- Jan 14, 2023
-
-
Kyle Huey authored
commit 4a804c4f upstream Handle PKRU in copy_uabi_to_xstate() for the benefit of APIs that write the XSTATE such as PTRACE_SETREGSET with NT_X86_XSTATE. This restores the pre-5.14 behavior of ptrace. The regression can be seen by running gdb and executing `p $pkru`, `set $pkru = 42`, and `p $pkru`. On affected kernels (5.14+) the write to the PKRU register (which gdb performs through ptrace) is ignored. Fixes: e84ba47e ("x86/fpu: Hook up PKRU into ptrace()") Signed-off-by:
Kyle Huey <me@kylehuey.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20221115230932.7126-5-khuey%40kylehuey.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kyle Huey authored
commit 2c87767c upstream In preparation for adding PKRU handling code into copy_uabi_to_xstate(), add an argument that copy_uabi_from_kernel_to_xstate() can use to pass the canonical location of the PKRU value. For copy_sigframe_from_user_to_xstate() the kernel will actually restore the PKRU value from the fpstate, but pass in the thread_struct's pkru location anyways for consistency. Signed-off-by:
Kyle Huey <me@kylehuey.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20221115230932.7126-4-khuey%40kylehuey.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kyle Huey authored
commit 1c813ce0 upstream ptrace (through PTRACE_SETREGSET with NT_X86_XSTATE) ultimately calls copy_uabi_from_kernel_to_xstate(). In preparation for eventually handling PKRU in copy_uabi_to_xstate, pass in a pointer to the PKRU location. Signed-off-by:
Kyle Huey <me@kylehuey.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20221115230932.7126-3-khuey%40kylehuey.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kyle Huey authored
commit 6a877d24 upstream This will allow copy_sigframe_from_user_to_xstate() to grab the address of thread_struct's pkru value in a later patch. Signed-off-by:
Kyle Huey <me@kylehuey.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20221115230932.7126-2-khuey%40kylehuey.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 71bdea6f upstream. Adjust some MADV_XXX constants to be in sync what their values are on all other platforms. There is currently no reason to have an own numbering on parisc, but it requires workarounds in many userspace sources (e.g. glibc, qemu, ...) - which are often forgotten and thus introduce bugs and different behaviour on parisc. A wrapper avoids an ABI breakage for existing userspace applications by translating any old values to the new ones, so this change allows us to move over all programs to the new ABI over time. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Jan 12, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230110180031.620810905@linuxfoundation.org Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Bagas Sanjaya <bagasdotme@gmail.com> Tested-by:
Allen Pais <apais@linux.microsoft.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Kelsey Steele <kelseysteele@linux.microsoft.com> Tested-by:
Ron Economos <re@w6rz.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jocelyn Falempe authored
commit b389286d upstream. For G200_SE_A, PLL M setting is wrong, which leads to blank screen, or "signal out of range" on VGA display. previous code had "m |= 0x80" which was changed to m |= ((pixpllcn & BIT(8)) >> 1); Tested on G200_SE_A rev 42 This line of code was moved to another file with commit 877507bb ("drm/mgag200: Provide per-device callbacks for PIXPLLC") but can be easily backported before this commit. v2: * put BIT(7) First to respect MSB-to-LSB (Thomas) * Add a comment to explain that this bit must be set (Thomas) Fixes: 2dd04094 ("drm/mgag200: Store values (not bits) in struct mgag200_pll_values") Cc: stable@vger.kernel.org Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221013132810.521945-1-jfalempe@redhat.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harshit Mogalapalli authored
Smatch warning: io_fixup_rw_res() warn: unsigned 'res' is never less than zero. Change type of 'res' from unsigned to long. Fixes: d6b7efc7 ("io_uring/rw: fix error'ed retry return values") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ard Biesheuvel authored
