Pull USB fixes from Greg KH:
 "Here are number of small USB fixes for 5.3-rc5.

  Syzbot has been on a tear recently now that it has some good USB
  debugging hooks integrated, so there's a number of fixes in here found
  by those tools for some _very_ old bugs. Also a handful of gadget
  driver fixes for reported issues, some hopefully-final dma fixes for
  host controller drivers, and some new USB serial gadget driver ids.

  All of these have been in linux-next this week with no reported issues
  (the usb-serial ones were in linux-next in its own branch, but merged
  into mine on Friday)"

* tag 'usb-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: add a hcd_uses_dma helper
  usb: don't create dma pools for HCDs with a localmem_pool
  usb: chipidea: imx: fix EPROBE_DEFER support during driver probe
  usb: host: fotg2: restart hcd after port reset
  USB: CDC: fix sanity checks in CDC union parser
  usb: cdc-acm: make sure a refcount is taken early enough
  USB: serial: option: add the BroadMobi BM818 card
  USB: serial: option: Add Motorola modem UARTs
  USB: core: Fix races in character device registration and deregistraion
  usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt
  usb: gadget: composite: Clear "suspended" on reset/disconnect
  usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role"
  USB: serial: option: add D-Link DWM-222 device ID
  USB: serial: option: Add support for ZTE MF871A

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into this series. This contains:

   - Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
     were still corner cases there, and even though I had a solution for
     it, it's too involved for this stage. (me)

   - Set of NVMe fixes (via Sagi)

   - io_uring fix for fixed buffers (Anthony)

   - io_uring defer issue fix (Jackie)

   - Regression fix for queue sync at exit time (zhengbin)

   - xen blk-back memory leak fix (Wenwen)"

* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
  io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
  block: remove REQ_NOWAIT_INLINE
  io_uring: fix manual setup of iov_iter for fixed buffers
  xen/blkback: fix memory leaks
  blk-mq: move cancel of requeue_work to the front of blk_exit_queue
  nvme-pci: Fix async probe remove race
  nvme: fix controller removal race with scan work
  nvme-rdma: fix possible use-after-free in connect error flow
  nvme: fix a possible deadlock when passthru commands sent to a multipath device
  nvme-core: Fix extra device_put() call on error path
  nvmet-file: fix nvmet_file_flush() always returning an error
  nvmet-loop: Flush nvme_delete_wq when removing the port
  nvmet: Fix use-after-free bug when a port is removed
  nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns

Pull Hyper-V fixes from Sasha Levin:

 - A few fixes for the userspace hyper-v tools from Adrian Vladu.

 - A fix for the hyper-v MAINTAINERs entry from Lan Tianyu.

 - Fix for SPDX license identifier in the userspace tools from Nishad
   Kamdar.

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  MAINTAINERS: Fix Hyperv vIOMMU driver file name
  tools: hv: Use the correct style for SPDX License Identifier
  tools: hv: fix typos in toolchain
  tools: hv: fix KVP and VSS daemons exit code
  tools: hv: fixed Python pep8/flake8 warnings for lsvmbus

The Hyperv vIOMMU file name should be "hyperv-iommu.c" rather
than "hyperv_iommu.c". This patch is to fix it.

Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

This patch corrects the SPDX License Identifier style
in the trace header file related to Microsoft Hyper-V
client drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46



Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix typos in the HyperV toolchain.

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HyperV KVP and VSS daemons should exit with 0 when the '--help'
or '-h' flags are used.

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fixed pep8/flake8 python style code for lsvmbus tool.

