The .set_jack_detect() codec component callback is invoked during card
registration, which happens when the machine driver is probed.

The issue is that this callback can race with the bus suspend/resume,
and IO timeouts can happen. This can be reproduced very easily if the
machine driver is 'blacklisted' and manually probed after the bus
suspends. The bus and codec need to be re-initialized using pm_runtime
helpers.

Previous contributions tried to make sure accesses to the bus during
the .set_jack_detect() component callback only happen when the bus is
active. This was done by changing the regcache status on a component
remove. This is however a layering violation, the regcache status
should only be modified on device probe, suspend and resume. The
component probe/remove should not modify how the device regcache is
handled. This solution also didn't handle all the possible race
conditions, and the RT700 headset codec was not handled.

This patch tries to resume the codec device before handling the jack
initializations. In case the codec has not yet been initialized,
pm_runtime may not be enabled yet, so we don't squelch the -EACCES
error code and only stop the jack information. When the codec reports
as attached, the jack initialization will proceed as usual.

BugLink: https://github.com/thesofproject/linux/issues/3643
Fixes: 7ad4d237 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Fixes: 899b1254

 ('ASoC: rt711: add snd_soc_component remove callback')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

The workqueues are initialized in the io_init functions, which isn't
quite right. In some tests, this leads to warnings throw from
__queue_delayed_work()

WARN_ON_FUNCTION_MISMATCH(timer->function, delayed_work_timer_fn);

Move all the initializations to the probe functions.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Realtek headset codec drivers typically check if the card is
instantiated before proceeding with the jack detection.

The rt700, rt711 and rt711-sdca are however missing a check on the
card pointer, which can lead to NULL dereferences encountered in
driver bind/unbind tests.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Follow the same flow as rt711-sdca and initialize all mutexes at probe
time.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

If the card registration fails, typically because of deferred probes,
the device properties added for headset codecs are not removed, which
leads to kernel oopses in driver bind/unbind tests.

We already clean-up the device properties when the card is removed,
this code can be moved as a helper and called upon card registration
errors.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

In codec driver bind/unbind test, the following warning is thrown:

DEBUG_LOCKS_WARN_ON(lock->magic != lock)
...
[  699.182495]  rt711_sdca_jack_init+0x1b/0x1d0 [snd_soc_rt711_sdca]
[  699.182498]  rt711_sdca_set_jack_detect+0x3b/0x90 [snd_soc_rt711_sdca]
[  699.182500]  snd_soc_component_set_jack+0x24/0x50 [snd_soc_core]

A quick check in the code shows that the 'calibrate_mutex' used by
this driver are not initialized at probe time. Moving the
initialization to the probe removes the issue.

BugLink: https://github.com/thesofproject/linux/issues/3644
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

When binding/unbinding codec drivers, the following warnings are
thrown:

[ 107.266879] rt715-sdca sdw:3:025d:0714:01: Unbalanced pm_runtime_enable!
[  306.879700] rt711-sdca sdw:0:025d:0711:01: Unbalanced pm_runtime_enable!

Add a remove callback for all Realtek/Maxim SoundWire codecs and remove this
warning.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220606203752.144159-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

We currently report that range controls accept a range of 0..(max-min) but
accept writes in the range 0..(max-min+1). Remove that extra +1.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220604105246.4055214-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Linux 5.19-rc1

Currently wm_adsp_fw_put() returns 0 rather than 1 when updating the value
of the control, meaning that no event is generated to userspace. Fix this
by setting the default return value to 1, the code already exits early with
a return value of 0 if the value is unchanged.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220603115003.3865834-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently the put() method for the deemphasis control returns 0 when a new
value is written to the control even if the value changed, meaning events
are not generated. Fix this, skip the work of updating the value when it is
unchanged and then return 1 after having done so.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603123937.4013603-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

If the audio CODEC is playing sound when the system is suspended,
it can be left in a state which throws the following error:

wm8962 3-001a: ASoC: error at soc_component_read_no_lock on wm8962.3-001a: -16

Once this error has occurred, the audio will not work again until rebooted.