commit 196dff27 upstream. Instead of blindly creating the EFI random seed configuration table if the RNG protocol is implemented and works, check whether such a EFI configuration table was provided by an earlier boot stage and if so, concatenate the existing and the new seeds, leaving it up to the core code to mix it in and credit it the way it sees fit. This can be used for, e.g., systemd-boot, to pass an additional seed to Linux in a way that can be consumed by the kernel very early. In that case, the following definitions should be used to pass the seed to the EFI stub: struct linux_efi_random_seed { u32 size; // of the 'seed' array in bytes u8 seed[]; }; The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY pool memory, and the address of the struct in memory should be installed as a EFI configuration table using the following GUID: LINUX_EFI_RANDOM_SEED_TABLE_GUID 1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b Note that doing so is safe even on kernels that were built without this patch applied, but the seed will simply be overwritten with a seed derived from the EFI RNG protocol, if available. The recommended seed size is 32 bytes, and seeds larger than 512 bytes are considered corrupted and ignored entirely. In order to preserve forward secrecy, seeds from previous bootloaders are memzero'd out, and in order to preserve memory, those older seeds are also freed from memory. Freeing from memory without first memzeroing is not safe to do, as it's possible that nothing else will ever overwrite those pages used by EFI. Reviewed-by:
Jason A. Donenfeld <Jason@zx2c4.com> [ardb: incorporate Jason's followup changes to extend the maximum seed size on the consumer end, memzero() it and drop a needless printk] Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 5fc4cbd9 upstream. Commit 307af6c8 ("mbcache: automatically delete entries from cache on freeing") started nesting cache->c_list_lock under the bit locks protecting hash buckets of the mbcache hash table in mb_cache_entry_create(). This causes problems for real-time kernels because there spinlocks are sleeping locks while bitlocks stay atomic. Luckily the nesting is easy to avoid by holding entry reference until the entry is added to the LRU list. This makes sure we cannot race with entry deletion. Cc: stable@kernel.org Fixes: 307af6c8 ("mbcache: automatically delete entries from cache on freeing") Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220908091032.10513-1-jack@suse.cz Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jie Wang authored
commit 29df7c69 upstream. The refactoring of rx copybreak modifies the original return logic, which will make this feature unavailable. So this patch fixes the return logic of rx copybreak. Fixes: e74a726d ("net: hns3: refactor hns3_nic_reuse_page()") Fixes: 99f6b5fb ("net: hns3: use bounce buffer when rx page can not be reused") Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
Hao Lan <lanhao@huawei.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
commit 3d17adea upstream. Previous commit a05d3c91 ("btrfs: check superblock to ensure the fs was not modified at thaw time") only checks the content of the super block, but it doesn't really check if the on-disk super block has a matching checksum. This patch will add the checksum verification to thaw time superblock verification. This involves the following extra changes: - Export btrfs_check_super_csum() As we need to call it in super.c. - Change the argument list of btrfs_check_super_csum() Instead of passing a char *, directly pass struct btrfs_super_block * pointer. - Verify that our checksum type didn't change before checking the checksum value, like it's done at mount time Fixes: a05d3c91 ("btrfs: check superblock to ensure the fs was not modified at thaw time") Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Muhammad Usama Anjum authored
commit 5ad51ab6 upstream. The build of kselftests fails if relative path is specified through KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine the path of the output objects. When make is run from other directories with relative paths, the exact path of the build objects is ambiguous and build fails. make[1]: Entering directory '/home/usama/repos/kernel/linux_mainline2/tools/testing/selftests/alsa' gcc mixer-test.c -L/usr/lib/x86_64-linux-gnu -lasound -o build/kselftest/alsa/mixer-test /usr/bin/ld: cannot open output file build/kselftest/alsa/mixer-test Set the BUILD variable to the absolute path of the output directory. Make the logic readable and easy to follow. Use spaces instead of tabs for indentation as if with tab indentation is considered recipe in make. Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Tyler Hicks (Microsoft) <code@tyhicks.