sk->sk_data_ready() of sctp socket can be called from both BH and non-BH
contexts, but the default sk->sk_data_ready(), sock_def_readable(), can
not be used in this case. Therefore, we have to make a new function
sctp_data_ready() to grab sk->sk_data_ready() with BH disabling.

=========================================================
[ INFO: possible irq lock inversion dependency detected ]
2.6.33-rc6 #129
---------------------------------------------------------
sctp_darn/1517 just changed the state of lock:
 (clock-AF_INET){++.?..}, at: [<c06aab60>] sock_def_readable+0x20/0x80
but this lock took another, SOFTIRQ-unsafe lock in the past:
 (slock-AF_INET){+.-...}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
1 lock held by sctp_darn/1517:
 #0:  (sk_lock-AF_INET){+.+.+.}, at: [<cdfe363d>] sctp_sendmsg+0x23d/0xc00 [sctp]

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts two commits:

fda48a0d
tcp: bind() fix when many ports are bound

and a follow-on fix for it:

6443bb1f


ipv6: Fix inet6_csk_bind_conflict()

It causes problems with binding listening sockets when time-wait
sockets from a previous instance still are alive.

It's too late to keep fiddling with this so late in the -rc
series, and we'll deal with it in net-next-2.6 instead.

Signed-off-by: David S. Miller <davem@davemloft.net>

Re-submitted based on comments from netdev community.
Summary of the changes:
1. Improved error handling.
2. Added the missing timeout arguments to usb_control_msg().

The following is a new Linux driver which exposes certain models of Sierra
Wireless modems to the operating system as Network Interface Cards (NICs).

This driver requires a version of the sierra.c driver which supports
blacklisting to work properly. The blacklist in sierra.c rejects the interfaces
claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts
(i.e. whitelists) the interface(s) used for USB-to-WWAN traffic.
The version of sierra.c which supports blacklisting is
available from the sierra wireless knowledge base page for older kernels. It is
also available in Linux kernel starting from version 2.6.31.

This driver works with all Sierra Wireless devices configured with PID=68A3
like USB305, USB306 provided the corresponding firmware version is I2.0
(for USB305) or M3.0 (for USB306) and later.
This driver will not work with earlier firmware versions than the ones shown
above. In this case the driver will issue an error message indicating
incompatibility and will not serve the device's USB-to-WWAN interface.

Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c.
A series of hook functions are provided in sierra_net.c which are called by
usbnet.c in response to a particular condition such as receipt or transmission
of a data packet. As such, usbnet.c does most of the work of making
a modem appear to the system as a network device and for properly exchanging
traffic between the USB subsystem and the Network card interface.
Sierra_net.c is concerned with managing the data exchanged between the
USB-to-WWAN interface and the upper layers of the operating system.

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Rory Filer <rfiler@sierrawireless.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Autosuspend works until you bring the wwan interface up, then the
device does not enter autosuspend anymore.

The following patch fixes the problem by setting the .manage_power
field in the mbm_info struct to the same as in the cdc_info struct
(cdc_manager_power).

Signed-off-by: Torgny Johansson <torgny.johansson@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2cap_create_connless_pdu() can sometimes return ERR_PTR(-ENOMEM) or
ERR_PTR(-EFAULT).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When gracefully stopping the controller, the driver was continuing if
*either* RX or TX had stopped.  We need to wait for both, or the
controller could get into an invalid state.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The calls to usb_free_buffer() dereference rx_urb and tx_urb in the
parameter list but those could be NULL.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: L. Alberto Giménez <agimenez@sysvalve.es>
Signed-off-by: David S. Miller <davem@davemloft.net>

smc91c92_cs:
  * spin_unlock_irqrestore before calling smc_interrupt() in media_check()
     to avoid lockup.
  * use spin_lock_irqsave for ethtool function.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

akpm: reluctantly typed in from
https://bugzilla.kernel.org/show_bug.cgi?id=15599



Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bonding driver calls ndo_vlan_rx_register() while holding bond->lock.
The bnx2 driver calls bnx2_netif_stop() to stop the rx handling while
changing the vlgrp.  The call also stops the cnic driver which sleeps
while the bond->lock is held and cause the warning.