Fix this by configuring SET_SYSTEM_SLEEP_PM_OPS.

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220526182129.538472-1-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

This if statement is reversed.  In fact, the condition can just be
deleted because writing zero bytes is a no-op.

Fixes: 066c6762

 ("ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/Yph+T3PpGCdPsEDj@kili
Signed-off-by: Mark Brown <broonie@kernel.org>

This code is supposed to propagate errors from simple_write_to_buffer()
or return -EFAULT if "size != count".  However "size" needs to be signed
for the code to work correctly and the case where "size == 0" is not
handled correctly.

Fixes: 066c6762 ("ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages")
Fixes: 2f0b1b01

 ("ASoC: SOF: debug: Add support for IPC message injection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/Yph+Cd+JrfOH0i7z@kili
Signed-off-by: Mark Brown <broonie@kernel.org>

The SAI module on i.MX8MN is almost same as i.MX8MP,
So reuse same soc data as i.MX8MP.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1653966123-28217-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Cleanup path for sof_prepare_widgets_in_path() should check if unprepare
callback exists before calling it, instead it checks if it does not
exist. Fix the check.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220602135757.3335351-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull file descriptor fix from Al Viro:
 "Fix for breakage in #work.fd this window"

* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix the breakage in close_fd_get_file() calling conventions change

Pull mm hotfixes from Andrew Morton:
 "Fixups for various recently-added and longer-term issues and a few
  minor tweaks:

   - fixes for material merged during this merge window

   - cc:stable fixes for more longstanding issues

   - minor mailmap and MAINTAINERS updates"

* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
  x86/kexec: fix memory leak of elf header buffer
  mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
  mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
  mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
  MAINTAINERS: add maintainer information for z3fold
  mailmap: update Josh Poimboeuf's email

Pull delay-accounting update from Andrew Morton:
 "A single featurette for delay accounting.

  Delayed a bit because, unusually, it had dependencies on both the
  mm-stable and mm-nonmm-stable queues"

* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  delayacct: track delays from write-protect copy

The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.

It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32.  It shoudln't have been a bitmap in the first
place.  The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.

The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.

So just use a regular integer.

In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).

That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953f ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.

Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2

@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table.  New variant doesn't, and callers need to be adjusted.

Reported-and-tested-by:  <syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com>
Fixes: 6319194e

 ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull x86 SGX fix from Thomas Gleixner:
 "A single fix for x86/SGX to prevent that memory which is allocated for
  an SGX enclave is accounted to the wrong memory control group"

* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Set active memcg prior to shmem allocation

Pull x86 mm cleanup from Thomas Gleixner:
 "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"

* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)

Pull x86 microcode updates from Thomas Gleixner:

 - Disable late microcode loading by default. Unless the HW people get
   their act together and provide a required minimum version in the
   microcode header for making a halfways informed decision its just
   lottery and broken.

 - Warn and taint the kernel when microcode is loaded late

 - Remove the old unused microcode loader interface

 - Remove a redundant perf callback from the microcode loader

* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Remove unnecessary perf callback
  x86/microcode: Taint and warn on late loading
  x86/microcode: Default-disable late loading
  x86/microcode: Rip out the OLD_INTERFACE

Pull x86 cleanups from Thomas Gleixner:
 "A set of small x86 cleanups:

   - Remove unused headers in the IDT code

   - Kconfig indendation and comment fixes

   - Fix all 'the the' typos in one go instead of waiting for bots to
     fix one at a time"

* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix all occurences of the "the the" typo
  x86/idt: Remove unused headers
  x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
  x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig

Pull x86 boot update from Thomas Gleixner:
 "Use strlcpy() instead of strscpy() in arch_setup()"

* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/setup: Use strscpy() to replace deprecated strlcpy()

Pull clockevent/clocksource updates from Thomas Gleixner:

 - Device tree bindings for MT8186

 - Tell the kernel that the RISC-V SBI timer stops in deeper power
   states

 - Make device tree parsing in sp804 more robust

 - Dead code removal and tiny fixes here and there

 - Add the missing SPDX identifiers

* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
  clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
  clocksource/drivers/timer-sun5i: Convert to SPDX identifier
  clocksource/drivers/timer-sun4i: Convert to SPDX identifier
  clocksource/drivers/pistachio: Convert to SPDX identifier
  clocksource/drivers/orion: Convert to SPDX identifier
  clocksource/drivers/lpc32xx: Convert to SPDX identifier
  clocksource/drivers/digicolor: Convert to SPDX identifier
  clocksource/drivers/armada-370-xp: Convert to SPDX identifier
  clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
  clocksource/drivers/jcore: Convert to SPDX identifier
  clocksource/drivers/bcm_kona: Convert to SPDX identifier
  clocksource/drivers/sp804: Avoid error on multiple instances
  clocksource/drivers/riscv: Events are stopped during CPU suspend
  clocksource/drivers/ixp4xx: Drop boardfile probe path
  dt-bindings: timer: Add compatible for Mediatek MT8186

Pull scheduler fix from Thomas Gleixner:
 "Fix the fallout of sysctl code move which placed the init function
  wrong"

* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/autogroup: Fix sysctl move

Pull perf fixes from Thomas Gleixner:

  - Make the ICL event constraints match reality

  - Remove a unused local variable

* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Remove unused local variable
  perf/x86/intel: Fix event constraints for ICL

Pull perf fixlet from Thomas Gleixner:
 "Trivial indentation fix in Kconfig"

* tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/Kconfig: Fix indentation in the Kconfig file

Pull objtool fixes from Thomas Gleixner:

 - Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
   noreturn

 - Allow architectures to select uaccess validation

 - Use the non-instrumented bit test for test_cpu_has() to prevent
   escape from non-instrumentable regions

 - Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
   from non-instrumentable regions

 - Mark a few tiny inline as __always_inline to prevent GCC from
   bringing them out of line and instrumenting them

 - Mark the empty stub context_tracking_enabled() as always inline as
   GCC brings them out of line and instruments the empty shell

 - Annotate ex_handler_msr_mce() as dead end

* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/extable: Annotate ex_handler_msr_mce() as a dead end
  context_tracking: Always inline empty stubs
  x86: Always inline on_thread_stack() and current_top_of_stack()
  jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
  x86/cpu: Elide KCSAN for cpu_has() and friends
  objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
  objtool: Add CONFIG_HAVE_UACCESS_VALIDATION

Pull more SCSI updates from James Bottomley:
 "Mostly small bug fixes plus other trivial updates.

  The major change of note is moving ufs out of scsi and a minor update
  to lpfc vmid handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
  scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
  scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
  scsi: mpi3mr: Fix kernel-doc
  scsi: lpfc: Add support for ATTO Fibre Channel devices
  scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
  scsi: sd_zbc: Prevent zone information memory leak
  scsi: sd: Fix potential NULL pointer dereference
  scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
  scsi: myrb: Fix up null pointer access on myrb_cleanup()
  scsi: core: Unexport scsi_bus_type
  scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
  scsi: ufs: ufshcd: Delete unnecessary NULL check
  scsi: isci: Fix typo in comment
  scsi: pmcraid: Fix typo in comment
  scsi: smartpqi: Fix typo in comment
  scsi: qedf: Fix typo in comment
  scsi: esas2r: Fix typo in comment
  scsi: storvsc: Fix typo in comment
  scsi: ufs: Split the drivers/scsi/ufs directory
  scsi: qla1280: Remove redundant variable
  ...

Pull hardware timestamping subsystem from Thierry Reding:
 "This contains the new HTE (hardware timestamping engine) subsystem
  that has been in the works for a couple of months now.

  The infrastructure provided allows for drivers to register as hardware
  timestamp providers, while consumers will be able to request events
  that they are interested in (such as GPIOs and IRQs) to be timestamped
  by the hardware providers.

