- Sep 16, 2015
-
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two patches for the nct6775 driver: add support for NCT6793D, and fix swapped registers" * tag 'hwmon-for-linus-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6775) Add support for NCT6793D hwmon: (nct6775) Swap STEP_UP_TIME and STEP_DOWN_TIME registers for most chips
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "This is a first set of pin control fixes for the v4.3 series. Nothing special to say, business as usual. - Some IS_ERR() fixes from Julia Lawall. I always wanted the compiler to catch these but error pointers by nailing them as an err pointer intrinsic type or something seem to be a "no can do". In any case, cocinelle is obviously up to the task, better than bugs staying around. - Better error handling for NULL GPIO chips. - Fix a compile error from the big irq desc refactoring. I'm surprised the fallout wasn't bigger than this" * tag 'pinctrl-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: samsung: s3c24xx: fix syntax error pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range() pinctrl: join lines that can be a single line within 80 columns pinctrl: digicolor: convert null test to IS_ERR test pinctrl: qcom: ssbi: convert null test to IS_ERR test
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "This is the first round of GPIO fixes for v4.3. Quite a lot of patches, but the influx of new stuff in the merge window was equally big, so I'm not surprised. - Return value checks and thus nicer errorpath for two drivers. - Make GPIO_RCAR arch neutral. - Propagate errors from GPIO chip ->get() vtable call. It turned out these can actually fail sometimes, especially on slowpath controllers doing I2C traffic and similar. - Update documentation to be in sync with the massive changes in the v4.3 merge window, phew. - Handle deferred probe properly in the OMAP driver. - Get rid of surplus MODULE_ALIAS() from sx150x" * tag 'gpio-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: omap: Fix GPIO numbering for deferred probe Documentation: gpio: Explain that <function>-gpio is also supported gpio: omap: Fix gpiochip_add() handling for deferred probe gpio: sx150x: Remove unnecessary MODULE_ALIAS() Documentation: gpio: board: describe the con_id parameter Documentation: gpio: board: add flags parameter to gpiod_get*() functions gpio: Propagate errors from chip->get() gpio: rcar: GPIO_RCAR doesn't relate to ARM gpio: mxs: need to check return value of irq_alloc_generic_chip gpio: mxc: need to check return value of irq_alloc_generic_chip
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - The selftest overreads the IV test vector. - Fix potential infinite loop in sunxi-ss driver. - Fix powerpc build failure when VMX is set without VSX" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - don't copy from source IV too much crypto: sunxi-ss - Fix a possible driver hang with ciphers crypto: vmx - VMX crypto should depend on CONFIG_VSX
-
Tony Luck authored
Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Woodhouse authored
The GPL does not permit us to link against the OpenSSL library. Use LGPL for sign-file and extract-file instead. [ The whole "openssl isn't compatible with gpl" is really just fear-mongering, but there's no reason not to make modsign LGPL, so nobody cares. - Linus ] Reported-by:
Julian Andres Klode <jak@jak-linux.org> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Julian Andres Klode <jak@jak-linux.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Sep 15, 2015
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A couple build fixes for drivers introduced in the merge window and a handful of patches to add more critical clocks on rockchip SoCs that are affected by newly introduced gpio clock handling" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: rockchip: Add pclk_peri to critical clocks on RK3066/RK3188 clk: rockchip: add pclk_cpu to the list of rk3188 critical clocks clk: rockchip: handle critical clocks after registering all clocks clk: Hi6220: separately build stub clock driver clk: h8s2678: Fix compile error
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Two small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] mount option sec=none not displayed properly in /proc/mounts CIFS: fix type confusion in copy offload ioctl
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A number of fixes for the merge window, fixing a number of cases missed when testing the uaccess code, particularly cases which only show up with certain compiler versions" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8431/1: fix alignement of __bug_table section entries arm/xen: Enable user access to the kernel before issuing a privcmd call ARM: domains: add memory dependencies to get_domain/set_domain ARM: domains: thread_info.h no longer needs asm/domains.h ARM: uaccess: fix undefined instruction on ARMv7M/noMMU ARM: uaccess: remove unneeded uaccess_save_and_disable macro ARM: swpan: fix nwfpe for uaccess changes ARM: 8429/1: disable GCC SRA optimization
-
- Sep 14, 2015
-
-
Linus Walleij authored
?SYNTAX ERROR irq_desc_get_irq_chip() does not exist. It should be irq_desc_get_chip(). Tested by compiling s3c2410_defconfig. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Tony Lindgren authored
