duplicate pids which can
   trigger a warning in seq_file. Fix it by removing duplicate items
   after sorting

 - Comment update

* tag 'cgroup-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Fix incorrect css_set_rwsem reference in comment
  cgroup: Remove duplicates in cgroup v1 tasks file

Pull workqueue fixes from Tejun Heo:

 - Fix access-after-free in pwq allocation error path

 - Implicitly ordered unbound workqueues should lose the implicit
   ordering if an attribute change which isn't compatible with ordered
   operation is requested. However, attribute changes requested through
   the sysfs interface weren't doing that leaving no way to override the
   implicit ordering through the sysfs interface. Fix it.

 - Other doc and misc updates

* tag 'wq-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix -Wformat-truncation in create_worker
  workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()
  workqueue: Use the kmem_cache_free() instead of kfree() to release pwq
  workqueue: doc: Fix function and sysfs path errors
  workqueue: Fix UAF report by KASAN in pwq_release_workfn()