- Nov 20, 2012
-
-
Marek Vasut authored
Add DTS file for this custom board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fadil Berisha authored
imx23-olinuxino board has spi pins exposed on external connector. This patch add spi support. Signed-off-by: Fadil Berisha <f.koliqi@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Nov 12, 2012
-
-
Gwenhael Goavec-Merou authored
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Nov 05, 2012
-
-
Maxime Ripard authored
Use a hog_pins pinctrl group to force the muxing of GPIOs used on the Crystalfonz CFA10036 and CFA10049 boards. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Maxime Ripard authored
The leds-gpio driver recently got pinctrl support, so setup the power led gpio muxing through pinctrl. This avoids the warning: leds-gpio leds.X: pins are not configured from the driver Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Gwenhael Goavec-Merou authored
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Gwenhael Goavec-Merou authored
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Nov 02, 2012
-
-
Gwenhael Goavec-Merou authored
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Maxime Ripard authored
There is no driver for it yet, so it will use spidev. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Nov 01, 2012
-
-
Gwenhael Goavec-Merou authored
The APF28Dev is a docking board for an APF28 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Oct 30, 2012
-
-
Julien Boibessot authored
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Oct 19, 2012
-
-
Julien Boibessot authored
The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY. Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Oct 15, 2012
-
-
Maxime Ripard authored
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver has pinctrl support, so setup the gpio led pin via pinctrl and avoid the following warning: leds-gpio leds.5: pins are not configured from the driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
The initial state of the gpio led can be set directly in "gpios" node. Hence, linux,default-trigger can be removed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver has pinctrl support, so setup the gpio led pin via pinctrl and avoid the following warning: leds-gpio leds.12: pins are not configured from the driver Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Oct 09, 2012
-
-
Peter Ujfalusi authored
u-boot stopped configuring 'non essential' pins recently. The kernel needs to configure the mux for audio needs. Since the pinmux for these IPs are static let pinctrl to handle the mux configuration for. Configuring the mux for: twl6040 (audpwron), McPDM, DMIC, McBSP1 and McBSP2. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
These all use the generic pinctrl-single driver for the padconf registers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
u-boot stopped configuring 'non essential' pins recently. The kernel needs to configure the mux for audio needs. Since the pinmux for these IPs are static let pinctrl to handle the mux configuration for. Configuring the mux for: twl6040 (audpwron, irq), McPDM and McBSP1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
u-boot stopped configuring 'non essential' pins recently. The kernel needs to configure the mux for audio needs. Since the pinmux for these IPs are static let pinctrl to handle the mux configuration for. Configuring the mux for: twl6040 (audpwron, irq), McPDM, DMIC, McBSP1 and McBSP2. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
McBSP3 is not usable on OMAP4 SDP/Blaze (the pins used for McPDM). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
McBSP3 is not usable on OMAP4 SDP/Blaze (the pins used for McPDM). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Ujfalusi authored
McBSP2, McBSP3 and DMIC is not usable on PandaBoard (not connected, no external pins provided for them). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Vaibhav Hiremath authored
This adds am335x-evm and am335x-bone dtb targets to 'make dtbs', just like other platforms. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- Oct 08, 2012
-
-
Marek Vasut authored
This patch implements DMA support into mxs-i2c. DMA transfers are now enabled via DT. The DMA operation is enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> [wsa: rebased to 3.6-rc7] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
-
Viresh Kumar authored
This adds simple DT bindings for SDHCI SPEAr controller. It uses cd-gpios from common mmc bindings. This also fixes spear300-evb.dts with correct name for card detect binding. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
- Oct 07, 2012
-
-
Shawn Guo authored
We already have CONFIG_ARCH_MXC cover imx5 and imx6 dtb targets. Remove the redundant ones with CONFIG_ARCH_IMX5 and CONFIG_SOC_IMX6Q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Tony Prisk authored
Add board files (vt8500-bv07, wm8505-ref and wm8650-mid) to allow 'make dtbs' on arch-vt8500. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Stephen Warren authored
Unit addresses, whilst written in hex, don't contain a 0x prefix. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- Oct 02, 2012
-
-
Haojian Zhuang authored
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Rob Herring authored
Some highbank DMA masters can support coherent (ACP) or non-coherent DMA. This sets up dma_map_ops for masters which are configured for coherent DMA. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
-
- Sep 26, 2012
-
-
Thomas Abraham authored
Add device nodes for the four instances of dw_mmc controllers in EXYNOS5250 and enable instance 0 and 2 for the SMDK5250 board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- Sep 25, 2012
-
-
Roland Stigge authored
This patch adjusts the PHY3250 board file to the actual LED configuration (active high, default-state and trigger configuration). Signed-off-by: Roland Stigge <stigge@antcom.de>
-
Stefano Stabellini authored
Given that the xenvm machine is based on vexpress but with an extremely limited selection of peripherals (the guest is supposed to use virtual devices instead), add "xen,xenvm" to the list of compatible machines in mach-vexpress. Changes in v3: - add comments to mark fields that are likely to be changed by the hypervisor. Changes in v2: - remove include skeleton; - use #address-cells = <2> and #size-cells = <2>; - remove the debug bootargs; - use memory@80000000 instead of memory; - remove the ranges and interrupt-map from the motherboard node; - set the machine compatible to "xen,xenvm-4.2", "xen,xenvm"; - rename the dts file to xenvm-4.2.dts; - add "xen,xenvm" to the list of compatible DT strings to mach-vexpress. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pawel Moll <pawel.moll@arm.com> (v2m changes)
-
- Sep 23, 2012
-
-
Olof Johansson authored
This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
-
- Sep 22, 2012
-
-
Thomas Petazzoni authored
The gpioX aliases are needed so that the driver can use of_alias_get_id() to get a 0-based number of the GPIO bank, which we then use to compute the base GPIO of the bank being probed. This is similar to what gpio-mxs.c is doing. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Thomas Petazzoni authored
The Armada XP evaluation board is based on the MV78460 Armava XP SoC. Now that we have separate .dtsi files for the three different SoCs of the Armada XP family, use the appropriate one as include for the Armada XP evaluation board .dts file. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Thomas Petazzoni authored
This commits adds the necessary device tree information to define the compatible property for the pinctrl driver instance of Armada 370 SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Thomas Petazzoni authored
This commits adds the necessary device tree information to define the compatible property for the pinctrl driver instance of Armada XP SoCs. Until now, the device tree representation considered the Armada XP as a single SoC. But in fact, there are three different SoCs in the Armada XP families, with different number of CPU cores, different number of Ethernet interfaces... and different number of muxable pins or functions. We therefore introduce three armada-xp-mv78xx0.dtsi for the three SoCs of the Armada XP family. The current armada-xp-db.dts evaluation board uses the MV78460 variant of the SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Jamie Lentin authored
Remove more board-specific code by using devicetree to define the fan attached to both boards. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-