See: https://github.com/raspberrypi/linux/pull/2149

Master volume added, which controls both DACs volumes.

See: https://github.com/raspberrypi/linux/pull/2149

[ Upstream commit 9f169b9f

 ]

When multiple front-ends are using the same back-end, putting state of a
front-end to STOP state upon receiving pause command will result in backend
stream getting released by DPCM framework unintentionally. In order to
avoid backend to be released when another active front-end stream is
present, put the stream state to PAUSED state instead of STOP state.

Signed-off-by: Patrick Lai <plai@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bc65a326

 ]

Saved firmware ctx was not never released, so release Firmware
ctx in cleanup routine.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2d1148f0 ]

bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on
Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR
Series Adapter Firmware").

bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in
3f307c3d

 ("bna: Update the Driver and Firmware Version")

bfa was not updated. I presume this was an oversight but it broke support
for bfa+bna cards such as the following
	04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
		1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
	04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
		1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
	04:00.2 Ethernet controller [0200]: Brocade Communications Systems,
		Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
	04:00.3 Ethernet controller [0200]: Brocade Communications Systems,
		Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)

Currently, if the bfa module is loaded first, bna fails to probe the
respective devices with
[  215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[  215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144
[  215.060656] bna 0000:04:00.2: initialization failed err=1
[  215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144
[  215.090644] bna 0000:04:00.3: initialization failed err=1

Whereas if bna is loaded first, bfa fails with
[  249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0
[  249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version
[  249.833513] bfa 0000:04:00.0: bfa init failed
[  249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0
[  249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version
[  250.045449] bfa 0000:04:00.1: bfa init failed
[  250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0

Increase bfa's requested firmware version. Also increase the driver
version.  I only tested that all of the devices probe without error.

Reported-by: Tim Ehlers <tehlers@gwdg.de>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0371adcd ]

If a call to mempool_create_slab_pool() in snic_probe() returns NULL,
return -ENOMEM to indicate failure. mempool_creat_slab_pool() only fails
if it cannot allocate memory.

https://bugzilla.kernel.org/show_bug.cgi?id=189061



Reported-by:  <bianpan2010@ruc.edu.cn>
Signed-off-by: Burak Ok <burak-kernel@bur0k.de>
Signed-off-by: Andreas Schaertl <andreas.schaertl@fau.de>
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9698b6f4

 ]

This fix is to avoid calling fnic_fw_reset_handler through
fnic_host_reset when a finc reset is alreay in progress.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 08f95726

 ]

This headlamp contains a dummy HID descriptor which pretends to be
a mouse-like device, but can't be used as a mouse at all.

Reported-by: Lukas Ocilka <lukas.ocilka@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 60448b07

 ]

Frequency value of zero did not make sense, use same 24.576MHz
setting and only change the clock source in idle mode

Suggested-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 74545f63

 ]

The conversion of Intel PMU drivers into modules did not include reference
counting. The machine will crash when attempting to  access deleted code
if an event from a module PMU is started and the module removed before the
event is destroyed.

i.e. this crashes the machine:

	$ insmod intel-rapl-perf.ko
	$ perf stat -e power/energy-cores/ -C 0 &
	$ rmmod intel-rapl-perf.ko

Set THIS_MODULE to pmu->module in Intel module PMUs so that generic code
can handle reference counting and deny rmmod while an event still exists.

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1482455860-116269-1-git-send-email-davidcc@google.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 159d3726

 ]

The current implementation supports only Intel Merrifield platforms. Don't mess
with the rest of the Intel MID family by not registering device with wrong
properties.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170102092450.87229-1-andriy.shevchenko@linux.intel.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 13a6c832

 ]

Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion
logic allows us to save a few cpu cycles by returning early, skipping the
pending urb in case the stream was stopped; the stop logic handles the urb
and sets the completion callbacks to NULL.

Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e51d5d02

 ]

It is necessary to call entry/exit functions for parent interrupt
controllers for proper masking/unmasking of interrupt lines.

Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 71eae1ca ]

The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25
(bits  0-15 usually used for that are occupied by the packet checksum).
Thus  we need to set the 'shift_rd0'  field in the SH7734 SoC data...

Fixes: f0e81fec

 ("net: sh_eth: Add support SH7734")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4ee437fb

 ]

The fsl_ssi fifo watermark is by default set to 2 free spaces (i.e.
activate DMA on FIFO when only 2 spaces are left.)  This means the
DMA must service the fifo within 2 audio samples, which is just not
enough time  for many use cases with high data rate.  In many
configurations the audio channel slips (causing l/r swap in stereo
configurations, or channel slipping in multi-channel configurations).

This patch gives more breathing room and allows the SSI to operate
reliably by changing the fifio refill watermark to 8.

There is no change in behavior for older chips (with an 8-deep fifo).
Only the newer chips with a 15-deep fifo get the new behavior. I
suspect a new fifo depth setting could be optimized on the older
chips too, but I have not tested.

