There is a spelling mistake in a printk message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a pr_warn message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a IP_VS_ERR_RL message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a hw_dbg message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported an out-of-bound access in em_nbyte. As initially
analyzed by Eric, this is because em_nbyte sets its own em->datalen
in em_nbyte_change() other than the one specified by user, but this
value gets overwritten later by its caller tcf_em_validate().
We should leave em->datalen untouched to respect their choices.

I audit all the in-tree ematch users, all of those implement
->change() set em->datalen, so we can just avoid setting it twice
in this case.

Reported-and-tested-by:  <syzbot+5af9a90dad568aa9f611@syzkaller.appspotmail.com>
Reported-by:  <syzbot+2f07903a5b05e7f36410@syzkaller.appspotmail.com>
Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Finn Thain says:

====================
Fixes for SONIC ethernet driver

Various SONIC driver problems have become apparent over the years,
including tx watchdog timeouts, lost packets and duplicated packets.

The problems are mostly caused by bugs in buffer handling, locking and
(re-)initialization code.

This patch series resolves these problems.

This series has been tested on National Semiconductor hardware (macsonic),
qemu-system-m68k (macsonic) and qemu-system-mips64el (jazzsonic).

The emulated dp8393x device used in QEMU also has bugs.
I have fixed the bugs that I know of in a series of patches at,
https://github.com/fthain/qemu/commits/sonic



Changed since v1:
 - Minor revisions as described in commit logs.
 - Deferred net-next patches.
Changed since v2:
 - Minor revisions as described in commit logs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Section 5.5.3.2 of the datasheet says,

    If FIFO Underrun, Byte Count Mismatch, Excessive Collision, or
    Excessive Deferral (if enabled) errors occur, transmission ceases.

In this situation, the chip asserts a TXER interrupt rather than TXDN.
But the handler for the TXDN is the only way that the transmit queue
gets restarted. Hence, an aborted transmission can result in a watchdog
timeout.

This problem can be reproduced on congested link, as that can result in
excessive transmitter collisions. Another way to reproduce this is with
a FIFO Underrun, which may be caused by DMA latency.

In event of a TXER interrupt, prevent a watchdog timeout by restarting
transmission.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Section 4.3.1 of the datasheet says,

    This bit [TXP] must not be set if a Load CAM operation is in
    progress (LCAM is set). The SONIC will lock up if both bits are
    set simultaneously.

Testing has shown that the driver sometimes attempts to set LCAM
while TXP is set. Avoid this by waiting for command completion
before and after giving the LCAM command.

After issuing the Load CAM command, poll for !SONIC_CR_LCAM rather than
SONIC_INT_LCD, because the SONIC_CR_TXP bit can't be used until
!SONIC_CR_LCAM.

When in reset mode, take the opportunity to reset the CAM Enable
register.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several issues relating to command register usage during
chip initialization.

Firstly, the SONIC sometimes comes out of software reset with the
Start Timer bit set. This gets logged as,

    macsonic macsonic eth0: sonic_init: status=24, i=101

Avoid this by giving the Stop Timer command earlier than later.

Secondly, the loop that waits for the Read RRA command to complete has
the break condition inverted. That's why the for loop iterates until
its termination condition. Call the helper for this instead.

Finally, give the Receiver Enable command after clearing interrupts,
not before, to avoid the possibility of losing an interrupt.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure the SONIC's DMA engine is idle before altering the transmit
and receive descriptors. Add a helper for this as it will be needed
again.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

As soon as the driver is finished with a receive buffer it allocs a new
one and overwrites the corresponding RRA entry with a new buffer pointer.

Problem is, the buffer pointer is split across two word-sized registers.
It can't be updated in one atomic store. So this operation races with the
chip while it stores received packets and advances its RRP register.
This could result in memory corruption by a DMA write.

Avoid this problem by adding buffers only at the location given by the
RWP register, in accordance with the National Semiconductor datasheet.

Re-factor this code into separate functions to calculate a RRA pointer
and to update the RWP.

Fixes: efcce839

 ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

After sonic_tx_timeout() calls sonic_init(), it can happen that
sonic_rx() will subsequently encounter a receive descriptor with no
flags set. Remove the comment that says that this can't happen.

When giving a receive descriptor to the SONIC, clear the descriptor
status field. That way, any rx descriptor with flags set can only be
a newly received packet.

Don't process a descriptor without the LPKT bit set. The buffer is
still in use by the SONIC.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The while loop in sonic_rx() traverses the rx descriptor ring. It stops
when it reaches a descriptor that the SONIC has not used. Each iteration
advances the EOL flag so the SONIC can keep using more descriptors.
Therefore, the while loop has no definite termination condition.