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit 105c78e1 upstream. Mounting a filesystem whose journal inode has the encrypt flag causes a NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt' mount option is used. The problem is that when jbd2_journal_init_inode() calls bmap(), it eventually finds its way into ext4_iomap_begin(), which calls fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if the inode is encrypted, then its encryption key must already be set up. That's not the case here, since the journal inode is never "opened" like a normal file would be. Hence the crash. A reproducer is: mkfs.ext4 -F /dev/vdb debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808" mount /dev/vdb /mnt -o inlinecrypt To fix this, make ext4 consider journal inodes with the encrypt flag to be invalid. (Note, maybe other flags should be rejected on the journal inode too. For now, this is just the minimal fix for the above issue.) I've marked this as fixing the commit that introduced the call to fscrypt_limit_io_blocks(), since that's what made an actual crash start being possible. But this fix could be applied to any version of ext4 that supports the encrypt feature. Reported-by:
<syzbot+ba9dac45bc76c490b7c3@syzkaller.appspotmail.com> Fixes: 38ea50da ("ext4: support direct I/O with fscrypt using blk-crypto") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221102053312.189962-1-ebiggers@kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthieu Baerts authored
commit d3295fee upstream. Before, only the destructor from TCP request sock in IPv4 was called even if the subflow was IPv6. It is important to use the right destructor to avoid memory leaks with some advanced IPv6 features, e.g. when the request socks contain specific IPv6 options. Fixes: 79c0949e ("mptcp: Add key generation and token tree") Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthieu Baerts authored
commit 34b21d1d upstream. tcp_request_sock_ops structure is specific to IPv4. It should then not be used with MPTCP subflows on top of IPv6. For example, it contains the 'family' field, initialised to AF_INET. This 'family' field is used by TCP FastOpen code to generate the cookie but also by TCP Metrics, SELinux and SYN Cookies. Using the wrong family will not lead to crashes but displaying/using/checking wrong things. Note that 'send_reset' callback from request_sock_ops structure is used in some error paths. It is then also important to use the correct one for IPv4 or IPv6. The slab name can also be different in IPv4 and IPv6, it will be used when printing some log messages. The slab pointer will anyway be the same because the object size is the same for both v4 and v6. A BUILD_BUG_ON() has also been added to make sure this size is the same. Fixes: cec37a6e ("mptcp: Handle MP_CAPABLE options for outgoing connections") Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Limonciello authored
A number of AMD based Rembrandt laptops are not working properly in suspend/resume. This has been root caused to be from the BIOS implementation not populating code for the AMD GUID in uPEP, but instead only the Microsoft one. In later kernels this has been fixed by using the Microsoft GUID instead. The following series of patches has fixed it in newer kernels: commit ed470feb ("ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008") commit 1a2dcab5 ("ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset") commit 100a5737 ("ACPI: x86: s2idle: Move _HID handling for AMD systems into structures") commit fd894f05 ("ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt") commit a0bc0023 ("ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID") commit d0f61e89 ("ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE") commit ddeea2c3 ("ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14") commit 888ca9c7 ("ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7") commit 631b5451 ("ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13") commit 39f81776 ("ACPI: x86: s2idle: Fix a NULL pointer dereference") commit 54bd1e54 ("ACPI: x86: s2idle: Add another ID to s2idle_dmi_table") commit 577821f7 ("ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865") commit e6d180a3 ("ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+") This is needlessly complex for 5.15.y though. To accomplish the same effective result revert commit f0c62255 ("ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007") instead. Link: https://lore.kernel.org/stable/MN0PR12MB61015DB3D6EDBFD841157918E2F59@MN0PR12MB6101.namprd12.prod.outlook.com/ Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
