Pull staging and IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 5.7-rc1.

  We again end up deleting more code than we added here, thanks to
  finally getting rid of the old and obsolete wireless USB stuff, and
  the exfat code (which is coming in again through the vfs tree in a
  much cleaner version).

  But some code does come back, with the octeon drivers being found to
  actually be used in the wild, so those deletions are now reverted.

  Other than those major things, just loads and loads of tiny checkpatch
  cleanups all over the place, along with new IIO drivers and fixes.

  All have been in linux-next with no reported issues"

[ Stephen Rothwell points out some reported issues due to merge conflicts ]

* tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (415 commits)
  staging: vt6656: Use DIV_ROUND_UP macro instead of specific code
  staging: remove hp100 driver
  staging: wilc1000: Use crc7 in lib/ rather than a private copy
  Staging: rtl8192u: ieee80211: Use netdev_alert().
  Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.
  Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.
  Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.
  staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
  staging: rtl8723bs: hal: Remove NULL check before kfree
  staging: rtl8723bs: hal: Correct typos in comments
  staging: rtl8723bs: os_dep: Correct typos in comments
  staging: rtl8723bs: core: Correct typos in comments
  staging: rtl8723bs: hal: Remove unnecessary cast on void pointer
  staging: rtl8188eu: cleanup long line in odm.c
  staging: rtl8723bs: hal: Compress return logic
  staging: rtl8723bs: rtw_cmd: Compress lines for immediate return
  staging: rtl8723bs: rtw_efuse: Compress lines for immediate return
  staging: wilc1000: remove label from examples in DT binding documentation
  staging: rtl8723bs: Remove blank line before '}' brace
  Staging: rtl8188eu: hal: Add space around operators
  ...

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core changes for 5.7-rc1.

  Nothing huge in here, just lots of little firmware core changes and
  use of new apis, a libfs fix, a debugfs api change, and some driver
  core deferred probe rework.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
  Revert "driver core: Set fw_devlink to "permissive" behavior by default"
  driver core: Set fw_devlink to "permissive" behavior by default
  driver core: Replace open-coded list_last_entry()
  driver core: Read atomic counter once in driver_probe_done()
  libfs: fix infoleak in simple_attr_read()
  driver core: Add device links from fwnode only for the primary device
  platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
  platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
  Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
  Input: silead - Switch to firmware_request_platform for retreiving the fw
  selftests: firmware: Add firmware_request_platform tests
  test_firmware: add support for firmware_request_platform
  firmware: Add new platform fallback mechanism and firmware_request_platform()
  Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
  drivers: base: power: wakeup.c: Use built-in RCU list checking
  component: allow missing unbind callback
  debugfs: remove return value of debugfs_create_file_size()
  debugfs: Check module state before warning in {full/open}_proxy_open()
  firmware: fix a double abort case with fw_load_sysfs_fallback
  arch_topology: Fix putting invalid cpu clk
  ...

Pull USB / PHY updates from Greg KH:
 "Here are the big set of USB and PHY driver patches for 5.7-rc1.

  Nothing huge here, some new PHY drivers, loads of USB gadget fixes and
  updates, xhci updates, usb-serial driver updates and new device ids,
  and other minor things. Full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits)
  USB: cdc-acm: restore capability check order
  usb: cdns3: make signed 1 bit bitfields unsigned
  usb: gadget: fsl: remove unused variable 'driver_desc'
  usb: gadget: f_fs: Fix use after free issue as part of queue failure
  usb: typec: Correct the documentation for typec_cable_put()
  USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
  USB: serial: option: add Wistron Neweb D19Q1
  USB: serial: option: add BroadMobi BM806U
  USB: serial: option: add support for ASKEY WWHC050
  usb: core: Add ACPI support for USB interface devices
  driver core: platform: Reimplement devm_platform_ioremap_resource
  usb: dwc2: convert to devm_platform_get_and_ioremap_resource
  usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource
  usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource
  drivers: provide devm_platform_get_and_ioremap_resource()
  phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
  phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY
  dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters
  phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
  dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180
  ...

Pull media updates from Mauro Carvalho Chehab:

 - New sensor driver: imx219

 - Support for some new pixelformats

 - Support for Sun8i SoC

 - Added more codecs to meson vdec driver

 - Prepare for removing the legacy usbvision driver by moving it to
   staging. This driver has issues and use legacy core APIs. If nobody
   steps up to address those, it is time for its retirement.

