Pull ARM SoC driver updates from Arnd Bergmann:
 "The main change this time was the introduction of the drivers/genpd
  subsystem that gets split out from drivers/soc to keep common
  functionality together.

  The SCMI driver subsystem gets an update to version 3.2 of the
  specification. There are also updates to memory, reset and other
  firmware drivers.

  On the soc driver side, the updates are mostly cleanups across a
  number of Arm platforms. On driver for loongarch adds power management
  for DT based systems, another driver is for HiSilicon's Arm server
  chips with their HCCS system health interface.

  The remaining updates for the most part add support for additional
  hardware in existing drivers or contain minor cleanups. Most of these
  are for the Qualcomm Snapdragon platform"

* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
  bus: fsl-mc: Use common ranges functions
  soc: kunpeng_hccs: fix some sparse warnings about incorrect type
  soc: loongson2_pm: add power management support
  soc: dt-bindings: add loongson-2 pm
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126
  bus: ti-sysc: Fix cast to enum warning
  soc: kunpeng_hccs: add MAILBOX dependency
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  soc: kunpeng_hccs: fix size_t format string
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  dt-bindings: firmware: qcom: scm: Updating VMID list
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  ...

Pull ARM SoC generic power domain driver updates from Ulf Hansson:
 "This adds a new subsystem for generic power domain providers in
  drivers/genpd and starts moving some of the corresponding code in
  there.

  We have currently ~60 users of the genpd provider interface, which are
  sprinkled across various subsystems. To release some burden from the
  soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
  better overall view of what goes on in the area, I will help out with
  maintenance"

[ I find the "genpd" name singularly uninformative, so we'll probably
  end up moving this driver subsystem somewhere else, but that's still
  being discussed  - Linus ]

* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
  genpd: ti: Use for_each_node_with_property() simplify code logic
  genpd: Explicitly include correct DT includes
  genpd: imx: scu-pd: initialize is_off according to HW state
  genpd: imx: scu-pd: Suppress bind attrs
  genpd: imx: scu-pd: do not power off console if no_console_suspend
  genpd: imx: scu-pd: add more PDs
  genpd: imx: scu-pd: enlarge PD range
  genpd: imx: relocate scu-pd under genpd
  MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
  genpd: Makefile: build imx
  genpd: move owl-sps-helper.c from drivers/soc
  soc: starfive: remove stale Makefile entry
  ARM: ux500: Move power-domain driver to the genpd dir
  ARM: ux500: Convert power-domain code into a regular platform driver
  soc: xilinx: Move power-domain driver to the genpd dir
  soc: ti: Mover power-domain drivers to the genpd dir
  soc: tegra: Move powergate-bpmp driver to the genpd dir
  soc: sunxi: Move power-domain driver to the genpd dir
  soc: starfive: Move the power-domain driver to the genpd dir
  soc: samsung: Move power-domain driver to the genpd dir
  ...

Pull sound updates from Takashi Iwai:
 "We've received a fairly wide range of changes at this time, including
  for ALSA and ASoC core, but all of them are rather small changes.

  Here are some highlights:

  ALSA / ASoC Core:
   - Fixes of inconsistent locking around control API helpers
   - A few new control API functions and cleanups
   - Workarounds for potential UAFs by delayed kobj releases
   - Unified PCM copy ops with iov_iter
   - Continued efforts for ASoC API cleanups

  ASoC:
   - An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
     some IIO changes
   - Create a library function for intlog10() and use it in the NAU8825
     driver
   - Convert drivers to use the more modern maple tree register cache
   - Lots of work on the SOF framework, AMD and Intel drivers, including
     a lot of cleanup and new device support
   - Standardization of the presentation of jacks from drivers
   - Provision of some generic sound card DT properties
   - Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
     AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
     platforms including AVS machines with ES8336 and RT5663, Mediatek
     MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110

  Others:
   - New test coverage including ASoC and topology tests in KUnit; this
     also involves enabling UML builds of ALSA since that's the default
     KUnit test environment which pulls in the addition of some stubs to
     the driver
   - More enhancement of pcmtest driver
   - A few fixes / enhancements of MIDI 2.0 UMP core
   - Using PCI definitions in allover HD-audio code
   - Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
   - CS35L41 HD-audio sub-codec improvements
   - Continued emu10k1 improvements"

* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
  ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
  ASoC: dwc: i2s: Fix unused functions
  ALSA: usb-audio: Don't try to submit URBs after disconnection
  ALSA: emu10k1: add separate documentation for E-MU cards
  ALSA: emu10k1: more documentation updates
  ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
  ALSA: ump: Fix -Wformat-truncation warnings
  ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
  ALSA: doc: Fix missing backquote in midi-2.0.rst
  ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
  ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
  ASoC: soc-core.c: Do not error if a DAI link component is not found
  ASoC: codecs: Fix error code in aw88261_i2c_probe()
  ASoC: audio-graph-card.c: move audio_graph_parse_of()
  ASoC: cs42l43: Use new-style PM runtime macros
  ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
  ALSA: ump: Don't create unused substreams for static blocks
  ALSA: ump: Fill group names for legacy rawmidi substreams
  ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
  ALSA: ac97: Fix possible error value of *rac97
  ...