The algorithm described in the National Semiconductor literature is quite
different. It consumes descriptors up to the one with its EOL flag set
(which will also have its "in use" flag set). All freed descriptors are
then returned to the ring at once, by adjusting the EOL flags (and link
pointers).

Adopt the algorithm from datasheet as it's simpler, terminates quickly
and avoids a lot of pointless descriptor EOL flag changes.

Fixes: efcce839

 ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SONIC can sometimes advance its rx buffer pointer (RRP register)
without advancing its rx descriptor pointer (CRDA register). As a result
the index of the current rx descriptor may not equal that of the current
rx buffer. The driver mistakenly assumes that they are always equal.
This assumption leads to incorrect packet lengths and possible packet
duplication. Avoid this by calling a new function to locate the buffer
corresponding to a given descriptor.

Fixes: efcce839

 ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tx_aborted_errors statistic should count packets flagged with EXD,
EXC, FU, or BCM bits because those bits denote an aborted transmission.
That corresponds to the bitmask 0x0446, not 0x0642. Use macros for these
constants to avoid mistakes. Better to leave out FIFO Underruns (FU) as
there's a separate counter for that purpose.

Don't lump all these errors in with the general tx_errors counter as
that's used for tx timeout events.

On the rx side, don't count RDE and RBAE interrupts as dropped packets.
These interrupts don't indicate a lost packet, just a lack of resources.
When a lack of resources results in a lost packet, this gets reported
in the rx_missed_errors counter (along with RFO events).

Don't double-count rx_frame_errors and rx_crc_errors.

Don't use the general rx_errors counter for events that already have
special counters.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver accesses descriptor memory which is simultaneously accessed by
the chip, so the compiler must not be allowed to re-order CPU accesses.
sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should
have done so too but was overlooked.

Fixes: efcce839

 ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The chip can change a packet's descriptor status flags at any time.
However, an active interrupt flag gets cleared rather late. This
allows a race condition that could theoretically lose an interrupt.
Fix this by clearing asserted interrupt flags immediately.

Fixes: efcce839

 ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netif_stop_queue() call in sonic_send_packet() races with the
netif_wake_queue() call in sonic_interrupt(). This causes issues
like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out".
Fix this by disabling interrupts when accessing tx_skb[] and next_tx.
Update a comment to clarify the synchronization properties.

Fixes: efcce839

 ("[PATCH] macsonic/jazzsonic network drivers update")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the only 10G PHY interface type defined at the moment the code
was developed was XGMII, although the PHY interface mode used was
not XGMII, XGMII was used in the code to denote 10G. This patch
renames the 10G interface mode to remove the ambiguity.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Madalin Bucur says:

====================
net: fsl/fman: address erratum A011043

This addresses a HW erratum on some QorIQ DPAA devices.

MDIO reads to internal PCS registers may result in having
the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
error and read data (MDIO_DATA[MDIO_DATA]) is correct.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
When the issue was present, one could see such errors
during boot:

  mdio_bus ffe4e5000: Error while reading PHY0 reg at 3.3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

When fsl,erratum-a011043 is set, adjust for erratum A011043:
MDIO reads to internal PCS registers may result in having
the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
error and read data (MDIO_DATA[MDIO_DATA]) is correct.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add fsl,erratum-a011043 to internal MDIO buses.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an entry for erratum A011043: the MDIO_CFG[MDIO_RD_ER]
bit may be falsely set when reading internal PCS registers.
MDIO reads to internal PCS registers may result in having
the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
error and read data (MDIO_DATA[MDIO_DATA]) is correct.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver while collecting firmware dump takes longer time to
collect/process some of the firmware dump entries/memories.
Bigger capture masks makes it worse as it results in larger
amount of data being collected and results in CPU soft lockup.
Place cond_resched() in some of the driver flows that are
expectedly time consuming to relinquish the CPU to avoid CPU
soft lockup panic.

Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Yonggen Xu <Yonggen.Xu@dell.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When submitting v2 of "fou: Support binding FoU socket" (1713cb37

),
I accidentally sent the wrong version of the patch and one fix was
missing. In the initial version of the patch, as well as the version 2
that I submitted, I incorrectly used ".type" for the two V6-attributes.
The correct is to use ".len".