 - Several cleanups and improvements on drivers, with the addition of
   new supported boards

* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
  media: venus: firmware: Ignore secure call error on first resume
  media: mtk-vpu: load vpu firmware from the new location
  media: i2c: video-i2c: fix build errors due to 'imply hwmon'
  media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
  media: hantro: add initial i.MX8MQ support
  media: dt-bindings: Document i.MX8MQ VPU bindings
  media: vivid: fix incorrect PA assignment to HDMI outputs
  media: hantro: Add linux-rockchip mailing list to MAINTAINERS
  media: cedrus: h264: Fix 4K decoding on H6
  media: siano: Use scnprintf() for avoiding potential buffer overflow
  media: rc: Use scnprintf() for avoiding potential buffer overflow
  media: allegro: create new struct for channel parameters
  media: allegro: move mail definitions to separate file
  media: allegro: pass buffers through firmware
  media: allegro: verify source and destination buffer in VCU response
  media: allegro: handle dependency of bitrate and bitrate_peak
  media: allegro: read bitrate mode directly from control
  media: allegro: make QP configurable
  media: allegro: make frame rate configurable
  media: allegro: skip filler data if possible
  ...

Pull hwmon updates from Guenter Roeck:

 - New driver for AXI fan control

 - Attenuator bypass support and support for inverting pwm output in
   adt7475 driver

 - Support for new power supply version in ibm-cffps driver

 - PMBus drivers:

     * support for multi-phase chips

     * ltc2978 driver: add support for LTC2972, LTC2979, LTC3884,
       LTC3889, LTC7880, LTM4664, LTM4677, LTM4678, LTM4680, and
       LTM4700/

     * tps53679 driver: add support for TPS53681, TPS53647, and TPS53667

     * isl68137 driver: support for various 2nd Gen Renesas digital
       multiphase chips added to isl68137 driver

 - Minor improvements and fixes in nct7904, ibmpowernv, lm73, ibmaem,
   and k10temp drivers

* tag 'hwmon-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (29 commits)
  docs: hwmon: Update documentation for isl68137 pmbus driver
  hwmon: (pmbus) add support for 2nd Gen Renesas digital multiphase
  hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection
  hwmon: (nct7904) Fix the incorrect quantity for fan & temp attributes
  hwmon: (ibmpowernv) Use scnprintf() for avoiding potential buffer overflow
  hwmon: (adt7475) Add support for inverting pwm output
  hwmon: (adt7475) Add attenuator bypass support
  dt-bindings: hwmon: Document adt7475 pwm-active-state property
  dt-bindings: hwmon: Document adt7475 bypass-attenuator property
  dt-bindings: hwmon: Document adt7475 binding
  hwmon: (lm73) Add support for of_match_table
  dt-bindings: Add TI LM73 as a trivial device
  hwmon: (pmbus/tps53679) Add documentation
  hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667
  hwmon: (pmbus/tps53679) Add support for TPS53681
  hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688
  hwmon: (pmbus/tps53679) Add support for multiple chips IDs
  hwmon: (pmbus) Implement multi-phase support
  hwmon: (pmbus) Add 'phase' parameter where needed for multi-phase support
  hwmon: (pmbus) Add IC_DEVICE_ID and IC_DEVICE_REV command definitions
  ...

Pull RAS updates from Borislav Petkov:

 - Do not report spurious MCEs on some Intel platforms caused by errata;
   by Prarit Bhargava.

 - Change dev-mcelog's hardcoded limit of 32 error records to a dynamic
   one, controlled by the number of logical CPUs, by Tony Luck.

 - Add support for the processor identification number (PPIN) on AMD, by
   Wei Huang.

* tag 'ras_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/amd: Add PPIN support for AMD MCE
  x86/mce/dev-mcelog: Dynamically allocate space for machine check records
  x86/mce: Do not log spurious corrected mce errors

Pull EDAC updates from Borislav Petkov:

 - A substantial edac_mc cleanup, sanitizing object freeing,
   streamlining and simplifying code flow, and getting rid of a lot of
   needless complexity in memory controller representation code, by
   Robert Richter.

 - A new EDAC driver for the ARM DMC-520 memory controller, by Lei Wang,
   Shiping Ji and others.

 - The usual sprinkling of misc cleanups and fixes all over the
   subsystem.

