- Feb 17, 2021
-
-
Rafael J. Wysocki authored
commit d11a1d08 upstream. If the maximum performance level taken for computing the arch_max_freq_ratio value used in the x86 scale-invariance code is higher than the one corresponding to the cpuinfo.max_freq value coming from the acpi_cpufreq driver, the scale-invariant utilization falls below 100% even if the CPU runs at cpuinfo.max_freq or slightly faster, which causes the schedutil governor to select a frequency below cpuinfo.max_freq. That frequency corresponds to a frequency table entry below the maximum performance level necessary to get to the "boost" range of CPU frequencies which prevents "boost" frequencies from being used in some workloads. While this issue is related to scale-invariance, it may be amplified by commit db865272 ("cpufreq: Avoid configuring old governors as default with intel_pstate") from the 5.10 development cycle which made it extremely easy to default to schedutil even if the preferred driver is acpi_cpufreq as long as intel_pstate is built too, because the mere presence of the latter effectively removes the ondemand governor from the defaults. Distro kernels are likely to include both intel_pstate and acpi_cpufreq on x86, so their users who cannot use intel_pstate or choose to use acpi_cpufreq may easily be affectecd by this issue. If CPPC is available, it can be used to address this issue by extending the frequency tables created by acpi_cpufreq to cover the entire available frequency range (including "boost" frequencies) for each CPU, but if CPPC is not there, acpi_cpufreq has no idea what the maximum "boost" frequency is and the frequency tables created by it cannot be extended in a meaningful way, so in that case make it ask the arch scale-invariance code to to use the "nominal" performance level for CPU utilization scaling in order to avoid the issue at hand. Fixes: db865272 ("cpufreq: Avoid configuring old governors as default with intel_pstate") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit 3c55e94c upstream. A severe performance regression on AMD EPYC processors when using the schedutil scaling governor was discovered by Phoronix.com and attributed to the following commits: 41ea6672 ("x86, sched: Calculate frequency invariance for AMD systems") 976df7e5 ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC") The source of the problem is that the maximum performance level taken for computing the arch_max_freq_ratio value used in the x86 scale- invariance code is higher than the one corresponding to the cpuinfo.max_freq value coming from the acpi_cpufreq driver. This effectively causes the scale-invariant utilization to fall below 100% even if the CPU runs at cpuinfo.max_freq or slightly faster, so the schedutil governor selects a frequency below cpuinfo.max_freq then. That frequency corresponds to a frequency table entry below the maximum performance level necessary to get to the "boost" range of CPU frequencies. However, if the cpuinfo.max_freq value coming from acpi_cpufreq was higher, the schedutil governor would select higher frequencies which in turn would allow acpi_cpufreq to set more adequate performance levels and to get to the "boost" range of CPU frequencies more often. This issue affects any systems where acpi_cpufreq is used and the "boost" (or "turbo") frequencies are enabled, not just AMD EPYC. Moreover, commit db865272 ("cpufreq: Avoid configuring old governors as default with intel_pstate") from the 5.10 development cycle made it extremely easy to default to schedutil even if the preferred driver is acpi_cpufreq as long as intel_pstate is built too, because the mere presence of the latter effectively removes the ondemand governor from the defaults. Distro kernels are likely to include both intel_pstate and acpi_cpufreq on x86, so their users who cannot use intel_pstate or choose to use acpi_cpufreq may easily be affectecd by this issue. To address this issue, extend the frequency table constructed by acpi_cpufreq for each CPU to cover the entire range of available frequencies (including the "boost" ones) if CPPC is available and indicates that "boost" (or "turbo") frequencies are enabled. That causes cpuinfo.max_freq to become the maximum "boost" frequency of the given CPU (instead of the maximum frequency returned by the ACPI _PSS object that corresponds to the "nominal" performance level). Fixes: 41ea6672 ("x86, sched: Calculate frequency invariance for AMD systems") Fixes: 976df7e5 ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC") Fixes: db865272 ("cpufreq: Avoid configuring old governors as default with intel_pstate") Link: https://www.phoronix.com/scan.php?page=article&item=linux511-amd-schedutil&num=1 Link: https://lore.kernel.org/linux-pm/20210203135321.12253-2-ggherdovich@suse.cz/ Reported-by: Michael Larabel <Michael@phoronix.com> Diagnosed-by: Giovanni Gherdovich <ggherdovich@suse.