If the gpio driver is confused about the numbers for gpio-ranges, pinctrl_ready_for_gpio_range() may get called with invalid GPIO causing a NULL pointer exception. Let's instead provide a warning that allows fixing the problem and return with error. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
There is no reason to break a line shorter than 80 columns. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Julia Lawall authored
Since commit 323de9ef ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update a driver that was introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Julia Lawall authored
Since commit 323de9ef ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update some drivers that were introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Tony Lindgren authored
If gpio-omap probe fails with -EPROBE_DEFER, the GPIO numbering keeps increasing. Only increase the gpio count if gpiochip_add() was successful as otherwise the numbers will increase for each probe attempt. Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Javier Martinez Canillas authored
The GPIO documentation mentions that GPIOs are mapped by defining a <function>-gpios property in the consumer device's node but a -gpio sufix is also supported after commit: dd34c37a ("gpio: of: Allow -gpio suffix for property names") Update the documentation to match the implementation. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Tony Lindgren authored
Currently we gpio-omap breaks if gpiochip_add() returns -EPROBE_DEFER: [ 0.570000] gpiochip_add: GPIOs 0..31 (gpio) failed to register [ 0.570000] omap_gpio 48310000.gpio: Could not register gpio chip -517 ... [ 3.670000] omap_gpio 48310000.gpio: Unbalanced pm_runtime_enable! Let's fix the issue by adding the missing pm_runtime_put() on error. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Javier Martinez Canillas authored
The driver has a I2C device id table that is used to create the module aliases and also "sx150x" isn't a supported I2C id, so it's never used. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Dirk Behme authored
The con_id parameter has to match the GPIO description and is automatically extended by the GPIO suffix if not NULL. I had to look into the code to understand this and properly find the GPIO I've been looking for, so document this. Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> Acked-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Dirk Behme authored
With commit 39b2bbe3 ("gpio: add flags argument to gpiod_get*() functions") the gpiod_get*() functions got a 'flags' parameter. Reflect this in the documentation, too. Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Bjorn Andersson authored
It's possible to have gpio chips hanging off unreliable remote buses where the get() operation will fail to acquire a readout of the current gpio state. Propagate these errors to the consumer so that they can act on, retry or ignore these failing reads, instead of treating them as the line being held high. Signed-off-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Kuninori Morimoto authored
8cd14702 ("gpio: rcar: Add r8a7795 (R-Car H3) support") added GPIO support for r8a7795. r8a7795 based on CONFIG_ARM64. OTOH, GPIO_RCAR driver can be compiled fine on non-ARM. This patch removed ARM dependency for it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Peng Fan authored
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxs_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by:
Peng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Peng Fan authored
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxc_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by:
Peng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> [Manually rebased] Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- Sep 13, 2015
-
-
Guenter Roeck authored
NCT6793D is register compatible with NCT6792D. Also move nct6775_sio_names[] closer to enum kinds to simplify adding new chips. Tested-by:
Grazvydas Ignotas <notasas@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but NCT6775. Reported-by:
Grazvydas Ignotas <notasas@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/crisLinus Torvalds authored
Pull CRIS updates from Jesper Nilsson: "Mostly removal of old cruft of which we can use a generic version, or fixes for code not commonly run in the cris port, but also additions to enable some good debug" * tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits) CRISv10: delete unused lib/dmacopy.c CRISv10: delete unused lib/old_checksum.c CRIS: fix switch_mm() lockdep splat CRISv32: enable LOCKDEP_SUPPORT CRIS: add STACKTRACE_SUPPORT CRISv32: annotate irq enable in idle loop CRISv32: add support for irqflags tracing CRIS: UAPI: use generic types.h CRIS: UAPI: use generic shmbuf.h CRIS: UAPI: use generic msgbuf.h CRIS: UAPI: use generic socket.h CRIS: UAPI: use generic sembuf.h CRIS: UAPI: use generic sockios.h CRIS: UAPI: use generic auxvec.h CRIS: UAPI: use generic headers via Kbuild CRIS: UAPI: fix elf.h export CRIS: don't make asm/elf.h depend on asm/user.h CRIS: UAPI: fix ptrace.h CRISv32: Squash compile warnings for axisflashmap CRISv32: Add GPIO driver to the default configs ...