* tag 'edac_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/armada_xp: Use scnprintf() for avoiding potential buffer overflow
  EDAC/synopsys: Do not dump uninitialized pinf->col
  EDAC: Add EDAC driver for DMC520
  dt-bindings: edac: Dmc-520.yaml
  EDAC/mce_amd: Print !SMCA processor warning only once
  EDAC/mc: Remove per layer counters
  EDAC/mc: Remove detail[] string and cleanup error string generation
  EDAC/mc: Pass the error descriptor to error reporting functions
  EDAC/mc: Remove enable_per_layer_report function argument
  EDAC/mc: Report "unknown memory" on too many DIMM labels found
  EDAC/mc: Carve out error increment into a separate function
  EDAC/mc: Determine mci pointer from the error descriptor
  EDAC: Store error type in struct edac_raw_error_desc
  EDAC/mc: Reorder functions edac_mc_alloc*()
  EDAC/mc: Split edac_mc_alloc() into smaller functions
  EDAC/mc: Change mci device removal to use put_device()

Pull pstore updates from Kees Cook:
 "These mostly some minor cleanups and a bug fix for an ftrace corner
  case:

   - Improve failure paths (chenqiwu)

   - Fix ftrace position index (Vasily Averin)

   - Use proper flexible-array member (Gustavo A. R. Silva)"

* tag 'pstore-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Replace zero-length array with flexible-array member
  pstore: pstore_ftrace_seq_next should increase position index
  pstore/ram: remove unnecessary ramoops_unregister_dummy()
  pstore/platform: fix potential mem leak if pstore_init_fs failed

Pull seccomp updates from Kees Cook:
 "A couple of seccomp updates. They're both mostly bug fixes that I
  wanted to have sit in linux-next for a while:

   - allow TSYNC and USER_NOTIF together (Tycho Andersen)

   - add missing compat_ioctl for notify (Sven Schnelle)"

* tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Add missing compat_ioctl for notify
  seccomp: allow TSYNC and USER_NOTIF together

Pull erofs updates from Gao Xiang:
 "Updates with a XArray adaptation, several fixes for shrinker and
  corrupted images are ready for this cycle.

  All commits have been stress tested with no noticeable smoke out and
  have been in linux-next as well.

  Summary:

   - Convert radix tree usage to XArray

   - Fix shrink scan count on multiple filesystem instances

   - Better handling for specific corrupted images

   - Update my email address in MAINTAINERS"

* tag 'erofs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  MAINTAINERS: erofs: update my email address
  erofs: handle corrupted images whose decompressed size less than it'd be
  erofs: use LZ4_decompress_safe() for full decoding
  erofs: correct the remaining shrink objects
  erofs: convert workstn to XArray

Pull documentation updates from Jonathan Corbet:
 "This has been a busy cycle for documentation work.

  Highlights include:

   - Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
     Maybe someday we'll get to the end of this stuff...maybe...

   - Some organizational work to bring some order to the core-api
     manual.

   - Various new docs and additions to the existing documentation.

   - Typo fixes, warning fixes, ..."

* tag 'docs-5.7' of git://git.lwn.net/linux: (123 commits)
  Documentation: x86: exception-tables: document CONFIG_BUILDTIME_TABLE_SORT
  MAINTAINERS: adjust to filesystem doc ReST conversion
  docs: deprecated.rst: Add BUG()-family
  doc: zh_CN: add translation for virtiofs
  doc: zh_CN: index files in filesystems subdirectory
  docs: locking: Drop :c:func: throughout
  docs: locking: Add 'need' to hardirq section
  docs: conf.py: avoid thousands of duplicate label warning on Sphinx
  docs: prevent warnings due to autosectionlabel
  docs: fix reference to core-api/namespaces.rst
  docs: fix pointers to io-mapping.rst and io_ordering.rst files
  Documentation: Better document the softlockup_panic sysctl
  docs: hw-vuln: tsx_async_abort.rst: get rid of an unused ref
  docs: perf: imx-ddr.rst: get rid of a warning
  docs: filesystems: fuse.rst: supress a Sphinx warning
  docs: translations: it: avoid duplicate refs at programming-language.rst
  docs: driver.rst: supress two ReSt warnings
  docs: trace: events.rst: convert some new stuff to ReST format
  Documentation: Add io_ordering.rst to driver-api manual
  Documentation: Add io-mapping.rst to driver-api manual
  ...

Pull io_uring updates from Jens Axboe:
 "Here are the io_uring changes for this merge window. Light on new
  features this time around (just splice + buffer selection), lots of
  cleanups, fixes, and improvements to existing support. In particular,
  this contains:

   - Cleanup fixed file update handling for stack fallback (Hillf)

   - Re-work of how pollable async IO is handled, we no longer require
     thread offload to handle that. Instead we rely using poll to drive
     this, with task_work execution.

   - In conjunction with the above, allow expendable buffer selection,
     so that poll+recv (for example) no longer has to be a split
     operation.