William Liu authored
commit 797805d8 upstream. "nt_len - CIFS_ENCPWD_SIZE" is passed directly from ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative number (or large unsigned value) used for a subsequent memcpy in ksmbd_auth_ntlvm2 and can cause a panic. Fixes: e2f34481 ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by:
William Liu <will@willsroot.io> Signed-off-by:
Hrvoje Mišetić <misetichrvoje@gmail.com> Acked-by:
Namjae Jeon <linkinjeon@kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Namjae Jeon authored
commit 83dcedd5 upstream. If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round again, It will cause infinite loop issue. And all threads from next connections would be doing that. This patch add max retry count(2) to avoid it. kernel_recvmsg() will wait during 7sec timeout and try to retry two time if -EAGAIN is returned. And add flags of kvmalloc to __GFP_NOWARN and __GFP_NORETRY to disconnect immediately without retrying on memory alloation failure. Fixes: 0626e664 ("cifsd: add server handler for central processing and tranport layers") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259 Reviewed-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by:
Namjae Jeon <linkinjeon@kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit cb7a95af upstream. Commit 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") fixed a build warning by turning a comment into a WARN_ON(), but it turns out that syzbot then complains because it can trigger said warning with a corrupted hfs image. The warning actually does warn about a bad situation, but we are much better off just handling it as the error it is. So rather than warn about us doing bad things, stop doing the bad things and return -EIO. While at it, also fix a memory leak that was introduced by an earlier fix for a similar syzbot warning situation, and add a check for one case that historically wasn't handled at all (ie neither comment nor subsequent WARN_ON). Reported-by:
<syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com> Fixes: 55d1cbbb ("hfs/hfsplus: use WARN_ON for sanity check") Fixes: 8d824e69 ("hfs: fix OOB Read in __hfs_brec_find") Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/ Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 55d1cbbb upstream. gcc warns about a couple of instances in which a sanity check exists but the author wasn't sure how to react to it failing, which makes it look like a possible bug: fs/hfsplus/inode.c: In function 'hfsplus_cat_read_inode': fs/hfsplus/inode.c:503:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 503 | /* panic? */; | ^ fs/hfsplus/inode.c:524:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 524 | /* panic? */; | ^ fs/hfsplus/inode.c: In function 'hfsplus_cat_write_inode': fs/hfsplus/inode.c:582:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 582 | /* panic? */; | ^ fs/hfsplus/inode.c:608:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 608 | /* panic? */; | ^ fs/hfs/inode.c: In function 'hfs_write_inode': fs/hfs/inode.c:464:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 464 | /* panic? */; | ^ fs/hfs/inode.c:485:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 485 | /* panic? */; | ^ panic() is probably not the correct choice here, but a WARN_ON seems appropriate and avoids the compile-time warning. Link: https://lkml.kernel.org/r/20210927102149.1809384-1-arnd@kernel.org Link: https://lore.kernel.org/all/20210322223249.2632268-1-arnd@kernel.org/ Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhenyu Wang authored
commit 704f3384 upstream. Check carefully on root debugfs available when destroying vgpu, e.g in remove case drm minor's debugfs root might already be destroyed, which led to kernel oops like below. Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14 BUG: kernel NULL pointer dereference, address: 0000000000000150 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6 Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022 RIP: 0010:__lock_acquire+0x5e2/0x1f90 Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0 RSP: 0018:ffff9f770274f948 EFLAGS: 00010046 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire+0xbf/0x2b0 ? simple_recursive_removal+0xa5/0x2b0 ? lock_release+0x13d/0x2d0 down_write+0x2a/0xd0 ? simple_recursive_removal+0xa5/0x2b0 simple_recursive_removal+0xa5/0x2b0 ? start_creating.part.0+0x110/0x110 ? _raw_spin_unlock+0x29/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt] intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt] intel_vgpu_release_dev+0xe/0x20 [kvmgt] device_release+0x30/0x80 kobject_put+0x79/0x1b0 device_release_driver_internal+0x1b8/0x230 bus_remove_device+0xec/0x160 device_del+0x189/0x400 ? up_write+0x9c/0x1b0 ? mdev_device_remove_common+0x60/0x60 [mdev] mdev_device_remove_common+0x22/0x60 [mdev] mdev_device_remove_cb+0x17/0x20 [mdev] device_for_each_child+0x56/0x80 mdev_unregister_parent+0x5a/0x81 [mdev] intel_gvt_clean_device+0x2d/0xe0 [kvmgt] intel_gvt_driver_remove+0x2e/0xb0 [i915] i915_driver_remove+0xac/0x100 [i915] i915_pci_remove+0x1a/0x30 [i915] pci_device_remove+0x31/0xa0 device_release_driver_internal+0x1b8/0x230 unbind_store+0xd8/0x100 kernfs_fop_write_iter+0x156/0x210 vfs_write+0x236/0x4a0 ksys_write+0x61/0xd0 do_syscall_64+0x55/0x80 ? find_held_lock+0x2b/0x80 ? lock_release+0x13d/0x2d0 ? up_read+0x17/0x20 ? lock_is_held_type+0xe3/0x140 ? asm_exc_page_fault+0x22/0x30 ? lockdep_hardirqs_on+0x7d/0x100 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fc9b2c9e0c4 Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4 RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001 RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30 R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00 </TASK> Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm_multipath kvmgt mdev vfio_iommu_type1 vfio kvm irqbypass i915 nvme e1000e igb nvme_core crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic serio_raw ghash_clmulni_intel sha512_ssse3 dca drm_buddy intel_gtt video wmi drm_display_helper ttm CR2: 0000000000000150 ---[ end trace 0000000000000000 ]--- Cc: Wang Zhi <zhi.a.wang@intel.com> Cc: He Yu <yu.he@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Zhi Wang <zhi.a.wang@intel.com> Tested-by:
Yu He <yu.he@intel.com> Fixes: bc7b0be3 ("drm/i915/gvt: Add basic debugfs infrastructure") Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20221219140357.769557-2-zhenyuw@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhenyu Wang authored
commit c4b850d1 upstream. When gvt debug fs is destroyed, need to have a sane check if drm minor's debugfs root is still available or not, otherwise in case like device remove through unbinding, drm minor's debugfs directory has already been removed, then intel_gvt_debugfs_clean() would act upon dangling pointer like below oops. i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1926_rid_0x0a.golden_hw_state failed with error -2 i915 0000:00:02.0: MDEV: Registered Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 2 PID: 2486 Comm: gfx-unbind.sh Tainted: G I 6.1.0-rc8+ #15 Hardware name: Dell Inc. XPS 13 9350/0JXC1H, BIOS 1.13.0 02/10/2020 RIP: 0010:down_write+0x1f/0x90 Code: 1d ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 48 89 fb e8 62 c0 ff ff bf 01 00 00 00 e8 28 5e 31 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 33 65 48 8b 04 25 c0 bd 01 00 48 89 43 08 bf 01 RSP: 0018:ffff9eb3036ffcc8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000000a0 RCX: ffffff8100000000 RDX: 0000000000000001 RSI: 0000000000000064 RDI: ffffffffa48787a8 RBP: ffff9eb3036ffd30 R08: ffffeb1fc45a0608 R09: ffffeb1fc45a05c0 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffff91acc33fa328 R14: ffff91acc033f080 R15: ffff91acced533e0 FS: 00007f6947bba740(0000) GS:ffff91ae36d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 00000001133a2002 CR4: 00000000003706e0 Call Trace: <TASK> simple_recursive_removal+0x9f/0x2a0 ? start_creating.part.0+0x120/0x120 ? _raw_spin_lock+0x13/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_clean+0x15/0x30 [kvmgt] intel_gvt_clean_device+0x49/0xe0 [kvmgt] intel_gvt_driver_remove+0x2f/0xb0 i915_driver_remove+0xa4/0xf0 i915_pci_remove+0x1a/0x30 pci_device_remove+0x33/0xa0 device_release_driver_internal+0x1b2/0x230 unbind_store+0xe0/0x110 kernfs_fop_write_iter+0x11b/0x1f0 vfs_write+0x203/0x3d0 ksys_write+0x63/0xe0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f6947cb5190 Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 RSP: 002b:00007ffcbac45a28 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f6947cb5190 RDX: 000000000000000d RSI: 0000555e35c866a0 RDI: 0000000000000001 RBP: 0000555e35c866a0 R08: 0000000000000002 R09: 0000555e358cb97c R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000001 R13: 000000000000000d R14: 0000000000000000 R15: 0000555e358cb8e0 </TASK> Modules linked in: kvmgt CR2: 00000000000000a0 ---[ end trace 0000000000000000 ]--- Cc: Wang, Zhi <zhi.a.wang@intel.com> Cc: He, Yu <yu.he@intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Zhi Wang <zhi.a.wang@intel.com> Fixes: bc7b0be3 ("drm/i915/gvt: Add basic debugfs infrastructure") Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20221219140357.769557-1-zhenyuw@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Björn Töpel authored
