commit f2d1362f upstream.

Currently, if the number of leading zeros is greater than fits into a
complete limb, mpi_write_sgl() skips them by iterating over them limb-wise.

However, it fails to adjust its internal leading zeros tracking variable,
lzeros, accordingly: it does a

  p -= sizeof(alimb);
  continue;

which should really have been a

  lzeros -= sizeof(alimb);
  continue;

Since lzeros never decreases if its initial value >= sizeof(alimb), nothing
gets copied by mpi_write_sgl() in that case.

Instead of skipping the high order zero limbs within the loop as shown
above, fix the issue by adjusting the copying loop's bounds.

Fixes: 2d4d1eea

 ("lib/mpi: Add mpi sgl helpers")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8a092e68 upstream.

Bypass support was added in commit d38018f2 ("regulator: anatop: Add
bypass support to digital LDOs"). A check for valid voltage selectors was
added in commit da0607c8 ("regulator: anatop: Fail on invalid voltage
selector") but it also discards all regulators that are in bypass mode. Add
check for the bypass setting. Errors below were seen on a Variscite mx6
board.

anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22
anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22

Fixes: da0607c8

 ("regulator: anatop: Fail on invalid voltage selector")
Signed-off-by: Mika Båtsman <mbatsman@mvista.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 48a61e1e upstream.

Add proper error path (for disabling runtime PM) when registering of
hwrng fails.

Fixes: b329669e

 ("hwrng: exynos - Add support for Exynos random number generator")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e43e94c1 upstream.

Currently, the userspace governor only updates frequency on GOV_LIMITS
if policy->cur falls outside policy->{min/max}. However, it is also
necessary to update current frequency on GOV_LIMITS to match the user
requested value if it can be achieved within the new policy->{max/min}.

This was previously the behaviour in the governor until commit d1922f02
("cpufreq: Simplify userspace governor") which incorrectly assumed that
policy->cur == user requested frequency via scaling_setspeed. This won't
be true if the user requested frequency falls outside policy->{min/max}.
Ex: a temporary thermal cap throttled the user requested frequency.

Fix this by storing the user requested frequency in a seperate variable.
The governor will then try to achieve this request on every GOV_LIMITS
change.

Fixes: d1922f02

 (cpufreq: Simplify userspace governor)
Signed-off-by: Sai Gurrappadi <sgurrappadi@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 096a8b6d upstream.

The argument i of atomic_*_return() operations is given to inline asm
with the "bd" constraint, which means "An Op2 register where Op1 is a
data unit register and the instruction supports O2R", however Op1 is
constrained by "da" which allows an address unit register to be used.

Fix the constraint to use "br", meaning "An Op2 register and the
instruction supports O2R", i.e. not requiring Op1 to be a data unit
register.

Fixes: d6dfe250

 ("locking,arch,metag: Fold atomic_ops")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a87eeb90 upstream.

Commit 655ee63c ("scsi constants: command, sense key + additional
sense string") added a "Completed" sense string with key 0xF to
snstext[], but failed to updated the upper bounds check of the sense key
in scsi_sense_key_string().

Fixes: 655ee63c

 ("[SCSI] scsi constants: command, sense key + additional sense strings")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8ddc0563

 upstream.

I hit this with syzkaller:

    kasan: CONFIG_KASAN_INLINE enabled
    kasan: GPF could be caused by NULL-ptr deref or user memory access
    general protection fault: 0000 [#1] PREEMPT SMP KASAN
    CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    task: ffff88011278d600 task.stack: ffff8801120c0000
    RIP: 0010:[<ffffffff82c8ba07>]  [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100
    RSP: 0018:ffff8801120c7a60  EFLAGS: 00010006
    RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007
    RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048
    RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790
    R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980
    R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286
    FS:  00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0
    Stack:
     ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0
     ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000
     ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0
    Call Trace:
     [<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670
     [<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0
     [<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830
     [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90
     [<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050
     [<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0
     [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200
     [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0
     [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0
     [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190
     [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0
     [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0
     [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0
     [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46
    RIP  [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100
     RSP <ffff8801120c7a60>
    ---[ end trace 5955b08db7f2b029 ]---

