- Mar 27, 2020
-
-
Antoine Tenart authored
This patch adds a reference to MACsec ops to the net_device structure, allowing net device drivers to implement offloading operations for MACsec. Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch introduce a new netdev feature, which will be used by drivers to state they can perform MACsec transformations in hardware. The patchset was gathered by Mark, macsec functinality itself was implemented by Dmitry, Mark and Pavel Belous. Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugene Syromiatnikov authored
BIT() macro definition is internal to the Linux kernel and is not to be used in UAPI headers; replace its usage with the _BITUL() macro that is already used elsewhere in the header. Fixes: 9c66d156 ("taprio: Add support for hardware offloading") Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Acked-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maciej Żenczykowski authored
This is trivial since we already have support for the entirely identical (from the kernel's point of view) RDNSS, DNSSL, etc. that also contain opaque data that needs to be passed down to userspace for further processing. As specified in draft-ietf-6man-ra-pref64-09 (while it is still a draft, it is purely waiting on the RFC Editor for cleanups and publishing): PREF64 option contains lifetime and a (up to) 96-bit IPv6 prefix. The 8-bit identifier of the option type as assigned by the IANA is 38. Since we lack DNS64/NAT64/CLAT support in kernel at the moment, thus this option should also be passed on to userland. See: https://tools.ietf.org/html/draft-ietf-6man-ra-pref64-09 https://www.iana.org/assignments/icmpv6-parameters/icmpv6-parameters.xhtml#icmpv6-parameters-5 Cc: Erik Kline <ek@google.com> Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Michael Haro <mharo@google.com> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Acked-By:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Grygorii Strashko says: ==================== net: ethernet: ti: add networking support for k3 am65x/j721e soc This v6 series adds basic networking support support TI K3 AM654x/J721E SoC which have integrated Gigabit Ethernet MAC (Media Access Controller) into device MCU domain and named MCU_CPSW0 (CPSW2G NUSS). Formally TRMs refer CPSW2G NUSS as two-port Gigabit Ethernet Switch subsystem with port 0 being the CPPI DMA host port and port 1 being the external Ethernet port, but for 1 external port device it's just Port 0 <-> ALE <-> Port 1 and it's rather device with HW filtering capabilities then actually switching device. It's expected to have similar devices, but with more external ports. The new Host port 0 Communications Port Programming Interface (CPPI5) is operating by TI AM654x/J721E NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller [1]. The CPSW2G contains below modules for which existing code is re-used: - MAC SL: cpsw_sl.c - Address Lookup Engine (ALE): cpsw_ale.c, basically compatible with K2 66AK2E/G - Management Data Input/Output interface (MDIO): davinci_mdio.c, fully compatible with TI AM3/4/5 devices Basic features supported by CPSW2G NUSS driver: - VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on ingress, Auto VLAN removal on egress and auto pad to minimum frame size. - multicast filtering - promisc mode - TX multiq support in Round Robin or Fixed priority modes - RX checksum offload for non-fragmented IPv4/IPv6 TCP/UDP packets - TX checksum offload support for IPv4/IPv6 TCP/UDP packets (J721E only). Features under development: - Support for IEEE 1588 Clock Synchronization. The CPSW2G NUSS includes new version of Common Platform Time Sync (CPTS) - tc-mqprio: priority level Quality Of Service (QOS) support (802.1p) - tc-cbs: Support for Audio/Video Bridging (P802.1Qav/D6.0) HW shapers - tc-taprio: IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic - frame preemption: IEEE P902.3br/D2.0 Interspersing Express Traffic, 802.1Qbu - extended ALE features: classifier/policers, auto-aging Patches 1-6 are intended for netdev, Patches 7-11 are intended for K3 Platform tree and provided here for testing purposes. Changes in v6: - fixed comments from Rob Herring <robh@kernel.org> and added his Reviewed-by. - added Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Changes in v5: - renamed files k3-udma-desc-pool.* k3-udma-desc-pool to k3-cppi-desc-pool.*, and API to k3_cppi_desc_pool_* as requested by Peter Ujfalusi <peter.ujfalusi@ti.com> - fixed copy-paste err in am65_cpsw_nuss_ndo_slave_set_rx_mode() which blocked recieving of mcast frames. - added Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Changes in v4: - fixed minor comments from Jakub Kicinski <kuba@kernel.org> - dependencies resolved: required phy-rmii-sel changes [2] queued for merge except one [3] which is included in this series with Kishon's ask. Changes in v3: - add ARM64 defconfig changes for testing purposes - fixed DT yaml definition - fixed comments from Jakub Kicinski <kuba@kernel.org> Changes in v2: - fixed DT yaml definition - fixed comments from David Miller v5: https://patchwork.ozlabs.org/cover/1258295/ v4: https://patchwork.ozlabs.org/cover/1256092/ v3: https://patchwork.ozlabs.org/cover/1254568/ v2: https://patchwork.ozlabs.org/cover/1250674/ v1: https://lwn.net/Articles/813087/ TRMs: AM654: http://www.ti.com/lit/ug/spruid7e/spruid7e.pdf J721E: http://www.ti.com/lit/ug/spruil1a/spruil1a.pdf Preliminary documentation can be found at: http://software-dl.ti.com/processor-sdk-linux/esd/docs/latest/linux/Foundational_Components/Kernel/Kernel_Drivers/Network/K3_CPSW2g.html [1] https://lwn.net/Articles/808030/ [2] https://lkml.org/lkml/2020/2/22/100 [3] https://lkml.org/lkml/2020/3/3/724 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Enable TI K3 AM654x/J721E DMA and networking options. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The TI J721E EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI j721e SoC MCU Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Add DT node for The TI J721E MCU SoC Gigabit Ethernet subsystem (MCU CPSW NUSS). Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
