- Sep 08, 2016
-
-
Andrej Rosano authored
Add support for Inverse Path USB armory board, an open source flash-drive sized computer based on NXP i.MX53 SoC. https://inversepath.com/usbarmory Signed-off-by: Andrej Rosano <andrej@inversepath.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- Sep 05, 2016
-
-
Michael Trimarchi authored
IMX6UL GEA M6UL modules are system on module solutions manufactured by Engicam with following characteristics: Processor Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz RAM 128MB, 16-bit DDR3 NAND SLC 256MB Power supply Single 5V MAX LCD RES up to WXGA, 1366x768 and more info at http://www.engicam.com/prodotti/embedded/som/sodimm/gea-m6ul Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- Aug 15, 2016
-
-
Lucile Quirion authored
These device trees add support for TS-4900 by Technologic Systems. More details here: http://wiki.embeddedarm.com/wiki/TS-4900 Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Tim Harvey authored
The Gateworks Ventana GW553x is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * small form factor (35x70mm) * 512MB DDR3 DRAM (2x32bit) (options up to 2GB) * 256MB NAND flash (4GB option) * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCI socket (with PCIe, USB, SIM) * 1x microSD socket * 1x SIM socket * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * analog CVBS video in * GPS (optional uBlox EVA-M8M) * Application headers: - 2x TTL UART (TX/RX) - 4x TTL GPIO (3x configurable as PWM) - 3x CVBS Analog video input (1x decoder with 3x selectable inputs) * Front panel connectors: - micro-HDMI audio/video out - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG See http://www.gateworks.com for more info Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- Aug 09, 2016
-
-
Fabio Estevam authored
Add the initial support for the Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- Jul 18, 2016
-
-
Hans de Goede authored
The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Jul 15, 2016
-
-
Arnd Bergmann authored
Building both ARMv4 and ARMv5 dtbs when SOC_SAM_V4_V5 is an issue for kernelci because it will then attempt to boot ARMv4 kernels on at91sam9 which doesn't work. Use CONFIG_SOC_AT91RM9200 and CONFIG_SOC_AT91SAM9 instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- Jul 11, 2016
-
-
Marcel Ziswiler authored
This patch adds the device tree to support Toradex Apalis TK1 a computer on module which can be used on different carrier boards. The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. Furthermore, there is a Kinetis MK20DN512 companion micro controller for analogue, CAN and resistive touch functionality which is not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the module's device tree and enables the supported peripherals of the carrier board (the Evaluation Board supports almost all of them). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
- Jul 09, 2016
-
-
Chen-Yu Tsai authored
The Banana Pi series is a well known series of single board computers. The manufacturer, Sinovoip, is less well known. Moreover, the board markings do not mention Sinovoip, but only the Banana Pi logo, and the BPI-M* model name. Rename the dts file to use the more well known name. Also fix up some of the model names and labels to match other Banana Pi boards. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Jul 06, 2016
-
-
Alexander Shiyan authored
This adds the Cirrus Logic EP7209,EP7211 DT templates and support for EDB7211 Development board. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Jiancheng Xue authored
- add dts files for Hi3519 - shuffle ARCH_HIGHBANK, ARCH_HISI, ARCH_HIX5HD2 and ARCH_HIP0X around to keep the list sorted Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
-
- Jul 05, 2016
-
-
Quentin Schulz authored
The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Luo Yi authored
Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn . This board is nearly a clone of the Lemaker's Bananapro, but differ with the wlan chipset connection and i2s pinout. And I also enable the integrated audio codec on default. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The BPI-M2+ is an H3 development board. It is a smaller form factor than the original BPI-M2, with the new H3 SoC. It has 1GB DRAM, 8GB eMMC, a micro SD card slot, HDMI output, 2 USB host connector and 1 USB OTG connector, an IR receiver, WiFi+BT based on Ampak AP6212. The board also has a 3 pin header for (debug) UART, a 40 pin GPIO header based on the Raspberry Pi B+, but the peripheral signals are not the same, and an FPC connector for connecting BPI's camera. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Jul 04, 2016
-
-
Nicolas Ferre authored
Add Device Tree source file for at91sam9260ek board. This official Atmel Evaluation Kit is designed around a SoC based on a ARM 926 core the at91sam9260. The board is also added to the dts Makefile. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- Jun 29, 2016
-
-
Florian Fainelli authored
Add support for the Broadcom BCM953012 Enterprise Router reference board, enable the following peripherals: - UART0 (UART1 is not populated) - WPS and restart GPIO buttons - Ethernet switch w/ only two facing ports - NAND flash - SPI-NOR flash Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- Jun 28, 2016
-
-
Stefan Agner authored
Add support for the Computer on Module Colibri iMX7S/iMX7D along with the development/evaluation carrier board device trees. Follow the usual hierarchic include model, maintaining shared configuration in imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Linus Walleij authored
This is the first Dragonboard based on APQ8060 and PM8058. It was produced in 2011 in cooperation between Qualcomm and BSQUARE. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
Srinivas Kandagatla authored
