- Feb 09, 2021
-
-
Naohiro Aota authored
If more than one IO is issued for one file extent, these IO can be written to separate regions on a device. Since we cannot map one file extent to such a separate area on a zoned filesystem, we need to follow the "one IO == one ordered extent" rule. The normal buffered, uncompressed and not pre-allocated write path (used by cow_file_range()) sometimes does not follow this rule. It can write a part of an ordered extent when specified a region to write e.g., when its called from fdatasync(). Introduce a dedicated (uncompressed buffered) data write path for zoned filesystems, that will COW the region and write it at once. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Likewise to buffered IO, enable zone append writing for direct IO when its used on a zoned block device. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Enable zone append writing for zoned mode. When using zone append, a bio is issued to the start of a target zone and the device decides to place it inside the zone. Upon completion the device reports the actual written position back to the host. Three parts are necessary to enable zone append mode. First, modify the bio to use REQ_OP_ZONE_APPEND in btrfs_submit_bio_hook() and adjust the bi_sector to point the beginning of the zone. Second, record the returned physical address (and disk/partno) to the ordered extent in end_bio_extent_writepage() after the bio has been completed. We cannot resolve the physical address to the logical address because we can neither take locks nor allocate a buffer in this end_bio context. So, we need to record the physical address to resolve it later in btrfs_finish_ordered_io(). And finally, rewrite the logical addresses of the extent mapping and checksum data according to the physical address using btrfs_rmap_block. If the returned address matches the originally allocated address, we can skip this rewriting process. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Johannes Thumshirn authored
A following patch will add another caller of btrfs_lookup_ordered_extent(), but from a bio's endio context. btrfs_lookup_ordered_extent() uses spin_lock_irq() which unconditionally disables interrupts. Change this to spin_lock_irqsave() so interrupts aren't disabled and re-enabled unconditionally. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Johannes Thumshirn authored
On a zoned filesystem, cache if a block group is on a sequential write only zone. On sequential write only zones, we can use REQ_OP_ZONE_APPEND for writing data, therefore provide btrfs_use_zone_append() to figure out if IO is targeting a sequential write only zone and we can use REQ_OP_ZONE_APPEND for data writing. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
btrfs_rmap_block currently reverse-maps the physical addresses on all devices to the corresponding logical addresses. Extend the function to match to a specified device. The old functionality of querying all devices is left intact by specifying NULL as target device. A block_device instead of a btrfs_device is passed into btrfs_rmap_block, as this function is intended to reverse-map the result of a bio, which only has a block_device. Also export the function for later use. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Johannes Thumshirn authored
To ensure that an ordered extent maps to a contiguous region on disk, we need to maintain a "one bio == one ordered extent" rule. Ensure that constructing bio does not span more than an ordered extent. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
For a zone append write, the device decides the location the data is being written to. Therefore we cannot ensure that two bios are written consecutively on the device. In order to ensure that an ordered extent maps to a contiguous region on disk, we need to maintain a "one bio == one ordered extent" rule. Implement splitting of an ordered extent and extent map on bio submission to adhere to the rule. extract_ordered_extent() hooks into btrfs_submit_data_bio() and splits the corresponding ordered extent so that the ordered extent's region fits into one bio and the corresponding device limits. Several sanity checks need to be done in extract_ordered_extent() e.g. - We cannot split once end_bio'd ordered extent because we cannot divide ordered->bytes_left for the split ones - We do not expect a compressed ordered extent - We should not have checksum list because we omit the list splitting. Since the function is called before btrfs_wq_submit_bio() or btrfs_csum_one_bio(), this should be always ensured. We also need to split an extent map by creating a new one. If not, unpin_extent_cache() complains about the difference between the start of the extent map and the file's logical offset. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Zoned filesystems use REQ_OP_ZONE_APPEND bios for writing to actual devices. Let btrfs_end_bio() and btrfs_op be aware of it, by mapping REQ_OP_ZONE_APPEND to BTRFS_MAP_WRITE and using btrfs_op() instead of bio_op(). Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
A zoned device has its own hardware restrictions e.g. max_zone_append_size when using REQ_OP_ZONE_APPEND. To follow these restrictions, use bio_add_zone_append_page() instead of bio_add_page(). We need target device to use bio_add_zone_append_page(), so this commit reads the chunk information to cache the target device to btrfs_io_bio(bio)->device. Caching only the target device is sufficient here as zoned filesystems only supports the single profile at the moment. Once more profiles will be supported btrfs_io_bio can hold an extent_map to be able to check for the restrictions of all devices the btrfs_bio will be mapped to. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Factor out adding a page to a bio from submit_extent_page(). The page is added only when bio_flags are the same, contiguous and the added page fits in the same stripe as pages in the bio. Condition checks are reordered to allow early return to avoid possibly heavy btrfs_bio_fits_in_stripe() calling. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