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz> Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz> Tested-by: Michael Larabel <Michael@phoronix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vladimir Oltean authored
commit 8fd54a73 upstream. Since teardown is supposed to undo the effects of the setup method, it should be called in the error path for dsa_switch_setup, not just in dsa_switch_teardown. Fixes: 5e3f847a ("net: dsa: Add teardown callback for drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210204163351.2929670-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Willem de Bruijn authored
commit 52cbd23a upstream. When iteratively computing a checksum with csum_block_add, track the offset "pos" to correctly rotate in csum_block_add when offset is odd. The open coded implementation of skb_copy_and_csum_datagram did this. With the switch to __skb_datagram_iter calling csum_and_copy_to_iter, pos was reinitialized to 0 on each call. Bring back the pos by passing it along with the csum to the callback. Changes v1->v2 - pass csum value, instead of csump pointer (Alexander Duyck) Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/ Fixes: 950fcaec ("datagram: consolidate datagram copy to iter helpers") Reported-by: Oliver Graute <oliver.graute@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
commit 7b5eab57 upstream. At the end of rxrpc_release_call(), rxrpc_cleanup_ring() is called to clear the Rx/Tx skbuff ring, but this doesn't lock the ring whilst it's accessing it. Unfortunately, rxrpc_resend() might be trying to retransmit a packet concurrently with this - and whilst it does lock the ring, this isn't protection against rxrpc_cleanup_call(). Fix this by removing the call to rxrpc_cleanup_ring() from rxrpc_release_call(). rxrpc_cleanup_ring() will be called again anyway from rxrpc_cleanup_call(). The earlier call is just an optimisation to recycle skbuffs more quickly. Alternative solutions include rxrpc_release_call() could try to cancel the work item or wait for it to complete or rxrpc_cleanup_ring() could lock when accessing the ring (which would require a bh lock). This can produce a report like the following: BUG: KASAN: use-after-free in rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372 Read of size 4 at addr ffff888011606e04 by task kworker/0:0/5 ... Workqueue: krxrpcd rxrpc_process_call Call Trace: ... kasan_report.cold+0x79/0xd5 mm/kasan/report.c:413 rxrpc_send_data_packet+0x19b4/0x1e70 net/rxrpc/output.c:372 rxrpc_resend net/rxrpc/call_event.c:266 [inline] rxrpc_process_call+0x1634/0x1f60 net/rxrpc/call_event.c:412 process_one_work+0x98d/0x15f0 kernel/workqueue.c:2275 ... Allocated by task 2318: ... sock_alloc_send_pskb+0x793/0x920 net/core/sock.c:2348 rxrpc_send_data+0xb51/0x2bf0 net/rxrpc/sendmsg.c:358 rxrpc_do_sendmsg+0xc03/0x1350 net/rxrpc/sendmsg.c:744 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:560 ... Freed by task 2318: ... kfree_skb+0x140/0x3f0 net/core/skbuff.c:704 rxrpc_free_skb+0x11d/0x150 net/rxrpc/skbuff.c:78 rxrpc_cleanup_ring net/rxrpc/call_object.c:485 [inline] rxrpc_release_call+0x5dd/0x860 net/rxrpc/call_object.c:552 rxrpc_release_calls_on_socket+0x21c/0x300 net/rxrpc/call_object.c:579 rxrpc_release_sock net/rxrpc/af_rxrpc.c:885 [inline] rxrpc_release+0x263/0x5a0 net/rxrpc/af_rxrpc.c:916 __sock_release+0xcd/0x280 net/socket.c:597 ... The buggy address belongs to the object at ffff888011606dc0 which belongs to the cache skbuff_head_cache of size 232 Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Reported-by: <syzbot+174de899852504e4a74a@syzkaller.appspotmail.com> Reported-by: <syzbot+3d1c772efafd3c38d007@syzkaller.appspotmail.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> Link: https://lore.kernel.org/r/161234207610.653119.5287360098400436976.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Catalin Marinas authored