The TAB indentation was on purpose ignored (pep8 rule W191) to make
sure the code is complying with the Linux code guideline.
The following command doe not show any warnings now:
pep8 --ignore=W191 lsvmbus
flake8 --ignore=W191 lsvmbus

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Pull i2c fixes from Wolfram Sang:
 "I2C has one revert because of a regression, two fixes for tiny race
  windows (which we were not able to trigger), a MAINTAINERS addition,
  and a SPDX fix"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32: Use the correct style for SPDX License Identifier
  i2c: emev2: avoid race when unregistering slave client
  i2c: rcar: avoid race when unregistering slave client
  MAINTAINERS: i2c-imx: take over maintainership
  Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"

Pull RISC-V fixes from Paul Walmsley:

 - Two patches to fix significant bugs in floating point register
   context handling

 - A minor fix in RISC-V flush_tlb_page(), to supply a valid end address
   to flush_tlb_range()

 - Two minor defconfig additions: to build the virtio hwrng driver by
   default (for QEMU targets), and to partially synchronize the 32-bit
   defconfig with the 64-bit defconfig

* tag 'riscv/for-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Make __fstate_clean() work correctly.
  riscv: Correct the initialized flow of FP register
  riscv: defconfig: Update the defconfig
  riscv: rv32_defconfig: Update the defconfig
  riscv: fix flush_tlb_range() end address for flush_tlb_page()

Merge tag 'usb-serial-5.3-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial

 into usb-linus

Johan writes:

USB-serial fixes for 5.3-rc5

Here are some new modem device ids.

All have been in linux-next with no reported issues.

Signed-off-by: Johan Hovold <johan@kernel.org>

* tag 'usb-serial-5.3-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add the BroadMobi BM818 card
  USB: serial: option: Add Motorola modem UARTs
  USB: serial: option: add D-Link DWM-222 device ID
  USB: serial: option: Add support for ZTE MF871A

Pull Xtensa fix from Max Filippov:
 "Add missing isync into cpu_reset to make sure ITLB changes are
  effective"

* tag 'xtensa-20190816' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add missing isync to the cpu_reset TLB code

Pull arm64 fixes from Catalin Marinas:

 - Don't taint the kernel if CPUs have different sets of page sizes
   supported (other than the one in use).

 - Issue I-cache maintenance for module ftrace trampoline.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side
  arm64: cpufeature: Don't treat granule sizes as strict

The initial support for dynamic ftrace trampolines in modules made use
of an indirect branch which loaded its target from the beginning of
a special section (e71a4e1b ("arm64: ftrace: add support for far
branches to dynamic ftrace")). Since no instructions were being patched,
no cache maintenance was needed. However, later in be0f272b ("arm64:
ftrace: emit ftrace-mod.o contents through code") this code was reworked
to output the trampoline instructions directly into the PLT entry but,
unfortunately, the necessary cache maintenance was overlooked.

Add a call to __flush_icache_range() after writing the new trampoline
instructions but before patching in the branch to the trampoline.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: be0f272b

 ("arm64: ftrace: emit ftrace-mod.o contents through code")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull power management fixes from Rafael Wysocki:
 "These add a check to avoid recent suspend-to-idle power regression on
  systems with NVMe drives where the PCIe ASPM policy is "performance"
  (or when the kernel is built without ASPM support), fix an issue
  related to frequency limits in the schedutil cpufreq governor and fix
  a mistake related to the PM QoS usage in the cpufreq core introduced
  recently.

  Specifics:

   - Disable NVMe power optimization related to suspend-to-idle added
     recently on systems where PCIe ASPM is not able to put PCIe links
     into low-power states to prevent excess power from being drawn by
     the system while suspended (Rafael Wysocki).

   - Make the schedutil governor handle frequency limits changes
     properly in all cases (Viresh Kumar).

   - Prevent the cpufreq core from treating positive values returned by
     dev_pm_qos_update_request() as errors (Viresh Kumar)"

* tag 'pm-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled
  PCI/ASPM: Add pcie_aspm_enabled()
  cpufreq: schedutil: Don't skip freq update when limits change
  cpufreq: dev_pm_qos_update_request() can return 1 on success

Pull dmaengine fixes from Vinod Koul:
 "Fixes in dmaengine drivers for:

   - dw-edma: endianess, _iomem type and stack usages

   - ste_dma40: unneeded variable and null-pointer dereference

   - tegra210-adma: unused function

   - omap-dma: off-by-one fix"