   - Make sure we honor RLIMIT_FSIZE for buffered writes

   - Add support for splice (Pavel)

   - Linked work inheritance fixes and optimizations (Pavel)

   - Async work fixes and cleanups (Pavel)

   - Improve io-wq locking (Pavel)

   - Hashed link write improvements (Pavel)

   - SETUP_IOPOLL|SETUP_SQPOLL improvements (Xiaoguang)"

* tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block: (54 commits)
  io_uring: cleanup io_alloc_async_ctx()
  io_uring: fix missing 'return' in comment
  io-wq: handle hashed writes in chains
  io-uring: drop 'free_pfile' in struct io_file_put
  io-uring: drop completion when removing file
  io_uring: Fix ->data corruption on re-enqueue
  io-wq: close cancel gap for hashed linked work
  io_uring: make spdxcheck.py happy
  io_uring: honor original task RLIMIT_FSIZE
  io-wq: hash dependent work
  io-wq: split hashing and enqueueing
  io-wq: don't resched if there is no work
  io-wq: remove duplicated cancel code
  io_uring: fix truncated async read/readv and write/writev retry
  io_uring: dual license io_uring.h uapi header
  io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled
  io_uring: Fix unused function warnings
  io_uring: add end-of-bits marker and build time verify it
  io_uring: provide means of removing buffers
  io_uring: add IOSQE_BUFFER_SELECT support for IORING_OP_RECVMSG
  ...

Pull block driver updates from Jens Axboe:

 - floppy driver cleanup series from Willy

 - NVMe updates and fixes (Various)

 - null_blk trace improvements (Chaitanya)

 - bcache fixes (Coly)

 - md fixes (via Song)

 - loop block size change optimizations (Martijn)

 - scnprintf() use (Takashi)

* tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits)
  null_blk: add trace in null_blk_zoned.c
  null_blk: add tracepoint helpers for zoned mode
  block: add a zone condition debug helper
  nvme: cleanup namespace identifier reporting in nvme_init_ns_head
  nvme: rename __nvme_find_ns_head to nvme_find_ns_head
  nvme: refactor nvme_identify_ns_descs error handling
  nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl
  nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl
  nvme: Fix controller creation races with teardown flow
  nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl
  nvme: Fix ctrl use-after-free during sysfs deletion
  nvme-pci: Re-order nvme_pci_free_ctrl
  nvme: Remove unused return code from nvme_delete_ctrl_sync
  nvme: Use nvme_state_terminal helper
  nvme: release ida resources
  nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO
  nvmet-tcp: optimize tcp stack TX when data digest is used
  nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow
  nvme-multipath: do not reset on unknown status
  nvmet-rdma: allocate RW ctxs according to mdts
  ...

Pull block updates from Jens Axboe:

 - Online capacity resizing (Balbir)

 - Number of hardware queue change fixes (Bart)

 - null_blk fault injection addition (Bart)

 - Cleanup of queue allocation, unifying the node/no-node API
   (Christoph)

 - Cleanup of genhd, moving code to where it makes sense (Christoph)

 - Cleanup of the partition handling code (Christoph)

 - disk stat fixes/improvements (Konstantin)

 - BFQ improvements (Paolo)

 - Various fixes and improvements

* tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits)
  block: return NULL in blk_alloc_queue() on error
  block: move bio_map_* to blk-map.c
  Revert "blkdev: check for valid request queue before issuing flush"
  block: simplify queue allocation
  bcache: pass the make_request methods to blk_queue_make_request
  null_blk: use blk_mq_init_queue_data
  block: add a blk_mq_init_queue_data helper
  block: move the ->devnode callback to struct block_device_operations
  block: move the part_stat* helpers from genhd.h to a new header
  block: move block layer internals out of include/linux/genhd.h
  block: move guard_bio_eod to bio.c
  block: unexport get_gendisk
  block: unexport disk_map_sector_rcu
  block: unexport disk_get_part
  block: mark part_in_flight and part_in_flight_rw static
  block: mark block_depr static
  block: factor out requeue handling from dispatch code
  block/diskstats: replace time_in_queue with sum of request times
  block/diskstats: accumulate all per-cpu counters in one pass
  block/diskstats: more accurate approximation of io_ticks for slow disks
  ...

Pull libata updates from Jens Axboe:

 - Series from Bart, making the libata code smaller on PATA only setups.
   This is useful for smaller/embedded use cases, and will help us move
   some of those off drivers/ide.