commit 68d54cee upstream. The ptrace(PTRACE_PEEKMTETAGS) implementation checks whether the user page has valid tags (mapped with PROT_MTE) by testing the PG_mte_tagged page flag. If this bit is cleared, ptrace(PTRACE_PEEKMTETAGS) returns -EIO. A newly created (PROT_MTE) mapping points to the zero page which had its tags zeroed during cpu_enable_mte(). If there were no prior writes to this mapping, ptrace(PTRACE_PEEKMTETAGS) fails with -EIO since the zero page does not have the PG_mte_tagged flag set. Set PG_mte_tagged on the zero page when its tags are cleared during boot. In addition, to avoid ptrace(PTRACE_PEEKMTETAGS) succeeding on !PROT_MTE mappings pointing to the zero page, change the __access_remote_tags() check to (vm_flags & VM_MTE) instead of PG_mte_tagged. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 34bfeea4 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE") Cc: <stable@vger.kernel.org> # 5.10.x Cc: Will Deacon <will@kernel.org> Reported-by: Luis Machado <luis.machado@linaro.org> Tested-by: Luis Machado <luis.machado@linaro.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20210210180316.23654-1-catalin.marinas@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 70245f86 upstream. Invoking x86_init.irqs.create_pci_msi_domain() before x86_init.pci.arch_init() breaks XEN PV. The XEN_PV specific pci.arch_init() function overrides the default create_pci_msi_domain() which is obviously too late. As a consequence the XEN PV PCI/MSI allocation goes through the native path which runs out of vectors and causes malfunction. Invoke it after x86_init.pci.arch_init(). Fixes: 6b15ffa0 ("x86/irq: Initialize PCI/MSI domain at PCI init time") Reported-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87pn18djte.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rolf Eike Beer authored
commit fe968c41 upstream. Fixes: 2cea4a7a ("scripts: use pkg-config to locate libcrypto") Signed-off-by: Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org # 5.6.x Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
[ Upstream commit ade9679c ] Fix a build error for undefined 'TI_PRE_COUNT' by adding it to asm-offsets.c. h8300-linux-ld: arch/h8300/kernel/entry.o: in function `resume_kernel': (.text+0x29a): undefined reference to `TI_PRE_COUNT' Link: https://lkml.kernel.org/r/20210212021650.22740-1-rdunlap@infradead.org Fixes: df2078b8 ("h8300: Low level entry") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alain Volmat authored
[ Upstream commit 3d6a3d3a ] The digital filter related computation are present in the driver however the programming of the filter within the IP is missing. The maximum value for the DNF is wrong and should be 15 instead of 16. Fixes: aeb068c5 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jernej Skrabec authored
[ Upstream commit 245090ab ] CLK_SET_RATE_PARENT flag is checked on parent clock instead of current one. Fix that. Fixes: 3f790433 ("clk: sunxi-ng: Adjust MP clock parent rate when allowed") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20210209175900.7092-2-jernej.skrabec@siol.net Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jernej Skrabec authored
[ Upstream commit 1926a050 ] It turns out that reasoning for lowering max. supported frequency is wrong. Scrambling works just fine. Several now fixed bugs prevented proper functioning, even with rates lower than 340 MHz. Issues were just more pronounced with higher frequencies. Fix that by allowing max. supported frequency in HW and fix the comment. Fixes: cd906375 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.net Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jernej Skrabec authored
[ Upstream commit 6a155216 ] As it turns out, vendor HDMI PHY driver for H6 has a pretty big table of predefined values for various pixel clocks. However, most of them are not useful/tested because they come from reference driver code. Vendor PHY driver is concerned with only few of those, namely 27 MHz, 74.25 MHz, 148.5 MHz, 297 MHz and 594 MHz. These are all frequencies for standard CEA modes. Fix sun50i_h6_cur_ctr and sun50i_h6_phy_config with the values only for aforementioned frequencies. Table sun50i_h6_mpll_cfg doesn't need to be changed because values are actually frequency dependent and not so much SoC dependent. See i.MX6 documentation for explanation of those values for similar PHY. Fixes: c71c9b2f ("drm/sun4i: Add support for Synopsys HDMI PHY") Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-5-jernej.skrabec@siol.net Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jernej Skrabec authored