  Note that this currently supports only one provider, but there seems
  to be enough interest in this functionality and we expect to see more
  drivers added once this is merged"

[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
  platforms as another future timestamp provider ]

* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: timestamp: Correct id path
  dt-bindings: Renamed hte directory to timestamp
  hte: Uninitialized variable in hte_ts_get()
  hte: Fix off by one in hte_push_ts_ns()
  hte: Fix possible use-after-free in tegra_hte_test_remove()
  hte: Remove unused including <linux/version.h>
  MAINTAINERS: Add HTE Subsystem
  hte: Add Tegra HTE test driver
  tools: gpio: Add new hardware clock type
  gpiolib: cdev: Add hardware timestamp clock type
  gpio: tegra186: Add HTE support
  gpiolib: Add HTE support
  dt-bindings: Add HTE bindings
  hte: Add Tegra194 HTE kernel provider
  drivers: Add hardware timestamp engine (HTE) subsystem
  Documentation: Add HTE subsystem guide

Pull more Kbuild updates from Masahiro Yamada:

 - Fix build regressions for parisc, csky, nios2, openrisc

 - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT

 - Remove arch/parisc/nm, which was presumably a workaround for old
   tools

 - Check the odd combination of EXPORT_SYMBOL and 'static' precisely

 - Make external module builds robust against "too long argument error"

 - Support j, k keys for moving the cursor in nconfig

* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  kbuild: Allow to select bash in a modified environment
  scripts: kconfig: nconf: make nconfig accept jk keybindings
  modpost: use fnmatch() to simplify match()
  modpost: simplify mod->name allocation
  kbuild: factor out the common objtool arguments
  kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
  kbuild: clean .tmp_* pattern by make clean
  kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
  kbuild: rebuild multi-object modules when objtool is updated
  kbuild: add cmd_and_savecmd macro
  kbuild: make *.mod rule robust against too long argument error
  kbuild: make built-in.a rule robust against too long argument error
  kbuild: check static EXPORT_SYMBOL* by script instead of modpost
  parisc: remove arch/parisc/nm
  kbuild: do not create *.prelink.o for Clang LTO or IBT
  kbuild: replace $(linked-object) with CONFIG options
  kbuild: do not try to parse *.cmd files for objects provided by compiler
  kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
  modpost: squash if...else-if in find_elf_symbol2()
  modpost: reuse ARRAY_SIZE() macro for section_mismatch()
  ...

Pull vfs pathname updates from Al Viro:
 "Several cleanups in fs/namei.c"

* tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  namei: cleanup double word in comment
  get rid of dead code in legitimize_root()
  fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()

Pull mount handling updates from Al Viro:
 "Cleanups (and one fix) around struct mount handling.

  The fix is usermode_driver.c one - once you've done kern_mount(), you
  must kern_unmount(); simple mntput() will end up with a leak. Several
  failure exits in there messed up that way... In practice you won't hit
  those particular failure exits without fault injection, though"

* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  move mount-related externs from fs.h to mount.h
  blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
  m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
  linux/mount.h: trim includes
  uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)

Pull file descriptor updates from Al Viro.

 - Descriptor handling cleanups

* tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Unify the primitives for file descriptor closing
  fs: remove fget_many and fput_many interface
  io_uring_enter(): don't leave f.flags uninitialized

Pull cifs client fixes from Steve French:
 "Nine cifs/smb3 client fixes.

  Includes DFS fixes, some cleanup of leagcy SMB1 code, duplicated
  message cleanup and a double free and deadlock fix"

* tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix uninitialized pointer in error case in dfs_cache_get_tgt_share
  cifs: skip trailing separators of prefix paths
  cifs: update internal module number
  cifs: version operations for smb20 unneeded when legacy support disabled
  cifs: do not build smb1ops if legacy support is disabled
  cifs: fix potential deadlock in direct reclaim
  cifs: when extending a file with falloc we should make files not-sparse
  cifs: remove repeated debug message on cifs_put_smb_ses()
  cifs: fix potential double free during failed mount

This fixes the build error when the system has a default bash version
which is too old to support associative array variables.

The build error log as fellowing:
linux/scripts/check-local-export: line 11: declare: -A: invalid option
declare: usage: declare [-afFirtx] [-p] [name[=value] ...]

Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>