* tag 'dmaengine-fix-5.3-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  omap-dma/omap_vout_vrfb: fix off-by-one fi value
  dmaengine: stm32-mdma: Fix a possible null-pointer dereference in stm32_mdma_irq_handler()
  dmaengine: tegra210-adma: Fix unused function warnings
  dmaengine: ste_dma40: fix unneeded variable warning
  dmaengine: dw-edma: fix endianess confusion
  dmaengine: dw-edma: fix __iomem type confusion
  dmaengine: dw-edma: fix unnecessary stack usage

Pull sound fixes from Takashi Iwai:
 "All small fixes targeted for stable:

   - Two fixes for USB-audio with malformed descriptor, spotted by
     fuzzers

   - Two fixes Conexant HD-audio codec wrt power management

   - Quirks for HD-audio AMD platform and HP laptop

   - HD-audio memory leak fix"

* tag 'sound-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_term
  ALSA: usb-audio: Fix an OOB bug in parse_audio_mixer_unit
  ALSA: hda - Add a generic reboot_notify
  ALSA: hda - Let all conexant codec enter D3 when rebooting
  ALSA: hda/realtek - Add quirk for HP Envy x360
  ALSA: hda - Fix a memory leak bug
  ALSA: hda - Apply workaround for another AMD chip 1022:1487

Pull drm fixes from Dave Airlie:
 "Nothing too crazy this week, one amdgpu fix to use vmalloc for a
  struct that grew in size, and another MST fix for nouveau, and some
  other misc fixes:

  i915:
   - single GVT use after free fix

  scheduler:
   - entity destruction race fix

  amdgpu:
   - struct allocation fix
   - gfx9 soft recovery fix

  nouveau:
   - followup MST fix

  ast:
   - vga register race fix"

* tag 'drm-fixes-2019-08-16' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau: Only recalculate PBN/VCPI on mode/connector changes
  drm/ast: Fixed reboot test may cause system hanged
  drm/scheduler: use job count instead of peek
  drm/amd/display: use kvmalloc for dc_state (v2)
  drm/amdgpu: fix gfx9 soft recovery
  drm/i915: Use after free in error path in intel_vgpu_create_workload()

* pm-cpufreq:
  cpufreq: schedutil: Don't skip freq update when limits change
  cpufreq: dev_pm_qos_update_request() can return 1 on success

Merge tag 'drm-intel-fixes-2019-08-15' of git://anongit.freedesktop.org/drm/drm-intel

 into drm-fixes

drm/i915 fixes for v5.4-rc5:
- GVT use-after-free fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zhkag9ic.fsf@intel.com

`check_input_term` recursively calls itself with input from
device side (e.g., uac_input_terminal_descriptor.bCSourceID)
as argument (id). In `check_input_term`, if `check_input_term`
is called with the same `id` argument as the caller, it triggers
endless recursive call, resulting kernel space stack overflow.

This patch fixes the bug by adding a bitmap to `struct mixer_build`
to keep track of the checked ids and stop the execution if some id
has been checked (similar to how parse_audio_unit handles unitid
argument).

Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull xfs fixes from Darrick Wong:

 - Fix crashes when the attr fork isn't present due to errors but inode
   inactivation tries to zap the attr data anyway.

 - Convert more directory corruption debugging asserts to actual
   EFSCORRUPTED returns instead of blowing up later on.

 - Don't fail writeback just because we ran out of memory allocating
   metadata log data.

* tag 'xfs-5.3-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't crash on null attr fork xfs_bmapi_read
  xfs: remove more ondisk directory corruption asserts
  fs: xfs: xfs_log: Don't use KM_MAYFAIL at xfs_log_reserve().

Pull iomap fixlet from Darrick Wong:
 "A single update to the MAINTAINERS entry for iomap now that we've
  removed fs/iomap.c"

* tag 'iomap-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  MAINTAINERS: iomap: Remove fs/iomap.c record

This patch may fix two issues:

First, when IOSQE_IO_DRAIN set, the next IOs need to be inserted into
defer list to delay execution, but link io will be actively scheduled to
run by calling io_queue_sqe.