commit b2d473a6 upstream. In the compressed instruction extension, c.jr, c.jalr, c.mv, and c.add is encoded the following way (each instruction is 16b): ---+-+-----------+-----------+-- 100 0 rs1[4:0]!=0 00000 10 : c.jr 100 1 rs1[4:0]!=0 00000 10 : c.jalr 100 0 rd[4:0]!=0 rs2[4:0]!=0 10 : c.mv 100 1 rd[4:0]!=0 rs2[4:0]!=0 10 : c.add The following logic is used to decode c.jr and c.jalr: insn & 0xf007 == 0x8002 => instruction is an c.jr insn & 0xf007 == 0x9002 => instruction is an c.jalr When 0xf007 is used to mask the instruction, c.mv can be incorrectly decoded as c.jr, and c.add as c.jalr. Correct the decoding by changing the mask from 0xf007 to 0xf07f. Fixes: c22b0bcb ("riscv: Add kprobes supported") Signed-off-by:
Björn Töpel <bjorn@rivosinc.com> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230102160748.1307289-1-bjorn@kernel.org Cc: stable@vger.kernel.org Signed-off-by:
Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Dooks authored
commit b9b916ae upstream. If the get_user(x, ptr) has x as a pointer, then the setting of (x) = 0 is going to produce the following sparse warning, so fix this by forcing the type of 'x' when access_ok() fails. fs/aio.c:2073:21: warning: Using plain integer as NULL pointer Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Reviewed-by:
Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20221229170545.718264-1-ben-linux@fluff.org Cc: stable@vger.kernel.org Signed-off-by:
Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Pandruvada authored
commit b878d3ba upstream. Commit 473be511 ("thermal: int340x: processor_thermal: Add RFIM driver")' added rfi_restriction_data_rate_base string, mmio details and documentation, but missed adding attribute to sysfs. Add missing sysfs attribute. Fixes: 473be511 ("thermal: int340x: processor_thermal: Add RFIM driver") Cc: 5.11+ <stable@vger.kernel.org> # v5.11+ Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Begunkov authored
commit 12521a5d upstream. Jiffy to ktime CQ waiting conversion broke how we treat timeouts, in particular we rearm it anew every time we get into io_cqring_wait_schedule() without adjusting the timeout. Waiting for 2 CQEs and getting a task_work in the middle may double the timeout value, or even worse in some cases task may wait indefinitely. Cc: stable@vger.kernel.org Fixes: 22833966 ("io_uring: don't convert to jiffies for waiting on timeouts") Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/f7bffddd71b08f28a877d44d37ac953ddb01590d.1672915663.git.asml.silence@gmail.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Axboe authored
commit 9cea62b2 upstream. If we split a bio marked with REQ_NOWAIT, then we can trigger spurious EAGAIN if constituent parts of that split bio end up failing request allocations. Parts will complete just fine, but just a single failure in one of the chained bios will yield an EAGAIN final result for the parent bio. Return EAGAIN early if we end up needing to split such a bio, which allows for saner recovery handling. Cc: stable@vger.kernel.org # 5.15+ Link: https://github.com/axboe/liburing/issues/766 Reported-by:
Michael Kelley <mikelley@microsoft.com> Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Menzel authored
commit f685dd7a upstream. Commit 62d89a7d ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen") accidently decreases the maximum memory size for the Matrox G200eW (102b:0532) from 8 MB to 1 MB by missing one zero. This caused the driver initialization to fail with the messages below, as the minimum required VRAM size is 2 MB: [ 9.436420] matroxfb: Matrox MGA-G200eW (PCI) detected [ 9.444502] matroxfb: cannot determine memory size [ 9.449316] matroxfb: probe of 0000:0a:03.0 failed with error -1 So, add the missing 0 to make it the intended 16 MB. Successfully tested on the Dell PowerEdge R910/0KYD3D, BIOS 2.10.0 08/29/2013, that the warning is gone. While at it, add a leading 0 to the maxdisplayable entry, so