- Apr 26, 2016
-
-
Vladimir Murzin authored
Application Notes 399 and 400 shares the same memory map and features. Both are shipped with Cortex-M7 and have the same peripheral as AN385/AN386, but with different location of PSRAM and Ethernet controller. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-
Vladimir Murzin authored
Application Notes 385 and 386 shares the same memory map and features except the CPU is used. AN385 is supplied with Cortex-M3 CPU and AN386 is supplied with Cortex-M4. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-
- Apr 21, 2016
-
-
Srinivas Kandagatla authored
This patch adds support to DB600c with basic serial ports. DB600c is based on APQ8064. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
- Apr 20, 2016
-
-
Matthew McClintock authored
Initial board support dts files for DK01 board. Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
- Apr 15, 2016
-
-
Nishanth Menon authored
DRA72-EVM now has an upgrade to Rev C with SR2.0 silicon. As part of this change, a few updates were factored in that were software incompatible with previous board in few areas: - We now use DP83867 ethernet phy instead of older DP838865 which fails in certain use cases. - Two Ethernet ports now instead of the single one in rev B. - polarities changed for certain pcf gpios - Due to SoC phy current requirements, VDDA supplies are split between ldo3 and ldo2 (ldo2 was previously unused). NOTE: DSS (VDDA_VIDEO) is still supplied by ldo5, HDMI is now supplied by LDO2 instead of using LDO3. NOTE: It does not make much sense to spin off a new board compatible flag since there is no real benefit for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Bert Vermeulen authored
This platform is based on a Marvell 88E6282 SoC and 88E6171 switch. [gregory.clement@free-electrons.com: fix block comment style] Signed-off-by: Bert Vermeulen <bert@biot.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Roger Shimizu authored
Add dts file to support Buffalo/Revogear Kurobox-Pro, which is marvell orion5x based 3.5" HDD NAS. It's a quite old product and already discontinued. So there's no official website for it. But it was an early product which used marvell orion5x 88F5182 chipset, it's popular in the community. Some unofficial site: - http://buffalo.nas-central.org/wiki/Category:KuroboxPro - http://nice.kaze.com/KUROPRO_ProductSpecifications.pdf This device tree is based on the board file: arch/arm/mach-orion5x/kurobox_pro-setup.c However, the probing order of NAND and JEDEC-Flash are different from the original board file, this results in incompatible minor number for a few /dev/mtdX and /dev/mtdblockX devices. So I still want to keep the board file for the time being. Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
- Apr 13, 2016
-
-
Nishanth Menon authored
As reported in [1], rename the k2* dts files to keystone-* files this will force consistency throughout. Script for the same (and hand modified for Makefile and MAINTAINERS files): for i in arch/arm/boot/dts/k2* do b=`basename $i`; git mv $i arch/arm/boot/dts/keystone-$b; sed -i -e "s/$b/keystone-$b/g" arch/arm/boot/dts/*[si] done NOTE: bootloaders that depend on older dtb names will need to be updated as well. [1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2 Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
-
Cory Tusar authored
This commit adds support for Rev. B of a Zodiac Inflight Innovations development board, mainly intended for DSA and ARINC 429 development work. Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Introduce imx6sx-sdb-sai.dts so that it is possible to use the SAI interface. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Gary Bisson authored
Based on i.MX6 SoloX with 1GB of RAM. https://boundarydevices.com/product/nit6_solox-imx6/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
This baseboard can be used with all TX6 SoMs, but only a certain set of combinations can be ordered by default. Add support for these combinations in mainline, so that users can easily adopt their own combination of SoM and baseboard themselves. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Add support for the following i.MX6 based modules from Ka-Ro electronics GmbH: TX6S-8034: Processor Freescale i.MX 6 Solo, 800MHz RAM 256MiB DDR3 SDRAM ROM 128MiB NAND Flash Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6S-8035: Processor Freescale i.MX 6 Solo, 800MHz RAM 512MiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6U-8033: Processor Freescale i.MX 6 Dual Lite, 800MHz RAM 1GiB DDR3 SDRAM ROM 4GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range industrial grade (-40°C/-25°C to 105°C Tj) TX6Q-1036: Processor Freescale i.MX 6Quad, 1GHz RAM 1GB DDR3 SDRAM 64-bit ROM 8GiB eMMC Power supply Single 3.1V to 5.5V Size 31mm SO-DIMM Temp. Range Extended Consumer Grade (-20°C to 105°C Tj) Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Gary Bisson authored
Based on i.MX6 Quad Plus with 4GB of RAM. https://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lothar Waßmann authored
The TXUL-0010/-0011 modules are Computers On Module manufactured by Ka-Ro electronics GmbH with the following characteristics: Processor Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz RAM 256MB 16-bit DDR3 SDRAM ROM 128MB NAND Flash (TXUL-0010) / 4GB eMMC (TXUL-0011) Power supply Single 3.3 to 5V Size 26mm SO-DIMM Temp. Range -40°C to 85°C Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Paul Kocialkowski authored
The Amazon Kindle Fire (first generation) codename kc1 is a tablet that was released by Amazon back in 2011. It is using an OMAP4430 SoC GP version. This adds devicetree support for the device, with only a few basic features supported, such as debug uart, i2c and internal emmc. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Schuyler Patton authored
The AM572x-IDK board is a board based on TI's AM5728 SOC which has a dual core 1.5GHz A15 processor. This board is a development platform for the Industrial market with: - 2GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5728 This patch creates a common dtsi file that will provide a common board dtsi file to define the nodes that are common to AM57xx (including the upcoming AM5718) IDK boards. Initial support is only for basic peripherals Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Lokesh Vutla authored