This board has been renamed recently and announced at https://eragon.einfochips.com/products/sd-600eval.html So rename this board files so that it reflects actual product in market. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
-
Xing Zheng authored
Initial release for rk3229 evb board, and turn the GMAC on. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-
- Jun 16, 2016
-
-
Sergei Shtylyov authored
Add the initial device tree for the R8A7792 SoC based Blanche board. The board has 2 debug serial ports: SCIF0 and SCIF3; include support for them, so that the serial console can work. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
- Jun 11, 2016
-
-
Christopher Spinrath authored
The CompuLab Utilite Pro is a miniature fanless desktop pc based on the i.MX6 Quad powered cm-fx6 module. It features two serial ports, USB OTG, 4x USB, analog audio and S/PDIF, 2x Gb Ethernet, HDMI and DVI ports, an on-board 32GB SSD, a mmc slot, and on-board wifi/bt. Add initial support for it including USB, Ethernet (both ports), sata and HDMI support. Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lucas Stach authored
The Auvidea H100 is a baseboard for the SolidRun MicroSOM. Its primary feature is a Toshiba TC358743 HDMI to CSI decoder, allowing the board to work as HDMI passthrough and framegrabber. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Jon Mason authored
The BCM958525XMC board is a smaller form factor typically used as controller boards for switches. This smaller board has less devices pinned out, so only a few need be populated in the device tree. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- Jun 10, 2016
-
-
Marek Vasut authored
Add support for this small MP3 player based on STMP3780 (rev.3). Currently supported are both external microSD and internal SD-NAND bridge, PWM and USB gadget. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Marek Vasut authored
Add support for this small MP3 player based on STMP3780 (rev.4). Currently supported is both external microSD and internal SD-NAND bridge, PWM and USB gadget. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- Jun 08, 2016
-
-
Raashid Muhammed authored
sam9-l9260 is a low cost board designed by Olimex. More information is available at: https://www.olimex.com/Products/ARM/Atmel/SAM9-L9260/ Signed-off-by: Raashid Muhammed <raashidmuhammed@zilogic.com> Reviewed-by: Vijay Kumar B. <vijaykumar@bravegnu.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
- Jun 07, 2016
-
-
Chris Brand authored
Add device tree files for the Broadcom BCM23550 SoC and the Broadcom Sparrow board. Signed-off-by: Chris Brand <chris.brand@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- Jun 04, 2016
-
-
Olliver Schinagl authored
commit 27dd9af6 ("ARM: dts: sunxi: Add a olinuxino-lime2-emmc") added the new emmc equipped lime2 but forgot its Makefile. This patch adds an entry to the Makefile. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- Jun 01, 2016
-
-
Jon Mason authored
Create a new device tree file for the Broadcom Northstar Plus HR SVK. This SVK is a smaller form factor, and thus only has 2 PCI slots and 1 UART. Also, it has the ability to reboot via GPIO (instead of the processor reset). Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- May 31, 2016
-
-
Krzysztof Kozlowski authored
The Hardkernel's Odroid XU board was first design with big.LITTLE SoC from Samsung: the Exynos5410. Details: 1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is enabled), 2. 2 GB DDR3 RAM, 3. PowerVR SGX544MP3 GPU (not enabled in DTS), 4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4, 5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of revisions though), 6. eMMC 4.5 and microSD slots. Comparing this board to Odroid XU3 (more popular), the differences are: 1. Exynos5410 instead of 5422, 2. MIPI DSI LCD connector, 3. Main PMIC: Maxim 77802 instead of S2MPS11, 4. USB3503+LAN9730 instead of integrated LAN9514, 5. eMMC 4.5 instead of eMMC 5.0, This patch adds initial support for the XU board with working basic functions, eMMC/SD and USB (including attached ethernet adapter). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Link: http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137510300620
-
- May 09, 2016
-
-
Joel Stanley authored
This adds a common device tree for all fifth generation Aspeed systems, and a board specific device tree for the ast2500 evaluation board. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
A common device tree for all forth gen/ast2400 systems and a board specific dts for the Palmetto OpenPower developemnt machine which was used for testing. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
- May 03, 2016
-
-
Fabio Estevam authored
Add initial support for imx6ul pico hobbit board. For information about this board, please visit: http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdf Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- Apr 28, 2016
-
-
Vladimir Zapolskiy authored
To simplify matching of DTS files of all NXP LPC32xx powered boards by a file name add 'lpc3250' prefix to PHYTEC PHYCORE-LPC3250 board dts file. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
-
Vladimir Zapolskiy authored
To simplify matching of DTS files of all NXP LPC32xx powered boards by a file name add 'lpc3250' prefix to Embedded Artists LPC3250 board dts file. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
-
- Apr 27, 2016
-
-
Sergio Prado authored
Embest MarS Board [1] is a multi-core platform based on Freescale i.MX6 Cortex-A9 Dual Core, running up to 1GHz with 1 GB of RAM, 4GB of eMMC and with a 4MB SPI flash. [1] http://www.embest-tech.com/shop/star/marsboard.html Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Yegor Yefremov authored
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Yegor Yefremov authored
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-