- Jun 17, 2014
-
-
Simon Horman authored
Add Marzen and r8a7779 to CONFIG_SHMOBILE_MULTI. At this point CCF is not yet supported so you cannot run this code yet. For CCF support to happen several different components are needed, and this is one simple portion that moves us forward. Other patches need to build on top of this one. Marzen board support exists in 3 flavours: 1) SHMOBILE_MULTI, MACH_MARZEN - board-marzen-reference.c (CCF + DT) 2) SHMOBILE, MACH_MARZEN_REFERENCE - board-marzen-reference.c (DT) 3) SHMOBILE, MACH_MARZEN - board-marzen.c (legacy C code) When CCF is done then 2) will be removed. When 1) includes same features as 3) then 3) will be removed. Based on work for the Koelsch and r8a7791 by Magnus Damm. Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Move the clock initialisation and OF device population from SoC to board code. This is in keeping with the pattern used by Lager. And the clock portion is part of decoupling clock initialisation from SoC code in preparation for moving to the common clock framework. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
r8a7779_earlytimer_init() calls r8a7779_clock_init() and r8a7779_clock_init() is defined in clock-r8a7779.c. If both CONFIG_COMMON_CLK and CONFIG_ARCH_R8A7779 are enabled, as will be the case when marzen-reference moves to use the common clock framework, then setup-r8a7779.c is compiled but clock-r8a7779.c is not. As r8a7779_earlytimer_init() is not used by marzen-reference simply move it to clock-r8a7779.c. [horms+renesas@verge.net.au: rebase] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Add and use helper to read mode pins. This will be re-used when moving marzen-reference to the common clock framework. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Reference clocks using a "clocks" property in all nodes corresponding to devices that require a clock. Based on work by Laurent Pinchart for the r8a7790 and r8a7791 SoC. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
The external crystal frequency is 31.25 on the Marzen board. Specify it in the device tree. Based on work for the Lager board by Laurent Pinchart. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Copy the device nodes from Marzen reference into the Marzen device tree file. This will allow us to use a single DTS file regardless of kernel configuration. In case of legacy C board code the device nodes may or may not be used, but in the multiplatform case all the DT device nodes will be used. Based on a similar change for the Lager board by Laurent Pinchart. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Simon Horman authored
Declare all core and MSTP clocks currently used by r8a7779-based boards. Based on work by Laurent Pinchart for the r8a7790 and r8a7791 SoCs. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Change location of rcar-gen2.h so it can be used as #include "rcar-gen2.h" instead of the old style #include <mach/rcar-gen2.h>. Also clean up the r8a7790 case to follow the same style as r8a7791. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Change location of pm-rcar.h so it can be used as #include "pm-rcar.h" instead of the old style #include <mach/pm-rcar.h>. Also clean up the r8a7779 case to move some unused header file cruft into a C file. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Change location of pm-rmobile.h so it can be used as #include "pm-rmobile.h" instead of the old style #include <mach/pm-rmobile.h>. Also clean up the sh7372 and sh73a0 header files to get rid of unused include files. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Change location for common.h so it can be used as #include "common.h" instead of the old style #include <mach/common.h>. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Move most of irqs.h so it can be used as #include "irqs.h" instead of the old style #include <mach/irqs.h>. Legacy code in drivers/pinctrl needs more work to get rid of the "mach" portion of the include path, so some part is left in the original location. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> [horms+renesas@verge.net.au: Do not add trailing blank line to irqs.h] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Change location of clock.h so it can be used as #include "clock.h" instead of the old style #include <mach/clock.h>. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Change location of dma-register.h so it can be used as #include "dma-register.h" instead of the old style #include <mach/dma-register.h>. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Magnus Damm authored
Change location of intc.h so it can be used as #include "intc.h" instead of the old style #include <mach/intc.h>. Also clean up some code to get rid of redundant #include <linux/sh_intc.h>. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
- Jun 08, 2014
-
-
Mark Charlebois authored
Patch to prevent warning of a buggy compiler when using clang and the ARM_UNWIND option. Clang defines (at least on the current trunk) GNUC, GNUC_MINOR, and GNUC_PATCHLEVEL to 4, 2, and 1 respectively. This version of GCC gets flagged as buggy, but it isn't actually an issue with clang so the patch will do what it did before unless clang is defined and then it will not report the GCC version as an issue. Signed-off-by: Mark Charlebois <charlebm@gmail.com> Signed-off-by: Behan Webster <behanw@converseincode.com>
-
Behan Webster authored
With compilers which follow the C99 standard (like modern versions of gcc and clang), "extern inline" does the wrong thing (emits code for an externally linkable version of the inline function). "static inline" is the correct choice instead. Author: Behan Webster <behanw@converseincode.com> Signed-off-by: Behan Webster <behanw@converseincode.com> Reviewed-by: Mark Charlebois <charlebm@gmail.com>
-
- Jun 07, 2014
-
-
Joe Perches authored
This typedef is unnecessary and should just be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Boris BREZILLON authored
sam9x5 SoCs have the following errata: "RTC: Interrupt Mask Register cannot be used Interrupt Mask Register read always returns 0." Hence we should not rely on what IMR claims about already masked IRQs and just disable all IRQs. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by: Bryan Evenson <bevenson@melinkcorp.com> Reviewed-by: Johan Hovold <johan@hovold.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Bryan Evenson <bevenson@melinkcorp.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Roszko <mark.roszko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nishanth Menon authored