-
Linus Torvalds authored
rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not a boolean value. Now, admittedly the "!= 0" doesn't really change the value (0 stays as zero, 1 stays as one), but it's not only redundant, it confuses gcc, and causes gcc to warn about the construct switch (rq_data_dir(req)) { case READ: ... case WRITE: ... that we have in a few drivers. Now, the gcc warning is silly and stupid (it seems to warn not about the switch value having a different type from the case statements, but about _any_ boolean switch value), but in this case the code itself is silly and stupid too, so let's just change it, and get rid of warnings like this: drivers/block/hd.c: In function ‘hd_request’: drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool] switch (rq_data_dir(req)) { The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is presumably because the old code (that just did a logical 'and' with 1) would then end up making the type of rq_data_dir() be u64 too. But if we want to retain the old regular integer type, let's just cast the result to 'int' rather than use that rather odd '!= 0'. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Fix up the writeback plugging introduced in commit d353d758 ("writeback: plug writeback at a high level") that then caused problems due to the unplug happening with a spinlock held. * writeback-plugging: writeback: plug writeback in wb_writeback() and writeback_inodes_wb() Revert "writeback: plug writeback at a high level"
-
Linus Torvalds authored
We had to revert the pluggin in writeback_sb_inodes() because the wb->list_lock is held, but we could easily plug at a higher level before taking that lock, and unplug after releasing it. This does that. Chris will run performance numbers, just to verify that this approach is comparable to the alternative (we could just drop and re-take the lock around the blk_finish_plug() rather than these two commits. I'd have preferred waiting for actual performance numbers before picking one approach over the other, but I don't want to release rc1 with the known "sleeping function called from invalid context" issue, so I'll pick this cleanup version for now. But if the numbers show that we really want to plug just at the writeback_sb_inodes() level, and we should just play ugly games with the spinlock, we'll switch to that. Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Sep 12, 2015
-
-
Linus Torvalds authored
I didn't notice this when merging the thermal code from Zhang, but his merge (commit 5a924a07: "Merge branches 'thermal-core' and 'thermal-intel' of .git into next") of the thermal-core and thermal-intel branches was wrong. In thermal-core, commit 17e8351a ("thermal: consistently use int for temperatures") converted the thermal layer to use "int" for temperatures. But in parallel, in the thermal-intel branch commit d0a12625 ("thermal: Add Intel PCH thermal driver") added support for the intel PCH thermal sensor using the old interfaces that used "unsigned long" pointers. This resulted in warnings like this: drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_temp = pch_thermal_get_temp, ^ drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’) drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_trip_temp = pch_get_trip_temp, ^ drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’) This fixes it. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge fourth patch-bomb from Andrew Morton: - sys_membarier syscall - seq_file interface changes - a few misc fixups * emailed patches from Andrew Morton <akpm@linux-foundation.org>: revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each" mm/early_ioremap: add explicit #include of asm/early_ioremap.h fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void selftests: enhance membarrier syscall test selftests: add membarrier syscall test sys_membarrier(): system-wide memory barrier (generic, x86) MODSIGN: fix a compilation warning in extract-cert
-
Vineet Gupta authored
