Commit b2d4b150

(smsc95xx: enable dynamic autosuspend) implements
autosuspend, but breaks current runtime suspend, such as:
when the interface becomes down, the usb device can't be put into
runtime suspend any more.

This patch fixes the broken runtime suspend.

Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The three below functions:

	smsc95xx_enter_suspend0()
	smsc95xx_enter_suspend1()
	smsc95xx_enter_suspend2()

return > 0 in case of success, so they will cause smsc95xx_suspend()
to return > 0 and cause suspend failure.

The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling
in suspend failure case).

Cc: <stable@vger.kernel.org>		[3.8]
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We were using the same variable for iterating two nested loops.

Reported-by: Tijs Van Buggenhout <tvb@able.be>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On unload, b43 produces a lockdep warning that can be summarized in the
following way:

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.8.0-wl+ #117 Not tainted
 -------------------------------------------------------
 modprobe/5557 is trying to acquire lock:
  ((&wl->firmware_load)){+.+.+.}, at: [<ffffffff81062160>] flush_work+0x0/0x2a0

 but task is already holding lock:
  (rtnl_mutex){+.+.+.}, at: [<ffffffff813bd7d2>] rtnl_lock+0x12/0x20

 which lock already depends on the new lock.
 [ INFO: possible circular locking dependency detected ]
 ======================================================

The full output is available at http://lkml.indiana.edu/hypermail/linux/kernel/1302.3/00060.html.
To summarize, commit 6b6fa586

 added a 'cancel_work_sync(&wl->firmware_load)'
call in the wrong place.

The fix is to move the cancel_work_sync() call to b43_bcma_remove() and
b43_ssb_remove(). Thanks to Johannes Berg and Michael Buesch for help in
diagnosing the log output.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V3.5+]
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit eb6b9a8c

.

Above commit limits GSO capability of gre device to just TSO, but
software GRE-GSO is capable of handling all GSO capabilities.

This patch also fixes following panic which reverted commit introduced:-

BUG: unable to handle kernel NULL pointer dereference at 00000000000000a2
IP: [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre]
PGD 42bc19067 PUD 42bca9067 PMD 0
Oops: 0000 [#1] SMP
Pid: 2636, comm: ip Tainted: GF            3.8.0+ #83 Dell Inc. PowerEdge R620/0KCKR5
RIP: 0010:[<ffffffffa0680fd1>]  [<ffffffffa0680fd1>] ipgre_tunnel_bind_dev+0x161/0x1f0 [ip_gre]
RSP: 0018:ffff88042bfcb708  EFLAGS: 00010246
RAX: 00000000000005b6 RBX: ffff88042d2fa000 RCX: 0000000000000044
RDX: 0000000000000018 RSI: 0000000000000078 RDI: 0000000000000060
RBP: ffff88042bfcb748 R08: 0000000000000018 R09: 000000000000000c
R10: 0000000000000020 R11: 000000000101010a R12: ffff88042d2fa800
R13: 0000000000000000 R14: ffff88042d2fa800 R15: ffff88042cd7f650
FS:  00007fa784f55700(0000) GS:ffff88043fd20000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a2 CR3: 000000042d8b9000 CR4: 00000000000407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process ip (pid: 2636, threadinfo ffff88042bfca000, task ffff88042d142a80)
Stack:
 0000000100000000 002f000000000000 0a01010100000000 000000000b010101
 ffff88042d2fa800 ffff88042d2fa000 ffff88042bfcb858 ffff88042f418c00
 ffff88042bfcb798 ffffffffa068199a ffff88042bfcb798 ffff88042d2fa830
Call Trace:
 [<ffffffffa068199a>] ipgre_newlink+0xca/0x160 [ip_gre]
 [<ffffffff8143b692>] rtnl_newlink+0x532/0x5f0
 [<ffffffff8143b2fc>] ? rtnl_newlink+0x19c/0x5f0
 [<ffffffff81438978>] rtnetlink_rcv_msg+0x2c8/0x340
 [<ffffffff814386b0>] ? rtnetlink_rcv+0x40/0x40
 [<ffffffff814560f9>] netlink_rcv_skb+0xa9/0xd0
 [<ffffffff81438695>] rtnetlink_rcv+0x25/0x40
 [<ffffffff81455ddc>] netlink_unicast+0x1ac/0x230
 [<ffffffff81456a45>] netlink_sendmsg+0x265/0x380
 [<ffffffff814138c0>] sock_sendmsg+0xb0/0xe0
 [<ffffffff8141141e>] ? move_addr_to_kernel+0x4e/0x90
 [<ffffffff81420445>] ? verify_iovec+0x85/0xf0
 [<ffffffff81414ffd>] __sys_sendmsg+0x3fd/0x420
 [<ffffffff8114b701>] ? handle_mm_fault+0x251/0x3b0
 [<ffffffff8114f39f>] ? vma_link+0xcf/0xe0
 [<ffffffff81415239>] sys_sendmsg+0x49/0x90
 [<ffffffff814ffd19>] system_call_fastpath+0x16/0x1b