 - Kill unused BPRINTK() (Hannes)

 - Add various Comet Lake ahci PCI ids (Kai-Heng, Mika)

 - Fix for a double scsi_host_put() in error handling (John)

 - Use scnprintf (Takashi)

 - Assign OF node to the SCSI device (Linus Walleij)

* tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-block: (36 commits)
  ata: make "libata.force" kernel parameter optional
  ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c
  ata: start separating SATA specific code from libata-eh.c
  ata: move ata_sas_*() to libata-sata.c
  ata: start separating SATA specific code from libata-scsi.c
  ata: move sata_deb_timing_*() to libata-sata.c
  ata: move ata_qc_complete_multiple() to libata-sata.c
  ata: move sata_link_hardreset() to libata-sata.c
  ata: move sata_link_{debounce,resume}() to libata-sata.c
  ata: move *sata_set_spd*() to libata-sata.c
  ata: move sata_scr_*() to libata-sata.c
  ata: start separating SATA specific code from libata-core.c
  ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts
  ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts
  ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()
  ata: separate PATA timings code from libata-core.c
  ata: fix CodingStyle issues in PATA timings code
  ata: remove EXPORT_SYMBOL_GPL()s not used by modules
  ata: move EXPORT_SYMBOL_GPL()s close to exported code
  ata: optimize ata_scsi_rbuf[] size
  ...

Pull i3c updates from Boris Brezillon:

 - Fix driver auto-probing related issues

 - Stop using the deprecated i2c_new_device() function

 - Replace zero-length array with flexible-array member

* tag 'i3c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: convert to use i2c_new_client_device()
  i3c: master: Replace zero-length array with flexible-array member
  i3c: Simplify i3c_device_match_id()
  i3c: Generate aliases for i3c modules
  i3c: Add a modalias sysfs attribute
  i3c: Fix MODALIAS uevents
  i3c: master: no need to iterate master device twice

Pull tpm updates from Jarkko Sakkinen:
 "tpmdd updates for Linux v5.7"

* tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmdd:
  KEYS: reaching the keys quotas correctly
  tpm: ibmvtpm: Add support for TPM2
  tpm: ibmvtpm: Wait for buffer to be set before proceeding
  tpm: of: Handle IBM,vtpm20 case when getting log parameters
  MAINTAINERS: adjust to trusted keys subsystem creation
  tpm: tpm_tis_spi_cr50: use new structure for SPI transfer delays
  tpm_tis_spi: use new 'delay' structure for SPI transfer delays
  tpm: tpm2_bios_measurements_next should increase position index
  tpm: tpm1_bios_measurements_next should increase position index
  tpm: Don't make log failures fatal

With the latest cleanup in qcom scm driver the secure monitor
call for setting the remote processor state returns EINVAL when
it is called for the first time and after another scm call
auth_and_reset. The error returned from scm call could be ignored
because the state transition is already done in auth_and_reset.

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Merge branches 'edac-mc-cleanup', 'edac-misc', 'edac-drivers' and 'edac-urgent' into edac-updates-for-5.7

Signed-off-by: Borislav Petkov <bp@suse.de>

Executing the seccomp_bpf testsuite under a 64-bit kernel with 32-bit
userland (both s390 and x86) doesn't work because there's no compat_ioctl
handler defined. Add the handler.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 6a21cc50 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200310123332.42255-1-svens@linux.ibm.com


Signed-off-by: Kees Cook <keescook@chromium.org>

Merge vm fixes from Andrew Morton:
 "5 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/sparse: fix kernel crash with pfn_section_valid check
  mm: fork: fix kernel_stack memcg stats for various stack implementations
  hugetlb_cgroup: fix illegal access to memory
  drivers/base/memory.c: indicate all memory blocks as removable
  mm/swapfile.c: move inode_lock out of claim_swapfile

Pull timer fix from Thomas Gleixner:
 "A single fix for the Hyper-V clocksource driver to make sched clock
  actually return nanoseconds and not the virtual clock value which
  increments at 10e7 HZ (100ns)"

* tag 'timers-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/hyper-v: Make sched clock return nanoseconds correctly

Pull irq fix from Thomas Gleixner:
 "A single bugfix to prevent reference leaks in irq affinity notifiers"

* tag 'irq-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix reference leaks on irq affinity notifiers

Fix the crash like this:

    BUG: Kernel NULL pointer dereference on read at 0x00000000
    Faulting instruction address: 0xc000000000c3447c
    Oops: Kernel access of bad area, sig: 11 [#1]
    LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
    CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1
    ...
    NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0
    LR [c000000000088354] vmemmap_free+0x144/0x320
    Call Trace:
       section_deactivate+0x220/0x240
       __remove_pages+0x118/0x170
       arch_remove_memory+0x3c/0x150
       memunmap_pages+0x1cc/0x2f0
       devm_action_release+0x30/0x50
       release_nodes+0x2f8/0x3e0
       device_release_driver_internal+0x168/0x270
       unbind_store+0x130/0x170
       drv_attr_store+0x44/0x60
       sysfs_kf_write+0x68/0x80
       kernfs_fop_write+0x100/0x290
       __vfs_write+0x3c/0x70
       vfs_write+0xcc/0x240
       ksys_write+0x7c/0x140
       system_call+0x5c/0x68