This code path only needs to stop the NAPI rx handling while we are
changing the vlgrp.  Since no reset is going to occur, there is no need
to stop cnic in this case.  By adding a parameter to bnx2_netif_stop()
to skip stopping cnic, we can avoid the warning.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It has been reported that under certain heavy traffic conditions in MSI-X
mode, the driver can lose an MSI-X vector causing all packets in the
associated rx/tx ring pair to be dropped.  The problem is caused by
the chip dropping the write to unmask the MSI-X vector by the kernel
(when migrating the IRQ for example).

This can be prevented by increasing the GRC timeout value for these
register read and write operations.

Thanks to Dell for helping us debug this problem.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some Power7 platforms, when using VIOS (Virtual I/O Server), we
need to wait longer for control packets to finish transfer during
initialization.
Without this change, initialization may fail prematurely.

Signed-off-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prompted by a previous patch submitted by Matthew Garret <mjg@redhat.com>,
further digging into errata documentation reveals the current enabling or
disabling of ASPM L0s and L1 states for certain parts supported by this
driver are incorrect.  82571 and 82572 should always disable L1.  For
standard frames, 82573/82574/82583 can enable L1 but L0s must be disabled,
and for jumbo frames 82573/82574 must disable L1.  This allows for some
parts to enable L1 in certain configurations leading to better power
savings.

Also according to the same errata, Early Receive (ERT) should be disabled
on 82573 when using jumbo frames.

Cc: Matthew Garret <mjg@redhat.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PHY laser is still on during driver init.  It's allowing
garbage to hit our FIFO, which eventually can cause the entire
device to die.  Power down the laser while setting up the device,
and re-enable the laser before getting link.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

78f1cd02

 ("fix broken register writes")
does not work for Al Viro's r8169 (XID 18000000).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Few (6) network drivers enable mwi explicitly. Fewer worry about a
failure.

It is not a fix but it should avoid some annoyance like
http://bugzilla.kernel.org/show_bug.cgi?id=15454



Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Conrad Kostecki <conikost@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even with commit 32dec5dd

 ("bridge
br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only
without IGMP snooping."), BR_INPUT_SKB_CB(skb)->mrouters_only is
not appropriately initialized if IGMP snooping support is
compiled and disabled, so we can see garbage.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trying to run izlisten (from lowpan-tools tests) on a device that does not
exists I got the oops below. The problem is that we are using get_dev_by_name
without checking if we really get a device back. We don't in this case and
writing to dev->type generates this oops.

[Oops code removed by Dmitry Eremin-Solenikov]

If possible this patch should be applied to the current -rc fixes branch.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Fix INTx fallback when MSI fails

MSI setup changes the value of irq_vec in struct tg3 *tp.
This attribute must be taken into account and restored before
we try to do a new request_irq for INTx fallback.

In powerpc, the original code was leading to an EINVAL return within
request_irq, because the driver was trying to use the disabled MSI
virtual irq number instead of tp->pdev->irq.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit fda48a0d

 (tcp: bind() fix when many ports are bound)
introduced a bug on IPV6 part.
We should not call ipv6_addr_any(inet6_rcv_saddr(sk2)) but
ipv6_addr_any(inet6_rcv_saddr(sk)) because sk2 can be IPV4, while sk is
IPV6.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nothing stops the workqueue being left to run in parallel with close or a
few other operations. This causes double unmaps and the like.

See kerneloops.org #1041230 for an example

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gianfar driver may pass NULL pointer to the of_translate_address(),
which may lead to a kernel oops. Fix this by using of_iomap(), which
is also much simpler and shorter.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Old P1020RDB device trees were not specifing tbipa address for
MDIO nodes, which is now causing this kernel oops:

 ...
 eth2: TX BD ring size for Q[6]: 256
 eth2: TX BD ring size for Q[7]: 256
 Unable to handle kernel paging request for data at address 0x00000000
 Faulting instruction address: 0xc0015504
 Oops: Kernel access of bad area, sig: 11 [#1]
 ...
 NIP [c0015504] memcpy+0x3c/0x9c
 LR [c000a9f8] __of_translate_address+0xfc/0x21c
 Call Trace:
 [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable)
 [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0
 ...

The old device trees are buggy, though having a dead ethernet is
better than a dead kernel, so fix the issue by using of_iomap().

