- Aug 19, 2020
-
-
David S. Miller authored
Johannes Berg says: ==================== netlink: allow NLA_BINARY length range validation In quite a few places (perhaps particularly in wireless) we need to validation an NLA_BINARY attribute with both a minimum and a maximum length. Currently, we can do either of the two, but not both, given that we have NLA_MIN_LEN (minimum length) and NLA_BINARY (maximum). Extend the range mechanisms that we use for integer validation to apply to NLA_BINARY as well. After converting everything to use NLA_POLICY_MIN_LEN() we can thus get rid of the NLA_MIN_LEN type since that's now a special case of NLA_BINARY with a minimum length validation. Similarly, NLA_EXACT_LEN can be specified using NLA_POLICY_EXACT_LEN() and also maps to the new NLA_BINARY validation (min == max == desired length). Finally, NLA_POLICY_EXACT_LEN_WARN() also gets to be a somewhat special case of this. I haven't included the patch here now that converts nl82011 to use this because it doesn't apply without another cleanup patch, but we can remove a number of hand-coded min/max length checks and get better error messages from the general validation code while doing that. As I had originally built the netlink policy export to userspace in a way that has min/max length for NLA_BINARY (for the types that we used to call NLA_MIN_LEN, NLA_BINARY and NLA_EXACT_LEN) anyway, it doesn't really change anything there except that now there's a chance that userspace sees min length < max length, which previously wasn't possible. v2: * fix the min<max comment to correctly say min<=max ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Add range validation for NLA_BINARY, allowing validation of any combination of combination minimum or maximum lengths, using the existing NLA_POLICY_RANGE()/NLA_POLICY_FULL_RANGE() macros, just like for integers where the value is checked. Also make NLA_POLICY_EXACT_LEN(), NLA_POLICY_EXACT_LEN_WARN() and NLA_POLICY_MIN_LEN() special cases of this, removing the old types NLA_EXACT_LEN and NLA_MIN_LEN. This allows us to save some code where both minimum and maximum lengths are requires, currently the policy only allows maximum (NLA_BINARY), minimum (NLA_MIN_LEN) or exact (NLA_EXACT_LEN), so a range of lengths cannot be accepted and must be checked by the code that consumes the attributes later. Also, this allows advertising the correct ranges in the policy export to userspace. Here, NLA_MIN_LEN and NLA_EXACT_LEN already were special cases of NLA_BINARY with min and min/max length respectively. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Change places that open-code NLA_POLICY_MIN_LEN() to use the macro instead, giving us flexibility in how we handle the details of the macro. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Change places that open-code NLA_POLICY_EXACT_LEN() to use the macro instead, giving us flexibility in how we handle the details of the macro. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Acked-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Aug 18, 2020
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull mailmap update from Kees Cook: "This was originally part of my pstore tree, but when I realized that mailmap needed re-alphabetizing, I decided to wait until -rc1 to send this, as I saw a lot of mailmap additions pending in -next for the merge window. It's a programmatic reordering and the addition of a pstore contributor's preferred email address" * tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mailmap: Add WeiXiong Liao mailmap: Restore dictionary sorting
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Another batch of fixes: 1) Remove nft_compat counter flush optimization, it generates warnings from the refcount infrastructure. From Florian Westphal. 2) Fix BPF to search for build id more robustly, from Jiri Olsa. 3) Handle bogus getopt lengths in ebtables, from Florian Westphal. 4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and Oleksij Rempel. 5) Reset iter properly on mptcp sendmsg() error, from Florian Westphal. 6) Show a saner speed in bonding broadcast mode, from Jarod Wilson. 7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones. 8) Fix double unregister in bonding during namespace tear down, from Cong Wang. 9) Disable RP filter during icmp_redirect selftest, from David Ahern" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) otx2_common: Use devm_kcalloc() in otx2_config_npa() net: qrtr: fix usage of idr in port assignment to socket selftests: disable rp_filter for icmp_redirect.sh Revert "net: xdp: pull ethernet header off packet after computing skb->protocol" phylink: <linux/phylink.h>: fix function prototype kernel-doc warning mptcp: sendmsg: reset iter on error redux net: devlink: Remove overzealous WARN_ON with snapshots tipc: not enable tipc when ipv6 works as a module tipc: fix uninit skb->data in tipc_nl_compat_dumpit() net: Fix potential wrong skb->protocol in skb_vlan_untag() net: xdp: pull ethernet header off packet after computing skb->protocol ipvlan: fix device features bonding: fix a potential double-unregister can: j1939: add rxtimer for multipacket broadcast session can: j1939: abort multipacket broadcast session when timeout occurs can: j1939: cancel rxtimer on multipacket broadcast session complete can: j1939: fix support for multipacket broadcast message net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs' net: fddi: skfp: cfm: Remove set but unused variable 'oldstate' net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs' ...
