This patch adds support for spoof check configuration for VFs.
When it is enabled, "spoof checking" is done for both mac address
and VLAN. For each VF, the HW ensures that the source MAC address
(or VLAN) of every outgoing packet exists in the MAC-list (or
VLAN-list) configured for RX filtering for that VF. If not,
the packet is dropped.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

This patch adds support to configure VF link properties.
The options are auto, enable, and disable. Even if the PF
is down, the communication between VFs will be normal
if the VFs are set to enable. The commands are as follows:

'ip link set <pf> vf <vf_id> state <auto|enable|disable>'
change the VF status

'ip link show'
show the setting status

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

syzbot reported a warning [1] that triggered after recent Jiri patch.

This exposes a bug that we hit already in the past (see commit
ff244c6b ("tun: handle register_netdevice() failures properly")
for details)

tun uses priv->destructor without an ndo_init() method.

register_netdevice() can return an error, but will
not call priv->destructor() in some cases. Jiri recent
patch added one more.

A long term fix would be to transfer the initialization
of what we destroy in ->destructor() in the ndo_init()

This looks a bit risky given the complexity of tun driver.

A simpler fix is to detect after the failed register_netdevice()
if the tun_free_netdev() function was called already.

[1]
ODEBUG: free active (active state 0) object type: timer_list hint: tun_flow_cleanup+0x0/0x280 drivers/net/tun.c:457
WARNING: CPU: 0 PID: 8653 at lib/debugobjects.c:481 debug_print_object+0x168/0x250 lib/debugobjects.c:481
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 8653 Comm: syz-executor976 Not tainted 5.4.0-rc1-next-20191004 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 panic+0x2dc/0x755 kernel/panic.c:220
 __warn.cold+0x2f/0x3c kernel/panic.c:581
 report_bug+0x289/0x300 lib/bug.c:195
 fixup_bug arch/x86/kernel/traps.c:174 [inline]
 fixup_bug arch/x86/kernel/traps.c:169 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1028
RIP: 0010:debug_print_object+0x168/0x250 lib/debugobjects.c:481
Code: dd 80 b9 e6 87 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 b5 00 00 00 48 8b 14 dd 80 b9 e6 87 48 c7 c7 e0 ae e6 87 e8 80 84 ff fd <0f> 0b 83 05 e3 ee 80 06 01 48 83 c4 20 5b 41 5c 41 5d 41 5e 5d c3
RSP: 0018:ffff888095997a28 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815cb526 RDI: ffffed1012b32f37
RBP: ffff888095997a68 R08: ffff8880a92ac580 R09: ffffed1015d04101
R10: ffffed1015d04100 R11: ffff8880ae820807 R12: 0000000000000001
R13: ffffffff88fb5340 R14: ffffffff81627110 R15: ffff8880aa41eab8
 __debug_check_no_obj_freed lib/debugobjects.c:963 [inline]
 debug_check_no_obj_freed+0x2d4/0x43f lib/debugobjects.c:994
 kfree+0xf8/0x2c0 mm/slab.c:3755
 kvfree+0x61/0x70 mm/util.c:593
 netdev_freemem net/core/dev.c:9384 [inline]
 free_netdev+0x39d/0x450 net/core/dev.c:9533
 tun_set_iff drivers/net/tun.c:2871 [inline]
 __tun_chr_ioctl+0x317b/0x3f30 drivers/net/tun.c:3075
 tun_chr_ioctl+0x2b/0x40 drivers/net/tun.c:3355
 vfs_ioctl fs/ioctl.c:47 [inline]
 file_ioctl fs/ioctl.c:539 [inline]
 do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:726
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:743
 __do_sys_ioctl fs/ioctl.c:750 [inline]
 __se_sys_ioctl fs/ioctl.c:748 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:748
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441439
Code: e8 9c ae 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff61c37438 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441439
RDX: 0000000020000400 RSI: 00000000400454ca RDI: 0000000000000004
RBP: 00007fff61c37470 R08: 0000000000000001 R09: 0000000100000000
R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffff
R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..