The crash is due to NULL dereference at

	test_bit(idx, ms->usage->subsection_map);

due to ms->usage = NULL in pfn_section_valid()

With commit d41e2f3b ("mm/hotplug: fix hot remove failure in
SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after
depopulate_section_mem().  This was done so that pfn_page() can work
correctly with kernel config that disables SPARSEMEM_VMEMMAP.  With that
config pfn_to_page does

	__section_mem_map_addr(__sec) + __pfn;

where

  static inline struct page *__section_mem_map_addr(struct mem_section *section)
  {
	unsigned long map = section->section_mem_map;
	map &= SECTION_MAP_MASK;
	return (struct page *)map;
  }

Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is
used to check the pfn validity (pfn_valid()).  Since section_deactivate
release mem_section->usage if a section is fully deactivated,
pfn_valid() check after a subsection_deactivate cause a kernel crash.

  static inline int pfn_valid(unsigned long pfn)
  {
  ...
	return early_section(ms) || pfn_section_valid(ms, pfn);
  }

where

  static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
  {
	int idx = subsection_map_index(pfn);

	return test_bit(idx, ms->usage->subsection_map);
  }

Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is
freed.  For architectures like ppc64 where large pages are used for
vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple
sections.  Hence before a vmemmap mapping page can be freed, the kernel
needs to make sure there are no valid sections within that mapping.
Clearing the section valid bit before depopulate_section_memap enables
this.

[aneesh.kumar@linux.ibm.com: add comment]
  Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comLink: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com
Fixes: d41e2f3b

 ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the
space for task stacks can be allocated using __vmalloc_node_range(),
alloc_pages_node() and kmem_cache_alloc_node().

In the first and the second cases page->mem_cgroup pointer is set, but
in the third it's not: memcg membership of a slab page should be
determined using the memcg_from_slab_page() function, which looks at
page->slab_cache->memcg_params.memcg .  In this case, using
mod_memcg_page_state() (as in account_kernel_stack()) is incorrect:
page->mem_cgroup pointer is NULL even for pages charged to a non-root
memory cgroup.

It can lead to kernel_stack per-memcg counters permanently showing 0 on
some architectures (depending on the configuration).

In order to fix it, let's introduce a mod_memcg_obj_state() helper,
which takes a pointer to a kernel object as a first argument, uses
mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls
mod_memcg_state().  It allows to handle all possible configurations
(CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without
spilling any memcg/kmem specifics into fork.c .

Note: This is a special version of the patch created for stable
backports.  It contains code from the following two patches:
  - mm: memcg/slab: introduce mem_cgroup_from_obj()
  - mm: fork: fix kernel_stack memcg stats for various stack implementations

[guro@fb.com: introduce mem_cgroup_from_obj()]
  Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com
Fixes: 4d96ba35

 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This appears to be a mistake in commit faced7e0 ("mm: hugetlb
controller for cgroups v2").

Essentially that commit does a hugetlb_cgroup_from_counter assuming that
page_counter_try_charge has initialized counter.

But if that has failed then it seems will not initialize counter, so
hugetlb_cgroup_from_counter(counter) ends up pointing to random memory,
causing kasan to complain.

The solution is to simply use 'h_cg', instead of
hugetlb_cgroup_from_counter(counter), since that is a reference to the
hugetlb_cgroup anyway.  After this change kasan ceases to complain.

Fixes: faced7e0

 ("mm: hugetlb controller for cgroups v2")
Reported-by:  <syzbot+cac0c4e204952cf449b1@syzkaller.appspotmail.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Giuseppe Scrivano <gscrivan@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/20200313223920.124230-1-almasrymina@google.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We see multiple issues with the implementation/interface to compute
whether a memory block can be offlined (exposed via
/sys/devices/system/memory/memoryX/removable) and would like to simplify
it (remove the implementation).

1. It runs basically lockless. While this might be good for performance,
   we see possible races with memory offlining that will require at
   least some sort of locking to fix.

2. Nowadays, more false positives are possible. No arch-specific checks
   are performed that validate if memory offlining will not be denied
   right away (and such check will require locking). For example, arm64
   won't allow to offline any memory block that was added during boot -
   which will imply a very high error rate. Other archs have other
   constraints.