Also, a somewhat similar issue exist in the probe() routine, though
there the oops is only a possibility. Nonetheless, fix it too.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Port autoselection done by kernel only works when number of bound
sockets is under a threshold (typically 30000).

When this threshold is over, we must check if there is a conflict before
exiting first loop in inet_csk_get_port()

Change inet_csk_bind_conflict() to forbid two reuse-enabled sockets to
bind on same (address,port) tuple (with a non ANY address)

Same change for inet6_csk_bind_conflict()

Reported-by: Gaspar Chilingarov <gasparch@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the original code, the "goto out" calls "rdma_destroy_id(cm_id);"
That isn't needed here and would cause problems because "cm_id" is an
ERR_PTR.  The new code just returns directly.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the original code, if rtnl_create_link() returned an ERR_PTR then that
would get passed to rtnl_configure_link() which dereferences it.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The issue raises when having 2 NICs both assigned the same
IPv6 global address.

If a sender binds to a particular NIC (SO_BINDTODEVICE),
the outgoing traffic is being sent via the first found.
The bonded device is thus not taken into an account during the
routing.

From the ip6_route_output function:

If the binding address is multicast, linklocal or loopback,
the RT6_LOOKUP_F_IFACE bit is set, but not for global address.

So binding global address will neglect SO_BINDTODEVICE-binded device,
because the fib6_rule_lookup function path won't check for the
flowi::oif field and take first route that fits.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Scott Otto <scott.otto@alcatel-lucent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: allow to send packet after receiving ICMPv6 Too Big message with MTU field less than IPV6_MIN_MTU

According to RFC2460, PMTU is set to the IPv6 Minimum Link
MTU (1280) and a fragment header should always be included
after a node receiving Too Big message reporting PMTU is
less than the IPv6 Minimum Link MTU.

After receiving a ICMPv6 Too Big message reporting PMTU is
less than the IPv6 Minimum Link MTU, sctp *can't* send any
data/control chunk that total length including IPv6 head
and IPv6 extend head is less than IPV6_MIN_MTU(1280 bytes).

The failure occured in p6_fragment(), about reason
see following(take SHUTDOWN chunk for example):
sctp_packet_transmit (SHUTDOWN chunk, len=16 byte)
|------sctp_v6_xmit (local_df=0)
   |------ip6_xmit
       |------ip6_output (dst_allfrag is ture)
           |------ip6_fragment

In ip6_fragment(), for local_df=0, drops the the packet
and returns EMSGSIZE.

The patch fixes it with adding check length of skb->len.
In this case, Ipv6 not to fragment upper protocol data,
just only add a fragment header before it.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new driver to use tethering with an iPhone device. After initial submission,
apply fixes to fit the new driver into the kernel standards.

There are still a couple of minor (almost cosmetic-level) issues, but the driver
is fully functional right now.

Signed-off-by: L. Alberto Giménez <agimenez@sysvalve.es>
Signed-off-by: Diego Giagio <diego@giagio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I encountered an issue that not to link up on cxgb3 fabric.
I bisected and found that this regression was introduced by
0f07c4ee

.

Correct to pass phy_addr to cphy_init() at t3_xaui_direct_phy_prep().

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1, An X25 program binds and listens
2, calls arrive waiting to be accepted
3, Program exits without accepting
4, Sockets time out but don't get correctly cleaned up
5, cat /proc/net/x25/socket shows the dead sockets with bad inode fields.

This line borrowed from AX25 sets the dying socket so the timers clean up later.

Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix NULL pointer dereference in ks8851_tx_work by checking if dequeued
list is already empty before writing the packet to TX FIFO

 Unable to handle kernel NULL pointer dereference at virtual address 00000050
 PC is at ks8851_tx_work+0xdc/0x1b0
 LR is at wait_for_common+0x148/0x164
 pc : [<c01c0df4>]    lr : [<c025a980>]    psr: 20000013
 Backtrace:
  ks8851_tx_work+0x0/0x1b0
  worker_thread+0x0/0x190
  kthread+0x0/0x90

Signed-off-by: Abraham Arce <x0066660@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the stats counter calculation in 3c574_cs, similar
to the method used in 3c589_cs. This corrects the contents
of the counter on tests using a "Megahertz 574B" card.