-
vulab authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Necip Fazil Yildiran authored
Passing large uint32 sockaddr_qrtr.port numbers for port allocation triggers a warning within idr_alloc() since the port number is cast to int, and thus interpreted as a negative number. This leads to the rejection of such valid port numbers in qrtr_port_assign() as idr_alloc() fails. To avoid the problem, switch to idr_alloc_u32() instead. Fixes: bdabad3e ("net: Add Qualcomm IPC router") Reported-by:
<syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com> Signed-off-by:
Necip Fazil Yildiran <necip@google.com> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
h1 is initially configured to reach h2 via r1 rather than the more direct path through r2. If rp_filter is set and inherited for r2, forwarding fails since the source address of h1 is reachable from eth0 vs the packet coming to it via r1 and eth1. Since rp_filter setting affects the test, explicitly reset it. Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kees Cook authored
WeiXiong Liao noted to me offlist that his preference for email address had changed and that he'd like it updated in the mailmap so people discussing pstore/blk would be able to reach him. Cc: WeiXiong Liao <gmpy.liaowx@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org>
-
Kees Cook authored
Several names had been recently appended (instead of inserted). While git-shortlog doesn't need this file to be sorted, it helps humans to keep it organized this way. Sort the entire file (which includes some minor shuffling for dictionary order). Done with the following commands: grep -E '^(#|$)' .mailmap > .mailmap.head grep -Ev '^(#|$)' .mailmap > .mailmap.body sort -f .mailmap.body > .mailmap.body.sort cat .mailmap.head .mailmap.body.sort > .mailmap rm .mailmap.head .mailmap.body.sort Signed-off-by:
Kees Cook <keescook@chromium.org>
-
David S. Miller authored
This reverts commit f8414a8d . eth_type_trans() does the necessary pull on the skb. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Fix a kernel-doc warning for the pcs_config() function prototype: ../include/linux/phylink.h:406: warning: Excess function parameter 'permit_pause_to_mac' description in 'pcs_config' Fixes: 7137e18f ("net: phylink: add struct phylink_pcs") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Howells authored
Impose a limit on the number of watches that a user can hold so that they can't use this mechanism to fill up all the available memory. This is done by putting a counter in user_struct that's incremented when a watch is allocated and decreased when it is released. If the number exceeds the RLIMIT_NOFILE limit, the watch is rejected with EAGAIN. This can be tested by the following means: (1) Create a watch queue and attach it to fd 5 in the program given - in this case, bash: keyctl watch_session /tmp/nlog /tmp/gclog 5 bash (2) In the shell, set the maximum number of files to, say, 99: ulimit -n 99 (3) Add 200 keyrings: for ((i=0; i<200; i++)); do keyctl newring a$i @s || break; done (4) Try to watch all of the keyrings: for ((i=0; i<200; i++)); do echo $i; keyctl watch_add 5 %:a$i || break; done This should fail when the number of watches belonging to the user hits 99. (5) Remove all the keyrings and all of those watches should go away: for ((i=0; i<200; i++)); do keyctl unlink %:a$i; done (6) Kill off the watch queue by exiting the shell spawned by watch_session. Fixes: c73be61c ("pipe: Add general notification queue support") Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Aug 17, 2020
-
-
Florian Westphal authored
This fix wasn't correct: When this function is invoked from the retransmission worker, the iterator contains garbage and resetting it causes a crash. As the work queue should not be performance critical also zero the msghdr struct. Fixes: 35759383 "(mptcp: sendmsg: reset iter on error)" Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
It is possible to trigger this WARN_ON from user space by triggering a devlink snapshot with an ID which already exists. We don't need both -EEXISTS being reported and spamming the kernel log. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When using ipv6_dev_find() in one module, it requires ipv6 not to work as a module. Otherwise, this error occurs in build: undefined reference to `ipv6_dev_find'. So fix it by adding "depends on IPV6 || IPV6=n" to tipc/Kconfig, as it does in sctp/Kconfig. Fixes: 5a6f6f57 ("tipc: set ub->ifindex for local ipv6 address") Reported-by:
kernel test robot <lkp@intel.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cong Wang authored