Fixes: ff927412

 ("net: introduce name_node struct to be used in hashlist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

There is a spelling mistake in a NL_SET_ERR_MSG_MOD message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

Don't populate const arrays on the stack but instead make them
static. Makes the object code smaller by 1058 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  29879	   6144	      0	  36023	   8cb7	drivers/net/phy/mscc.o

After:
   text	   data	    bss	    dec	    hex	filename
  28437	   6528	      0	  34965	   8895	drivers/net/phy/mscc.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

Don't populate the array exp_mask on the stack but instead make it
static. Makes the object code smaller by 224 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  77832	   2290	      0	  80122	  138fa	ethernet/netronome/nfp/bpf/jit.o

After:
   text	   data	    bss	    dec	    hex	filename
  77544	   2354	      0	  79898	  1381a	ethernet/netronome/nfp/bpf/jit.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>

Ioana Ciornei says:

====================
dpaa2-eth: misc cleanup

This patch set consists of some cleanup patches ranging from removing dead
code to fixing a minor issue in ethtool stats. Also, unbounded while loops
are removed from the driver by adding a maximum number of retries for DPIO
portal commands.

Changes in v2:
 - return -ETIMEDOUT where possible if the number of retries is hit
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Throughout the driver there are several places where we wait
indefinitely for DPIO portal commands to be executed, while
the portal returns a busy response code.

Even though in theory we are guaranteed the portals become
available eventually, in practice the QBMan hardware module
may become unresponsive in various corner cases.

Make sure we can never get stuck in an infinite while loop
by adding a retry counter for all portal commands.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't print error message for a successful return value.

Fixes: d84c3a4d

 ("dpaa2-eth: Add new DPNI statistics counters")

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove one function call whose result was not used anywhere.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't populate the array tick_array on the stack but instead make it
static. Makes the object code smaller by 29 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  19191	    432	      0	  19623	   4ca7	hisilicon/hns3/hns3pf/hclge_tm.o

After:
   text	   data	    bss	    dec	    hex	filename
  19098	    496	      0	  19594	   4c8a	hisilicon/hns3/hns3pf/hclge_tm.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't populate the arrays port_map and sl_map on the stack but
instead make them static. Makes the object code smaller by 64 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  49575	   6872	     64	  56511	   dcbf	hisilicon/hns/hns_dsaf_main.o

After:
   text	   data	    bss	    dec	    hex	filename
  49350	   7032	     64	  56446	   dc7e	hisilicon/hns/hns_dsaf_main.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net/tls: minor micro optimizations

This set brings a number of minor code changes from my tree which
don't have a noticeable impact on performance but seem reasonable
nonetheless.

First sk_msg_sg copy array is converted to a bitmap, zeroing that
structure takes a lot of time, hence we should try to keep it
small.

Next two conditions are marked as unlikely, GCC seemed to had
little trouble correctly reasoning about those.

Patch 4 adds parameters to tls_device_decrypted() to avoid
walking structures, as all callers already have the relevant
pointers.

Lastly two boolean members of TLS context structures are
converted to a bitfield.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Use a single bit instead of boolean to remember if packet
was already decrypted.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Store async_capable on a single bit instead of a full integer
to save space.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid unnecessary pointer chasing and calculations, callers already
have most of the state tls_device_decrypted() needs.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure GCC realizes it's unlikely that allocations will fail.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tell GCC sk->err is not likely to be set.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't use bool array in struct sk_msg_sg, save 12 bytes.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use helper skb_ensure_writable in two more places to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Consistent with how pskb_may_pull() also now does so.

Signed-off-by: David S. Miller <davem@davemloft.net>

This function de-facto returns a bool, so let's change the return type
accordingly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sameeh Jubran says:

====================
ena: Support ethtool set_channels

Difference from v2:
* ethtool's set/get channels: Switched to using combined instead of
  separate rx/tx
* Fixed error handling in set_channels
* Fixed indentation and cosmetic issues as requested by Jakub Kicinski

Difference from v1:
* Dropped the print from patch 0002 - "net: ena: multiple queue creation
  related cleanups" as requested by David Miller
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Set channels callback enables the user to change the count of queues
used by the driver using ethtool. We decided to currently support only
equal number of rx and tx queues, this might change in the future.

Also rename dev_up to dev_was_up in ena_update_queue_count() to make
it clearer.

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of queues can be derived using ethtool, no need to print
it in ena_probe()

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Update ena_ethtool:ena_get_channels() to return adapter->max_io_queues
  so that ethtool -l returns the correct maximum queue number.

- Change the name of ena_calc_io_queue_num() to
  ena_calc_max_io_queue_num() as it returns the maximum number of io
  queues and actual number of queues can be smaller if changed
  by ethtool -L which is implemented in a later commit.

