Register pfn_is_ram helper speed up reading /proc/vmcore in the kdump
kernel. See commit message of 997c136f

 ("fs/proc/vmcore.c: add hook
to read_from_oldmem() to check for non-ram pages") for details.

It makes use of a new hvmop HVMOP_get_mem_type which was introduced in
xen 4.2 (23298:26413986e6e0) and backported to 4.1.1.

The new function is currently only enabled for reading /proc/vmcore.
Later it will be used also for the kexec kernel. Since that requires
more changes in the generic kernel make it static for the time being.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED.  If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.

So, treat an unexpected backend CLOSED state the same as CLOSING.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Since commit commit 4c071ee5

 ("arm:
initial Xen support") PV on HVM guests can be xen_initial_domain.
However PV on HVM guests might have an unitialized xen_start_info, so
check before accessing its fields.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

xen_init_IRQ should be marked __init because it calls other functions
marked __init and is always called by functions marked __init (on both
x86 and arm).

Also remove the unused EXPORT_SYMBOL_GPL(xen_init_IRQ).

Both changes were introduced by "xen/arm: receive Xen events on ARM".

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We need to add $(dom0-y) to obj-$(CONFIG_XEN_DOM0) after dom0-y is
defined otherwise we end up adding nothing.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Merge branch 'xenarm-for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm into stable/for-linus-3.7

* 'xenarm-for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm

:
  arm: introduce a DTS for Xen unprivileged virtual machines
  MAINTAINERS: add myself as Xen ARM maintainer
  xen/arm: compile netback
  xen/arm: compile blkfront and blkback
  xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree
  xen/arm: receive Xen events on ARM
  xen/arm: initialize grant_table on ARM
  xen/arm: get privilege status
  xen/arm: introduce CONFIG_XEN on ARM
  xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM
  xen/arm: Introduce xen_ulong_t for unsigned long
  xen/arm: Xen detection and shared_info page mapping
  docs: Xen ARM DT bindings
  xen/arm: empty implementation of grant_table arch specific functions
  xen/arm: sync_bitops
  xen/arm: page.h definitions
  xen/arm: hypercalls
  arm: initial Xen support

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When we do an FLR, or D0->D3_hot we may lose the BARs as the
device has turned itself off (and on). This means the device cannot
function unless the pci_restore_state is called - which it is
when the PCI device is unbound from the Xen PCI backend driver.
For PV guests it ends up calling pci_enable_device / pci_enable_msi[x]
which does the proper steps

That however is not happening if a HVM guest is run as QEMU
deals with PCI configuration space. QEMU also requires that the
device be "parked"  under the ownership of a pci-stub driver to
guarantee that the PCI device is not being used. Hence we
follow the same incantation as pci_reset_function does - by
doing an FLR, then restoring the PCI configuration space.

The result of this patch is that when you run lspci, you get
now this:

-       Region 0: [virtual] Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K]
-       Region 1: [virtual] Memory at fe800000 (32-bit, non-prefetchable) [size=512K]
+       Region 0: Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K]
+       Region 1: Memory at fe800000 (32-bit, non-prefetchable) [size=512K]
        Region 2: I/O ports at c000 [size=32]
-       Region 3: [virtual] Memory at fe8e0000 (32-bit, non-prefetchable) [size=16K]
+       Region 3: Memory at fe8e0000 (32-bit, non-prefetchable) [size=16K]

The [virtual] means that lspci read those entries from SysFS but when
it read them from the device it got a different value (0xfffffff).

CC: stable@vger.kernel.org #only for 3.5, 3.6
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

As the function calls pcistub_device_get() before returning non-NULL,
its callers need to take care of calling pcistub_device_put() on
(mostly, but not exclusively) error paths.

Otoh, the function already guarantees that the 'dev' member is non-NULL
upon successful return, so callers do not need to check for this a
second time.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Given that the xenvm machine is based on vexpress but with an extremely
limited selection of peripherals (the guest is supposed to use virtual
devices instead), add "xen,xenvm" to the list of compatible machines in
mach-vexpress.