This can happen if snd_hrtimer_open() fails to allocate memory and
returns an error, which is currently not checked by snd_timer_open():

    ioctl(SNDRV_TIMER_IOCTL_SELECT)
     - snd_timer_user_tselect()
	- snd_timer_close()
	   - snd_hrtimer_close()
	      - (struct snd_timer *) t->private_data = NULL
        - snd_timer_open()
           - snd_hrtimer_open()
              - kzalloc() fails; t->private_data is still NULL

    ioctl(SNDRV_TIMER_IOCTL_START)
     - snd_timer_user_start()
	- snd_timer_start()
	   - snd_timer_start1()
	      - snd_hrtimer_start()
		- t->private_data == NULL // boom

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6b760bb2

 upstream.

I got this:

    divide error: 0000 [#1] PREEMPT SMP KASAN
    CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    task: ffff8801120a9580 task.stack: ffff8801120b0000
    RIP: 0010:[<ffffffff82c8bd9a>]  [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0
    RSP: 0018:ffff88011aa87da8  EFLAGS: 00010006
    RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000
    RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001
    RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048
    R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00
    R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000
    FS:  00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0
    Stack:
     0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76
     ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0
     00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0
    Call Trace:
     <IRQ>
     [<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00
     [<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130
     [<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0
     [<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0
     [<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0
     [<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0
     [<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0
     [<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0
     [<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0
     <EOI>
     [<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60
     [<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670
     [<ffffffff82c87015>] snd_timer_continue+0x45/0x80
     [<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830
     [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90
     [<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0
     [<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050
     [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200
     [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0
     [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0
     [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190
     [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0
     [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0
     [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0
     [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00
    RIP  [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0
     RSP <ffff88011aa87da8>
    ---[ end trace 6aa380f756a21074 ]---

The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a
completely new/unused timer -- it will have ->sticks == 0, which causes a
divide by 0 in snd_hrtimer_callback().

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 11749e08

 upstream.

I got this with syzkaller:

    ==================================================================
    BUG: KASAN: null-ptr-deref on address 0000000000000020
    Read of size 32 by task syz-executor/22519
    CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2
    014
     0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90
     ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80
     ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68
    Call Trace:
     [<ffffffff81f9f141>] dump_stack+0x83/0xb2
     [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0
     [<ffffffff8161ff74>] kasan_report+0x34/0x40
     [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790
     [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0
     [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20
     [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790
     [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
     [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250
     [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0
     [<ffffffff8127c278>] ? do_group_exit+0x108/0x330
     [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0
     [<ffffffff81674dfe>] __vfs_read+0x10e/0x550
     [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
     [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50
     [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60
     [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190
     [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380
     [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0
     [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0
     [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0
     [<ffffffff81675355>] vfs_read+0x115/0x330
     [<ffffffff81676371>] SyS_read+0xd1/0x1a0
     [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
     [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20
     [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0
     [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0
     [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25
    ==================================================================

There are a couple of problems that I can see:

 - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets
   tu->queue/tu->tqueue to NULL on memory allocation failure, so read()
   would get a NULL pointer dereference like the above splat

 - the same ioctl() can free tu->queue/to->tqueue which means read()
   could potentially see (and dereference) the freed pointer

We can fix both by taking the ioctl_lock mutex when dereferencing
->queue/->tqueue, since that's always held over all the ioctl() code.

Just looking at the code I find it likely that there are more problems
here such as tu->qhead pointing outside the buffer if the size is
changed concurrently using SNDRV_TIMER_IOCTL_PARAMS.

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fd06c77e

 upstream.

The subwoofer on Inspiron 7559 was disabled originally.
Applying a pin fixup to node 0x1b can enable it and make it work.

Old pin: 0x411111f0
New pin: 0x90170151

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 311042d1 upstream.

This patch enables headset microphone on some variants of
Dell Inspiron 5468. (Dell SSID 0x07ad)

BugLink: https://bugs.launchpad.net/bugs/1617900


Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 816f318b

 upstream.