[ Upstream commit 36b53581 ] As expected, HDMI controller clock should always match pixel clock. In the past, changing HDMI controller rate would seemingly worsen situation. However, that was the result of other bugs which are now fixed. Fix that by removing set_rate quirk and always set clock rate. Fixes: 40bb9d31 ("drm/sun4i: Add support for H6 DW HDMI controller") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-4-jernej.skrabec@siol.net Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jernej Skrabec authored
[ Upstream commit 50791f5d ] Channel 1 has polarity bits for vsync and hsync signals but driver never sets them. It turns out that with pre-HDMI2 controllers seemingly there is no issue if polarity is not set. However, with HDMI2 controllers (H6) there often comes to de-synchronization due to phase shift. This causes flickering screen. It's safe to assume that similar issues might happen also with pre-HDMI2 controllers. Solve issue with setting vsync and hsync polarity. Note that display stacks with tcon top have polarity bits actually in tcon0 polarity register. Fixes: 9026e0d1 ("drm: Add Allwinner A10 Display Engine support") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fangrui Song authored
[ Upstream commit 793f49a8 ] arm64 references the start address of .builtin_fw (__start_builtin_fw) with a pair of R_AARCH64_ADR_PREL_PG_HI21/R_AARCH64_LDST64_ABS_LO12_NC relocations. The compiler is allowed to emit the R_AARCH64_LDST64_ABS_LO12_NC relocation because struct builtin_fw in include/linux/firmware.h is 8-byte aligned. The R_AARCH64_LDST64_ABS_LO12_NC relocation requires the address to be a multiple of 8, which may not be the case if .builtin_fw is empty. Unconditionally align .builtin_fw to fix the linker error. 32-bit architectures could use ALIGN(4) but that would add unnecessary complexity, so just use ALIGN(8). Link: https://lkml.kernel.org/r/20201208054646.2913063-1-maskray@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/1204 Fixes: 5658c769 ("firmware: allow firmware files to be built into kernel image") Signed-off-by: Fangrui Song <maskray@google.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Douglas Anderson <dianders@chromium.org> Acked-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yufeng Mo authored
[ Upstream commit 532cfc0d ] The index is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this index before using it in hclge_get_rss_key(). Fixes: a638b1d8 ("net: hns3: fix get VF RSS issue") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yufeng Mo authored
[ Upstream commit 326334aa ] The tqp_index is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this tqp_index before using it in hclge_get_ring_chain_from_mbx(). Fixes: 84e095d6 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yufeng Mo authored
[ Upstream commit 67a69f84 ] The queue_id is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this queue_id before using it in hclge_reset_vf_queue(). Fixes: 1a426f8b ("net: hns3: fix the VF queue reset flow error") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit eb4733d7 ] There are several issues which may be seen when the link goes down while forwarding traffic, all of which can be attributed to the fact that the port flushing procedure from the reference manual was not closely followed. With flow control enabled on both the ingress port and the egress port, it may happen when a link goes down that Ethernet packets are in flight. In flow control mode, frames are held back and not dropped. When there is enough traffic in flight (example: iperf3 TCP), then the ingress port might enter congestion and never exit that state. This is a problem, because it is the egress port's link that went down, and that has caused the inability of the ingress port to send packets to any other port. This is solved by flushing the egress port's queues when it goes down. There is also a problem when performing stream splitting for IEEE 802.1CB traffic (not yet upstre...