Changes in v3:

- add comments to mark fields that are likely to be changed by the
hypervisor.


Changes in v2:

- remove include skeleton;
- use #address-cells = <2> and #size-cells = <2>;
- remove the debug bootargs;
- use memory@80000000 instead of memory;
- remove the ranges and interrupt-map from the motherboard node;
- set the machine compatible to "xen,xenvm-4.2", "xen,xenvm";
- rename the dts file to xenvm-4.2.dts;
- add "xen,xenvm" to the list of compatible DT strings to mach-vexpress.


Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pawel Moll <pawel.moll@arm.com> (v2m changes)

In order to add xen EFI frambebuffer video support, it is required to add
xen-efi's new video type (XEN_VGATYPE_EFI_LFB) case and handle it in the
function xen_init_vga and set the video type to VIDEO_TYPE_EFI to enable
efi video mode.

The original patch from which this was broken out from:
 http://marc.info/?i=4E099AA6020000780004A4C6@nat28.tlf.novell.com



Signed-off-by: Jan Beulich <JBeulich@novell.com>
Signed-off-by: Tang Liang <liang.tang@oracle.com>
[v2: The original author is Jan Beulich and Liang Tang ported it to upstream]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The xen c/s 25873 allows the hypervisor to retrieve the NUMLOCK flag.
With this patch, the Linux kernel can get the state according to the
data in the BIOS.

Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* stable/late-swiotlb.v3.3:
  xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer.
  xen/swiotlb: Remove functions not needed anymore.
  xen/pcifront: Use Xen-SWIOTLB when initting if required.
  xen/swiotlb: For early initialization, return zero on success.
  xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used.
  xen/swiotlb: Move the error strings to its own function.
  xen/swiotlb: Move the nr_tbl determination in its own function.
  swiotlb: add the late swiotlb initialization function with iotlb memory
  xen/swiotlb: With more than 4GB on 64-bit, disable the native SWIOTLB.
  xen/swiotlb: Simplify the logic.

Conflicts:
	arch/x86/xen/pci-swiotlb-xen.c

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Since Xen-4.2, hvm domains may have portions of their memory paged out. When a
foreign domain (such as dom0) attempts to map these frames, the map will
initially fail. The hypervisor returns a suitable errno, and kicks an
asynchronous page-in operation carried out by a helper. The foreign domain is
expected to retry the mapping operation until it eventually succeeds. The
foreign domain is not put to sleep because itself could be the one running the
pager assist (typical scenario for dom0).

This patch adds support for this mechanism for backend drivers using grant
mapping and copying operations. Specifically, this covers the blkback and
gntdev drivers (which map foreign grants), and the netback driver (which copies
foreign grants).

* Add a retry method for grants that fail with GNTST_eagain (i.e. because the
  target foreign frame is paged out).
* Insert hooks with appropriate wrappers in the aforementioned drivers.

The retry loop is only invoked if the grant operation status is GNTST_eagain.
It guarantees to leave a new status code different from GNTST_eagain. Any other
status code results in identical code execution as before.

The retry loop performs 256 attempts with increasing time intervals through a
32 second period. It uses msleep to yield while waiting for the next retry.

V2 after feedback from David Vrabel:
* Explicit MAX_DELAY instead of wrap-around delay into zero
* Abstract GNTST_eagain check into core grant table code for netback module.

V3 after feedback from Ian Campbell:
* Add placeholder in array of grant table error descriptions for unrelated
  error code we jump over.
* Eliminate single map and retry macro in favor of a generic batch flavor.
* Some renaming.
* Bury most implementation in grant_table.c, cleaner interface.

V4 rebased on top of sync of Xen grant table interface headers.

Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[v5: Fixed whitespace issues]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Particularly for hiding sets of SR-IOV devices, specifying them all
individually is rather cumbersome. Therefore, allow function and slot
numbers to be replaced by a wildcard character ('*').