Second, when multiple LINK_IOs are inserted together with defer_list,
the LINK_IO is no longer keep order.

   |-------------|
   |   LINK_IO   |      ----> insert to defer_list  -----------
   |-------------|                                            |
   |   LINK_IO   |      ----> insert to defer_list  ----------|
   |-------------|                                            |
   |   LINK_IO   |      ----> insert to defer_list  ----------|
   |-------------|                                            |
   |   NORMAL_IO |      ----> insert to defer_list  ----------|
   |-------------|                                            |
                                                              |
                              queue_work at same time   <-----|

Fixes: 9e645e11

 ("io_uring: add support for sqe links")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We had a few issues with this code, and there's still a problem around
how we deal with error handling for chained/split bios. For now, just
revert the code and we'll try again with a thoroug solution. This
reverts commits:

e15c2ffa ("block: fix O_DIRECT error handling for bio fragments")
0eb6ddfb ("block: Fix __blkdev_direct_IO() for bio fragments")
6a43074e ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO")
893a1c97

 ("blk-mq: allow REQ_NOWAIT to return an error inline")

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit bd11b3a3 ("io_uring: don't use iov_iter_advance() for fixed
buffers") introduced an optimization to avoid using the slow
iov_iter_advance by manually populating the iov_iter iterator in some
cases.

However, the computation of the iterator count field was erroneous: The
first bvec was always accounted for an extent of page size even if the
bvec length was smaller.

In consequence, some I/O operations on fixed buffers were unable to
operate on the full extent of the buffer, consistently skipping some
bytes at the end of it.

Fixes: bd11b3a3

 ("io_uring: don't use iov_iter_advance() for fixed buffers")
Cc: stable@vger.kernel.org
Signed-off-by: Aleix Roca Nonell <aleix.rocanonell@bsc.es>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull auxdisplay fixes from Miguel Ojeda:
 "A few minor auxdisplay improvements:

   - A couple of small header cleanups for charlcd (Masahiro Yamada)

   - A trivial typo fix for the examples of cfag12864b (Masahiro Yamada)

   - An Kconfig help text improvement for charlcd (Mans Rullgard)

   - An error path fix for panel (zhengbin)"

* tag 'auxdisplay-for-linus-v5.3-rc5' of git://github.com/ojeda/linux:
  auxdisplay: Fix a typo in cfag12864b-example.c
  auxdisplay: charlcd: add include guard to charlcd.h
  auxdisplay: charlcd: move charlcd.h to drivers/auxdisplay
  auxdisplay: charlcd: add help text for backlight initial state
  auxdisplay: panel: need to delete scan_timer when misc_register fails in panel_attach

Pull devicetree fixes from Rob Herring:

 - Fix building DT binding examples for in tree builds

 - Correct some refcounting in adjust_local_phandle_references()

 - Update FSL FEC binding with deprecated properties

 - Schema fix in stm32 pinctrl

 - Fix typo in of_irq_parse_one docbook comment

* tag 'devicetree-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: irq: fix a trivial typo in a doc comment
  dt-bindings: pinctrl: stm32: Fix 'st,syscfg' schema
  dt-bindings: fec: explicitly mark deprecated properties
  of: resolver: Add of_node_put() before return and break
  dt-bindings: Fix generated example files getting added to schemas

The USB buffer allocation code is the only place in the usb core (and in
fact the whole kernel) that uses is_device_dma_capable, while the URB
mapping code uses the uses_dma flag in struct usb_bus.  Switch the buffer
allocation to use the uses_dma flag used by the rest of the USB code,
and create a helper in hcd.h that checks this flag as well as the
CONFIG_HAS_DMA to simplify the caller a bit.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20190811080520.21712-3-hch@lst.de


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the HCD provides a localmem pool we will never use the DMA pools, so
don't create them.

