Merge "ARM: mvebu: DT changes for v3.18" from Jason Cooper:

mvebu DT changes for v3.18

 - Armada 375
    - Add RTC support

 - Armada 370
    - Add proper pinmuxing
    - Add SSCG
    - Add gpio-fan
    - Add LED support

 - change Intersil vendor prefix to isil
 - use improved Armada SPI compatible string

* tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu

:
  ARM: mvebu: add user LED support of Armada 370 RD
  ARM: mvebu: add gpio fan support to Armada 370 RD
  ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
  ARM: mvebu: use improved armada spi device tree compatible name
  ARM: mvebu: add SSCG to Armada 370 Device Tree
  ARM: mvebu: Add proper pin muxing on Armada 370 RD board
  ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104
  ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102
  ARM: mvebu: Add proper pin muxing on the Armada 370 DB board
  ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board
  ARM: mvebu: Add network pin mux configuration for the Armada 370 SoC
  ARM: mvebu: Add RTC support for Armada 375

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "second bunch of dts changes for 3.18" from Heiko Stubner:

More peripheral support for Rockchip SoCs
- dwc2 usb controllers
- spi controllers
- emmc controller

* tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip

:
  ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock
  ARM: dts: rockchip: fix rk3188 emmc pull references
  ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
  ARM: dts: rockchip: clean up rk3xxx mmc nodes
  ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
  ARM: dts: rockchip: add Cortex-A9 SPI controller nodes
  ARM: dts: rockchip: enable usb ports on Radxa Rock
  ARM: dts: rockchip: add dwc2 controllers for rk3066 and rk3188
  ARM: dts: rockchip: remove rockchip,bus-index from rk3xxx i2c0
  ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808
  ARM: dts: Add rk808 PMIC to rk3288-evb-rk808
  ARM: dts: Add mshc aliases for rk3288
  ARM: dts: Add SPI nodes to rk3288
  ARM: dts: Enable USB host1(dwc) on rk3288-evb
  ARM: dts: add rk3288 dwc2 controller support
  ARM: dts: Add sdio0 and sdio1 to the rk3288

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt

Merge "qcom DT changes for v3.18-2" from Kumar Gala:

Qualcomm ARM Based Device Tree Updates for v3.18-2

* Added SDCC nodes on MSM8960/CDP and MSM8660/SURF
* Added I2C and SDCC4/WLAN on APQ8064/IFC6410
* Added I2C on MSM8984/DB8074

* tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom

:
  ARM: DT: msm8960: Add sdcc nodes
  ARM: DT: msm8660: Add sdcc nodes
  ARM: DT: apq8064: Add i2c device nodes
  ARM: DT: apq8064: add support to sdcc4 for wlan.
  ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt

Merge "qcom DT changes for v3.18" from Kumar Gala:

Qualcomm ARM Based Device Tree Updates for v3.18

* Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board
* Added IPQ8064 dt support for basic SoC and AP148 board
* Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks
* Added PMIC 8058 dt support on MSM8660, enables PMIC based power key,
  keypad, rtc, and vibrator
* Added PMIC 8921 dt support on MSM8960, enables PMIC based power key,
  keypad, and rtc

* tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom

:
  ARM: DT: QCOM: apq8064: Add dma support for sdcc node
  ARM: DT: apq8064: Add sdcc support via mcci driver.
  ARM: dts: qcom: Add 8064 multimedia clock controller node
  ARM: DT: APQ8064: Add node for ps_hold function in pinctrl
  ARM: DT: APQ8064: Add pinctrl support
  ARM: dts: qcom: Add TLMM DT node for APQ8084
  ARM: dts: qcom: Add initial IFC6540 board device tree
  ARM: dts: msm: Add 8058 PMIC to ssbi bus
  ARM: dts: msm: Add 8921 PMIC to ssbi bus
  ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
  ARM: dts: qcom: Add APQ8084 serial port DT node
  ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap dts changes for v3.18 merge window" from Tony Lindgren:

Changes for .dts files for omaps for v3.18 merge window:

- Updates for gta04 to add gta04a3 model
- Add support for Tehnexion TAO3530 boards
- Regulator names for beaglebone
- Pinctrl related updates for omap5, dra7 and am437
- Model name fix for sbc-t54
- Enable mailbox for various omaps

* tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

: (291 commits)
  ARM: dts: OMAP2+: Add sub mailboxes device node information
  ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
  ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
  ARM: dts: AM437x: switch to compatible pinctrl
  ARM: dts: DRA7: switch to compatible pinctrl
  ARM: dts: OMAP5: switch to compatible pinctrl
  ARM: dts: am335x-boneblack: Add names for remaining regulators
  ARM: dts: sbc-t54: fix model property
  ARM: dts: omap5.dtsi: add DSS RFBI node
  ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
  ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
  ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
  ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock
  ARM: OMAP2+: board-generic: add support for AM57xx family
  ARM: dts: dra72-evm: Add tps65917 PMIC node
  ARM: dts: dra72-evm: Enable I2C1 node
  Linux 3.17-rc3
  unicore32: Fix build error
  vexpress/spc: fix a build warning on array bounds
  spi: sh-msiof: Fix transmit-only DMA transfers
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

On Rockchip RK3188 SoCs the platform driver emac_rockchip is used. This variant driver
enables this regulator when the device driver is loaded. The phy no longer needs
to be always on.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch adds i2c pinctrl DT node for IFC6410 board.  It also adds
 necessary DT support for i2c eeprom which is present on IFC6410.

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

This patch adds sdcc4 node to enable wlan support on IFC6410

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Add support for i2c controller on the DB8074 board.  It also adds necessary
DT support for i2c eeprom which is present on DB8074 board.

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Fix a copy'n'paste error making the rk3188 emmc pinctrl nodes reference
the pcfg_pull_default setting that is not available on rk3188.

Reported-by: Naoki FUKAUMI <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The host and otg regulator pinctrl settings got swapped, making the host
reference the otg pinctrl and the other way round. The actual pins are
correct (gpio0-3 for host and gpio2-31 for otg).

Reported-by: Naoki FUKAUMI <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The Armada 370 RD has a GPIO controlled LED connected on MPP32, so
this commit adds the relevant hardware description to Armada 370 RD
Device Tree.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1410429419-29820-3-git-send-email-thomas.petazzoni@free-electrons.com


Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The Armada 370 RD platform has a GPIO-controlled fan on MPP8, so this
commit adds the relevant hardware description to Armada 370 RD Device
Tree.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1410429419-29820-2-git-send-email-thomas.petazzoni@free-electrons.com


Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Commit 356649ab

 ("ARM: dts: rockchip: unuse the slot-node and deprecate
the supports-highspeed for dw-mmc") removed the slots but not the #xx-cells
properties describing the subnodes. Do this now.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add the controller node, pinctrl settings for the customizable pins
and sort the controllers like on rk3288 as emmc, sdmmc, sdio for
handling convenience.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This adds basic spi nodes and pinctrl settings to the rk3066 and rk3188
devicetree files.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This enables both the otg and host port and adds the vbus regulators
on the Radxa Rock board. As we don't have phy support yet, the vbus
regulators are added in always-on mode.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add the two dwc2 controllers providing an otg and a designated host port.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This is a remnant from the first i2c driver iteration that seems to have
been forgotten and thus made its way into the dtsi. Remove it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The sub-mailbox devices are added to the Mailbox DT nodes on
OMAP2420, OMAP2430, OMAP3, AM33xx, AM43xx, OMAP4 and OMAP5
family of SoCs. This data represents the same mailboxes that
used to be represented in hwmod attribute data previously.
The node name is chosen based on the .name field of
omap_mbox_dev_info structure used in the hwmod data.

Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds dma support in both sdcc1 and sdcc3 device node.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

This patch adds support to SD card controller using generic pl180 mmci driver.
This patch also adds temporary fixed regulator to get it going till the actual
regulator is mainlined.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Add the mmcc node so that we can probe and use the multimedia
clocks on apq8064.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

This patch adds DT support to configure GPIO_78 as function ps_hold
on apq8064.

CC: Rob Herring <robh+dt@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

This patch adds device tree nodes to support pinctrl for apq8064 SOC

CC: Rob Herring <robh+dt@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

This patch adds the TLMM node for the APQ8084 platform.

Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Add basic support for the IFC6540 single-board computer boards, that are
based on the APQ8084 SoC. This patch adds the initial device tree and the
neccessary nodes required for enabling the serial port and eMMC.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Add the PMIC and the sub-devices that are currently supported in
the kernel to the DT.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

Add the PMIC and the sub-devices that are currently supported in
the kernel to the DT.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

We should be able to talk to the PMIC at 400kHz.  No need to talk at
the slow 100kHz.

As measured by ftrace (with a bunch of extra patches, since cpufreq
for rk808 hasn't landed yet):
  before this change: cpu0_set_target() => ~500us
  after this change:  cpu0_set_target() => ~300us

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by Addy Ke <addy.ke@rock-chips.com>
Tested-by Addy Ke <addy.ke@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Merge tag 'renesas-dt4-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

 into next/dt

Pull "Fourth Round of Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:

* Add r8a7794 SoC and Alt board device tree
* Correct lager memory map

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'renesas-dt4-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Initial Alt board device tree
  ARM: shmobile: Initial r8a7794 SoC device tree
  ARM: shmobile: lager: correct memory map

Merge branch 'pull/v3.18/for-dt-pinctrl-updates' of https://github.com/nmenon/linux-2.6-playground into omap-for-v3.18/dt

Currently there is a wild mixture of isl, isil, and intersil
compatibles in the kernel. At this point, changing the vendor
symbol to the most often used variant, which is equal to the
NASDAQ symbol, isil, should not hurt.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lkml.kernel.org/r/1410167960-554-4-git-send-email-p.zabel@pengutronix.de


Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Switch the Armada SoC SPI port device tree binding to use the new improved
armada-370-spi compatible name. This allows for a wider range of baud rates
to be used.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1410147029-30067-1-git-send-email-gerg@uclinux.org


Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The Armada 370 SoC has a Spread Spectrum Clock Generator. This commit
adds the description of this generator to the Device Tree describing
this SoC.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Link: https://lkml.kernel.org/r/1409645719-20003-4-git-send-email-gregory.clement@free-electrons.com


Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Pull "arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries" From Dinh Nguyen:

5 of the 6 patches are DTS updates and the 1 patch is updating
the MAINTAINERS entry with my new email address.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'socfpga_update_for_v3.18' of git://git.rocketboards.org/linux-socfpga-next:
  arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries.
  ARM: dts: socfpga: memreserve first 4KB for future system use
  ARM: dts: socfpga: Add SD card detect
  ARM: dts: socfpga: remove extra alias in the ArriaV devkit
  ARM: dts: socfpga: unuse the slot-node and deprecate the supports-highspeed for dw-mmc
  MAINTAINERS: update entries for ARM/SOCFPGA platform

Mark rxd as wakeupcapable for 115200n8 no hardware-flow control
configuration. If h/w flow control is being used, then rts/cts
appropriately should be used.

Signed-off-by: Nishanth Menon <nm@ti.com>

We've had deeper idle states working on omaps for few years now,
but only in the legacy mode. When booted with device tree, the
wake-up events did not have a chance to work until commit
3e6cee17 ("pinctrl: single: Add support for wake-up interrupts")
that recently got merged. In addition to that we also needed
commit 79d97015

 ("of/irq: create interrupts-extended property")
that's now also merged.

Note that there's no longer need to specify the wake-up bit in
the pinctrl settings, the request_irq on the wake-up pin takes
care of that.

Signed-off-by: Nishanth Menon <nm@ti.com>