Unfortunately this gets complicated by the in-kernel sscanf()
implementation not being really standard conformant - matching of
plain text tails cannot be checked by the caller (a patch to overcome
this will be sent shortly, and a follow-up patch for simplifying the
code is planned to be sent when that fixed went upstream).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

arch/x86/xen/pci-swiotlb-xen.c:96:1: warning: Using plain integer as NULL pointer
arch/x86/xen/pci-swiotlb-xen.c:96:1: warning: Using plain integer as NULL pointer

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Sparse warns us off:
drivers/xen/swiotlb-xen.c:506:1: warning: symbol 'xen_swiotlb_map_sg' was not declared. Should it be static?
drivers/xen/swiotlb-xen.c:534:1: warning: symbol 'xen_swiotlb_unmap_sg' was not declared. Should it be static?

and it looks like we do not need this function at all.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We piggyback on "xen/swiotlb: Use the swiotlb_late_init_with_tbl to init
Xen-SWIOTLB late when PV PCI is used." functionality to start up
the Xen-SWIOTLB if we are hot-plugged. This allows us to bypass
the need to supply 'iommu=soft' on the Linux command line (mostly).
With this patch, if a user forgot 'iommu=soft' on the command line,
and hotplug a PCI device they will get:

pcifront pci-0: Installing PCI frontend
Warning: only able to allocate 4 MB for software IO TLB
software IO TLB [mem 0x2a000000-0x2a3fffff] (4MB) mapped at [ffff88002a000000-ffff88002a3fffff]
pcifront pci-0: Creating PCI Frontend Bus 0000:00
pcifront pci-0: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:00:00.0: reg 10: [mem 0xfe5c0000-0xfe5dffff]
pci 0000:00:00.0: reg 14: [mem 0xfe500000-0xfe57ffff]
pci 0000:00:00.0: reg 18: [io  0xe000-0xe01f]
pci 0000:00:00.0: reg 1c: [mem 0xfe5e0000-0xfe5e3fff]
pcifront pci-0: claiming resource 0000:00:00.0/0
pcifront pci-0: claiming resource 0000:00:00.0/1
pcifront pci-0: claiming resource 0000:00:00.0/2
pcifront pci-0: claiming resource 0000:00:00.0/3
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:00.0: Disabling ASPM L0s L1
e1000e 0000:00:00.0: enabling device (0000 -> 0002)
e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34
e1000e 0000:00:00.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1b:21:ab:c6:13
e1000e 0000:00:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:00.0: eth0: MAC: 3, PHY: 8, PBA No: E46981-005

The "Warning only" will go away if one supplies 'iommu=soft' instead
as we have a higher chance of being able to allocate large swaths of
memory.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If everything is setup properly we would return -ENOMEM since
rc by default is set to that value. Lets not do that and return
a proper return code.

Note: The reason the early code needs this special treatment
is that it SWIOTLB library call does not return anything (and
had it failed it would call panic()) - but our function does.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

With this patch we provide the functionality to initialize the
Xen-SWIOTLB late in the bootup cycle - specifically for
Xen PCI-frontend. We still will work if the user had
supplied 'iommu=soft' on the Linux command line.

Note: We cannot depend on after_bootmem to automatically
determine whether this is early or not. This is because
when PCI IOMMUs are initialized it is after after_bootmem but
before a lot of "other" subsystems are initialized.

CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
[v1: Fix smatch warnings]
[v2: Added check for xen_swiotlb]
[v3: Rebased with new xen-swiotlb changes]
[v4: squashed xen/swiotlb: Depending on after_bootmem is not correct in]
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

That way we can more easily reuse those errors when using the
late SWIOTLB init.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Moving the function out of the way to prepare for the late
SWIOTLB init.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

bind_evtchn_to_irqhandler can legitimately return 0 (irq 0): it is not
an error.

If Linux is running as an HVM domain and is running as Dom0, use
xenstored_local_init to initialize the xenstore page and event channel.