Signed-off-by: Caleb Crome <caleb@crome.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 63dfb0da

 ]

The USB core may call reset_resume when it fails to resume asix device.
And USB core can recovery this abnormal resume at low level driver,
the same .resume at asix driver can work too. Add .reset_resume can
avoid disconnecting after backing from system resume, and NFS can
still be mounted after this commit.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 14ba9728

 ]

All i.MX6 SoCs have an OCOTP Controller with 4kbit fuses. The i.MX6SL is
an exception and has only 2kbit fuses.

In the TRM for the i.MX6DQ (IMX6QDRM - Rev 2, 06/2014) the fuses size is
described in chapter 46.1.1 with:
"32-bit word restricted program and read to 4Kbits of eFuse OTP(512x8)."

In the TRM for the i.MX6SL (IMX6SLRM - Rev 2, 06/2015) the fuses size is
described in chapter 34.1.1 with:
"32-bit word restricted program and read to 2 kbit of eFuse OTP(128x8)."

Since the Freescale Linux kernel OCOTP driver works with a fuses size of
2 kbit for the i.MX6SL, it looks like the TRM is wrong and the formula
to calculate the correct fuses size has to be 256x8.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6ef4fb38

 ]

Recent changes made KERN_CONT mandatory for continued lines. In the
absence of KERN_CONT, a newline may be implicit inserted by the core
printk code.

In show_pte, we (erroneously) use printk without KERN_CONT for continued
prints, resulting in output being split across a number of lines, and
not matching the intended output, e.g.

[ff000000000000] *pgd=00000009f511b003
, *pud=00000009f4a80003
, *pmd=0000000000000000

Fix this by using pr_cont() for all the continuations.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e19f32da

 ]

Here, pci_iomap can fail, handle this case release selected
pci regions and return -ENOMEM.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4dcd19bf

 ]

Here, If devm_ioremap will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7934c98a

 ]

Markus reported that perf segfaults when reading /sys/kernel/notes from
a kernel linked with GNU gold, due to what looks like a gold bug, so do
some bounds checking to avoid crashing in that case.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 30a9c644 ]

Those are binaries as well, so should be installed by:

  make -C tools/perf install-bin'

too.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-3841b37u05evxrs1igkyu6ks@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4c86d777

 upstream.

On IPv4-mapped IPv6 addresses sk_family is AF_INET6,
but the flow informations are created based on AF_INET.
So the routing set up 'struct flowi4' but we try to
access 'struct flowi6' what leads to an out of bounds
access. Fix this by using the family we get with the
dst_entry, like we do it for the standard policy lookup.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 07485918 ]

Currently, the sched:sched_switch tracepoint reports deadline tasks with
priority -1. But when reading the trace via perf script I've got the
following output:

  # ./d & # (d is a deadline task, see [1])
  # perf record -e sched:sched_switch -a sleep 1
  # perf script
      ...
         swapper     0 [000]  2146.962441: sched:sched_switch: swapper/0:0 [120] R ==> d:2593 [4294967295]
               d  2593 [000]  2146.972472: sched:sched_switch: d:2593 [4294967295] R ==> g:2590 [4294967295]

The task d reports the wrong priority [4294967295]. This happens because
the "int prio" is stored in an unsigned long long val. Although it is
set as a %lld, as int is shorter than unsigned long long,
trace_seq_printf prints it as a positive number.

The fix is just to cast the val as an int, and print it as a %d,
as in the sched:sched_switch tracepoint's "format".

The output with the fix is:

  # ./d &
  # perf record -e sched:sched_switch -a sleep 1
  # perf script
      ...
         swapper     0 [000]  4306.374037: sched:sched_switch: swapper/0:0 [120] R ==> d:10941 [-1]
               d 10941 [000]  4306.383823: sched:sched_switch: d:10941 [-1] R ==> swapper/0:0 [120]

[1] d.c

 ---
  #include <stdio.h>
  #include <unistd.h>
  #include <sys/syscall.h>
  #include <linux/types.h>
  #include <linux/sched.h>

  struct sched_attr {
	__u32 size, sched_policy;
	__u64 sched_flags;
	__s32 sched_nice;
	__u32 sched_priority;
	__u64 sched_runtime, sched_deadline, sched_period;
  };

  int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags)
  {
	return syscall(__NR_sched_setattr, pid, attr, flags);
  }

  int main(void)
  {
	struct sched_attr attr = {
		.size		= sizeof(attr),
		.sched_policy	= SCHED_DEADLINE, /* This creates a 10ms/30ms reservation */
		.sched_runtime	= 10 * 1000 * 1000,
		.sched_period	= attr.sched_deadline = 30 * 1000 * 1000,
	};

	if (sched_setattr(0, &attr, 0) < 0) {
		perror("sched_setattr");
		return -1;
	}

	for(;;);
  }
 ---

Committer notes:

Got the program from the provided URL, http://bristot.me/lkml/d.c

,
trimmed it and included in the cset log above, so that we have
everything needed to test it in one place.

Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/866ef75bcebf670ae91c6a96daa63597ba981f0d.1483443552.git.bristot@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0b47a6bd

 ]

Ensure all reserved fields of xatp are zero before making
hypervisor call to XEN in xen_map_device_mmio().
xenmem_add_to_physmap_one() in XEN fails the mapping request if
extra.res reserved field in xatp is not zero for XENMAPSPACE_dev_mmio
request.