-
Borislav Petkov authored
[ Upstream commit 256b92af ] Commit 20bf2b37 ("x86/build: Disable CET instrumentation in the kernel") disabled CET instrumentation which gets added by default by the Ubuntu gcc9 and 10 by default, but did that only for 64-bit builds. It would still fail when building a 32-bit target. So disable CET for all x86 builds. Fixes: 20bf2b37 ("x86/build: Disable CET instrumentation in the kernel") Reported-by: AC <achirvasub@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: AC <achirvasub@gmail.com> Link: https://lkml.kernel.org/r/YCCIgMHkzh/xT4ex@arch-chirva.localdomain Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maurizio Lombardi authored
[ Upstream commit f852c596 ] The sdebug_q_arr pointer must be freed when the module is unloaded. $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888e1cfb0000 (size 4096): comm "modprobe", pid 165555, jiffies 4325987516 (age 685.194s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000458f4f5d>] 0xffffffffc06702d9 [<000000003edc4b1f>] do_one_initcall+0xe9/0x57d [<00000000da7d518c>] do_init_module+0x1d1/0x6f0 [<000000009a6a9248>] load_module+0x36bd/0x4f50 [<00000000ddb0c3ce>] __do_sys_init_module+0x1db/0x260 [<000000009532db57>] do_syscall_64+0xa5/0x420 [<000000002916b13d>] entry_SYSCALL_64_after_hwframe+0x6a/0xdf Fixes: 87c715dc ("scsi: scsi_debug: Add per_host_store option") Link: https://lore.kernel.org/r/20210208111734.34034-1-mlombard@redhat.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 07998281 ] The origin skip check needs to re-test the zone. Else, we might skip a colliding tuple in the reply direction. This only occurs when using 'directional zones' where origin tuples reside in different zones but the reply tuples share the same zone. This causes the new conntrack entry to be dropped at confirmation time because NAT clash resolution was elided. Fixes: 4e35c1cb ("netfilter: nf_nat: skip nat clash resolution for same-origin entries") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sukadev Bhattiprolu authored
[ Upstream commit ef66a1ea ] Normally we clear the failover_pending flag when processing the reset. But if we are unable to schedule a failover reset we must clear the flag ourselves. We could fail to schedule the reset if we are in PROBING state (eg: when booting via kexec) or because we could not allocate memory. Thanks to Cris Forno for helping isolate the problem and for testing. Fixes: 1d850493 ("powerpc/vnic: Extend "failover pending" window") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Tested-by: Cristobal Forno <cforno12@linux.ibm.com> Link: https://lore.kernel.org/r/20210203050802.680772-1-sukadev@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mohammad Athari Bin Ismail authored
[ Upstream commit f317e2ea ] When disable CBS, mode_to_use parameter is not updated even the operation mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore, when tc_setup_cbs() function is called to re-enable CBS, the operation mode of Tx Queue remains at DCB, which causing CBS fails to work. This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode() callback function. Fixes: 1f705bc6 ("net: stmmac: Add support for CBS QDISC") Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/1612447396-20351-1-git-send-email-yoong.siang.song@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vadim Fedorenko authored
[ Upstream commit 647b8dd5 ] PACKET_TX_TIMESTAMP is defined in if_packet.h but it is not included in test. Include it instead of <netpacket/packet.h> otherwise the error of redefinition arrives. Also fix the compiler warning about ambiguous control flow by adding explicit braces. Fixes: 8fe2f761 ("net-timestamp: expand documentation") Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/1612461034-24524-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 07bf34a5 ] Michael tried to enable Advanced Error Reporting through the ENETC's Root Complex Event Collector, and the system started spitting out single bit correctable ECC errors coming from the ENETC interfaces: pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0 fsl_enetc 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID) fsl_enetc 0000:00:00.0: device [1957:e100] error status/mask=00004000/00000000 fsl_enetc 0000:00:00.0: [14] CorrIntErr fsl_enetc 0000:00:00.1: PCIe Bus Error: severity=Corrected, type=Transaction