Changes in v4:
- do not xs_reset_watches on dom0.

Changes in v2:
- refactor xenbus_init.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
[v5: Fixed case switch indentations]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Arnd Bergmann <arnd@arndb.de>

Adds GNTST_address_too_big and GNTST_eagain.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* stable/128gb.v5.1:
  xen/mmu: If the revector fails, don't attempt to revector anything else.
  xen/p2m: When revectoring deal with holes in the P2M array.
  xen/mmu: Release just the MFN list, not MFN list and part of pagetables.
  xen/mmu: Remove from __ka space PMD entries for pagetables.
  xen/mmu: Copy and revector the P2M tree.
  xen/p2m: Add logic to revector a P2M tree to use __va leafs.
  xen/mmu: Recycle the Xen provided L4, L3, and L2 pages
  xen/mmu: For 64-bit do not call xen_map_identity_early
  xen/mmu: use copy_page instead of memcpy.
  xen/mmu: Provide comments describing the _ka and _va aliasing issue
  xen/mmu: The xen_setup_kernel_pagetable doesn't need to return anything.
  Revert "xen/x86: Workaround 64-bit hypervisor and 32-bit initial domain." and "xen/x86: Use memblock_reserve for sensitive areas."
  xen/x86: Workaround 64-bit hypervisor and 32-bit initial domain.
  xen/x86: Use memblock_reserve for sensitive areas.
  xen/p2m: Fix the comment describing the P2M tree.

Conflicts:
	arch/x86/xen/mmu.c

The pagetable_init is the old xen_pagetable_setup_done and xen_pagetable_setup_start
rolled in one.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Merge branch 'x86/platform' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into stable/for-linus-3.7

* 'x86/platform' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (9690 commits)
  x86: Document x86_init.paging.pagetable_init()
  x86: xen: Cleanup and remove x86_init.paging.pagetable_setup_done()
  x86: Move paging_init() call to x86_init.paging.pagetable_init()
  x86: Rename pagetable_setup_start() to pagetable_init()
  x86: Remove base argument from x86_init.paging.pagetable_setup_start
  Linux 3.6-rc5
  HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured
  Remove user-triggerable BUG from mpol_to_str
  xen/pciback: Fix proper FLR steps.
  uml: fix compile error in deliver_alarm()
  dj: memory scribble in logi_dj
  Fix order of arguments to compat_put_time[spec|val]
  xen: Use correct masking in xen_swiotlb_alloc_coherent.
  xen: fix logical error in tlb flushing
  xen/p2m: Fix one-off error in checking the P2M tree directory.
  powerpc: Don't use __put_user() in patch_instruction
  powerpc: Make sure IPI handlers see data written by IPI senders
  powerpc: Restore correct DSCR in context switch
  powerpc: Fix DSCR inheritance in copy_thread()
  powerpc: Keep thread.dscr and thread.dscr_inherit in sync
  ...

Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Acked-by:  <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-6-git-send-email-attilio.rao@citrix.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

At this stage x86_init.paging.pagetable_setup_done is only used in the
XEN case. Move its content in the x86_init.paging.pagetable_init setup
function and remove the now unused x86_init.paging.pagetable_setup_done
remaining infrastructure.

Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Acked-by:  <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-5-git-send-email-attilio.rao@citrix.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Move the paging_init() call to the platform specific pagetable_init()
function, so we can get rid of the extra pagetable_setup_done()
function pointer.

Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Acked-by:  <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-4-git-send-email-attilio.rao@citrix.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

In preparation for unifying the pagetable_setup_start() and
pagetable_setup_done() setup functions, rename appropriately all the
infrastructure related to pagetable_setup_start().

Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Ackedd-by:  <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-3-git-send-email-attilio.rao@citrix.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

We either use swapper_pg_dir or the argument is unused. Preparatory
patch to simplify platform pagetable setup further.

Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Ackedb-by:  <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-2-git-send-email-attilio.rao@citrix.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

__copy_to_user() returns the number of bytes remaining to be copied but
we want to return a negative error code here.

Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Pull DMA-mapping fixes from Marek Szyprowski:
 "Another set of fixes for ARM dma-mapping subsystem.

  Commit e9da6e99 replaced custom consistent buffer remapping code
  with generic vmalloc areas.  It however introduced some regressions
  caused by limited support for allocations in atomic context.  This
  series contains fixes for those regressions.

  For some subplatforms the default, pre-allocated pool for atomic
  allocations turned out to be too small, so a function for setting its
  size has been added.

  Another set of patches adds support for atomic allocations to
  IOMMU-aware DMA-mapping implementation.

  The last part of this pull request contains two fixes for Contiguous
  Memory Allocator, which relax too strict requirements."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC
  ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()
  ARM: dma-mapping: Refactor out to introduce __in_atomic_pool
  ARM: dma-mapping: atomic_pool with struct page **pages
  ARM: Kirkwood: increase atomic coherent pool size
  ARM: DMA-Mapping: print warning when atomic coherent allocation fails
  ARM: DMA-Mapping: add function for setting coherent pool size from platform code
  ARM: relax conditions required for enabling Contiguous Memory Allocator
  mm: cma: fix alignment requirements for contiguous regions

Pull input subsystem updates from Dmitry Torokhov.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add support for EMR on Cintiq 24HD touch
  Input: i8042 - add Gigabyte T1005 series netbooks to noloop table
  Input: imx_keypad - reset the hardware before enabling
  Input: edt-ft5x06 - fix build error when compiling wthout CONFIG_DEBUG_FS

Pull HID updates from Jiri Kosina:
 "It contains a fix for Eaton Ellipse MAX UPS from Alan Stern,
  performance improvement (not processing debug data if noone is
  interested), by Henrik Rydberg, and allowing tpkbd-driven devices to
  work even with generic driver in a crippled mode, by Andres Freund."

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured
  HID: Only dump input if someone is listening
  HID: add NOGET quirk for Eaton Ellipse MAX UPS

c1dcad2d

 added a new driver configured by
HID_LENOVO_TPKBD but made the hid_have_special_driver entry non-optional which
lead to a recognized but non-working device if the new driver wasn't
configured (which is the correct default).

Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge tag 'stable/for-linus-3.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 * Fix for TLB flushing introduced in v3.6
 * Fix Xen-SWIOTLB not using proper DMA mask - device had 64bit but
   in a 32-bit kernel we need to allocate for coherent pages from a
   32-bit pool.
 * When trying to re-use P2M nodes we had a one-off error and triggered
   a BUG_ON check with specific CONFIG_ option.
 * When doing FLR in Xen-PCI-backend we would first do FLR then save the
   PCI configuration space. We needed to do it the other way around.

* tag 'stable/for-linus-3.6-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pciback: Fix proper FLR steps.
  xen: Use correct masking in xen_swiotlb_alloc_coherent.
  xen: fix logical error in tlb flushing
  xen/p2m: Fix one-off error in checking the P2M tree directory.

Pull PCI updates from Bjorn Helgaas:
 "Power management
    - PCI/PM: Enable D3/D3cold by default for most devices
    - PCI/PM: Keep parent bridge active when probing device
    - PCI/PM: Fix config reg access for D3cold and bridge suspending
    - PCI/PM: Add ABI document for sysfs file d3cold_allowed
  Core
    - PCI: Don't print anything while decoding is disabled"

* tag '3.6-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Don't print anything while decoding is disabled
  PCI/PM: Add ABI document for sysfs file d3cold_allowed
  PCI/PM: Fix config reg access for D3cold and bridge suspending
  PCI/PM: Keep parent bridge active when probing device
  PCI/PM: Enable D3/D3cold by default for most devices

Copy back of per-slot error codes is only necessary for V2. V1 does not provide
an error array, so copyback will unconditionally set the global rc to EFAULT.
Only copyback for V2.

Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>