Merge tag 'imx-defconfig-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig

The i.MX defconfig updates for 4.3:
 - Enable i.MX6UL SoC build
 - Enable powerkey and syscon poweroff support
 - Build in multi-channel audio support, including i.MX ASRC and CS42xx8
   codec drivers.
 - Enable kexec build, HCIUART_H4 and IKCONFIG_PROC support.

* tag 'imx-defconfig-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux

:
  ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC
  ARM: imx: imx_v6_v7_defconfig enable imx6ul support
  ARM: imx_v6_v7_defconfig: enable powerkey and syscon power off
  ARM: imx_v6_v7_defconfig: Select HCIUART_H4
  ARM: imx_v6_v7_defconfig: build in audio driver
  ARM: imx_v6_v7_defconfig: Enable kexec support

Signed-off-by: Olof Johansson <olof@lixom.net>

CONFIG_ARM_AT91_ETHER doesn't exist anymore, both drivers have been merged
in the macb driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds drm atmel lcdc, simple panel and backlight options.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig

Allwinner defconfig changes for 4.3

Two patches that enable various Allwinner related drivers drivers both in
sunxi_defconfig and in multi_v7_defconfig

* tag 'sunxi-defconfig-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux

:
  ARM: multi_v7_defconfig: Enable Allwinner P2WI, PWM, DMA_SUN6I, cryptodev
  ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE

Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu config changes for v4.3 (part #2)

Improve dt support for orion5x

* tag 'mvebu-config-4.3-2' of git://git.infradead.org/linux-mvebu

:
  ARM: defconfig: orion5x: add DT support

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-defconfig-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm into next/defconfig

Qualcomm ARM Based defconfig Updates for v4.3

* Enable KS8851 for QCOM SoCs in qcom defconfig

* tag 'qcom-defconfig-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm

:
  ARM: qcom_defconfig: Enable options for KS8851 ethernet

Signed-off-by: Olof Johansson <olof@lixom.net>

Add Atmel-isi and ov2640 driver in defconfig

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: make SOC_CAMERA_OV2640 selected as a module]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-defconfig2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Second Round of Renesas ARM Based SoC Defconfig Updates for v4.3

* Enable fixed voltage regulator in shmobile_defconfig

* tag 'renesas-defconfig2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>

Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and
sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security
System) drivers by default. EXTCON is needed by the updated sun4i USB
PHY driver.

While at it, enable FHANDLE, which is needed by systemd and newer
versions of udev. Also enable CGROUPS for systemd.

And get rid of POWER_RESET, as the sun6i power reset driver has been
removed in favor of proper sun6i watchdog support.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

This is selected by MACH_MARZEN which is enabled in shmobile_defconfig,
however, MACH_MARZEN is going away along with the board code it enables.

Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Let MX6UL and MX7D SoCs be selected by default.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'prima2-defconfig-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/defconfig

Merge "CSR prima2_defconfig fixes for 4.2" from Barry Song:

enable SiRFSoC device drivers in CSR prima2_defconfig

make savedefconfig at first, then enable
1. sdhci driver
2. onkey
3. rtc
4. hwspinlock
for prima2_defconfig

* tag 'prima2-defconfig-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux

:
  ARM: prima2_defconfig: enable build for hwspinlock
  ARM: prima2_defconfig: enable build for RTC
  ARM: prima2_defconfig: enable build for misc input
  ARM: prima2_defconfig: enable build for SiRFSoC SDHC host
  ARM: prima2_defconfig: fix the outdated defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>

This patch enables hardware spinlock driver for CSRatlas7 platforms.

Signed-off-by: Barry Song <Baohua.Song@csr.com>

This patch enables RTC_CLASS and RTC driver for SiRFSoC platforms.

Signed-off-by: Barry Song <Baohua.Song@csr.com>

we need INPUT_MISC to enable INPUT_SIRFSOC_ONKEY which is the onkey
driver for SiRFSoC platforms.

Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch enables the MMC/SDHCI driver for SiRFSoC platforms.