Fixes: b0310c2f

 ("USB: use genalloc for USB HCs with local memory")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20190811080520.21712-2-hch@lst.de


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If driver probe needs to be deferred, e.g. because ci_hdrc_add_device()
isn't ready yet, this driver currently misbehaves badly:
    a) success is still reported to the driver core (meaning a 2nd
       probe attempt will never be done), leaving the driver in
       a dysfunctional state and the hardware unusable

    b) driver remove / shutdown OOPSes:
    [  206.786916] Unable to handle kernel paging request at virtual address fffffdff
    [  206.794148] pgd = 880b9f82
    [  206.796890] [fffffdff] *pgd=abf5e861, *pte=00000000, *ppte=00000000
    [  206.803179] Internal error: Oops: 37 [#1] PREEMPT SMP ARM
    [  206.808581] Modules linked in: wl18xx evbug
    [  206.813308] CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 4.19.35+gf345c93b4195 #1
    [  206.821053] Hardware name: Freescale i.MX7 Dual (Device Tree)
    [  206.826813] PC is at ci_hdrc_remove_device+0x4/0x20
    [  206.831699] LR is at ci_hdrc_imx_remove+0x20/0xe8
    [  206.836407] pc : [<805cd4b0>]    lr : [<805d62cc>]    psr: 20000013
    [  206.842678] sp : a806be40  ip : 00000001  fp : 80adbd3c
    [  206.847906] r10: 80b1b794  r9 : 80d5dfe0  r8 : a8192c44
    [  206.853136] r7 : 80db93a0  r6 : a8192c10  r5 : a8192c00  r4 : a93a4a00
    [  206.859668] r3 : 00000000  r2 : a8192ce4  r1 : ffffffff  r0 : fffffdfb
    [  206.866201] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
    [  206.873341] Control: 10c5387d  Table: a9e0c06a  DAC: 00000051
    [  206.879092] Process systemd-shutdow (pid: 1, stack limit = 0xb271353c)
    [  206.885624] Stack: (0xa806be40 to 0xa806c000)
    [  206.889992] be40: a93a4a00 805d62cc a8192c1c a8170e10 a8192c10 8049a490 80d04d08 00000000
    [  206.898179] be60: 00000000 80d0da2c fee1dead 00000000 a806a000 00000058 00000000 80148b08
    [  206.906366] be80: 01234567 80148d8c a9858600 00000000 00000000 00000000 00000000 80d04d08
    [  206.914553] bea0: 00000000 00000000 a82741e0 a9858600 00000024 00000002 a9858608 00000005
    [  206.922740] bec0: 0000001e 8022c058 00000000 00000000 a806bf14 a9858600 00000000 a806befc
    [  206.930927] bee0: a806bf78 00000000 7ee12c30 8022c18c a806bef8 a806befc 00000000 00000001
    [  206.939115] bf00: 00000000 00000024 a806bf14 00000005 7ee13b34 7ee12c68 00000004 7ee13f20
    [  206.947302] bf20: 00000010 7ee12c7c 00000005 7ee12d04 0000000a 76e7dc00 00000001 80d0f140
    [  206.955490] bf40: ab637880 a974de40 60000013 80d0f140 ab6378a0 80d04d08 a8080470 a9858600
    [  206.963677] bf60: a9858600 00000000 00000000 8022c24c 00000000 80144310 00000000 00000000
    [  206.971864] bf80: 80101204 80d04d08 00000000 80d04d08 00000000 00000000 00000003 00000058
    [  206.980051] bfa0: 80101204 80101000 00000000 00000000 fee1dead 28121969 01234567 00000000
    [  206.988237] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000
    [  206.996425] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 60000030 fee1dead 00000000 00000000
    [  207.004622] [<805cd4b0>] (ci_hdrc_remove_device) from [<805d62cc>] (ci_hdrc_imx_remove+0x20/0xe8)
    [  207.013509] [<805d62cc>] (ci_hdrc_imx_remove) from [<8049a490>] (device_shutdown+0x16c/0x218)
    [  207.022050] [<8049a490>] (device_shutdown) from [<80148b08>] (kernel_restart+0xc/0x50)
    [  207.029980] [<80148b08>] (kernel_restart) from [<80148d8c>] (sys_reboot+0xf4/0x1f0)
    [  207.037648] [<80148d8c>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54)
    [  207.045308] Exception stack(0xa806bfa8 to 0xa806bff0)
    [  207.050368] bfa0:                   00000000 00000000 fee1dead 28121969 01234567 00000000
    [  207.058554] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000
    [  207.066737] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6
    [  207.071799] Code: ebffffa8 e3a00000 e8bd8010 e92d4010 (e5904004)
    [  207.078021] ---[ end trace be47424e3fd46e9f ]---
    [  207.082647] Kernel panic - not syncing: Fatal exception
    [  207.087894] ---[ end Kernel panic - not syncing: Fatal exception ]---