it’s aligned properly. The value could probably also be increased from 8 MB to 16 MB, as the G200 uses the same values, but I have not checked any datasheet. Note, matroxfb is obsolete and superseded by the maintained DRM driver mga200, which is used by default on most systems where both drivers are available. Therefore, on most systems it was only a cosmetic issue. Fixes: 62d89a7d ("video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen") Link: https://lore.kernel.org/linux-fbdev/972999d3-b75d-5680-fcef-6e6905c52ac5@suse.de/T/#mb6953a9995ebd18acc8552f99d6db39787aec775 Cc: it+linux-fbdev@molgen.mpg.de Cc: Z. Liu <liuzx@knownsec.com> Cc: Rich Felker <dalias@libc.org> Cc: stable@vger.kernel.org Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Layton authored
commit cad85337 upstream. If v4 READDIR operation hits a mountpoint and gets back an error, then it will include that entry in the reply and set RDATTR_ERROR for it to the error. That's fine for "normal" exported filesystems, but on the v4root, we need to be more careful to only expose the existence of dentries that lead to exports. If the mountd upcall times out while checking to see whether a mountpoint on the v4root is exported, then we have no recourse other than to fail the whole operation. Cc: Steve Dickson <steved@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216777 Reported-by:
JianHong Yin <yin-jianhong@163.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rodrigo Branco authored
commit a664ec91 upstream. We missed the window between the TIF flag update and the next reschedule. Signed-off-by:
Rodrigo Branco <bsdaemon@google.com> Reviewed-by:
Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit d00dd2f2 upstream. After b3e34a47 ("x86/kexec: fix memory leak of elf header buffer"), freeing image->elf_headers in the error path of crash_load_segments() is not needed because kimage_file_post_load_cleanup() will take care of that later. And not clearing it could result in a double-free. Drop the superfluous vfree() call at the error path of crash_load_segments(). Fixes: b3e34a47 ("x86/kexec: fix memory leak of elf header buffer") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Acked-by:
Baoquan He <bhe@redhat.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20221122115122.13937-1-tiwai@suse.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
[ Upstream commit a05d3c91 ] [BACKGROUND] There is an incident report that, one user hibernated the system, with one btrfs on removable device still mounted. Then by some incident, the btrfs got mounted and modified by another system/OS, then back to the hibernated system. After resuming from the hibernation, new write happened into the victim btrfs. Now the fs is completely broken, since the underlying btrfs is no longer the same one before the hibernation, and the user lost their data due to various transid mismatch. [REPRODUCER] We can emulate the situation using the following small script: truncate -s 1G $dev mkfs.btrfs -f $dev mount $dev $mnt fsstress -w -d $mnt -n 500 sync xfs_freeze -f $mnt cp $dev $dev.backup # There is no way to mount the same cloned fs on the same system, # as the conflicting fsid will be rejected by btrfs. # Thus here we have to wipe the fs using a different btrfs. mkfs.btrfs -f $dev.backup dd if=$dev.backup of=$dev bs=1M xfs_freeze -u $mnt fsstress -w -d $mnt -n 20 umount $mnt btrfs check $dev The final fsck will fail due to some tree blocks has incorrect fsid. This is enough to emulate the problem hit by the unfortunate user. [ENHANCEMENT] Although such case should not be that common, it can still happen from time to time. From the view of btrfs, we can detect any unexpected super block change, and if there is any unexpected change, we just mark the fs read-only, and thaw the fs. By this we can limit the damage to minimal, and I hope no one would lose their data by this anymore. Suggested-by:
Goffredo Baroncelli <kreijack@libero.it> Link: https://lore.kernel.org/linux-btrfs/83bf3b4b-7f4c-387a-b286-9251e3991e34@bluemole.com/ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christoph Hellwig authored
[ Upstream commit 831ed60c ] To be able to use the Commands Supported and Effects Log for allowing unprivileged passtrough, it needs to be corretly reported for I/O commands as well. Return the I/O command effects from nvme_command_effects, and also add a default list of effects for the NVM command set. For other command sets, the Commands Supported and Effects log is required to be present already. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Kanchan Joshi <joshi.k@samsung.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christoph Hellwig authored