Signed-off-by: Barry Song <Baohua.Song@csr.com>

this patch is againest v4.2-rc1, by doing:

 $ make ARCH=arm prima2_defconfig
 $ make ARCH=arm savedefconfig
 $ cp defconfig arch/arm/configs/prima2_defconfig

Signed-off-by: Barry Song <Baohua.Song@csr.com>

It is useful to know how the kernel was configured via:
zcat /proc/config.gz ,so select the CONFIG_IKCONFIG_PROC option.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'renesas-defconfig-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Renesas ARM Based SoC Defconfig Updates for v4.3

* Remove marzen_defconfig
* shmobile_defconfig and multi_v7_defconfig
  - Enable DPCM Sound Card
  - Enable r8a7793/gose platform

* tag 'renesas-defconfig-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: shmobile: Remove marzen_defconfig
  ARM: multi_v7_defconfig: add Renesas DPCM Sound Card
  ARM: shmobile: defconfig: add Renesas DPCM Sound Card
  ARM: multi_v7_defconfig: Enable shmobile r8a7793/gose platform
  ARM: shmobile: Enable gose board in multiplatform defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sti-defconfig-for-v4.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/defconfig

STi defconfig for v4.3, round 1

Highlights:
-----------
 - Enable support ST's PWM driver in multi_v7
 - Enable support PWM regulator in multi_v7

* tag 'sti-defconfig-for-v4.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti

:
  ARM: multi_v7_defconfig: Enable support for PWM Regulators
  ARM: multi_v7_defconfig: Enable ST's PWM driver

Signed-off-by: Olof Johansson <olof@lixom.net>

- add 2 DT device entries
- enable CONFIG_ARM_ATAG_DTB_COMPAT

Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Enable the RPM and RPM regulator drivers as well as the KS8851
ethernet driver so that ethernet works on MSM8960 CDP.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

Merge tag 'omap-for-v4.3/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig

Merge "defconfig changes for v4.3" from Tony Lindgren:

Few defconfig changes for omap2plus_defconfig to enable
SPI NOR, CPTS, touchscreen and ADC used on am335x, am437x
and ra7 devices.

* tag 'omap-for-v4.3/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

:
  ARM: omap2plus_defconfig: enable support for M25P80 SPI NOR
  ARM: omap2plus_defconfig: enable support for TI CPTS
  ARM: omap2plus_defconfig: enable support for TI touchscreen
  ARM: omap2plus_defconfig: enable support for TI ADC

Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

Merge tag 'ep93xx-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig

Merge "EP93xx defconfig changes" from Linus Walleij:

This updates the EP93xx defconfig to use NO_HZ and high
resolution timers, and to by default enable and compile
all board variants now that we can have a single kernel,
and enable all EP93xx-specific drivers that sit in various
sites across the kernel.

* tag 'ep93xx-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator

:
  ARM: ep93xx: add framebuffer to the defconfig
  ARM: ep93xx: add DMA engine to the defconfig
  ARM: ep93xx: add GPIO I2C to defconfig
  ARM: ep93xx: add LEDs and triggers to defconfig
  ARM: ep93xx: enable SIM.ONE MMC/SD hardware
  ARM: ep93xx: enable all boards in the EP93xx defconfig
  ARM: ep93xx: activate NO_HZ and high-res timers

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: mvebu: config changes for v4.3" from Gregory Clement:

mvebu config changes for v4.3 (part #1)

update mvebu_v7_defconfig with features needed for Armada 388 GP

* tag 'mvebu-config-4.3-1' of git://git.infradead.org/linux-mvebu

:
  ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP

Signed-off-by: Olof Johansson <olof@lixom.net>

The EP93xx SoC has a framebuffer driver, let's add this to the
defconfig so we can have graphics working out of the box.

Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Several boards can make use of the DMA engine on the EP93xx
so let's enable this by default in the defconfig.

Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Some of the EP93xx boards have I2C devices on bit-banged GPIO
I2C, so add this to the defconfig.

Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The EP93xx has two designated LEDs (not always connected): a
green and a red one. These are registered in the core, so let's
enable the driver and some triggers.

Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The SIM.ONE has a MMC card connected to the SPI host. This card
usually hosts an EXT4 root file system. Enable these options in
the defconfig so the default ompiled kernel will work
out-of-the-box.

Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

With PATCH_PHYS_TO_VIRT we can support all EP93xx variants
in a single image, so enable all board variants in the defconfig
for simplicity and build coverage.

Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Let's set the EP93xx to NO_HZ mode and activate the high-res
timers now that we have GENERIC_CLOCKEVENTS.

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Now when the Marzen legacy board code is removed also
get rid of the marzen_defconfig file. Existing users
shall move over to shmobile_defconfig.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

M25P80 driver provides support for most common SPI NOR devices.
These devices are commonly found on TI EVMs for AM437x and DRA7x
SoCs.

Enable support for this driver in defconfig for omap2plus devices.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

CPTS module of CPSW IP enables timestamp synchronization
using PTP. Enable CPTS feature of CPSW driver.

Available on AM335x, AM437x and DRA7x SoCs.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable support for on-chip resistive touchscreen m found on AM335x and
AM437x devices.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable support for on-chip ADC found on AM335x and
AM437x devices.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>