Newer bitfiles needs the reduced clk even for SMP builds Cc: <stable@vger.kernel.org> #4.2 Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "NTB bug and documentation fixes, new device IDs, performance improvements, and adding a mailing list to MAINTAINERS for NTB" * tag 'ntb-4.3' of git://github.com/jonmason/ntb: NTB: Fix range check on memory window index NTB: Improve index handling in B2B MW workaround NTB: Fix documentation for ntb_peer_db_clear. NTB: Fix documentation for ntb_link_is_up NTB: Use unique DMA channels for TX and RX NTB: Remove dma_sync_wait from ntb_async_rx NTB: Clean up QP stats info NTB: Make the transport list in order of discovery NTB: Add PCI Device IDs for Broadwell Xeon NTB: Add flow control to the ntb_netdev NTB: Add list to MAINTAINERS
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull more input updates from Dmitry Torokhov: "Second round of updates for the input subsystem. This introduces two brand new touchscreen drivers (Colibri and imx6ul_tsc), some small driver fixes, and we are no longer report errors from evdev_flush() as users do not really have a way of handling errors, error codes that we were returning were not on the list of errors supposed to be returned by close(), and errors were causing issues with one of older versions of systemd" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: imx_keypad - remove obsolete comment Input: touchscreen - add imx6ul_tsc driver support Input: Add touchscreen support for Colibri VF50 Input: i8042 - lower log level for "no controller" message Input: evdev - do not report errors form flush() Input: elants_i2c - extend the calibration timeout to 12 seconds Input: sparcspkr - fix module autoload for OF platform drivers Input: regulator-haptic - fix module autoload for OF platform driver Input: pwm-beeper - fix module autoload for OF platform driver Input: ab8500-ponkey - Fix module autoload for OF platform driver Input: cyttsp - remove unnecessary MODULE_ALIAS() Input: elan_i2c - add ACPI ID "ELAN1000"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previous PM+ACPI pull request (cpufreq core and drivers, cpuidle, generic power domains framework). Some of them didn't make to that pull request and some fix issues introduced by it. The only really new thing is the support for suspend frequency in the cpufreq-dt driver, but it is needed to fix an issue with Exynos platforms. Specifics: - build fix for the new Mediatek MT8173 cpufreq driver (Guenter Roeck). - generic power domains framework fixes (power on error code path, subdomain removal) and cleanup of a deprecated API user (Geert Uytterhoeven, Jon Hunter, Ulf Hansson). - cpufreq-dt driver fixes including two fixes for bugs related to the new Operating Performance Points Device Tree bindings introduced recently (Viresh Kumar). - suspend frequency support for the cpufreq-dt driver (Bartlomiej Zolnierkiewicz, Viresh Kumar). - cpufreq core cleanups (Viresh Kumar). - intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi). - additional sanity check in the cpuidle core (Xunlei Pang). - fix for a comment related to CPU power management (Lina Iyer)" * tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: fix PCT_TO_HWP macro intel_pstate: Fix user input of min/max to legal policy region PM / OPP: Return suspend_opp only if it is enabled cpufreq-dt: add suspend frequency support cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency PM / OPP: add dev_pm_opp_get_suspend_opp() helper staging: board: Migrate away from __pm_genpd_name_add_device() cpufreq: Use __func__ to print function's name cpufreq: staticize cpufreq_cpu_get_raw() PM / Domains: Ensure subdomain is not in use before removing cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL cpuidle/coupled: Add sanity check for safe_state_index PM / Domains: Try power off masters in error path of __pm_genpd_poweron() cpufreq: dt: Tolerance applies on both sides of target voltage cpufreq: dt: Print error on failing to mark OPPs as shared cpufreq: dt: Check OPP count before marking them shared kernel/cpu_pm: fix cpu_cluster_pm_exit comment