Layer, (Receiver ID) fsl_enetc 0000:00:00.1: device [1957:e100] error status/mask=00004000/00000000 fsl_enetc 0000:00:00.1: [14] CorrIntErr Further investigating the port correctable memory error detect register (PCMEDR) shows that these AER errors have an associated SOURCE_ID of 6 (RFS/RSS): $ devmem 0x1f8010e10 32 0xC0000006 $ devmem 0x1f8050e10 32 0xC0000006 Discussion with the hardware design engineers reveals that on LS1028A, the hardware does not do initialization of that RFS/RSS memory, and that software should clear/initialize the entire table before starting to operate. That comes as a bit of a surprise, since the driver does not do initialization of the RFS memory. Also, the initialization of the Receive Side Scaling is done only partially. Even though the entire ENETC IP has a single shared flow steering memory, the flow steering service should returns matches only for TCAM entries that are within the range of the Station Interface that is doing the search. Therefore, it should be sufficient for a Station Interface to initialize all of its own entries in order to avoid any ECC errors, and only the Station Interfaces in use should need initialization. There are Physical Station Interfaces associated with PCIe PFs and Virtual Station Interfaces associated with PCIe VFs. We let the PF driver initialize the entire port's memory, which includes the RFS entries which are going to be used by the VF. Reported-by: Michael Walle <michael@walle.cc> Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20210204134511.2640309-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Andrea Parri (Microsoft) authored
[ Upstream commit 12bc8dfb ] Commit 44144185 ("hv_netvsc: Add validation for untrusted Hyper-V values") added validation to rndis_filter_receive_data() (and rndis_filter_receive()) which introduced NVSP_STAT_FAIL-scenarios where the count is not updated/reset. Fix this omission, and prevent similar scenarios from occurring in the future. Reported-by: Juan Vazquez <juvazq@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Fixes: 44144185 ("hv_netvsc: Add validation for untrusted Hyper-V values") Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20210203113602.558916-1-parri.andrea@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alex Elder authored
[ Upstream commit 1d23a56b ] In gsi_channel_setup(), we check to see if the configuration data contains any information about channels that are not supported by the hardware. If one is found, we abort the setup process, but the error code (ret) is not set in this case. Fix this bug. Fixes: 650d1603 ("soc: qcom: ipa: the generic software interface") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210204010655.15619-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xie He authored
[ Upstream commit 81b8be68 ] It's not meaningful to pass on LAPB error codes to HDLC code or other parts of the system, because they will not understand the error codes. Instead, use system-wide recognizable error codes. Fixes: f362e5fe ("wan/hdlc_x25: make lapb params configurable") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20210203071541.86138-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Juergen Gross authored
[ Upstream commit ec7d8e7d ] Since commit 23025393 ("xen/netback: use lateeoi irq binding") xenvif_rx_ring_slots_available() is no longer called only from the rx queue kernel thread, so it needs to access the rx queue with the associated queue held. Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com> Fixes: 23025393 ("xen/netback: use lateeoi irq binding") Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20210202070938.7863-1-jgross@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sven Auhagen authored