We must reset the zones of a deleted unused block group to rewind the zones' write pointers to the zones' start. To do this, we can use the DISCARD_SYNC code to do the reset when the filesystem is running on zoned devices. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Since the allocation info of a tree log node is not recorded in the extent tree, calculate_alloc_pointer() cannot detect this node, so the pointer can be over a tree node. Replaying the log calls btrfs_remove_free_space() for each node in the log tree. So, advance the pointer after the node to not allocate over it. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Tree manipulating operations like merging nodes often release once-allocated tree nodes. Such nodes are cleaned so that pages in the node are not uselessly written out. On zoned volumes, however, such optimization blocks the following IOs as the cancellation of the write out of the freed blocks breaks the sequential write sequence expected by the device. Introduce a list of clean and unwritten extent buffers that have been released in a transaction. Redirty the buffers so that btree_write_cache_pages() can send proper bios to the devices. Besides it clears the entire content of the extent buffer not to confuse raw block scanners e.g. 'btrfs check'. By clearing the content, csum_dirty_buffer() complains about bytenr mismatch, so avoid the checking and checksum using newly introduced buffer flag EXTENT_BUFFER_NO_CHECK. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Implement a sequential extent allocator for zoned filesystems. This allocator only needs to check if there is enough space in the block group after the allocation pointer to satisfy the extent allocation request. Therefore the allocator never manages bitmaps or clusters. Also, add assertions to the corresponding functions. As zone append writing is used, it would be unnecessary to track the allocation offset, as the allocator only needs to check available space. But by tracking and returning the offset as an allocated region, we can skip modification of ordered extents and checksum information when there is no IO reordering. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
In a zoned filesystem a once written then freed region is not usable until the underlying zone has been reset. So we need to distinguish such unusable space from usable free space. Therefore we need to introduce the "zone_unusable" field to the block group structure, and "bytes_zone_unusable" to the space_info structure to track the unusable space. Pinned bytes are always reclaimed to the unusable space. But, when an allocated region is returned before using e.g., the block group becomes read-only between allocation time and reservation time, we can safely return the region to the block group. For the situation, this commit introduces "btrfs_add_free_space_unused". This behaves the same as btrfs_add_free_space() on regular filesystem. On zoned filesystems, it rewinds the allocation offset. Because the read-only bytes tracks free but unusable bytes when the block group is read-only, we need to migrate the zone_unusable bytes to read-only bytes when a block group is marked read-only. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Conventional zones do not have a write pointer, so we cannot use it to determine the allocation offset for sequential allocation if a block group contains a conventional zone. But instead, we can consider the end of the highest addressed extent in the block group for the allocation offset. For new block group, we cannot calculate the allocation offset by consulting the extent tree, because it can cause deadlock by taking extent buffer lock after chunk mutex, which is already taken in btrfs_make_block_group(). Since it is a new block group anyways, we can simply set the allocation offset to 0. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
A zoned filesystem must allocate blocks at the zones' write pointer. The device's write pointer position can be mapped to a logical address within a block group. To facilitate this, add an "alloc_offset" to the block-group to track the logical addresses of the write pointer. This logical address is populated in btrfs_load_block_group_zone_info() from the write pointers of corresponding zones. For now, zoned filesystems the single profile. Supporting non-single profile with zone append writing is not trivial. For example, in the DUP profile, we send a zone append writing IO to two zones on a device. The device reply with written LBAs for the IOs. If the offsets of the returned addresses from the beginning of the zone are different, then it results in different logical addresses. We need fine-grained logical to physical mapping to support such separated physical address issue. Since it should require additional metadata type, disable non-single profiles for now. This commit supports the case all the zones in a block group are sequential. The next patch will handle the case having a conventional zone. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Add a check in verify_one_dev_extent() to ensure that a device extent on a zoned block device is aligned to the respective zone boundary. If it isn't, mark the filesystem as unclean. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Implement a zoned chunk and device extent allocator. One device zone becomes a device extent so that a zone reset affects only this device extent and does not change the state of blocks in the neighbor device extents. To implement the allocator, we need to extend the following functions for a zoned filesystem. - init_alloc_chunk_ctl - dev_extent_search_start - dev_extent_hole_check - decide_stripe_size init_alloc_chunk_ctl_zoned() is mostly the same as regular one. It always set the stripe_size to the zone size and aligns the parameters to the zone size. dev_extent_search_start() only aligns the start offset to zone boundaries. We don't care about the first 1MB like in regular filesystem because we anyway reserve the first two zones for superblock logging. dev_extent_hole_check_zoned() checks if zones in given hole are either conventional or empty sequential zones. Also, it skips zones reserved for superblock logging. With the change to the hole, the new hole may now contain pending extents. So, in this case, loop again to check that. Finally, decide_stripe_size_zoned() should shrink the number of devices instead of stripe size because we need to honor stripe_size == zone_size. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Johannes Thumshirn authored
