this is the big move: flip over VISWS to generic arch support.

From this commit on CONFIG_X86_VISWS is just another (default-disabled)
option that turns on certain quirks - no other complications.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

copy arch/x86/mach-visws/setup_visws.c, apic_visws.c and traps_visws.c
files to arch/x86/kernel/, in preparation of the switchover to a
non-subarch setup for VISWS.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

add early quirk support to the generic architecture code.

this allows VISWS to be supported by the generic code and allows us
to remove the VISWS subarch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

NR_IRQS: let VISWS be just a sub-case of the generic code.

This can create a somewhat larger irq_desc[] array if NR_CPUS is high
but that should not worry VisWS which has 4 CPUs at most.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

use the generic version of setup_arch.h - it's the same.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

move the SGIVW definitions from setup_arch.h into its own header file.

preparation for turning VISWS into a generic PC architecture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

move the include/asm-x86/mach-visws/ VISWS specific hardware
details include files into include/asm-x86/visws, to be used from
generic code.

No code changed.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Ingo Molnar <mingo@elte.hu>

update asm-x86/mach-visws/mach_apicdef.h to the generic version.

This should work fine as VISWS has a standard local APIC and thus
its mach_apicdef.h copy is just an ancient version of the generic code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

now that include/asm-x86/mach-visws/smpboot_hooks.h equals
to the default file in ../mach-default/smpboot_hooks.h, simply
include it instead of maintaining a copy.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

update include/asm-x86/mach-visws/smpboot_hooks.h to
include/asm-x86/mach-default/smpboot_hooks.h (the generic version).

this _should_ work, because VISWS sets skip_ioapic_setup, but it
should be tested on a real VISWS to make sure.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Allow the generic smpboot quirks code to be built with
ONFIG_X86_IO_APIC disabled. This way VISWS will be able
to use it as-is.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

now that include/asm-x86/mach-visws/mach_apic.h equals
to include/asm-x86/mach-default/mach_apic.h, simply start
using the generic one.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

update asm-x86/mach-visws/mach_apic.h to the generic version.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Ingo Molnar <mingo@elte.hu>

add early init quirks for VisWS. This gradually turns the VISWS subarch
into a generic PC architecture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

first step: make the VISWS subarch boot on a regular PC.

We take various shortcuts for that. We copy the generic arch setup file over
into the VISWS setup file.

This is the only step that is not expected to boot on a real VISWS.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add early quirks support.

In preparation of enabling the generic architecture to boot on a VISWS.

This will allow us to remove the VISWS subarch and all its complications.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

these two sub-architectures want PCI to be default-on, not default-off.

Reported-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

When an interrupt is rerouted to a different I/O APIC pin the relevant
entry of the irq_2_pin list should get updated accordingly so that
operations are performed on the correct redirection entry.

This is already done by the 32-bit variation of the code and here is a
complementing 64-bit implementation.  Should make someone's decision less
tough when merging the two. ;)

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This reverts commit 90221a61a71b7ad659d8741cf1e404506b174982.

This too was just temporary diagnostics - not needed now that we've
got the final fix via:

| commit e2079c43


| Author: Rafael J. Wysocki <rjw@sisk.pl>
| Date:   Tue Jul 8 16:12:26 2008 +0200
|
|     x86: fix C1E && nx6325 stability problem

Signed-off-by: Ingo Molnar <mingo@elte.hu>

This reverts commit a74a1cc3df0be89658bc735c8aed80c8392e2c15.

This was just temporary diagnostics commit - not needed now that we've
got the final fix.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

AMD_IOMMU should depend on IOMMU_HELPER since they are the IOMMU
helper functions. SWIOTLB requires IOMMU_HELPER so declaring that
AMD_IOMMU depends on SWIOTLB properly fixes the problems.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

This remove lots of duplications in iommu.h and gart.h.

The end result of this patch is:

- iommu.h is a header file for everyone related with IOMMUs.

- gart.h is the private header file. Only pci-gart_64.c and its friends
  include it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: fujita.tomonori@lab.ntt.co.jp
Signed-off-by: Ingo Molnar <mingo@elte.hu>

even on 64bit systems with less than 4G RAM, we can now use fixmap
to handle acpi SIT near end of ram.

change e820_end to e820_end_of_ram again?
or e820_ram_pfn?

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

and let 64-bit to fall back to use fixmap too.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix phys_pmd_init to make sure not to return bigger value than end.

also print out range split:1G/2M/4K in init_memory_mapping().

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix:

 arch/x86/kernel/built-in.o: In function `dmi_ignore_irq0_timer_override':
 boot.c:(.init.text+0x3ea4): undefined reference to `force_mask_ioapic_irq_2'

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Switch copy_user_generic_string(), copy_user_generic_unrolled() and
__copy_user_nocache() from custom tail handlers to generic
copy_user_tail_handle().

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Introduce generic C routine for handling necessary tail operations after
protection fault in copy_*_user on x86.

Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: akpm@linux-foundation.org
Cc: andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

to avoid warning from find_low_pfn_range for high pages size etc

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

So far subsys_initcalls has been executed in this order depending on
the object order in the Makefile:

arch/x86/pci/visws.c:subsys_initcall(pcibios_init);
arch/x86/pci/numa.c:subsys_initcall(pci_numa_init);
arch/x86/pci/acpi.c:subsys_initcall(pci_acpi_init);
arch/x86/pci/legacy.c:subsys_initcall(pci_legacy_init);
arch/x86/pci/irq.c:subsys_initcall(pcibios_irq_init);
arch/x86/pci/common.c:subsys_initcall(pcibios_init);

This patch removes the ordering dependency. There is now only one
subsys_initcall function that contains subsystem initialization code
with a defined order.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>