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 1713cb37

 ("fou: Support binding FoU socket")
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-2020-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers



Kalle Valo says:

====================
wireless-drivers fixes for v5.5

Second set of fixes for v5.5. There are quite a few patches,
especially on iwlwifi, due to me being on a long break. Libertas also
has a security fix and mt76 a build fix.

iwlwifi

* don't send the PPAG command when PPAG is disabled, since it can cause problems

* a few fixes for a HW bug

* a fix for RS offload;

* a fix for 3168 devices where the NVM tables where the wrong tables were being read

* fix a couple of potential memory leaks in TXQ code

* disable L0S states in all hardware since our hardware doesn't
 officially support them anymore (and older versions of the hardware
 had instability in these states)

* remove lar_disable parameter since it has been causing issues for
  some people who erroneously disable it

* force the debug monitor HW to stop also when debug is disabled,
  since it sometimes stays on and prevents low system power states

* don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems

libertas

* fix two buffer overflows

mt76

* build fix related to CONFIG_MT76_LEDS

* fix off by one in bitrates handling
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

If both IFF_NAPI_FRAGS mode and XDP are enabled, and the XDP program
consumes the skb, we need to clear the napi.skb (or risk
a use-after-free) and release the mutex (or risk a deadlock)

WARNING: lock held when returning to user space!
5.5.0-rc6-syzkaller #0 Not tainted
------------------------------------------------
syz-executor.0/455 is leaving the kernel with locks still held!
1 lock held by syz-executor.0/455:
 #0: ffff888098f6e748 (&tfile->napi_mutex){+.+.}, at: tun_get_user+0x1604/0x3fc0 drivers/net/tun.c:1835

Fixes: 90e33d45

 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Petar Penkov <ppenkov@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During reload (or module unload), the router block is de-initialized.
Among other things, this results in the removal of a default multicast
route from each active virtual router (VRF). These default routes are
configured during initialization to trap packets to the CPU. In
Spectrum-2, unlike Spectrum-1, multicast routes are implemented using
ACL rules.

Since the router block is de-initialized before the ACL block, it is
possible that the ACL rules corresponding to the default routes are
deleted while being accessed by the ACL delayed work that queries rules'
activity from the device. This can result in a rare use-after-free [1].

Fix this by protecting the rules list accessed by the delayed work with
a lock. We cannot use a spinlock as the activity read operation is
blocking.

[1]
[  123.331662] ==================================================================
[  123.339920] BUG: KASAN: use-after-free in mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0
[  123.349381] Read of size 8 at addr ffff8881f3bb4520 by task kworker/0:2/78
[  123.357080]
[  123.358773] CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 5.5.0-rc5-custom-33108-gf5df95d3ef41 #2209
[  123.368898] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
[  123.378456] Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work
[  123.385970] Call Trace:
[  123.388734]  dump_stack+0xc6/0x11e
[  123.392568]  print_address_description.constprop.4+0x21/0x340
[  123.403236]  __kasan_report.cold.8+0x76/0xb1
[  123.414884]  kasan_report+0xe/0x20
[  123.418716]  mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0
[  123.444034]  process_one_work+0xb06/0x19a0
[  123.453731]  worker_thread+0x91/0xe90
[  123.467348]  kthread+0x348/0x410
[  123.476847]  ret_from_fork+0x24/0x30
[  123.480863]
[  123.482545] Allocated by task 73:
[  123.486273]  save_stack+0x19/0x80
[  123.490000]  __kasan_kmalloc.constprop.6+0xc1/0xd0
[  123.495379]  mlxsw_sp_acl_rule_create+0xa7/0x230
[  123.500566]  mlxsw_sp2_mr_tcam_route_create+0xf6/0x3e0
[  123.506334]  mlxsw_sp_mr_tcam_route_create+0x5b4/0x820
[  123.512102]  mlxsw_sp_mr_table_create+0x3b5/0x690
[  123.517389]  mlxsw_sp_vr_get+0x289/0x4d0
[  123.521797]  mlxsw_sp_fib_node_get+0xa2/0x990
[  123.526692]  mlxsw_sp_router_fib4_event_work+0x54c/0x2d60
[  123.532752]  process_one_work+0xb06/0x19a0
[  123.537352]  worker_thread+0x91/0xe90
[  123.541471]  kthread+0x348/0x410
[  123.545103]  ret_from_fork+0x24/0x30
[  123.549113]
[  123.550795] Freed by task 518:
[  123.554231]  save_stack+0x19/0x80
[  123.557958]  __kasan_slab_free+0x125/0x170
[  123.562556]  kfree+0xd7/0x3a0
[  123.565895]  mlxsw_sp_acl_rule_destroy+0x63/0xd0
[  123.571081]  mlxsw_sp2_mr_tcam_route_destroy+0xd5/0x130
[  123.576946]  mlxsw_sp_mr_tcam_route_destroy+0xba/0x260
[  123.582714]  mlxsw_sp_mr_table_destroy+0x1ab/0x290
[  123.588091]  mlxsw_sp_vr_put+0x1db/0x350
[  123.592496]  mlxsw_sp_fib_node_put+0x298/0x4c0
[  123.597486]  mlxsw_sp_vr_fib_flush+0x15b/0x360
[  123.602476]  mlxsw_sp_router_fib_flush+0xba/0x470
[  123.607756]  mlxsw_sp_vrs_fini+0xaa/0x120
[  123.612260]  mlxsw_sp_router_fini+0x137/0x384
[  123.617152]  mlxsw_sp_fini+0x30a/0x4a0
[  123.621374]  mlxsw_core_bus_device_unregister+0x159/0x600
[  123.627435]  mlxsw_devlink_core_bus_device_reload_down+0x7e/0xb0
[  123.634176]  devlink_reload+0xb4/0x380
[  123.638391]  devlink_nl_cmd_reload+0x610/0x700
[  123.643382]  genl_rcv_msg+0x6a8/0xdc0
[  123.647497]  netlink_rcv_skb+0x134/0x3a0
[  123.651904]  genl_rcv+0x29/0x40
[  123.655436]  netlink_unicast+0x4d4/0x700
[  123.659843]  netlink_sendmsg+0x7c0/0xc70
[  123.664251]  __sys_sendto+0x265/0x3c0
[  123.668367]  __x64_sys_sendto+0xe2/0x1b0
[  123.672773]  do_syscall_64+0xa0/0x530
[  123.676892]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  123.682552]
[  123.684238] The buggy address belongs to the object at ffff8881f3bb4500
[  123.684238]  which belongs to the cache kmalloc-128 of size 128
[  123.698261] The buggy address is located 32 bytes inside of
[  123.698261]  128-byte region [ffff8881f3bb4500, ffff8881f3bb4580)
[  123.711303] The buggy address belongs to the page:
[  123.716682] page:ffffea0007ceed00 refcount:1 mapcount:0 mapping:ffff888236403500 index:0x0
[  123.725958] raw: 0200000000000200 dead000000000100 dead000000000122 ffff888236403500
[  123.734646] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
[  123.743315] page dumped because: kasan: bad access detected
[  123.749562]
[  123.751241] Memory state around the buggy address:
[  123.756620]  ffff8881f3bb4400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  123.764716]  ffff8881f3bb4480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  123.772812] >ffff8881f3bb4500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  123.780904]                                ^
[  123.785697]  ffff8881f3bb4580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  123.793793]  ffff8881f3bb4600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  123.801883] ==================================================================