Run a zoned filesystem on non-zoned devices. This is done by "slicing up" the block device into static sized chunks and fake a conventional zone on each of them. The emulated zone size is determined from the size of device extent. This is mainly aimed at testing of zoned filesystems, i.e. the zoned chunk allocator, on regular block devices. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
The implementation of fitrim depends on space cache, which is not used and disabled for zoned extent allocator. So the current code does not work with zoned filesystem. In the future, we can implement fitrim for zoned filesystems by enabling space cache (but, only for fitrim) or scanning the extent tree at fitrim time. For now, disallow fitrim on zoned filesystems. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Johannes Thumshirn authored
Don't set the zoned flag in fs_info as soon as we're encountering the incompat filesystem flag for a zoned filesystem on mount. The zoned flag in fs_info is in a union together with the zone_size, so setting it too early will result in setting an incorrect zone_size as well. Once the correct zone_size is read from the device, we can rely on the zoned flag in fs_info as well to determine if the filesystem is zoned. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Johannes Thumshirn authored
Since we have no write pointer in conventional zones, we cannot determine the allocation offset from it. Instead, we set the allocation offset after the highest addressed extent. This is done by reading the extent tree in btrfs_load_block_group_zone_info(). However, this function is called from btrfs_read_block_groups(), so the read lock for the tree node could be recursively taken. To avoid this unsafe locking scenario, release the path before reading the extent tree to get the allocation offset. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
A zoned filesystem currently has a superblock at the beginning of the superblock logging zones if the zones are conventional. This difference in superblock position causes a chicken-and-egg problem for filesystems with emulated zones. Since the device is a regular (non-zoned) device, we cannot know if the filesystem is regular or zoned while reading the superblock. But, to load the superblock, we need to see if it is emulated zoned or not. Place the superblocks at the same location as they are on regular filesystem on regular devices to solve the problem. It is possible because it's ensured that all the superblock locations are at an (emulated) conventional zone on regular devices. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
This is a preparation patch to implement zone emulation on a regular device. To emulate a zoned filesystem on a regular (non-zoned) device, we need to decide an emulated zone size. Instead of making it a compile-time static value, we'll make it configurable at mkfs time. Since we have one zone == one device extent restriction, we can determine the emulated zone size from the size of a device extent. We can extend btrfs_get_dev_zone_info() to show a regular device filled with conventional zones once the zone size is decided. The current call site of btrfs_get_dev_zone_info() during the mount process is earlier than loading the file system trees so that we don't know the size of a device extent at this point. Thus we can't slice a regular device to conventional zones. This patch introduces btrfs_get_dev_zone_info_all_devices to load the zone info for all the devices. And, it places this function in open_ctree() after loading the trees. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
A ZONE_APPEND bio must follow hardware restrictions (e.g. not exceeding max_zone_append_sectors) not to be split. bio_iov_iter_get_pages builds such restricted bio using __bio_iov_append_get_pages if bio_op(bio) == REQ_OP_ZONE_APPEND. To utilize it, we need to set the bio_op before calling bio_iov_iter_get_pages(). This commit introduces IOMAP_F_ZONE_APPEND, so that iomap user can set the flag to indicate they want REQ_OP_ZONE_APPEND and restricted bio. Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Johannes Thumshirn authored
Add bio_add_zone_append_page(), a wrapper around bio_add_hw_page() which is intended to be used by file systems that directly add pages to a bio instead of using bio_iov_iter_get_pages(). Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Filipe Manana authored
At btrfs_copy_root(), if the call to btrfs_inc_ref() fails we end up returning without unlocking and releasing our reference on the extent buffer named "cow" we previously allocated with btrfs_alloc_tree_block(). So fix that by unlocking the extent buffer and dropping our reference on it before returning. Fixes: be20aa9d ("Btrfs: Add mount option to turn off data cow") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
In read_extent_buffer_pages(), if we failed to lock the page atomically, we just exit with return value 0. This is counter-intuitive, as normally if we can't lock what we need, we would return something like EAGAIN. But that return hides under (wait == WAIT_NONE) branch, which only gets triggered for readahead. And for readahead, if we failed to lock the page, it means the extent buffer is either being read by other thread, or has been read and is under modification. Either way the eb will or has been cached, thus readahead has no need to wait for it. Add comment on this counter-intuitive behavior. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
This adds the basic RO mount ability for 4K sector size on 64K page system. Currently we only plan to support 4K and 64K page system. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