When a seq-virmidi driver is initialized, it registers a rawmidi
instance with its callback to create an associated seq kernel client.
Currently it's done throughly in rawmidi's register_mutex context.
Recently it was found that this may lead to a deadlock another rawmidi
device that is being attached with the sequencer is accessed, as both
open with the same register_mutex.  This was actually triggered by
syzkaller, as Dmitry Vyukov reported:

======================================================
 [ INFO: possible circular locking dependency detected ]
 4.8.0-rc1+ #11 Not tainted
 -------------------------------------------------------
 syz-executor/7154 is trying to acquire lock:
  (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341

 but task is already holding lock:
  (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&grp->list_mutex){++++.+}:
    [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
    [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22
    [<     inline     >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681
    [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822
    [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418
    [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101
    [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297
    [<     inline     >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383
    [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450
    [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645
    [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164
    [<     inline     >] __snd_device_register sound/core/device.c:162
    [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212
    [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749
    [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123
    [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564
    ......

 -> #0 (register_mutex#5){+.+.+.}:
    [<     inline     >] check_prev_add kernel/locking/lockdep.c:1829
    [<     inline     >] check_prevs_add kernel/locking/lockdep.c:1939
    [<     inline     >] validate_chain kernel/locking/lockdep.c:2266
    [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335
    [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
    [<     inline     >] __mutex_lock_common kernel/locking/mutex.c:521
    [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621
    [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
    [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188
    [<     inline     >] subscribe_port sound/core/seq/seq_ports.c:427
    [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510
    [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579
    [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480
    [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225
    [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440
    [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375
    [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281
    [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274
    [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138
    [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639
    ......

 other info that might help us debug this:

 Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&grp->list_mutex);
                                lock(register_mutex#5);
                                lock(&grp->list_mutex);
   lock(register_mutex#5);

 *** DEADLOCK ***
======================================================

The fix is to simply move the registration parts in
snd_rawmidi_dev_register() to the outside of the register_mutex lock.
The lock is needed only to manage the linked list, and it's not
necessarily to cover the whole initialization process.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6b1ca4bc

 upstream.

In hwdep interface of fireworks driver, accessing to user space is in a
critical section with disabled local interrupt. Depending on architecture,
accessing to user space can cause page fault exception. Then local
processor stores machine status and handles the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it don't handle usual interrupts
from hardware.

This commit fixes this bug, performing the accessing outside spinlock. This
commit also gives up counting the number of queued response messages to
simplify ring-buffer management.

Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Fixes: 555e8a8f

('ALSA: fireworks: Add command/response functionality into hwdep interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 04b2d9c9

 upstream.

In hwdep interface of firewire-tascam driver, accessing to user space is
in a critical section with disabled local interrupt. Depending on
architecture, accessing to user space can cause page fault exception. Then
local processor stores machine status and handle the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it doesn't handle usual interrupts
from hardware.

This commit fixes this bug, by performing the accessing outside spinlock.

Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Fixes: e5e0c3dd

('ALSA: firewire-tascam: add hwdep interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83d9956b

 upstream.

Avoid getting sample rate on B850V3 CP2114 as it is unsupported and
causes noisy "current rate is different from the runtime rate" messages
when playback starts.

Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8b18e235 upstream.

For algorithms that implement IV generators before the crypto ops,
the IV needed for decryption is initially located in req->src
scatterlist, not in req->iv.

Avoid copying the IV into req->iv by modifying the (givdecrypt)
descriptors to load it directly from req->src.
aead_givdecrypt() is no longer needed and goes away.

Fixes: 479bcc7c

 ("crypto: caam - Convert authenc to new AEAD interface")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6c4687cc

 upstream.

__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path,
it should only do this if page_check_address() fails.

This means that every enable/disable leads to unbalanced mem_cgroup_uncharge()
from put_page(old_page), it is trivial to underflow the page_counter->count
and trigger OOM.

Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Fixes: 00501b53 ("mm: memcontrol: rewrite charge API")
Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2e63ad4b

 upstream.

native_smp_prepare_cpus
  -> default_setup_apic_routing
    -> enable_IR_x2apic
      -> irq_remapping_prepare
        -> intel_prepare_irq_remapping
          -> intel_setup_irq_remapping

So IR table is setup even if "noapic" boot parameter is added. As a result we
crash later when the interrupt affinity is set due to a half initialized
remapping infrastructure.

Prevent remap initialization when IOAPIC is disabled.

Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a77ec83a upstream.