TI's Industrial Communication Engine EVM is a low cost hardware mainly developed for industrial communication type applications using serial or Ethernet based interfaces. This platform features TI's AM3359 with 800MHz single core Cortex-A8 processor, 256MB DDR3, 64MB SPI flash, 8MB NOR Flash, mmc, usb, can, dual Ethernet ports. For more information, look at HW user guide[1], Data manual[2]. Just add basic support for the moment. [1] http://processors.wiki.ti.com/index.php/AM335x_Industrial_Communication_Engine_EVM_Rev2_1_HW_User_Guide [2] http://www.ti.com/lit/ds/symlink/am3359.pdf Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- Apr 04, 2016
-
-
Linus Walleij authored
This adds a devicetree for the ARM RealView PBA8 platform, also known as HBI-0178, "RealView Platform Baseboard for Cortex-A8" and PBX-A9 "RealView Platform Baseboard Explore for Cortex-A9" Tested in QEMU with -M realview-pb-a8, as well as with -M realview-pbx-a9 -smp cpus=2 Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The ARM RealView Evaluation Baseboards are basically these: - The original ARMv5 EB board with an ARM926EJ-S, ARM1136 or ARM1176 core tile here described in arm-realview-eb.dts no matter which of these core tiles is being used. This can be emulated by QEMU "realview-eb" machine, which by default will have the ARM926EJ-S core tile. - The same board with one of three MPCore Core tiles: ARM11MPCore, not to be confused with the similar ARM PB11MPCore ARM11MPCore test system. This exist in two revisions: - Revision A modeled in arm-realview-eb-11mp.dts - Revision B modeled arm-realview-eb-11mp-revb.dts Revision B can be emulated by the QEMU "realview-eb-mpcore" machine, but to match the hardware also the argument -smp cpus=4 must be passed so that it has four CPU cores, like the hardware. There is also evidently from the code in the kernel a Cortex-A9 core tile for the EB, and this is modeled in arm-realview-eb-a9mp.dts based on the kernel boardfile. I have not found a user guide for this EB core tile on the ARM website and it seems uncommon. It is however included for completeness. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- Apr 01, 2016
-
-
Chanwoo Choi authored
This patch adds the Device Tree source for Samsung ARTIK5 module[1] based on Exynos3250 SoC. The ARTIK5 module includes the following devices: - Application Processor (Samsung Exynos3250) - WiFi/BT Combo chip (Broadcom4354) - PMIC (Samsung S2MPS14) - eMMC (4GB) - DRAM LPDDR3 (512MB) - Connectors pin (60 Pins x 3 set) Also, this patch adds the ARTIK5 evaluation board[2] dts file which includes the ARTIK5 module[1] and have the devices such as sound codec, sd card port, ethernet port, uart port and so on. [1] https://www.artik.io/hardware/artik-5 [2] http://www.digikey.com/product-search/en?FV=ffecca14 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
-
- Mar 30, 2016
-
-
Heinrich Schuchardt authored
Commit be3d7d02 ("ARM: kirkwood: Add DTS file for NSA320") created the new file kirkwood-nsa320.dts but did not add it to the Makefile. Fixes: be3d7d02 ("ARM: kirkwood: Add DTS file for NSA320") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
Heinrich Schuchardt authored
Commit 2d0a7add ("ARM: Kirkwood: Add support for many Synology NAS devices") created the new file kirkwood-ds112.dts but did not add it to the Makefile. Fixes: 2d0a7add ("ARM: Kirkwood: Add support for many Synology NAS devices") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-
- Mar 19, 2016
-
-
Masahiro Yamada authored
Initial commit for PH1-Pro4 Sanji board support. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Masahiro Yamada authored
Initial commit for PH1-Pro4 Ace board support. Note: There are two variants for the amount of DDR memory; 1GB or 2GB. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- Mar 01, 2016
-
-
Paul Kocialkowski authored
The LG Optimus Black codename sniper is a smartphone that was designed and manufactured by LG Electronics (LGE) and released back in 2011. It is using an OMAP3630 SoC, GP version. This adds devicetree support for the device, with only a few basic features supported, such as debug uart, i2c, internal emmc and external mmc. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- Feb 29, 2016
-
-
Akshay Bhat authored
Add support for Advantech/GE B850v3 board. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Akshay Bhat authored
Add support for Advantech/GE B650v3 board. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Akshay Bhat authored
Add support for Advantech/GE B450v3 board. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Petr Štetiar authored
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Joshua Clayton authored
Uniwest evi is a portable electrical eddy current non-destructive testing device. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Bai Ping authored
This patch adds dts file for imx6qp-sabresd board. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Bai Ping authored
This patch adds basic dts file for i.MX6QP-Sbreauto board. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Michael Trimarchi authored
www.engicam.com/en/products/embedded/som/standard/i-core-rqs-m6s-dl-d-q Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- Feb 26, 2016
-
-
Jelle de Jong authored
The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Vitaly Andrianov authored
Add barebones K2G evm dts. This DTS allows the board to boot using a ram based filesystem. The technical reference manual for K2G can be found here: http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
-
- Feb 25, 2016
-
-
Lars Persson authored
Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- Feb 24, 2016
-
-
John Stultz authored
This patch adds a dts file to support the Nexus7 2013 device. Its based off of the qcom-apq8064-ifc6410.dts which is similar hardware. Also includes some comments and context folded in from Vinay Simha BN <simhavcs@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
- Feb 18, 2016
-
-
Lee Jones authored
It's pretty similar to the STM32F429, but there are some subtle changes required to boot successfully. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
-