In btrfs data page read path, the page status update are handled in two different locations: btrfs_do_read_page() { while (cur <= end) { /* No need to read from disk */ if (HOLE/PREALLOC/INLINE){ memset(); set_extent_uptodate(); continue; } /* Read from disk */ ret = submit_extent_page(end_bio_extent_readpage); } end_bio_extent_readpage() { endio_readpage_uptodate_page_status(); } This is fine for sectorsize == PAGE_SIZE case, as for above loop we should only hit one branch and then exit. But for subpage, there is more work to be done in page status update: - Page Unlock condition Unlike regular page size == sectorsize case, we can no longer just unlock a page. Only the last reader of the page can unlock the page. This means, we can unlock the page either in the while() loop, or in the endio function. - Page uptodate condition Since we have multiple sectors to read for a page, we can only mark the full page uptodate if all sectors are uptodate. To handle both subpage and regular cases, introduce a pair of functions to help handling page status update: - begin_page_read() For regular case, it does nothing. For subpage case, it updates the reader counters so that later end_page_read() can know who is the last one to unlock the page. - end_page_read() This is just endio_readpage_uptodate_page_status() renamed. The original name is a little too long and too specific for endio. The new thing added is the condition for page unlock. Now for subpage data, we unlock the page if we're the last reader. This does not only provide the basis for subpage data read, but also hide the special handling of page read from the main read loop. Also, since we're changing how the page lock is handled, there are two existing error paths where we need to manually unlock the page before calling begin_page_read(). Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
To support subpage sector size, data also need extra info to make sure which sectors in a page are uptodate/dirty/... This patch will make pages for data inodes get btrfs_subpage structure attached, and detached when the page is freed. This patch also slightly changes the timing when set_page_extent_mapped() is called to make sure: - We have page->mapping set page->mapping->host is used to grab btrfs_fs_info, thus we can only call this function after page is mapped to an inode. One call site attaches pages to inode manually, thus we have to modify the timing of set_page_extent_mapped() a bit. - As soon as possible, before other operations Since memory allocation can fail, we have to do extra error handling. Calling set_page_extent_mapped() as soon as possible can simply the error handling for several call sites. The idea is pretty much the same as iomap_page, but with more bitmaps for btrfs specific cases. Currently the plan is to switch iomap if iomap can provide sector aligned write back (only write back dirty sectors, but not the full page, data balance require this feature). So we will stick to btrfs specific bitmap for now. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
For subpage metadata validation check, there are some differences: - Read must finish in one bvec Since we're just reading one subpage range in one page, it should never be split into two bios nor two bvecs. - How to grab the existing eb Instead of grabbing eb using page->private, we have to go search radix tree as we don't have any direct pointer at hand. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
To handle subpage status update, add the following: - Use btrfs_page_*() subpage-aware helpers to update page status Now we can handle both cases well. - No page unlock for subpage metadata Since subpage metadata doesn't utilize page locking at all, skip it. For subpage data locking, it's handled in later commits. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
Introduce a helper, read_extent_buffer_subpage(), to do the subpage extent buffer read. The difference between regular and subpage routines are: - No page locking Here we completely rely on extent locking. Page locking can reduce the concurrency greatly, as if we lock one page to read one extent buffer, all the other extent buffers in the same page will have to wait. - Extent uptodate condition Despite the existing PageUptodate() and EXTENT_BUFFER_UPTODATE check, We also need to check btrfs_subpage::uptodate_bitmap. - No page iteration Just one page, no need to loop, this greatly simplified the subpage routine. This patch only implements the bio submit part, no endio support yet. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
Unlike the original try_release_extent_buffer(), try_release_subpage_extent_buffer() will iterate through all the ebs in the page, and try to release each. We can release the full page only after there's no private attached, which means all ebs of that page have been released as well. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
For btrfs_clone_extent_buffer(), it's mostly the same code of __alloc_dummy_extent_buffer(), except it has extra page copy. So to make it subpage compatible, we only need to: - Call set_extent_buffer_uptodate() instead of SetPageUptodate() This will set correct uptodate bit for subpage and regular sector size cases. Since we're calling set_extent_buffer_uptodate() which will also set EXTENT_BUFFER_UPTODATE bit, we don't need to manually set that bit either. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
To support subpage in set_extent_buffer_uptodate and clear_extent_buffer_uptodate we only need to use the subpage-aware helpers to update the page bits. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Qu Wenruo authored
Introduce the following functions to handle subpage error status: - btrfs_subpage_set_error() - btrfs_subpage_clear_error() - btrfs_subpage_test_error() These helpers can only be called when the page has subpage attached and the range is ensured to be inside the page. - btrfs_page_set_error() - btrfs_page_clear_error() - btrfs_page_test_error() These helpers can handle both regular sector size and subpage without problem. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-