The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi
command's response iovec throughout the lifetime of the command.  Rather, it
is more likely to contain an iovec from an immediately following command
after looping back around to vhost_get_vq_desc().  Pass along the iovec
entirely instead.

Fixes: 79c14141

 ("vhost/scsi: Convert completion path to use copy_to_iter")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit acc9cf8c

 upstream.

This patch fixes a cachedev registration-time allocation deadlock.
This can deadlock on boot if your initrd auto-registeres bcache devices:

Allocator thread:
[  720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds.
[  720.732361]  [<ffffffff816eeac7>] schedule+0x37/0x90
[  720.732963]  [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache]
[  720.733538]  [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[  720.734137]  [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache]
[  720.734715]  [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache]
[  720.735311]  [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950
[  720.735884]  [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache]

Registration thread:
[  720.710403] INFO: task bash:3531 blocked for more than 120 seconds.
[  720.715226]  [<ffffffff816eeac7>] schedule+0x37/0x90
[  720.715805]  [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[  720.716409]  [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache]
[  720.717008]  [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache]
[  720.717586]  [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[  720.718191]  [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache]
[  720.718766]  [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70
[  720.719369]  [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350
[  720.719968]  [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache]
[  720.720553]  [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache]
[  720.721153]  [<ffffffff81354cef>] kobj_attr_store+0xf/0x20
[  720.721730]  [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50
[  720.722327]  [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180
[  720.722904]  [<ffffffff81225177>] __vfs_write+0x37/0x110
[  720.723503]  [<ffffffff81228048>] ? __sb_start_write+0x58/0x110
[  720.724100]  [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0
[  720.724675]  [<ffffffff812258a9>] vfs_write+0xa9/0x1b0
[  720.725275]  [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70
[  720.725849]  [<ffffffff81226755>] SyS_write+0x55/0xd0
[  720.726451]  [<ffffffff8106a390>] ? do_page_fault+0x30/0x80
[  720.727045]  [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71

The fifo code in upstream bcache can't use the last element in the buffer,
which was the cause of the bug: if you asked for a power of two size,
it'd give you a fifo that could hold one less than what you asked for
rather than allocating a buffer twice as big.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c0082e98 upstream.

An assertion in layout_in_gaps() verifies that the gap_lebs pointer is
below the maximum bound. When computing this maximum bound the idx_lebs
count is multiplied by sizeof(int), while C pointers arithmetic does take
into account the size of the pointed elements implicitly already. Remove
the multiplication to fix the assertion.

Fixes: 1e51764a

 ("UBIFS: add new flash file system")
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e1ff3dd1

 upstream.

Workdir creation fails in latest kernel.

Fix by allowing EOPNOTSUPP as a valid return value from
vfs_removexattr(XATTR_NAME_POSIX_ACL_*).  Upper filesystem may not support
ACL and still be perfectly able to support overlayfs.

Reported-by: Martin Ziegler <ziegler@uni-freiburg.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: c11b9fdd

 ("ovl: remove posix_acl_default from workdir")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7cb35119

 upstream.

Be defensive about what underlying fs provides us in the returned xattr
list buffer.  If it's not properly null terminated, bail out with a warning
insead of BUG.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c11b9fdd

 upstream.

Clear out posix acl xattrs on workdir and also reset the mode after
creation so that an inherited sgid bit is cleared.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0956254a

 upstream.

When a copy up of a directory occurs which has the opaque xattr set, the
xattr remains in the upper directory. The immediate behavior with overlayfs
is that the upper directory is not treated as opaque, however after a
remount the opaque flag is used and upper directory is treated as opaque.
This causes files created in the lower layer to be hidden when using
multiple lower directories.

Fix by not copying up the opaque flag.

To reproduce:

 ----8<---------8<---------8<---------8<---------8<---------8<----
mkdir -p l/d/s u v w mnt
mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt
rm -rf mnt/d/
mkdir -p mnt/d/n
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
touch mnt/d/foo
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
ls mnt/d
 ----8<---------8<---------8<---------8<---------8<---------8<----

output should be:  "foo  n"

Reported-by: Derek McGowan <dmcg@drizz.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291


Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5955102c

 upstream

parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[only the fs.h change included to make backports easier - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 57b8f112

 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 27727df2 upstream.