__tipc_nl_compat_dumpit() has two callers, and it expects them to pass a valid nlmsghdr via arg->data. This header is artificial and crafted just for __tipc_nl_compat_dumpit(). tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well as some nested attribute, TIPC_NLA_SOCK. But the other caller tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized on this call path. Fix this by just adding a similar nlmsghdr without any payload in tipc_nl_compat_dumpit(). This bug exists since day 1, but the recent commit 6ea67769 ("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it easier to appear. Reported-and-tested-by:
<syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com> Fixes: d0796d1e ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Endianness issue in IPv4 option support in nft_exthdr, from Stephen Suryaputra. 2) Removes the waitcount optimization in nft_compat, from Florian Westphal. 3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from Florian Westphal. 4) Memleak in chain binding support, also from Florian. 5) Simplify nft_flowtable.sh selftest, from Fabian Frederick. 6) Optional MTU arguments for selftest nft_flowtable.sh, also from Fabian. 7) Remove noise error report when killing process in selftest nft_flowtable.sh, from Fabian Frederick. 8) Reject bogus getsockopt option length in ebtables, from Florian Westphal. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.9-20200815' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-08-15 this is a pull request of 4 patches for net/master. All patches are by Zhang Changzhong and fix broadcast related problems in the j1939 CAN networking stack. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Miaohe Lin authored
We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or we may access the wrong data. Fixes: 0d5501c1 ("net: Always untag vlan-tagged traffic on input.") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
When an XDP program changes the ethernet header protocol field, eth_type_trans is used to recalculate skb->protocol. In order for eth_type_trans to work correctly, the ethernet header must actually be part of the skb data segment, so the code first pushes that onto the head of the skb. However, it subsequently forgets to pull it back off, making the behavior of the passed-on packet inconsistent between the protocol modifying case and the static protocol case. This patch fixes the issue by simply pulling the ethernet header back off of the skb head. Fixes: 29724956 ("net: fix generic XDP to handle if eth header was mangled") Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cong Wang authored
When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c ("net: Introduce unregister_netdevice_many()") Reported-by:
<syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Meelis Roos <mroos@linux.ee> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Aug 16, 2020
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by:
<syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com> Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
- Aug 15, 2020
-
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes, one for stable fixing mkdir path with the 'idsfromsid' mount option" * tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix mkdir when idsfromsid configured on mount cifs: Convert to use the fallthrough macro cifs: Fix an error pointer dereference in cifs_mount()
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Stable fixes: - pNFS: Don't return layout segments that are being used for I/O - pNFS: Don't move layout segments off the active list when being used for I/O Features: - NFS: Add support for user xattrs through the NFSv4.2 protocol - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC - NFSv4.0 allow nconnect for v4.0 Bugfixes and cleanups: - nfs: ensure correct writeback errors are returned on close() - nfs: nfs_file_write() should check for writeback errors - nfs: Fix getxattr kernel panic and memory overflow - NFS: Fix the pNFS/flexfiles mirrored read failover code - SUNRPC: dont update timeout value on connection reset - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS - sunrpc: destroy rpc_inode_cachep after unregister_filesystem" * tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits) NFS: Fix flexfiles read failover fs: nfs: delete repeated words in comments rpc_pipefs: convert comma to semicolon nfs: Fix getxattr kernel panic and memory overflow NFS: Don't return layout segments that are in use NFS: Don't move layouts to plh_return_segs list while in use NFS: Add layout segment info to pnfs read/write/commit tracepoints NFS: Add tracepoints for layouterror and layoutstats. NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close() SUNRPC dont update timeout value on connection reset nfs: nfs_file_write() should check for writeback errors nfs: ensure correct writeback errors are returned on close() NFSv4.2: xattr cache: get rid of cache discard work queue NFS: remove redundant initialization of variable result NFSv4.0 allow nconnect for v4.0 freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS sunrpc: destroy rpc_inode_cachep after unregister_filesystem NFSv4.2: add client side xattr caching. NFSv4.2: hook in the user extended attribute handlers NFSv4.2: add the extended attribute proc functions. ...
-