3. The interface is inherently racy. E.g., if a memory block is detected
   to be removable (and was not a false positive at that time), there is
   still no guarantee that offlining will actually succeed. So any
   caller already has to deal with false positives.

4. It is unclear which performance benefit this interface actually
   provides. The introducing commit 5c755e9f ("memory-hotplug: add
   sysfs removable attribute for hotplug memory remove") mentioned

	"A user-level agent must be able to identify which sections
	 of memory are likely to be removable before attempting the
	 potentially expensive operation."

   However, no actual performance comparison was included.

Known users:

 - lsmem: Will group memory blocks based on the "removable" property. [1]

 - chmem: Indirect user. It has a RANGE mode where one can specify
          removable ranges identified via lsmem to be offlined. However,
          it also has a "SIZE" mode, which allows a sysadmin to skip the
          manual "identify removable blocks" step. [2]

 - powerpc-utils: Uses the "removable" attribute to skip some memory
          blocks right away when trying to find some to offline+remove.
          However, with ballooning enabled, it already skips this
          information completely (because it once resulted in many false
          negatives). Therefore, the implementation can deal with false
          positives properly already. [3]

According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer
driven from userspace via the drmgr command (powerpc-utils).  Nowadays
it's managed in the kernel - including onlining/offlining of memory
blocks - triggered by drmgr writing to /sys/kernel/dlpar.  So the
affected legacy userspace handling is only active on old kernels.  Only
very old versions of drmgr on a new kernel (unlikely) might execute
slower - totally acceptable.

With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not
break any user space tool.  We implement a very bad heuristic now.
Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report
"not removable" as before.

Original discussion can be found in [4] ("[PATCH RFC v1] mm:
is_mem_section_removable() overhaul").

Other users of is_mem_section_removable() will be removed next, so that
we can remove is_mem_section_removable() completely.

[1] http://man7.org/linux/man-pages/man1/lsmem.1.html
[2] http://man7.org/linux/man-pages/man8/chmem.8.html
[3] https://github.com/ibm-power-utilities/powerpc-utils
[4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com

Also, this patch probably fixes a crash reported by Steve.
http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.com



Reported-by: "Scargall, Steve" <steve.scargall@intel.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Nathan Fontenot <ndfont@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Karel Zak <kzak@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

claim_swapfile() currently keeps the inode locked when it is successful,
or the file is already swapfile (with -EBUSY).  And, on the other error
cases, it does not lock the inode.

This inconsistency of the lock state and return value is quite confusing
and actually causing a bad unlock balance as below in the "bad_swap"
section of __do_sys_swapon().

This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE
check out of claim_swapfile().  The inode is unlocked in
"bad_swap_unlock_inode" section, so that the inode is ensured to be
unlocked at "bad_swap".  Thus, error handling codes after the locking now
jumps to "bad_swap_unlock_inode" instead of "bad_swap".

    =====================================
    WARNING: bad unlock balance detected!
    5.5.0-rc7+ #176 Not tainted
    -------------------------------------
    swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550
    but there are no more locks to release!

    other info that might help us debug this:
    no locks held by swapon/4294.

    stack backtrace:
    CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176
    Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014
    Call Trace:
     dump_stack+0xa1/0xea
     print_unlock_imbalance_bug.cold+0x114/0x123
     lock_release+0x562/0xed0
     up_write+0x2d/0x490
     __do_sys_swapon+0x94b/0x3550
     __x64_sys_swapon+0x54/0x80
     do_syscall_64+0xa4/0x4b0
     entry_SYSCALL_64_after_hwframe+0x49/0xbe
    RIP: 0033:0x7f15da0a0dc7

Fixes: 1638045c

 ("mm: set S_SWAPFILE on blockdev swap devices")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Qais Youef <qais.yousef@arm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes follwoing warning:

block/blk-core.c: In function ‘blk_alloc_queue’:
block/blk-core.c:558:10: warning: returning ‘int’ from a function with return type ‘struct request_queue *’ makes pointer from integer without a cast [-Wint-conversion]
   return -EINVAL;

Fixes: 3d745ea5

 ("block: simplify queue allocation")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Move away from the deprecated API.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-i3c/20200326211002.13241-2-wsa+renesas@sang-engineering.com

Pull networking fixes from David Miller:

 1) Fix memory leak in vti6, from Torsten Hilbrich.

 2) Fix double free in xfrm_policy_timer, from YueHaibing.

 3) NL80211_ATTR_CHANNEL_WIDTH attribute is put with wrong type, from
    Johannes Berg.