When I added some extra sanity checking in timekeeping_get_ns() under
CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns()
method was using timekeeping_get_ns().

Thus the locking added to the debug checks broke the NMI-safety of
__ktime_get_fast_ns().

This patch open-codes the timekeeping_get_ns() logic for
__ktime_get_fast_ns(), so can avoid any deadlocks in NMI.

Fixes: 4ca22c26

 "timekeeping: Add warnings when overflows or underflows are observed"
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1471993702-29148-2-git-send-email-john.stultz@linaro.org


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a4f8f666 upstream.

It was reported that hibernation could fail on the 2nd attempt, where the
system hangs at hibernate() -> syscore_resume() -> i8237A_resume() ->
claim_dma_lock(), because the lock has already been taken.

However there is actually no other process would like to grab this lock on
that problematic platform.

Further investigation showed that the problem is triggered by setting
/sys/power/pm_trace to 1 before the 1st hibernation.

Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend,
and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller
than 1970) to the release date of that motherboard during POST stage, thus
after resumed, it may seem that the system had a significant long sleep time
which is a completely meaningless value.

Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the
sleep time happened to be set to 1, fls() returns 32 and we add 1 to
sleep_time_bin[32], which causes an out of bounds array access and therefor
memory being overwritten.

As depicted by System.map:
0xffffffff81c9d080 b sleep_time_bin
0xffffffff81c9d100 B dma_spin_lock
the dma_spin_lock.val is set to 1, which caused this problem.

This patch adds a sanity check in tk_debug_account_sleep_time()
to ensure we don't index past the sleep_time_bin array.

[jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the
 issue slightly differently, but borrowed his excelent explanation of the
 issue here.]

Fixes: 5c83545f

 "power: Add option to log time spent in suspend"
Reported-by: Janek Kozicki <cosurgi@gmail.com>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.org


Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f3d7ebde

 upstream.

From inspection, the superblock sb_inprogress check is done in the
verifier and triggered only for the primary superblock via a
"bp->b_bn == XFS_SB_DADDR" check.

Unfortunately, the primary superblock is an uncached buffer, and
hence it is configured by xfs_buf_read_uncached() with:

	bp->b_bn = XFS_BUF_DADDR_NULL;  /* always null for uncached buffers */

And so this check never triggers. Fix it.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3e103a65 upstream.

commit cbaadf0f ("ASoC: atmel_ssc_dai: refactor the startup and
shutdown") refactored code such that the SSC is reset on every
startup; this breaks duplex audio (e.g. first start audio playback,
then start record, causing the playback to stop/hang)

Fixes: cbaadf0f

 (ASoC: atmel_ssc_dai: refactor the startup and shutdown)
Signed-off-by: Christoph Huber <c.huber@bct-electronic.com>
Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 89f82cbb

 upstream.

Use instead __copy_from_user_inatomic() and fallback to slow-path where
we drop and re-aquire the lock in case of fault.

Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6f00975c

 upstream.

Somehow this one slipped through, which means drivers without modeset
support can be oopsed (since those also don't call
drm_mode_config_init, which means the crtc lookup will chase an
uninitalized idr).

Reported-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 13f479b9

 upstream.

This bug seems to be present for a very long time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 532c34b5

 upstream.

The sclp_ctl_ioctl_sccb function uses two copy_from_user calls to
retrieve the sclp request from user space. The first copy_from_user
fetches the length of the request which is stored in the first two
bytes of the request. The second copy_from_user gets the complete
sclp request, but this copies the length field a second time.
A malicious user may have changed the length in the meantime.

Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4116def2

 upstream.

The last field "flags" of object "minfo" is not initialized.
Copying this object out may leak kernel stack data.
Assign 0 to it to avoid leak.

Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Juerg Haefliger <juerg.haefliger@hpe.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 190ce869 upstream.

Currently we have 2 segments that are bolted for the kernel linear
mapping (ie 0xc000... addresses). This is 0 to 1TB and also the kernel
stacks. Anything accessed outside of these regions may need to be
faulted in. (In practice machines with TM always have 1T segments)

If a machine has < 2TB of memory we never fault on the kernel linear
mapping as these two segments cover all physical memory. If a machine
has > 2TB of memory, there may be structures outside of these two
segments that need to be faulted in. This faulting can occur when
running as a guest as the hypervisor may remove any SLB that's not
bolted.