Fixes: cf7221a4

 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hayes Wang says:

====================
r8152: serial fixes

v3:
1. Fix the typos for patch #5 and #6.
2. Modify the commit message of patch #9.

v2:
For patch #2, move declaring the variable "ocp_data".

v1:
These patches are used to fix some issues for RTL8153.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

When enabling this, the device would wait an internal signal which
wouldn't be triggered. Then, the device couldn't enter P3 mode, so
the power consumption is increased.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid the MCU to clear the lanwake after suspending. It may cause the
WOL fail. Disable LANWAKE_CLR_EN before suspending. Besides,enable it
and reset the lanwake status when resuming or initializing.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For certain platforms, it causes USB reset periodically.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For RTL8153B with QFN32, disable test IO. Otherwise, it may cause
abnormal behavior for the device randomly.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PLA MCU clock speed down could only be enabled when tx/rx are disabled.
Otherwise, the packet loss may occur.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable U2P3 may miss zero packet for bulk-in.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initailization would reset runtime suspend by tp->saved_wolopts, so
the tp->saved_wolopts should be set before initializing.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When linking ON, the patch of flow control has to be reset. This
makes sure the patch works normally.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the runtime resume doesn't work normally for linking change.

1. Reset the settings and status of runtime suspend.
2. Sync the linking status.
3. Poll the linking change.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A malicious user could use RAW sockets and fool
GTP using them as standard SOCK_DGRAM UDP sockets.