[linux@dominikbrodowski.net: clean up commit message]
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building a bundle, we set dst.dev and rt6.rt6i_idev.
We must ensure to set the same device for both fields.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ems_usb_probe(), a pointer is dereferenced after making sure it is NULL...

This patch replaces netdev->dev.parent with &intf->dev in dev_err() calls to
avoid this.

Signed-off-by: "Hans J. Koch" <hjk@linutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following RCU warning in dev_pick_tx():

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
net/core/dev.c:1993 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by swapper/0:
 #0:  (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff81039e65>] run_timer_softirq+0x17b/0x278
 #1:  (rcu_read_lock_bh){.+....}, at: [<ffffffff812ea3eb>] dev_queue_xmit+0x14e/0x4dc

stack backtrace:
Pid: 0, comm: swapper Not tainted 2.6.34-rc5-cachefs #4
Call Trace:
 <IRQ>  [<ffffffff810516c4>] lockdep_rcu_dereference+0xaa/0xb2
 [<ffffffff812ea4f6>] dev_queue_xmit+0x259/0x4dc
 [<ffffffff812ea3eb>] ? dev_queue_xmit+0x14e/0x4dc
 [<ffffffff81052324>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff81035362>] ? local_bh_enable_ip+0xbc/0xc1
 [<ffffffff812f0954>] neigh_resolve_output+0x24b/0x27c
 [<ffffffff8134f673>] ip6_output_finish+0x7c/0xb4
 [<ffffffff81350c34>] ip6_output2+0x256/0x261
 [<ffffffff81052324>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff813517fb>] ip6_output+0xbbc/0xbcb
 [<ffffffff8135bc5d>] ? fib6_force_start_gc+0x2b/0x2d
 [<ffffffff81368acb>] mld_sendpack+0x273/0x39d
 [<ffffffff81368858>] ? mld_sendpack+0x0/0x39d
 [<ffffffff81052099>] ? mark_held_locks+0x52/0x70
 [<ffffffff813692fc>] mld_ifc_timer_expire+0x24f/0x288
 [<ffffffff81039ed6>] run_timer_softirq+0x1ec/0x278
 [<ffffffff81039e65>] ? run_timer_softirq+0x17b/0x278
 [<ffffffff813690ad>] ? mld_ifc_timer_expire+0x0/0x288
 [<ffffffff81035531>] ? __do_softirq+0x69/0x140
 [<ffffffff8103556a>] __do_softirq+0xa2/0x140
 [<ffffffff81002e0c>] call_softirq+0x1c/0x28
 [<ffffffff81004b54>] do_softirq+0x38/0x80
 [<ffffffff81034f06>] irq_exit+0x45/0x47
 [<ffffffff810177c3>] smp_apic_timer_interrupt+0x88/0x96
 [<ffffffff810028d3>] apic_timer_interrupt+0x13/0x20
 <EOI>  [<ffffffff810488dd>] ? __atomic_notifier_call_chain+0x0/0x86
 [<ffffffff810096bf>] ? mwait_idle+0x6e/0x78
 [<ffffffff810096b6>] ? mwait_idle+0x65/0x78
 [<ffffffff810011cb>] cpu_idle+0x4d/0x83
 [<ffffffff81380b05>] rest_init+0xb9/0xc0
 [<ffffffff81380a4c>] ? rest_init+0x0/0xc0
 [<ffffffff8168dcf0>] start_kernel+0x392/0x39d
 [<ffffffff8168d2a3>] x86_64_start_reservations+0xb3/0xb7
 [<ffffffff8168d38b>] x86_64_start_kernel+0xe4/0xeb

An rcu_dereference() should be an rcu_dereference_bh().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

My recent patch to remove the open-coded checksum sequence in
tcp_v6_send_response broke it as we did not set the transport
header pointer on the new packet.

Actually, there is code there trying to set the transport
header properly, but it sets it for the wrong skb ('skb'
instead of 'buff').

This bug was introduced by commit
a8fdf2b3

 ("ipv6: Fix
tcp_v6_send_response(): it didn't set skb transport header")

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

grec_nsrcs is in network order, we should convert to host horder in
br_multicast_igmp3_report()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>