[ Upstream commit 8d6bca15 ] When updating the tcp or udp header checksum on port nat the function inet_proto_csum_replace2 with the last parameter pseudohdr as true. This leads to an error in the case that GRO is used and packets are split up in GSO. The tcp or udp checksum of all packets is incorrect. The error is probably masked due to the fact the most network driver implement tcp/udp checksum offloading. It also only happens when GRO is applied and not on single packets. The error is most visible when using a pppoe connection which is not triggering the tcp/udp checksum offload. Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 767d1216 ] Although hooks are released via call_rcu(), chain and rule objects are immediately released while packets are still walking over these bits. This patch adds the .pre_exit callback which is invoked before synchronize_rcu() in the netns framework to stay safe. Remove a comment which is not valid anymore since the core does not use synchronize_net() anymore since 8c873e21 ("netfilter: core: free hooks with call_rcu"). Suggested-by: Florian Westphal <fw@strlen.de> Fixes: df05ef87 ("netfilter: nf_tables: release objects on netns destruction") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fabian Frederick authored
[ Upstream commit a3005b0f ] use date %Y instead of %G to read current year Problem appeared when running lkp-tests on 01/01/2021 Fixes: 48d072c4 ("selftests: netfilter: add time counter check") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jozsef Kadlecsik authored
[ Upstream commit b1bdde33 ] When both --reap and --update flag are specified, there's a code path at which the entry to be updated is reaped beforehand, which then leads to kernel crash. Reap only entries which won't be updated. Fixes kernel bugzilla #207773. Link: https://bugzilla.kernel.org/show_bug.cgi?id=207773 Reported-by: Reindl Harald <h.reindl@thelounge.net> Fixes: 0079c5ae ("netfilter: xt_recent: add an entry reaper") Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bui Quang Minh authored
[ Upstream commit 6183f4d3 ] On 32-bit architecture, roundup_pow_of_two() can return 0 when the argument has upper most bit set due to resulting 1UL << 32. Add a check for this case. Fixes: d5a3b1f6 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210127063653.3576-1-minhquangbui99@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexei Starovoitov authored
[ Upstream commit 548f1191 ] The commit 0d00449c ("x86: Replace ist_enter() with nmi_enter()") converted do_int3 handler to be "NMI-like". That made old if (in_nmi()) check abort execution of bpf programs attached to kprobe when kprobe is firing via int3 (For example when kprobe is placed in the middle of the function). Remove the check to restore user visible behavior. Fixes: 0d00449c ("x86: Replace ist_enter() with nmi_enter()") Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/bpf/20210203070636.70926-1-alexei.starovoitov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dave Jiang authored
[ Upstream commit 89e3becd ] Add device state check before executing command. Without the check the command can be issued while device is in halt state and causes the driver to block while waiting for the completion of the command. Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Fixes: 0d5c10b4 ("dmaengine: idxd: add work queue drain support") Link: https://lore.kernel.org/r/161219313921.2976211.12222625226450097465.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxime Ripard authored
[ Upstream commit facd93f4 ] Commit 0a038c1c ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") changed the LBM allocation logic from first allocating the LBM memory for the plane to running mode_set, adding a gap in the LBM, and then running the dlist allocation filling that gap. The gap was introduced by incrementing the dlist array index, but was never checking whether or not we were over the array length, leading eventually to memory corruptions if we ever crossed this limit. vc4_dlist_write had that logic though, and was reallocating a larger dlist array when reaching the end of the buffer. Let's share the logic between both functions. Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Eric Anholt <eric@anholt.net> Fixes: 0a038c1c ("drm/vc4: Move LBM creation out of vc4_plane_mode_set()") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129160647.128373-1-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lorenzo Bianconi authored
[ Upstream commit 93a1d479 ] Fix a memory leak in mt76_add_fragment routine returning the buffer to the page_frag_cache when we receive a new fragment and the skb_shared_info frag array is full. Fixes: b102f0c5 ("mt76: fix array overflow on receiving too many fragments for a packet") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/4f9dd73407da88b2a552517ce8db242d86bf4d5c.1611616130.git.lorenzo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
-