AM654 EVM base board has TI DP83867 PHY connected to external CPSW NUSS Port 1 in rgmii-rxid mode. Hence, add pinmux and Ethernet PHY configuration for TI am654 SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Add DT node for the TI AM65x SoC Gigabit Ethernet two ports Switch subsystem (CPSW NUSS). Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The TI AM65x/J721E SoCs Gigabit Ethernet Switch subsystem (CPSW2G NUSS) has two ports - One Ethernet port (port 1) with selectable RGMII and RMII interfaces and an internal Communications Port Programming Interface (CPPI) port (Host port 0) and with ALE in between. It also contains - Management Data Input/Output (MDIO) interface for physical layer device (PHY) management; - Updated Address Lookup Engine (ALE) module; - (TBD) New version of Common platform time sync (CPTS) module. On the TI am65x/J721E SoCs CPSW NUSS Ethernet subsystem into device MCU domain named MCU_CPSW0. Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels and one RX channels operating by TI am654 NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller. Introduced driver provides standard Linux net_device to user space and supports: - ifconfig up/down - MAC address configuration - ethtool operation: --driver --change --register-dump --negotiate phy --statistics --set-eee phy --show-ring --show-channels --set-channels - net_device ioctl mii-control - promisc mode - rx checksum offload for non-fragmented IPv4/IPv6 TCP/UDP packets. The CPSW NUSS can verify IPv4/IPv6 TCP/UDP packets checksum and fills csum information for each packet in psdata[2] word: - BIT(16) CHECKSUM_ERROR - indicates csum error - BIT(17) FRAGMENT - indicates fragmented packet - BIT(18) TCP_UDP_N - Indicates TCP packet was detected - BIT(19) IPV6_VALID, BIT(20) IPV4_VALID - indicates IPv6/IPv4 packet - BIT(15, 0) CHECKSUM_ADD - This is the value that was summed during the checksum computation. This value is FFFFh for non fragmented IPV4/6 UDP/TCP packets with no checksum error. RX csum offload can be disabled: ethtool -K <dev> rx-checksum on|off - tx checksum offload support for IPv4/IPv6 TCP/UDP packets (J721E only). TX csum HW offload can be enabled/disabled: ethtool -K <dev> tx-checksum-ip-generic on|off - multiq and switch between round robin/prio modes for cppi tx queues by using Netdev private flag "p0-rx-ptype-rrobin" to switch between Round Robin and Fixed priority modes: # ethtool --show-priv-flags eth0 Private flags for eth0: p0-rx-ptype-rrobin: on # ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off Number of TX DMA channels can be changed using "ethtool -L eth0 tx <N>". - GRO support: the napi_gro_receive() and napi_complete_done() are used. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Document device tree bindings for The TI AM654x/J721E SoC Gigabit Ethernet MAC (Media Access Controller - CPSW2G NUSS). The CPSW NUSS provides Ethernet packet communication for the device. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Rob Herring <robh@kernel.org> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Add support for default thread configuration for AM65x CPSW NUSS ALE to allow route all ingress packets to one default RX UDMA flow. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The new CPSW ALE version, available on TI K3 AM654/J721E SoCs family, allows to switch any external port to MAC only mode. When MAC only mode enabled this port be treated like a MAC port for the host. All traffic received is only sent to the host. The host must direct traffic to this port as the lookup engine will not send traffic to the ports with the p0_maconly bit set and the p0_no_learn also set. If p0_maconly bit is set and the p0_no_learn is not set, the host can send non-directed packets that can be sent to the destination of a MacOnly port. It is also possible that The host can broadcast to all ports including MacOnly ports in this mode. This patch add ALE supprt for MAC only mode. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS the unregistered multicast packets are still can be received with promisc and allmulti disabled. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. ALE VLAN entry:UNREG_MCAST_FLOOD_INDEX -> ALE_VLAN_MASK_MUXx ALE VLAN entry:REG_MCAST_FLOOD_INDEX -> ALE_VLAN_MASK_MUXy The commit b361da83 ("net: netcp: ale: add proper ale entry mask bits for netcp switch ALE") update ALE code to support such ALE entries, it is always used ALE_VLAN_MASK_MUX0_REG index in ALE VLAN entry for unreg mcast packets mask configuration, which is read-only, at least for AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS. As result unreg mcast packets are allowed always. Hence, update ALE code to use ALE_VLAN_MASK_MUX1_REG index for ALE VLAN entries to configure unreg mcast port mask. Fixes: b361da83 ("net: netcp: ale: add proper ale entry mask bits for netcp switch ALE") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The phy-gmii-sel can be only auto selected in Kconfig and now the pretty complex Kconfig dependencies are defined for phy-gmii-sel driver, which also need to be updated every time phy-gmii-sel is re-used for any new networking driver. Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all dependencies and from networking drivers and rely on using 'imply PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Kishon Vijay Abraham I <kishon@ti.com> Tested-by:
Murali Karicheri <m-karicheri2@ti.com> Tested-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Guillaume Nault says: ==================== cls_flower: Use extack in fl_set_key() Add missing extack messages in fl_set_key(), so that users can get more meaningfull error messages when netlink attributes are rejected. Patch 1 also extends extack in tcf_change_indev() (in pkt_cls.h) since this function is used by fl_set_key(). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Pass extack down to fl_set_key_flags() and set message on error. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Pass extack down to fl_set_key_port_range() and set message on error. Both the min and max ports would qualify as invalid attributes here. Report the min one as invalid, as it's probably what makes the most sense from a user point of view. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Pass extack down to fl_set_key_mpls() and set message on error. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Add an error message when device wasn't found. While there, also set the bad attribute's offset in extack. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tobias Waldekranz says: ==================== net: phy: marvell usb to mdio controller Support for an MDIO controller present on development boards for Marvell switches from the Link Street (88E6xxx) family. v3->v4: - Remove unnecessary dependency on OF_MDIO. v2->v3: - Rename driver smi2usb -> mvusb. - Clean up unused USB references. v1->v2: - Reverse christmas tree ordering of local variables. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Waldekranz authored
An MDIO controller present on development boards for Marvell switches from the Link Street (88E6xxx) family. Using this module, you can use the following setup as a development platform for switchdev and DSA related work. .-------. .-----------------. | USB----USB | | SoC | | 88E6390X-DB ETH1-10 | ETH----ETH0 | '-------' '-----------------' Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Waldekranz authored
Describe how the USB to MDIO controller can optionally use device tree bindings to reference attached devices such as switches. Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
If we have scenarios like mdiobus_register() -> loads PHY driver module(s) -> registers PHY driver(s) -> may schedule async probe phydev = mdiobus_get_phy() <phydev action involving PHY driver> or phydev = phy_device_create() -> loads PHY driver module -> registers PHY driver -> may schedule async probe <phydev action involving PHY driver> then we expect the PHY driver to be bound to the phydev when triggering the action. This may not be the case in case of asynchronous probing. Therefore ensure that PHY drivers are probed synchronously. Default still is sync probing, except async probing is explicitly requested. I saw some comments that the intention is to promote async probing for more parallelism in boot process and want to be prepared for the case that the default is changed to async probing. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jacob Keller says: ==================== implement DEVLINK_CMD_REGION_NEW This series adds support for the DEVLINK_CMD_REGION_NEW operation, used to enable userspace requesting a snapshot of a region on demand. This can be useful to enable adding regions for a driver for which there is no trigger to create snapshots. By making this a core part of devlink, there is no need for the drivers to use a separate channel such as debugfs. The primary intent for this kind of region is to expose device information that might be useful for diagnostics and information gathering. The first few patches refactor regions to support a new ops structure for extending the available operations that regions can perform. This includes converting the destructor into an op from a function argument. Next, patches refactor the snapshot id allocation to use an xarray which tracks the number of current snapshots using a given id. This is done so that id lifetime can be determined, and ids can be released when no longer in use. Without this change, snapshot ids remain used forever, until the snapshot_id count rolled over UINT_MAX. Finally, code to enable the previously unused DEVLINK_CMD_REGION_NEW is added. This code enforces that the snapshot id is always provided, unlike previous revisions of this series. Finally, a patch is added to enable using this new command via the .snapshot callback in both netdevsim and the ice driver. For the ice driver, a new "nvm-flash" region is added, which will enable read access to the NVM flash contents. The intention for this is to allow diagnostics tools to gather information about the device. By using a snapshot and gathering the NVM contents all at once, the contents can be atomic. Links to previous discussions: 1st RFC - https://lore.kernel.org/netdev/20200130225913.1671982-1-jacob.e.keller@intel.com/ 2nd RFC - https://lore.kernel.org/netdev/20200214232223.3442651-1-jacob.e.keller@intel.com/ v1 - https://lore.kernel.org/netdev/20200324223445.2077900-1-jacob.e.keller@intel.com/ v2 - https://lore.kernel.org/netdev/20200326035157.2211090-1-jacob.e.keller@intel.com/ Major changes since RFC: * use an xarray for tracking snapshot ids, rather than an IDR * remove support for auto-generated snapshot ids in DEVLINK_CMD_REGION_NEW See each patch for an individual changelog per-patch ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Add a devlink region for exposing the device's Non Volatime Memory flash contents. Support the recently added .snapshot operation, enabling userspace to request a snapshot of the NVM contents via DEVLINK_CMD_REGION_NEW. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Implement the .snapshot region operation for the dummy data region. This enables a region snapshot to be taken upon request via the new DEVLINK_CMD_REGION_SNAPSHOT command. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Implement support for the DEVLINK_CMD_REGION_NEW command for creating snapshots. This new command parallels the existing DEVLINK_CMD_REGION_DEL. In order for DEVLINK_CMD_REGION_NEW to work for a region, the new ".snapshot" operation must be implemented in the region's ops structure. The desired snapshot id must be provided. This helps avoid confusion on the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler. The requested id will be inserted into the xarray tracking the number of snapshots using each id. If this id is already used by another snapshot on any region, an error will be returned. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
The devlink_snapshot_id_get() function returns a snapshot id. The snapshot id is a u32, so there is no way to indicate an error code. A future change is going to possibly add additional cases where this function could fail. Refactor the function to return the snapshot id in an argument, so that it can return zero or an error value. This ensures that snapshot ids cannot be confused with error values, and aids in the future refactor of snapshot id allocation management. Because there is no current way to release previously used snapshot ids, add a simple check ensuring that an error is reported in case the snapshot_id would over flow. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
A future change is going to implement a new devlink command to request a snapshot on demand. As part of this, the logic for handling the snapshot ids will be refactored. To simplify the snapshot id allocation function, move it to a separate function prefixed by `__`. This helper function will assume the lock is held. While no other callers will exist, it simplifies refactoring the logic because there is no need to complicate the function with gotos to handle unlocking on failure. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
The devlink_region_snapshot_create function returns -ENOMEM when the maximum number of snapshots has been reached. This is confusing because it is not an issue of being out of memory. Change this to use -ENOSPC instead. Reported-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
A future change is going to add a new devlink command to request a snapshot on demand. This function will want to call the devlink_region_snapshot_create function while already holding the devlink instance lock. Extract the logic of this function into a static function prefixed by `__` to indicate that it is an internal helper function. Modify the original function to be implemented in terms of the new locked function. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
The function documentation comment for devlink_region_snapshot_create included a literal tab character between 'future analyses' that was difficult to spot as it happened to only display as one space wide. Fix the comment to use a space here instead of a stray tab appearing in the middle of a sentence. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
It does not makes sense that two snapshots for a given region would use different destructors. Simplify snapshot creation by adding a .destructor op for regions. This operation will replace the data_destructor for the snapshot creation, and makes snapshot creation easier. Noticed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Modify the devlink region code in preparation for adding new operations on regions. Create a devlink_region_ops structure, and move the name pointer from within the devlink_region structure into the ops structure (similar to the devlink_health_reporter_ops). This prepares the regions to enable support of additional operations in the future such as requesting snapshots, or accessing the region directly without a snapshot. In order to re-use the constant strings in the mlx4 driver their declaration must be changed to 'const char * const' to ensure the compiler realizes that both the data and the pointer cannot change. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Lorenzo Bianconi says: ==================== veth: move ndo_xdp_xmit stats to peer veth_rq Move ndo_xdp_xmit ethtool stats accounting to peer veth_rq. Move XDP_TX accounting to veth_xdp_flush_bq routine. Changes since v1: - rename xdp_xmit[_err] counters to peer_tq_xdp_xmit[_err] ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Rely on 'remote' veth_rq to account ndo_xdp_xmit ethtool counters. Move XDP_TX accounting to veth_xdp_flush_bq routine. Remove 'rx' prefix in rx xdp ethool counters Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Substitute net_device point with veth_rq one in veth_xdp_flush_bq, veth_xdp_flush and veth_xdp_tx signature. This is a preliminary patch to account xdp_xmit counter on 'receiving' veth_rq Acked-by:
Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-