[ Upstream commit 61f37154 ] Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a single value to multiple array entries instead of repeated assignments. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Kanchan Joshi <joshi.k@samsung.com> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jens Axboe authored
[ Upstream commit 34319084 ] We only check the register opcode value inside the restricted ring section, move it into the main io_uring_register() function instead and check it up front. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yanjun Zhang authored
[ Upstream commit 3659fb5a ] The flush request initialized by blk_kick_flush has NULL bio, and it may be dealt with nvme_end_req during io completion. When blktrace is enabled, nvme_trace_bio_complete with multipath activated trying to access NULL pointer bio from flush request results in the following crash: [ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a [ 2517.835213] #PF: supervisor read access in kernel mode [ 2517.838724] #PF: error_code(0x0000) - not-present page [ 2517.842222] PGD 7b2d51067 P4D 0 [ 2517.845684] Oops: 0000 [#1] SMP NOPTI [ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S 5.15.67-0.cl9.x86_64 #1 [ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022 [ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp] [ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30 [ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba [ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286 [ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000 [ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000 [ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000 [ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8 [ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018 [ 2517.894434] FS: 0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000 [ 2517.898299] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0 [ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2517.913761] PKRU: 55555554 [ 2517.917558] Call Trace: [ 2517.921294] <TASK> [ 2517.924982] nvme_complete_rq+0x1c3/0x1e0 [nvme_core] [ 2517.928715] nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp] [ 2517.932442] nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp] [ 2517.936137] ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp] [ 2517.939830] tcp_read_sock+0x9c/0x260 [ 2517.943486] nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp] [ 2517.947173] nvme_tcp_io_work+0x64/0x90 [nvme_tcp] [ 2517.950834] process_one_work+0x1e8/0x390 [ 2517.954473] worker_thread+0x53/0x3c0 [ 2517.958069] ? process_one_work+0x390/0x390 [ 2517.961655] kthread+0x10c/0x130 [ 2517.965211] ? set_kthread_struct+0x40/0x40 [ 2517.968760] ret_from_fork+0x1f/0x30 [ 2517.972285] </TASK> To avoid this situation, add a NULL check for req->bio before calling trace_block_bio_complete. Signed-off-by:
Yanjun Zhang <zhangyanjun@cestc.cn> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hans de Goede authored
[ Upstream commit a1dec9d7 ] The Advantech MICA-071 tablet deviates from the defaults for a non CR Bay Trail based tablet in several ways: 1. It uses an analog MIC on IN3 rather then using DMIC1 2. It only has 1 speaker 3. It needs the OVCD current threshold to be set to 1500uA instead of the default 2000uA to reliable differentiate between headphones vs headsets Add a quirk with these settings for this tablet. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jan Kara authored
[ Upstream commit 83c7423d ] When extending the last extent in the file within the last block, we wrongly computed the length of the last extent. This is mostly a cosmetical problem since the extent does not contain any data and the length will be fixed up by following operations but still. Fixes: 1f3868f0 ("udf: Fix extending file within last block") Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhengchao Shao authored
[ Upstream commit fe69230f ] When linktype is unknown or kzalloc failed in cfctrl_linkup_request(), pkt is not released. Add release process to error path. Fixes: b482cd20 ("net-caif: add CAIF core protocol stack") Fixes: 8d545c8f ("caif: Disconnect without waiting for response") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-