At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.

Cc: <stable@vger.kernel.org>
Fixes: f1f0f330

 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp


Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA dice driver detects jumbo payload at high sampling transfer frequency
for below models:

 * Avid M-Box 3 Pro
 * M-Audio Profire 610
 * M-Audio Profire 2626

Although many DICE-based devices have a quirk at high sampling transfer
frequency to multiplex double number of PCM frames into data block than
the number in IEC 61883-1/6, the above devices are just compliant to
IEC 61883-1/6.

This commit disables the mode of double_pcm_frames for the models.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012510.37126-1-o-takashi@sakamocchi.jp


Signed-off-by: Takashi Iwai <tiwai@suse.de>

The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream.  This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.

For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.

Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix "use as headset mic, without its own jack detect" problen.

Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/d0746eaf29f248a5acc30313e3ba4f99@realtek.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

The snd_firewire_lib:amdtp_packet tracepoints event includes index of
packet processed in a context handling. However in IR context, it is not
calculated as expected.

Cc: <stable@vger.kernel.org>
Fixes: 753e7179

 ("ALSA: firewire-lib: use packet descriptor for IR context")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-6-o-takashi@sakamocchi.jp


Signed-off-by: Takashi Iwai <tiwai@suse.de>

The quadlets for CIP header is handled as a part of IR context header,
thus it doesn't join in IR context payload. However current calculation
includes the quadlets in IR context payload.

Cc: <stable@vger.kernel.org>
Fixes: f11453c7

 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-5-o-takashi@sakamocchi.jp


Signed-off-by: Takashi Iwai <tiwai@suse.de>

The check for size of isochronous packet payload just cares of the size of
IR context payload without the size of CIP header.

Cc: <stable@vger.kernel.org>
Fixes: f11453c7

 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-4-o-takashi@sakamocchi.jp


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.

This commit fixes entries in Kconfig and comment in ALSA OXFW driver.

Cc: <stable@vger.kernel.org>
Fixes: fd6f4b0d ("ALSA: bebob: Add skelton for BeBoB based devices")
Fixes: ec4dba50

 ("ALSA: oxfw: Add support for Behringer/Mackie devices")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.

This commit fixes hardcoded stream formats.

Cc: <stable@vger.kernel.org>
Fixes: 28b208f6

 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fixup to enable all 4 speaker on HP Spectre x360 15-df0xxx and probably
on similar models.

0x14 pin config override is required to enable all speakers and
alc285-speaker2-to-dac1 fixup to enable volume adjustment.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=189331


Signed-off-by: Elia Devito <eliadevito@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210511124651.4802-1-eliadevito@gmail.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recently introduced MIDI endpoint parser code has an access to the
field without the size validation, hence it might lead to
out-of-bounce access.  Add the sanity checks for the descriptor
sizes.

Fixes: eb596e0f ("ALSA: usb-audio: generate midi streaming substream names from jack names")
Link: https://lore.kernel.org/r/20210511090500.2637-1-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd_usbmidi_get_ms_info() may access beyond the border when a
malformed descriptor is passed.  This patch adds the sanity checks of
the given MS endpoint descriptors, and skips invalid ones.

Reported-by:  <syzbot+6bb23a5d5548b93c94aa@syzkaller.appspotmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210510150659.17710-1-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

The GU502 requires a few steps to make headset i/o works properly:
pincfg, verbs to unmute headphone out and callback to toggle output
between speakers and headphone using jack.

Signed-off-by: Daniel Cordova A <danesc87@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210507173116.12043-1-danesc87@gmail.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Ubuntu users reported an audio bug on the Lenovo Yoga Slim 7 14IIL05,
he installed dual OS (Windows + Linux), if he booted to the Linux
from Windows, the Speaker can't work well, it has crackling noise,
if he poweroff the machine first after Windows, the Speaker worked
well.

Before rebooting or shutdown from Windows, the Windows changes the
codec eapd coeff value, but the BIOS doesn't re-initialize its value,
when booting into the Linux from Windows, the eapd coeff value is not
correct. To fix it, set the codec default value to that coeff register
in the alsa driver.

BugLink: http://bugs.launchpad.net/bugs/1925057


Suggested-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210507024452.8300-1-hui.wang@canonical.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Without this change, the DAC ctl's name could be changed only when
the machine has both Speaker and Headphone, but we met some machines
which only has Lineout and Headhpone, and the Lineout and Headphone
share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".

On most of machines, the "Front" is used for Speaker only or Lineout
only, but on this machine it is shared by Lineout and Headphone,
This introduces an issue in the pipewire and pulseaudio, suppose users
want the Headphone to be on and the Speaker/Lineout to be off, they
could turn off the "Front", this works on most of the machines, but on
this machine, the "Front" couldn't be turned off otherwise the
headphone will be off too. Here we do some change to let the ctl's
name change to "Headphone+LO" on this machine, and pipewire and
pulseaudio already could handle "Headphone+LO" and "Speaker+LO".
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)

BugLink: http://bugs.launchpad.net/bugs/804178


Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210504073917.22406-1-hui.wang@canonical.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config
overrides and the existing mic/mute LED setup.  This patch implements
those in the fixup table.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212733
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504121832.4558-1-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

HP Envy AiO 32-a12xxx has an external amp that is controlled via GPIO
bit 0x04.  However, unlike other devices, this amp seems to shut down
itself after the certain period, hence the OS needs to up/down the bit
dynamically only during the actual playback.