When we treclaim and trecheckpoint we have a window where we need to
run with the userspace GPRs. This means that we no longer have a valid
stack pointer in r1. For this window we therefore clear MSR RI to
indicate that any exceptions taken at this point won't be able to be
handled. This means that we can't take segment misses in this RI=0
window.

In this RI=0 region, we currently access the thread_struct for the
process being context switched to or from. This thread_struct access
may cause a segment fault since it's not guaranteed to be covered by
the two bolted segment entries described above.

We've seen this with a crash when running as a guest with > 2TB of
memory on PowerVM:

  Unrecoverable exception 4100 at c00000000004f138
  Oops: Unrecoverable exception, sig: 6 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  CPU: 1280 PID: 7755 Comm: kworker/1280:1 Tainted: G                 X 4.4.13-46-default #1
  task: c000189001df4210 ti: c000189001d5c000 task.ti: c000189001d5c000
  NIP: c00000000004f138 LR: 0000000010003a24 CTR: 0000000010001b20
  REGS: c000189001d5f730 TRAP: 4100   Tainted: G                 X  (4.4.13-46-default)
  MSR: 8000000100001031 <SF,ME,IR,DR,LE>  CR: 24000048  XER: 00000000
  CFAR: c00000000004ed18 SOFTE: 0
  GPR00: ffffffffc58d7b60 c000189001d5f9b0 00000000100d7d00 000000003a738288
  GPR04: 0000000000002781 0000000000000006 0000000000000000 c0000d1f4d889620
  GPR08: 000000000000c350 00000000000008ab 00000000000008ab 00000000100d7af0
  GPR12: 00000000100d7ae8 00003ffe787e67a0 0000000000000000 0000000000000211
  GPR16: 0000000010001b20 0000000000000000 0000000000800000 00003ffe787df110
  GPR20: 0000000000000001 00000000100d1e10 0000000000000000 00003ffe787df050
  GPR24: 0000000000000003 0000000000010000 0000000000000000 00003fffe79e2e30
  GPR28: 00003fffe79e2e68 00000000003d0f00 00003ffe787e67a0 00003ffe787de680
  NIP [c00000000004f138] restore_gprs+0xd0/0x16c
  LR [0000000010003a24] 0x10003a24
  Call Trace:
  [c000189001d5f9b0] [c000189001d5f9f0] 0xc000189001d5f9f0 (unreliable)
  [c000189001d5fb90] [c00000000001583c] tm_recheckpoint+0x6c/0xa0
  [c000189001d5fbd0] [c000000000015c40] __switch_to+0x2c0/0x350
  [c000189001d5fc30] [c0000000007e647c] __schedule+0x32c/0x9c0
  [c000189001d5fcb0] [c0000000007e6b58] schedule+0x48/0xc0
  [c000189001d5fce0] [c0000000000deabc] worker_thread+0x22c/0x5b0
  [c000189001d5fd80] [c0000000000e7000] kthread+0x110/0x130
  [c000189001d5fe30] [c000000000009538] ret_from_kernel_thread+0x5c/0xa4
  Instruction dump:
  7cb103a6 7cc0e3a6 7ca222a6 78a58402 38c00800 7cc62838 08860000 7cc000a6
  38a00006 78c60022 7cc62838 0b060000 <e8c701a0> 7ccff120 e8270078 e8a70098
  ---[ end trace 602126d0a1dedd54 ]---

This fixes this by copying the required data from the thread_struct to
the stack before we clear MSR RI. Then once we clear RI, we only access
the stack, guaranteeing there's no segment miss.

We also tighten the region over which we set RI=0 on the treclaim()
path. This may have a slight performance impact since we're adding an
mtmsr instruction.

Fixes: 090b9284

 ("powerpc/tm: Clear MSR RI in non-recoverable TM code")
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 5706aca74fe4 ("NVMe: Don't unmap controller registers on reset"),
which backported b00a726a

 to the 4.4.y kernel introduced a
regression in which it didn't call pci_disable_device in the error path
of nvme_pci_enable.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Embarassed-developer: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>