    c) the error path in combination with driver removal causes
       imbalanced calls to the clk_*() and pm_()* APIs

a) happens because the original intended return value is
   overwritten (with 0) by the return code of
   regulator_disable() in ci_hdrc_imx_probe()'s error path
b) happens because ci_pdev is -EPROBE_DEFER, which causes
   ci_hdrc_remove_device() to OOPS

Fix a) by being more careful in ci_hdrc_imx_probe()'s error
path and not overwriting the real error code

Fix b) by calling the respective cleanup functions during
remove only when needed (when ci_pdev != NULL, i.e. when
everything was initialised correctly). This also has the
side effect of not causing imbalanced clk_*() and pm_*()
API calls as part of the error code path.

Fixes: 7c8e8909

 ("usb: chipidea: imx: add HSIC support")
Signed-off-by: André Draszik <git@andred.net>
Cc: stable <stable@vger.kernel.org>
CC: Peter Chen <Peter.Chen@nxp.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: linux-usb@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20190810150758.17694-1-git@andred.net


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On the Gemini SoC the FOTG2 stalls after port reset
so restart the HCD after each port reset.

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A few checks checked for the size of the pointer to a structure
instead of the structure itself. Copy & paste issue presumably.

Fixes: e4c6fb77

 ("usbnet: move the CDC parser into USB core")
Cc: stable <stable@vger.kernel.org>
Reported-by:  <syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

destroy() will decrement the refcount on the interface, so that
it needs to be taken so early that it never undercounts.

Fixes: 7fb57a01

 ("USB: cdc-acm: Fix potential deadlock (lockdep warning)")
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by:  <syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a VID:PID for the BroadMobi BM818 M.2 card

T:  Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=2060 Rev=00.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: Bob Ham <bob.ham@puri.sm>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: stable <stable@vger.kernel.org>
[ johan: use USB_DEVICE_INTERFACE_CLASS() ]
Signed-off-by: Johan Hovold <johan@kernel.org>

On Motorola Mapphone devices such as Droid 4 there are five USB ports
that do not use the same layout as Gobi 1K/2K/etc devices listed in
qcserial.c. So we should use qcaux.c or option.c as noted by
Dan Williams <dan.j.williams@intel.com>.

As the Motorola USB serial ports have an interrupt endpoint as shown
with lsusb -v, we should use option.c instead of qcaux.c as pointed out
by Johan Hovold <johan@kernel.org>.

The ff/ff/ff interfaces seem to always be UARTs on Motorola devices.
For the other interfaces, class 0x0a (CDC Data) should not in general
be added as they are typically part of a multi-interface function as
noted earlier by Bjørn Mork <bjorn@mork.no>.

However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a
class is only used for flashing the modem firmware, and there are no
other interfaces. So I've added that too with more details below as it
works just fine.

The ttyUSB ports on Droid 4 are:

ttyUSB0 DIAG, CQDM-capable
ttyUSB1 MUX or NMEA, no response
ttyUSB2 MUX or NMEA, no response
ttyUSB3 TCMD
ttyUSB4 AT-capable

The ttyUSB0 is detected as QCDM capable by ModemManager. I think
it's only used for debugging with ModemManager --debug for sending
custom AT commands though. ModemManager already can manage data
connection using the USB QMI ports that are already handled by the
qmi_wwan.c driver.