 4) Wrong allocation failure check in qlcnic driver, from Xu Wang.

 5) Get ks8851-ml IO operations right, for real this time, from Marek
    Vasut.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
  r8169: fix PHY driver check on platforms w/o module softdeps
  net: ks8851-ml: Fix IO operations, again
  mlxsw: spectrum_mr: Fix list iteration in error path
  qlcnic: Fix bad kzalloc null test
  mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX
  mac80211: mark station unauthorized before key removal
  mac80211: Check port authorization in the ieee80211_tx_dequeue() case
  cfg80211: Do not warn on same channel at the end of CSA
  mac80211: drop data frames without key on encrypted links
  ieee80211: fix HE SPR size calculation
  nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type
  xfrm: policy: Fix doulbe free in xfrm_policy_timer
  bpf: Explicitly memset some bpf info structures declared on the stack
  bpf: Explicitly memset the bpf_attr structure
  bpf: Sanitize the bpf_struct_ops tcp-cc name
  vti6: Fix memory leak of skb if input policy check fails
  esp: remove the skb from the chain when it's enqueued in cryptd_wq
  ipv6: xfrm6_tunnel.c: Use built-in RCU list checking
  xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
  xfrm: fix uctx len check in verify_sec_ctx_len
  ...

Pull i2c fixes from Wolfram Sang:
 "Three more driver bugfixes, and two doc improvements fixing build
  warnings while we are here"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pca-platform: Use platform_irq_get_optional
  i2c: st: fix missing struct parameter description
  i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()
  i2c: fix a doc warning
  i2c: hix5hd2: add missed clk_disable_unprepare in remove

Pull SCSI fixes from James Bottomley:
 "Two small fixes: one in drivers (qla2xxx), and one in the core (sd) to
  try to cope with USB enclosures that silently change reported
  parameters"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Fix optimal I/O size for devices that change reported values
  scsi: qla2xxx: Fix I/Os being passed down when FC device is being deleted

This email address will not be available in a few days.
Update my own email address to xiang@kernel.org, which
should be available all the time.

Link: https://lore.kernel.org/r/20200328040036.117974-1-gaoxiang25@huawei.com


Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>

The interrupt is not required so use platform_irq_get_optional() to
avoid error messages like

  i2c-pca-platform 22080000.i2c: IRQ index 0 not found

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Fix a missing struct parameter description to allow
warning free W=1 compilation.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Daniel Borkmann says:

====================
pull-request: bpf 2020-03-27

The following pull-request contains BPF updates for your *net* tree.

We've added 3 non-merge commits during the last 4 day(s) which contain
a total of 4 files changed, 25 insertions(+), 20 deletions(-).

The main changes are:

1) Explicitly memset the bpf_attr structure on bpf() syscall to avoid
   having to rely on compiler to do so. Issues have been noticed on
   some compilers with padding and other oddities where the request was
   then unexpectedly rejected, from Greg Kroah-Hartman.

2) Sanitize the bpf_struct_ops TCP congestion control name in order to
   avoid problematic characters such as whitespaces, from Martin KaFai Lau.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

On Android/x86 the module loading infrastructure can't deal with
softdeps. Therefore the check for presence of the Realtek PHY driver
module fails. mdiobus_register() will try to load the PHY driver
module, therefore move the check to after this call and explicitly
check that a dedicated PHY driver is bound to the PHY device.

Fixes: f3259377

 ("r8169: check that Realtek PHY driver module is loaded")
Reported-by: Chih-Wei Huang <cwhuang@android-x86.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2020-03-27

1) Handle NETDEV_UNREGISTER for xfrm device to handle asynchronous
   unregister events cleanly. From Raed Salem.

2) Fix vti6 tunnel inter address family TX through bpf_redirect().
   From Nicolas Dichtel.

3) Fix lenght check in verify_sec_ctx_len() to avoid a
   slab-out-of-bounds. From Xin Long.

4) Add a missing verify_sec_ctx_len check in xfrm_add_acquire
   to avoid a possible out-of-bounds to access. From Xin Long.

5) Use built-in RCU list checking of hlist_for_each_entry_rcu
   to silence false lockdep warning in __xfrm6_tunnel_spi_lookup
   when CONFIG_PROVE_RCU_LIST is enabled. From Madhuparna Bhowmik.

6) Fix a panic on esp offload when crypto is done asynchronously.
   From Xin Long.

7) Fix a skb memory leak in an error path of vti6_rcv.
   From Torsten Hilbrich.

8) Fix a race that can lead to a doulbe free in xfrm_policy_timer.
   From Xin Long.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>