CC: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit "ip_gre: allow CSUM capable devices to handle packets"
aa0e51cd

, broke GRE_CSUM case.
GRE_CSUM needs checksum computed for inner packet. Therefore
csum-calculation can not be offloaded if tunnel device requires
GRE_CSUM.  Following patch fixes it by computing inner packet checksum
for GRE_CSUM type, for all other type of GRE devices csum is offloaded.

CC: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tunnel_ip_select_ident() is more efficient when generating ip-header
id given inner packet is of ipv4 type.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GRE-GSO generates ip fragments with id 0,2,3,4... for every
GSO packet, which is not correct. Following patch fixes it
by setting ip-header id unique id of fragments are allowed.
As Eric Dumazet suggested it is optimized by using inner ip-header
whenever inner packet is ipv4.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John W. Linville says:

====================
This is a batch of fixes intended for the 3.9 stream...

Avinash Patil gives us a mwifiex fix to prevent a system freeze when
that driver is unloaded.

Daniel Drake brings a patch to avoid dropping the carrier flag across a
suspend.  This prevents improper packet drops.

Wei Yongjun delivers a brcmfmac for a lock leak on an error path.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Fix missing () & { }

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Noticed that vmxnet3's get_ringparam function was returning the summation of all
ring buffers on a NIC, rather than just the size of any one ring.  This causes
problems when a vmxnet3 instance has multiple queues, as ethtool, when setting
ring parameters, first gets the current ring parameters to set the existing
values in the set_ringparm commannd.  The result is, that unless both rx and tx
ring sizes are set in a single operation, which ever ring is not set will
silently have its ring count multiplied by the number of queues on the NIC until
it reaches a driver defined maxiumum value.

Fix it by not multiplying the rx and tx ring sizes by the number of queues in
the system, like every other driver.  Tested by myself successfully.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sparse warned about several functions that were unnecessarily global.
After making them static, discovered that several functions were actually never used.

Compile tested only.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Eilon Greenstein <eilong@broadcomo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ee873fda

 ("gianfar: Pack struct
gfar_priv_grp into three cachelines") moved the irq number and names
off into a separate struct and created accessors for them.  However
it was never tested with NET_POLL enabled, and so some conversions
that were simply overlooked went undetected until now.

Make the netpoll ones also use the gfar_irq() accessors.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Cc: Jianhua Xie <jianhua.xie@freescale.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two places to call vlan_set_encap_proto():
vlan_untag() and __pop_vlan_tci().

vlan_untag() assumes skb->data points after mac addr, otherwise
the following code

        vhdr = (struct vlan_hdr *) skb->data;
        vlan_tci = ntohs(vhdr->h_vlan_TCI);
        __vlan_hwaccel_put_tag(skb, vlan_tci);

        skb_pull_rcsum(skb, VLAN_HLEN);

won't be correct. But __pop_vlan_tci() assumes points _before_
mac addr.

In vlan_set_encap_proto(), it looks for some magic L2 value
after mac addr:

        rawp = skb->data;
        if (*(unsigned short *) rawp == 0xFFFF)
	...

Therefore __pop_vlan_tci() is obviously wrong.

A quick fix is avoiding using skb->data in vlan_set_encap_proto(),
use 'vhdr+1' is always correct in both cases.

Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Gross <jesse@nicira.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sock_diag_lock_handler() and sock_diag_unlock_handler() actually
make the code less readable. Get rid of them and make the lock usage
and access to sock_diag_handlers[] clear on the first sight.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Userland can send a netlink message requesting SOCK_DIAG_BY_FAMILY
with a family greater or equal then AF_MAX -- the array size of
sock_diag_handlers[]. The current code does not test for this
condition therefore is vulnerable to an out-of-bound access opening
doors for a privilege escalation.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlx4_en driver allocates the number of objects for the CPU affinity
reverse-map based on the number of rx rings of the device. However,
mlx4_assign_eq() calls irq_cpu_rmap_add() as many times as IRQ's are
assigned to EQ's, which can be as large as mlx4_dev->caps.comp_pool. If
caps.comp_pool is larger than rx_ring_num we will eventually hit the
BUG_ON() in cpu_rmap_add().

Fix this problem by allocating space for the maximum number of CPU
affinity reverse-map objects we might want to add.

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The memory to hold the network device tx_cq is not being allocated with
the correct size in mlx4_en_init_netdev(). It should use MAX_TX_RINGS
instead of MAX_RX_RINGS. This can cause problems if the number of tx
rings being used is greater than MAX_RX_RINGS.

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In fast open the sender unncessarily reduces the space available
for data in SYN by 12 bytes.  This is because in the sender
incorrectly reserves space for TS option twice in tcp_send_syn_data():
tcp_mtu_to_mss() already accounts for TS option space. But it further
reserves MAX_TCP_OPTION_SPACE when computing the payload space.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mem cgroup socket limit is only used if the config option is
enabled. Found with sparse

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dave Jones reported a lockdep splat occurring in IP defrag code.

commit 6d7b857d

 (net: use lib/percpu_counter API for
fragmentation mem accounting) added a possible deadlock.

Because percpu_counter_sum_positive() needs to acquire
a lock that can be used from softirq, we need to disable BH
in sum_frag_mem_limit()

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 7f7d6c28

 (net: fec: Ensure that initialization is done prior to
request_irq()) placed fec_ptp_init() into a point that ptp clock was not
available, which causes a division by zero in fec_ptp_start_cyclecounter():

[   17.895723] Division by zero in kernel.
[   17.899571] Backtrace:
[   17.902094] [<80012564>] (dump_backtrace+0x0/0x10c) from [<8056deec>]
(dump_stack+0x18/0x1c)
[   17.910539]  r6:bfba8500 r5:8075c950 r4:bfba8000 r3:bfbd0000
[   17.916284] [<8056ded4>] (dump_stack+0x0/0x1c) from [<80012688>]
(__div0+0x18/0x20)
[   17.923968] [<80012670>] (__div0+0x0/0x20) from [<802829c4>] (Ldiv0+0x8/0x10)
[   17.931140] [<80398534>] (fec_ptp_start_cyclecounter+0x0/0x110) from
[<80394f64>] (fec_restart+0x6c8/0x754)
[   17.940898] [<8039489c>] (fec_restart+0x0/0x754) from [<803969a0>]
(fec_enet_adjust_link+0xdc/0x108)
[   17.950046] [<803968c4>] (fec_enet_adjust_link+0x0/0x108) from [<80390bc4>]
(phy_state_machine+0x178/0x534)
...

Fix this by rearraging the code so that fec_ptp_init() is called only after
the clocks have been properly acquired.

Tested on both mx53 and mx6 platforms.

Reported-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Smatch found a locking bug in netif_set_xps_queue in which we were not
releasing the lock in the case of an allocation failure.

This change corrects that so that we release the xps_map_mutex before
returning -ENOMEM in the case of an allocation failure.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now we handle icmp errors in each transport protocol's err_handler,
for icmp protocols, that is ping_err. Since this handler only care
of those icmp errors triggered by echo request, errors triggered
by echo reply(which sent by kernel) are sliently ignored.

So wrap ping_err() with icmp_err() to deal with those icmp errors.

Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the missing unlock before return from function brcmf_notify_vif_event()
in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Unload sequence for mwifiex PCIE driver is as follows:
1. Invoking cleanup module from kernel results into
   pci_unregister_driver
2. Kernel invokes PCIE remove() handler which disconnects all
   interfaces.
3. One step during disconnect is to clean PCIE TX rings.
   During this we read txbd_rdptr from FW.

While loading driver next time, we see pci_enable_device()
results into system freeze. This may have happened because we
accessed PCI device after unregistering from bus driver.
Removing this ioread() operation resolves this bug.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

If the system suspends with mwifiex wifi powered on, and is then woken
by an ICMP ping packet, the ping response is discarded by the kernel
because the kernel incorrectly thinks there is no carrier.