This patch adds the control of the GPIO bit via the existing pcm_hook
mechanism.  Ideally it should be triggered at the actual stream start,
but we have only the state change at prepare/cleanup, so use those for
switching the GPIO bit on/off.  This should be good enough for the
purpose, and was actually confirmed to work fine.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504091802.13200-1-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

It was reported that the headphone output on ASUS UX430UA (SSID
1043:1740) with ALC295 codec is silent while the speaker works.
After the investigation, it turned out that the DAC assignment has to
be fixed on this machine; unlike others, it expects DAC 0x02 to be
assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin
0x21.

This patch provides a fixup for the fixed DAC/pin mapping for this
device.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504082057.6913-1-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

The decibel volume range contains a negative maximum value resulting in
pipewire complaining about the device and effectivly having no sound
output. The wrong values also resulted in the headset sounding muted
already at a mixer level of about ~25%.

PipeWire BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1049

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212897


Signed-off-by: Timo Gurr <timo.gurr@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503110822.10222-1-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

In 9bbb94e5 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo
laptops") an existing Lenovo quirk was made more generic by removing a
0x12 pin requirement from the entry. This made the second chance table
Thinkpad jack entry unreachable as the pin configurations became
identical.

Revert the 0x12 pin requirement removal and move Thinkpad jack pin quirk
back to the primary pin table as they can co-exist when more specific
configurations come first.

Add a more targeted pin quirk for Lenovo devices that have 0x12 as
0x40000000.

Tested on Yoga 6 (AMD) laptop.

[ Corrected the commit ID -- tiwai ]

Fixes: 9bbb94e5

 ("ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops")
Signed-off-by: Sami Loone <sami@loone.fi>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YI0oefvTYn8URYDb@yoga


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the cx5066_fixups[] entries for HP devices for avoiding
the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-14-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

The quirk entry for Uniwill ECS M31EI is with the PCI SSID device 0,
which means matching with all.  That is, it's essentially equivalent
with SND_PCI_QUIRK_VENDOR(0x1584), which also matches with the
previous entry for Haier W18 applying the very same quirk.

Let's unify them with the single vendor-quirk entry.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-13-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc662_fixup_tbl[] entries for Acer and ASUS devices
for avoiding the oversight of the duplicated or unapplied item in
future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-12-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for FSC, Medion, Samsung
and Lemote devices for avoiding the oversight of the duplicated or
unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-11-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for Lenovo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-10-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-9-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for ASUS devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-8-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for Dell devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-7-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-6-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc269_fixup_tbl[] entries for HP devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Formerly, some entries were grouped for the actual codec, but this
doesn't seem reasonable to keep in that way.  So now we simply keep
the PCI SSID order for the whole.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-5-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc882_fixup_tbl[] entries for Clevo devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also, user lower hex letters in the entry.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-4-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc882_fixup_tbl[] entries for Sony devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-3-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Just re-order the alc882_fixup_tbl[] entries for Acer devices for
avoiding the oversight of the duplicated or unapplied item in future.
No functional changes.

Also Cc-to-stable for the further patch applications.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428112704.23967-2-tiwai@suse.de


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Variable len is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.

Cleans up the following clang-analyzer warning:

sound/usb/mixer.c:2713:3: warning: Value stored to 'len' is never read
[clang-analyzer-deadcode.DeadStores].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619519194-57806-1-git-send-email-jiapeng.chong@linux.alibaba.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

This applies a SND_PCI_QUIRK(...) to the Clevo PCx0Dx barebones. This
fix enables audio output over the headset jack and ensures that a
microphone connected via the headset combo jack is correctly recognized
when pluged in.

[ Rearranged the list entries in a sorted order -- tiwai ]

Signed-off-by: Eckhart Mohr <e.mohr@tuxedocomputers.com>
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210427153025.451118-1-wse@tuxedocomputers.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

make W=1 warning:

sound/virtio/virtio_ctl_msg.c:70: warning: expecting prototype for
virtsnd_ctl_msg_request(). Prototype was for
virtsnd_ctl_msg_response() instead

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210426213902.234711-1-pierre-louis.bossart@linux.intel.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Cracking noises have been reported on the built-in speaker for certain
Bullseye platforms, when volume is > 80%.

This issue is caused by the specific combination of Codec and AMP in
this platform, and cannot be fixed by the AMP, so indead must be fixed
at codec level, by adding attenuation to the volume.

Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1924997


Reported-and-tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426163749.196153-3-vitalyr@opensource.cirrus.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

After booting for first time on Bullseye, the DMIC is currently muted.
Instead, the DMIC volume should be set to a valid initial value.

Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1923557


Reported-and-tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426163749.196153-2-vitalyr@opensource.cirrus.com


Signed-off-by: Takashi Iwai <tiwai@suse.de>

In snd_sb_qsound_build, snd_ctl_add(..,p->qsound_switch...) and
snd_ctl_add(..,p->qsound_space..) are called. But the second
arguments of snd_ctl_add() could be freed via snd_ctl_add_replace()
->snd_ctl_free_one(). After the error code is returned,
snd_sb_qsound_destroy(p) is called in __error branch.

But in snd_sb_qsound_destroy(), the freed p->qsound_switch and
p->qsound_space are still used by snd_ctl_remove().

My patch set p->qsound_switch and p->qsound_space to NULL if
snd_ctl_add() failed to avoid the uaf bugs. But these codes need
to further be improved with the code style.

Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210426145541.8070-1-lyl2019@mail.ustc.edu.cn


Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.13

A lot of changes here for quite a quiet release in subsystem terms -
there's been a lot of fixes and cleanups all over the subsystem both
from generic work and from people working on specific drivers.

 - More cleanup and consolidation work in the core and the generic card
   drivers from Morimoto-san.
 - Lots of cppcheck fixes for Pierre-Louis Brossart.
 - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
   accessory detection, and Realtek RT1019, RT1316, RT711 and RT715.