- Change variable name from io_queue_num to max_num_io_queues in
  ena_calc_max_io_queue_num() and ena_probe().

- Make all types of variables that convey the number and sizeof queues
  to be u32, for consistency with the API between the driver and the
  device.

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we use the same IRQ and NAPI to service RX and TX then we need to
use a combined channel instead of rx and tx channels.

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Rename ena_calc_queue_size() to ena_calc_io_queue_size() for clarity
  and consistency
- Remove redundant number of io queues parameter in functions
  ena_enable_msix() and ena_enable_msix_and_set_admin_interrupts(),
  which already get adapter parameter, so use adapter->num_io_queues
  in the function instead.
- Use the local variable ena_dev instead of ctx->ena_dev in
  ena_calc_io_queue_size
- Fix multi row comment alignments

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most places in the code refer to the IO queues as io_queues and not
simply queues. Examples - max_io_queues_per_vf, ENA_MAX_NUM_IO_QUEUES,
ena_destroy_all_io_queues() etc..

We are also adding the new max_num_io_queues field to struct ena_adapter
in the following commit.

The changes included in this commit are:
struct ena_adapter->num_queues => struct ena_adapter->num_io_queues

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel T. Lee says:

====================
samples: pktgen: allow to specify destination IP range

Currently, pktgen script supports specify destination port range.

To further extend the capabilities, this commit allows to specify destination
IP range with CIDR when running pktgen script.

Specifying destination IP range will be useful on various situation such as
testing RSS/RPS with randomizing n-tuple.

This patchset fixes the problem with checking the command result on proc_cmd,
and add feature to allow destination IP range.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, kernel pktgen has the feature to specify destination
address range for sending packet. (e.g. pgset "dst_min/dst_max")

But on samples, each pktgen script doesn't have any option to achieve this.

This commit adds the feature to specify the destination address range with CIDR.

    -d : ($DEST_IP)   destination IP. CIDR (e.g. 198.18.0.0/15) is also allowed

    # ./pktgen_sample01_simple.sh -6 -d fe80::20/126 -p 3000 -n 4
    # tcpdump ip6 and udp
    05:14:18.082285 IP6 fe80::99.71 > fe80::23.3000: UDP, length 16
    05:14:18.082564 IP6 fe80::99.43 > fe80::23.3000: UDP, length 16
    05:14:18.083366 IP6 fe80::99.107 > fe80::22.3000: UDP, length 16
    05:14:18.083585 IP6 fe80::99.97 > fe80::21.3000: UDP, length 16

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds CIDR parsing and IP validate helper function to parse
single IP or range of IP with CIDR. (e.g. 198.18.0.0/15)

Validating the address should be preceded prior to the parsing.
Helpers will be used in prior to set target address in samples/pktgen.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, proc_cmd is used to dispatch command to 'pg_ctrl', 'pg_thread',
'pg_set'. proc_cmd is designed to check command result with grep the
"Result:", but this might fail since this string is only shown in
'pg_thread' and 'pg_set'.

This commit fixes this logic by grep-ing the "Result:" string only when
the command is not for 'pg_ctrl'.

For clarity of an execution flow, 'errexit' flag has been set.

To cleanup pktgen on exit, trap has been added for EXIT signal.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit changes variable names that can cause confusion.

For example, variable DST_MIN is quite confusing since the
keyword 'udp_dst_min' and keyword 'dst_min' is used with pg_ctrl.

On the following commit, 'dst_min' will be used to set destination IP,
and the existing variable name DST_MIN should be changed.

Variable names are matched to the exact keyword used with pg_ctrl.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
netdevsim: implement devlink dev_info op

Initial implementation of devlink dev_info op - just driver name is
filled up and sent to user. Bundled with selftest.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Add test to verify netdevsim driver name returned by devlink dev info.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do simple dev_info devlink operation implementation which only fills up
the driver name.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order for attrs to be prepared for reporter dump dumpit callback,
set GENL_DONT_VALIDATE_DUMP_STRICT instead of GENL_DONT_VALIDATE_DUMP.

Fixes: ee85da53

 ("devlink: have genetlink code to parse the attrs during dumpit"
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Improvements for -next

Improvements for -next. More info in commit logs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

GMAC4+ cores support Layer 3 and Layer 4 filtering. Add the
corresponding callbacks in these cores.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>