I can't see any valid reason to want to report loss of carrier here,
so remove the offending code.

Fixes http://dev.laptop.org/ticket/12554

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

It looks like its possible to open thousands of TCP IPv6
sessions on a server, all landing in a single slot of TCP hash
table. Incoming packets have to lookup sockets in a very
long list.

We should hash all bits from foreign IPv6 addresses, using
a salt and hash mix, not a simple XOR.

inet6_ehashfn() can also separately use the ports, instead
of xoring them.

Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Use correct function to clear loopback mode.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently request_irq() is called prior to fec_enet_init() and fec_ptp_init(),
which causes the following crash on a mx53qsb:

Unable to handle kernel NULL pointer dereference at virtual address 00000002
pgd = 80004000
[00000002] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0    Not tainted  (3.8.0-rc7-next-20130215+ #346)
PC is at fec_enet_interrupt+0xd0/0x348
LR is at fec_enet_interrupt+0xb8/0x348
pc : [<80372b7c>]    lr : [<80372b64>]    psr: 60000193
sp : df855c20  ip : df855c20  fp : df855c74
r10: 00000516  r9 : 1c000000  r8 : 00000000
r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : df9b7800
r3 : df9b7df4  r2 : 00000000  r1 : 00000000  r0 : df9b7d34

Ensure that such initialization functions are called prior to requesting the
interrupts, so that all necessary the data structures are in place when the
irqs occur.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should get 'type' and 'code' from the outer ICMP header.

Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...

Pull sparc updates from David Miller:
 "Mostly more sparc64 THP bug fixes, and a refactoring of SMP bootup on
  sparc32 from Sam Ravnborg."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: refactor smp boot
  sparc64: Fix huge PMD to PTE translation for sun4u in TLB miss handler.
  sparc64: Fix tsb_grow() in atomic context.
  sparc64: Handle hugepage TSB being NULL.
  sparc64: Fix gfp_flags setting in tsb_grow().

Pull arm64 patches from Catalin Marinas:

 - SMP support for the PSCI booting protocol (power state coordination
   interface).

 - Simple earlyprintk support.

 - Platform devices populated by default from the DT (SoC-agnostic).

 - CONTEXTIDR support (used by external trace tools).

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: mm: update CONTEXTIDR register to contain PID of current process
  arm64: atomics: fix grossly inconsistent asm constraints for exclusives
  arm64: compat: use compat_uptr_t type for compat_ucontext.uc_link
  arm64: Select ARCH_WANT_FRAME_POINTERS
  arm64: Add kvm_para.h and xor.h generic headers
  arm64: SMP: enable PSCI boot method
  arm64: psci: add support for PSCI invocations from the kernel
  arm64: SMP: rework the SMP code to be enabling method agnostic
  arm64: perf: add guest vs host discrimination
  arm64: add COMPAT_PSR_*_BIT flags
  arm64: Add simple earlyprintk support
  arm64: Populate the platform devices

Pull ARM updates (part two) from Russell King:

 - breakpoint and perf updates from Will Deacon.

 - hypervisor boot mode updates from Will.

 - support for Power State Coordination Interface via the Hypervisor

 - core ARM support for KVM

* 'for-linus-2' of git://git.linaro.org/people/rmk/linux-arm: (32 commits)
  KVM: ARM: Add maintainer entry for KVM/ARM
  KVM: ARM: Power State Coordination Interface implementation
  KVM: ARM: Handle I/O aborts
  KVM: ARM: Handle guest faults in KVM
  KVM: ARM: VFP userspace interface
  KVM: ARM: Demux CCSIDR in the userspace API
  KVM: ARM: User space API for getting/setting co-proc registers
  KVM: ARM: Emulation framework and CP15 emulation
  KVM: ARM: World-switch implementation
  KVM: ARM: Inject IRQs and FIQs from userspace
  KVM: ARM: Memory virtualization setup
  KVM: ARM: Hypervisor initialization
  KVM: ARM: Initial skeleton to compile KVM support
  ARM: Section based HYP idmap
  ARM: Add page table and page defines needed by KVM
  ARM: perf: simplify __hw_perf_event_init err handling
  ARM: perf: remove unnecessary checks for idx < 0
  ARM: perf: handle armpmu_register failing
  ARM: perf: don't pretend to support counting of L1I writes
  ARM: perf: remove redundant NULL check on cpu_pmu
  ...