To enable the MUX or NMEA ports, it seems that something needs to be
done additionally to enable them, maybe via the DIAG or TCMD port.
It might be just a NVRAM setting somewhere, but I have no idea what
NVRAM settings may need changing for that.

The TCMD port seems to be a Motorola custom protocol for testing
the modem and to configure it's NVRAM and seems to work just fine
based on a quick test with a minimal tcmdrw tool I wrote.

The voice modem AT-capable port seems to provide only partial
support, and no PM support compared to the TS 27.010 based UART
wired directly to the modem.

The UARTs added with this change are the same product IDs as the
Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't
have any mdm9600 based devices, so I have only tested these on
mdm6600 based droid 4.

Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android
Linux kernel driver moto_flashqsc.c just seems to change the
port->bulk_out_size to 8K from the default. And is only used for
flashing the modem firmware it seems.

I've verified that flashing the modem with signed firmware works just
fine with the option driver after manually toggling the GPIO pins, so
I've added droid 4 modem flashing mode to the option driver. I've not
added the other devices listed in moto_flashqsc.c in case they really
need different port->bulk_out_size. Those can be added as they get
tested to work for flashing the modem.

After this patch the output of /sys/kernel/debug/usb/devices has
the following for normal 22b8:2a70 mode including the related qmi_wwan
interfaces:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=2a70 Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=8b(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8c(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E:  Ad=8d(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=09(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

In 22b8:900e "qc_dload" mode the device shows up as:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=900e Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

And in 22b8:4281 "ram_downloader" mode the device shows up as:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22b8 ProdID=4281 Rev= 0.00
S:  Manufacturer=Motorola, Incorporated
S:  Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Cc: Bjørn Mork <bjorn@mork.no>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Lars Melin <larsm17@gmail.com>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

drm-fixes-5.3-2019-08-14:

amdgpu:
- Use kvalloc for dc_state to avoid allocation
  failures in some cases.
- Fix gfx9 soft recovery

scheduler:
- Fix a race condition when destroying entities

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815024919.3434-1-alexander.deucher@amd.com

I -thought- I had fixed this entirely, but it looks like that I didn't
test this thoroughly enough as we apparently still make one big mistake
with nv50_msto_atomic_check() - we don't handle the following scenario:

* CRTC #1 has n VCPI allocated to it, is attached to connector DP-4
  which is attached to encoder #1. enabled=y active=n
* CRTC #1 is changed from DP-4 to DP-5, causing:
  * DP-4 crtc=#1→NULL (VCPI n→0)
  * DP-5 crtc=NULL→#1
  * CRTC #1 steals encoder #1 back from DP-4 and gives it to DP-5
  * CRTC #1 maintains the same mode as before, just with a different
    connector
* mode_changed=n connectors_changed=y
  (we _SHOULD_ do VCPI 0→n here, but don't)

Once the above scenario is repeated once, we'll attempt freeing VCPI
from the connector that we didn't allocate due to the connectors
changing, but the mode staying the same. Sigh.

Since nv50_msto_atomic_check() has broken a few times now, let's rethink
things a bit to be more careful: limit both VCPI/PBN allocations to
mode_changed || connectors_changed, since neither VCPI or PBN should
ever need to change outside of routing and mode changes.

Changes since v1:
* Fix accidental reversal of clock and bpp arguments in
  drm_dp_calc_pbn_mode() - William Lewis

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Bohdan Milar <bmilar@redhat.com>
Tested-by: Bohdan Milar <bmilar@redhat.com>
Fixes: 232c9eec ("drm/nouveau: Use atomic VCPI helpers for MST")
References: 412e85b6

 ("drm/nouveau: Only release VCPI slots on mode changes")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <stable@vger.kernel.org> # v5.1+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809005307.18391-1-lyude@redhat.com

There is another thread still access standard VGA I/O while loading drm driver.
Disable standard VGA I/O decode to avoid this issue.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.com

Diverged from what the code does with commit 530210c7

 ("of/irq: Replace
of_irq with of_phandle_args").

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>