Signed-off-by: Jiandi An <anjiandi@codeaurora.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c2931667

 ]

Currently how btrfs dio deals with split dio write is not good
enough if dio write is split into several segments due to the
lack of contiguous space, a large dio write like 'dd bs=1G count=1'
can end up with incorrect outstanding_extents counter and endio
would complain loudly with an assertion.

This fixes the problem by compensating the outstanding_extents
counter in inode if a large dio write gets split.

Reported-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 096de2f8 ]

When VXLAN offloading is enabled, be_features_check() tries to check if
an encapsulated packet is indeed a VXLAN packet. The check is not strict
enough, and considers any UDP-encapsulated ethernet frame with a 8-byte
tunnel header as being VXLAN. Unfortunately, both GENEVE and VXLAN-GPE
have a 8-byte header, so they get through this check.

Force the UDP destination port to be the one that has been offloaded to
hardware.

Without this, GENEVE-encapsulated packets can end up having an incorrect
checksum when both a GENEVE and a VXLAN (offloaded) tunnel are
configured.

This is similar to commit a547224d

 ("mlx4e: Do not attempt to
offload VXLAN ports that are unrecognized").

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 781feef7

 ]

While checking INODE_REF/INODE_EXTREF for a corner case, we may acquire a
different inode's log_mutex with holding the current inode's log_mutex, and
lockdep has complained this with a possilble deadlock warning.

Fix this by using mutex_lock_nested() when processing the other inode's
log_mutex.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e321f8a8

 ]

If @block_group is not @used_bg, it'll try to get @used_bg's lock without
droping @block_group 's lock and lockdep has throwed a scary deadlock warning
about it.
Fix it by using down_read_nested.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 43aef5c2

 ]

This fixes an error message that was probably copied and pasted. The same
message is used for both the in and out endpoints, so it makes it impossible
to know which one actually failed because both cases say "IN".

Make the out endpoint error message say "OUT".

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c2a6bbaf

 ]

The way acpi_find_child_device() works currently is that, if there
are two (or more) devices with the same _ADR value in the same
namespace scope (which is not specifically allowed by the spec and
the OS behavior in that case is not defined), the first one of them
found to be present (with the help of _STA) will be returned.

This covers the majority of cases, but is not sufficient if some of
the devices in question have a _HID (or _CID) returning some valid
ACPI/PNP device IDs (which is disallowed by the spec) and the
ASL writers' expectation appears to be that the OS will match
devices without a valid ACPI/PNP device ID against a given bus
address first.

To cover this special case as well, modify find_child_checks()
to prefer devices without ACPI/PNP device IDs over devices that
have them.

Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3ef01c96

 ]

NF_CT_PROTO_DCCP/SCTP/UDPLITE were switched from tristate to boolean so
defconfig needs to be adjusted to silence warnings:
	warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP
	warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
	warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1f2ed153

 ]

Since 'perf probe' supports cross-arch probes, it is possible to analyze
different arch kernel image which has different bits-per-long.

In that case, it fails to get the module name because it uses the
MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead
of the target arch bits-per-long.

This fixes above issue by changing modname-offset based on the target
archs bit width. This is ok because linux kernel uses LP64 model on
64bit arch.

E.g. without this (on x86_64, and target module is arm32):

  $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
  p:probe/configfs_lookup :configfs_lookup+0
                          ^-Here is an empty module name.

With this fix, you can see correct module name:

  $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
  p:probe/configfs_lookup configfs:configfs_lookup+0

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devbox


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c415f9e8

 ]

The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core
which fixes some silicon bugs that needed software workarounds
in Version 1.0 that was used on Zynq systems.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4ea2a6be

 ]

The patch removes these warnings reported by dtc 1.4:
Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 12a7f17f

 ]

Now races can happen between interrupt handler execution and PM runtime in
error handling code path in probe and in dwc3_omap_remove() which will lead
to system crash:

in probe:
...
 err1:
	pm_runtime_put_sync(dev);
^^ PM runtime can race with IRQ handler when deferred probing happening
   due to extcon
	pm_runtime_disable(dev);

	return ret;

in dwc3_omap_remove:
...
	dwc3_omap_disable_irqs(omap);
^^ IRQs are disabled in HW, but handler may still run
	of_platform_depopulate(omap->dev);
	pm_runtime_put_sync(&pdev->dev);
^^ PM runtime can race with IRQ handler
	pm_runtime_disable(&pdev->dev);

	return 0;

So, OMAP DWC3 IRQ need to be disabled before calling
pm_runtime_put() in probe and in dwc3_omap_remove().

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 75bdc7f3

 ]

Add some missing 'of_node_put()' in early exit error path.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 97b84fd6

 ]

An L2TP socket bound to the unspecified address should match with any
address. If not, it can't receive any packet and __l2tp_ip6_bind_lookup()
can't prevent another socket from binding on the same device/tunnel ID.

While there, rename the 'addr' variable to 'sk_laddr' (local addr), to
make following patch clearer.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>