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target-pending updates for v4.3-rc1. Mostly bug-fixes and minor changes this round. The fallout from the big v4.2-rc1 RCU conversion have (thus far) been minimal. The highlights this round include: - Move sense handling routines into scsi_common code (Sagi) - Return ABORTED_COMMAND sense key for PI errors (Sagi) - Add tpg_enabled_sendtargets attribute for disabled iscsi-target discovery (David) - Shrink target struct se_cmd by rearranging fields (Roland) - Drop iSCSI use of mutex around max_cmd_sn increment (Roland) - Replace iSCSI __kernel_sockaddr_storage with sockaddr_storage (Andy + Chris) - Honor fabric max_data_sg_nents I/O transfer limit (Arun + Himanshu + nab) - Fix EXTENDED_COPY >= v4.1 regression OOPsen (Alex + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (37 commits) target: use stringify.h instead of own definition target/user: Fix UFLAG_UNKNOWN_OP handling target: Remove no-op conditional target/user: Remove unused variable target: Fix max_cmd_sn increment w/o cmdsn mutex regressions target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess target/qla2xxx: Honor max_data_sg_nents I/O transfer limit target/iscsi: Replace __kernel_sockaddr_storage with sockaddr_storage target/iscsi: Replace conn->login_ip with login_sockaddr target/iscsi: Keep local_ip as the actual sockaddr target/iscsi: Fix np_ip bracket issue by removing np_ip target: Drop iSCSI use of mutex around max_cmd_sn increment qla2xxx: Update tcm_qla2xxx module description to 24xx+ iscsi-target: Add tpg_enabled_sendtargets for disabled discovery drivers: target: Drop unlikely before IS_ERR(_OR_NULL) target: check DPO/FUA usage for COMPARE AND WRITE target: Shrink struct se_cmd by rearranging fields target: Remove cmd->se_ordered_id (unused except debug log lines) target: add support for START_STOP_UNIT SCSI opcode target: improve unsupported opcode message ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull second round of SCSI updates from James Bottomley: "There's one late arriving patch here (added today), fixing a build issue which the scsi_dh patch set in here uncovered. Other than that, everything has been incubated in -next and the checkers for a week. The major pieces of this patch are a set patches facilitating better integration between scsi and scsi_dh (the device handling layer used by multi-path; all the dm parts are acked by Mike Snitzer). This also includes driver updates for mp3sas, scsi_debug and an assortment of bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (50 commits) scsi_dh: fix randconfig build error scsi: fix scsi_error_handler vs. scsi_host_dev_release race fcoe: Convert use of __constant_htons to htons mpt2sas: setpci reset kernel oops fix pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY lpfc: Fix possible use-after-free and double free in lpfc_mbx_cmpl_rdp_page_a2() bfa: Fix incorrect de-reference of pointer bfa: Fix indentation scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs. scsi_debug: resp_request: remove unused variable scsi_debug: fix REPORT LUNS Well Known LU scsi_debug: schedule_resp fix input variable check scsi_debug: make dump_sector static scsi_debug: vfree is null safe so drop the check scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS; scsi_debug: define pr_fmt() for consistent logging mpt2sas: Refcount fw_events and fix unsafe list usage mpt2sas: Refcount sas_device objects and fix unsafe list usage scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate() scsi_dh: don't allow to detach device handlers at runtime ...
-
Steve French authored
When the user specifies "sec=none" in a cifs mount, we set sec_type as unspecified (and set a flag and the username will be null) rather than setting sectype as "none" so cifs_show_security was not properly displaying it in cifs /proc/mounts entries. Signed-off-by:
Steve French <steve.french@primarydata.com> Reviewed-by:
Jeff Layton <jlayton@poochiereds.net>
-