OMAP5432, DRA75x and DRA72x have MPU DPLLs that need Duty Cycle Correction(DCC) to operate safely at frequencies >= 1.4GHz. Switch to "ti,omap5-mpu-dpll-clock" compatible property which provides this support. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Andrii Tseglytskyi authored
Duty Cycle Correction(DCC) needs to be enabled if the MPU is to run at frequencies beyond 1.4GHz for OMAP5, DRA75x, DRA72x. MPU DPLL has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). For further information, See the note on OMAP5432 Technical Reference Manual(SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and also the "OMAP543x ES2.0 DM Operating Conditions Addendum v0.5" chapter 2.1 "Micro Processor Unit (MPU)". Equivalent information is present in relevant DRA75x, 72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Taras Kondratiuk <taras@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> [t-kristo@ti.com: added TRM / DM references for DCC clock rate] Signed-off-by: Tero Kristo <t-kristo@ti.com>
-
Linus Torvalds authored
Russell King points out that my ARM merge (commit eb3d3ec5) was broken wrt the arch/arm/mach-mvebu/board-v7.c file, leaving in a stale l2x0_of_init() call (it's now handled by the DT description). Which is kind of embarrassing, since I knew about it as it wasn't the only file that had similar merge issues. At least I got the other ones right. Reported-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- Jun 06, 2014
-
-
Santosh Shilimkar authored
Laura's series removed the meminfo structure and its no longer available. Update keystone code to remove the usage of it. Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- Jun 05, 2014
-
-
Vince Weaver authored
Make the ARM perf code use the new common PMU interrupt disabled code. This allows perf to work on ARM machines without a working PMU interrupt (for example, raspberry pi). Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> [peterz: applied changes suggested by Will] Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1405161712190.11099@vincent-weaver-1.umelst.maine.edu [ Small readability tweaks to the code. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Nicolas Pitre authored
It is better not to think about compute capacity as being equivalent to "CPU power". The upcoming "power aware" scheduler work may create confusion with the notion of energy consumption if "power" is used too liberally. This contains the architecture visible changes. Incidentally, only ARM takes advantage of the available pow^H^H^Hcapacity scaling hooks and therefore those changes outside kernel/sched/ are confined to one ARM specific file. The default arch_scale_smt_power() hook is not overridden by anyone. Replacements are as follows: arch_scale_freq_power --> arch_scale_freq_capacity arch_scale_smt_power --> arch_scale_smt_capacity SCHED_POWER_SCALE --> SCHED_CAPACITY_SCALE SCHED_POWER_SHIFT --> SCHED_CAPACITY_SHIFT The local usage of "power" in arch/arm/kernel/topology.c is also changed to "capacity" as appropriate. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linaro-kernel@lists.linaro.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Brown <broonie@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/n/tip-48zba9qbznvglwelgq2cfygh@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Naoya Horiguchi authored
Currently hugepage migration is available for all archs which support pmd-level hugepage, but testing is done only for x86_64 and there're bugs for other archs. So to avoid breaking such archs, this patch limits the availability strictly to x86_64 until developers of other archs get interested in enabling this feature. Simply disabling hugepage migration on non-x86_64 archs is not enough to fix the reported problem where sys_move_pages() hits the BUG_ON() in follow_page(FOLL_GET), so let's fix this by checking if hugepage migration is supported in vma_migratable(). Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- Jun 04, 2014
-
-
Arnd Bergmann authored
The prototype for mvebu_mbus_dt_init() changed around the same time as a new caller was added to orion5x. This adds the missing argument to make orion5x behave correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
- Jun 03, 2014
-
-
Jyri Sarha authored
Adds HDMI audio sDMA properties. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Jyri Sarha authored
Adds HDMI audio sDMA properties. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Florian Vaussard authored
Add the necessary DTS nodes to enable the micro-HDMI output on Parlor board. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Florian Vaussard authored
Alto35 expansion board has a ZIF connector for a 3.5'' LCD. Add a common include file for this configuration, and use it on Alto35. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Florian Vaussard authored
Chestnut43, Gallop43 and Palo43 expansion boards have a ZIF connector for a 4.3'' LCD. Add a common include file for this configuration, and use it on relevant expansion boards. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Florian Vaussard authored
Summit and Tobi expansion boards have a HDMI connector with a TFP410 encoder. Add a common include file for this configuration, and then use it for Summit and Tobi. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Looks like quite a few omap3 boards have sharp ls037v7dw01 that's configured as various panel dpi entries for whatever legacy reasons. For device tree based support, let's just configure these properly for panel ls037v7dw01 instead of panel dpi. This patch creates a common file for panel ls037v7dw01, and makes boards ldp and omap3-evm to use it. The ls037v7dw01 also seems to be coupled with an ad7846 touchscreen controller for the omaps, so let's add a basic configuration for the touchscreen also using the default values. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Marek Belisko authored
This patch add support for lcd display on gta04 board. Display control is connected to spi (used spi bitbang driver). Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
omap5-uevm has a single HDMI output. Add the necessary display information, including pinmuxing. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
omap5-uevm has a tca6424a I/O expander. Add it to the .dts file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Add OMAP5 DSS nodes to omap5.dtsi. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Add DT data for am43x-epos-evm's LCD panel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-