BUG: KMSAN: uninit-value in udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline]
BUG: KMSAN: uninit-value in setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85
CPU: 0 PID: 11262 Comm: syz-executor613 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline]
 setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85
 gtp_encap_enable_socket+0x37f/0x5a0 drivers/net/gtp.c:827
 gtp_encap_enable drivers/net/gtp.c:844 [inline]
 gtp_newlink+0xfb/0x1e50 drivers/net/gtp.c:666
 __rtnl_newlink net/core/rtnetlink.c:3305 [inline]
 rtnl_newlink+0x2973/0x3920 net/core/rtnetlink.c:3363
 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424
 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg net/socket.c:659 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
 ___sys_sendmsg net/socket.c:2384 [inline]
 __sys_sendmsg+0x451/0x5f0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x441359
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff1cd0ac28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441359
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000246 R12: 00000000004020d0
R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags+0x3c/0x90 mm/kmsan/kmsan.c:144
 kmsan_internal_alloc_meta_for_pages mm/kmsan/kmsan_shadow.c:307 [inline]
 kmsan_alloc_page+0x12a/0x310 mm/kmsan/kmsan_shadow.c:336
 __alloc_pages_nodemask+0x57f2/0x5f60 mm/page_alloc.c:4800
 alloc_pages_current+0x67d/0x990 mm/mempolicy.c:2207
 alloc_pages include/linux/gfp.h:534 [inline]
 alloc_slab_page+0x111/0x12f0 mm/slub.c:1511
 allocate_slab mm/slub.c:1656 [inline]
 new_slab+0x2bc/0x1130 mm/slub.c:1722
 new_slab_objects mm/slub.c:2473 [inline]
 ___slab_alloc+0x1533/0x1f30 mm/slub.c:2624
 __slab_alloc mm/slub.c:2664 [inline]
 slab_alloc_node mm/slub.c:2738 [inline]
 slab_alloc mm/slub.c:2783 [inline]
 kmem_cache_alloc+0xb23/0xd70 mm/slub.c:2788
 sk_prot_alloc+0xf2/0x620 net/core/sock.c:1597
 sk_alloc+0xf0/0xbe0 net/core/sock.c:1657
 inet_create+0x7c7/0x1370 net/ipv4/af_inet.c:321
 __sock_create+0x8eb/0xf00 net/socket.c:1420
 sock_create net/socket.c:1471 [inline]
 __sys_socket+0x1a1/0x600 net/socket.c:1513
 __do_sys_socket net/socket.c:1522 [inline]
 __se_sys_socket+0x8d/0xb0 net/socket.c:1520
 __x64_sys_socket+0x4a/0x70 net/socket.c:1520
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 459aa660

 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira <pablo@netfilter.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl_create_link() needs to apply dev->min_mtu and dev->max_mtu
checks that we apply in do_setlink()

Otherwise malicious users can crash the kernel, for example after
an integer overflow :

BUG: KASAN: use-after-free in memset include/linux/string.h:365 [inline]
BUG: KASAN: use-after-free in __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238
Write of size 32 at addr ffff88819f20b9c0 by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:639
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x134/0x1a0 mm/kasan/generic.c:192
 memset+0x24/0x40 mm/kasan/common.c:108
 memset include/linux/string.h:365 [inline]
 __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238
 alloc_skb include/linux/skbuff.h:1049 [inline]
 alloc_skb_with_frags+0x93/0x590 net/core/skbuff.c:5664
 sock_alloc_send_pskb+0x7ad/0x920 net/core/sock.c:2242
 sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2259
 mld_newpack+0x1d7/0x7f0 net/ipv6/mcast.c:1609
 add_grhead.isra.0+0x299/0x370 net/ipv6/mcast.c:1713
 add_grec+0x7db/0x10b0 net/ipv6/mcast.c:1844
 mld_send_cr net/ipv6/mcast.c:1970 [inline]
 mld_ifc_timer_expire+0x3d3/0x950 net/ipv6/mcast.c:2477
 call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers kernel/time/timer.c:1773 [inline]
 __run_timers kernel/time/timer.c:1740 [inline]
 run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786
 __do_softirq+0x262/0x98c kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0x19b/0x1e0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
 </IRQ>
RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61
Code: 98 6b ea f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 44 1c 60 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 34 1c 60 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 4e 5d 9a f9 e8 79
RSP: 0018:ffffffff89807ce8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff13266ae RBX: ffffffff8987a1c0 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffffffff8987aa54
RBP: ffffffff89807d18 R08: ffffffff8987a1c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000
R13: ffffffff8a799980 R14: 0000000000000000 R15: 0000000000000000
 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:690
 default_idle_call+0x84/0xb0 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361
 rest_init+0x23b/0x371 init/main.c:451
 arch_call_rest_init+0xe/0x1b
 start_kernel+0x904/0x943 init/main.c:784
 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490
 x86_64_start_kernel+0x77/0x7b arch/x86/kernel/head64.c:471
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242

The buggy address belongs to the page:
page:ffffea00067c82c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
raw: 057ffe0000000000 ffffea00067c82c8 ffffea00067c82c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88819f20b880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff88819f20b900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88819f20b980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                           ^
 ffff88819f20ba00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff88819f20ba80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 61e84623

 ("net: centralize net_device min/max MTU checking")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>