Pull drm updates from Dave Airlie:
 "The drm core grew a new generic gpu virtual address manager, and new
  execution locking helpers. These are used by nouveau now to provide
  uAPI support for the userspace Vulkan driver. AMD had a bunch of new
  IP core support, loads of refactoring around fbdev, but mostly just
  the usual amount of stuff across the board.

  core:
   - fix gfp flags in drmm_kmalloc

  gpuva:
   - add new generic GPU VA manager (for nouveau initially)

  syncobj:
   - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl

  dma-buf:
   - acquire resv lock for mmap() in exporters
   - support dma-buf self import automatically
   - docs fixes

  backlight:
   - fix fbdev interactions

  atomic:
   - improve logging

  prime:
   - remove struct gem_prim_mmap plus driver updates

  gem:
   - drm_exec: add locking over multiple GEM objects
   - fix lockdep checking

  fbdev:
   - make fbdev userspace interfaces optional
   - use linux device instead of fbdev device
   - use deferred i/o helper macros in various drivers
   - Make FB core selectable without drivers
   - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
   - Add helper macros and Kconfig tokens for DMA-allocated framebuffer

  ttm:
   - support init_on_free
   - swapout fixes

  panel:
   - panel-edp: Support AUO B116XAB01.4
   - Support Visionox R66451 plus DT bindings
   - ld9040:
      - Backlight support
      - magic improved
      - Kconfig fix
   - Convert to of_device_get_match_data()
   - Fix Kconfig dependencies
   - simple:
      - Set bpc value to fix warning
      - Set connector type for AUO T215HVN01
      - Support Innolux G156HCE-L01 plus DT bindings
   - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
   - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
   - sitronix-st7789v:
      - Support Inanbo T28CP45TN89 plus DT bindings
      - Support EDT ET028013DMA plus DT bindings
      - Various cleanups
   - edp: Add timings for N140HCA-EAC
   - Allow panels and touchscreens to power sequence together
   - Fix Innolux G156HCE-L01 LVDS clock

  bridge:
   - debugfs for chains support
   - dw-hdmi:
      - Improve support for YUV420 bus format
      - CEC suspend/resume
      - update EDID on HDMI detect
   - dw-mipi-dsi: Fix enable/disable of DSI controller
   - lt9611uxc: Use MODULE_FIRMWARE()
   - ps8640: Remove broken EDID code
   - samsung-dsim: Fix command transfer
   - tc358764:
      - Handle HS/VS polarity
      - Use BIT() macro
      - Various cleanups
   - adv7511: Fix low refresh rate
   - anx7625:
      - Switch to macros instead of hardcoded values
      - locking fixes
   - tc358767: fix hardware delays
   - sitronix-st7789v:
      - Support panel orientation
      - Support rotation property
      - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings

  amdgpu:
   - SDMA 6.1.0 support
   - HDP 6.1 support
   - SMUIO 14.0 support
   - PSP 14.0 support
   - IH 6.1 support
   - Lots of checkpatch cleanups
   - GFX 9.4.3 updates
   - Add USB PD and IFWI flashing documentation
   - GPUVM updates
   - RAS fixes
   - DRR fixes
   - FAMS fixes
   - Virtual display fixes
   - Soft IH fixes
   - SMU13 fixes
   - Rework PSP firmware loading for other IPs
   - Kernel doc fixes
   - DCN 3.0.1 fixes
   - LTTPR fixes
   - DP MST fixes
   - DCN 3.1.6 fixes
   - SMU 13.x fixes
   - PSP 13.x fixes
   - SubVP fixes
   - GC 9.4.3 fixes
   - Display bandwidth calculation fixes
   - VCN4 secure submission fixes
   - Allow building DC on RISC-V
   - Add visible FB info to bo_print_info
   - HBR3 fixes
   - GFX9 MCBP fix
   - GMC10 vmhub index fix
   - GMC11 vmhub index fix
   - Create a new doorbell manager
   - SR-IOV fixes
   - initial freesync panel replay support
   - revert zpos properly until igt regression is fixeed
   - use TTM to manage doorbell BAR
   - Expose both current and average power via hwmon if supported

  amdkfd:
   - Cleanup CRIU dma-buf handling
   - Use KIQ to unmap HIQ
   - GFX 9.4.3 debugger updates
   - GFX 9.4.2 debugger fixes
   - Enable cooperative groups fof gfx11
   - SVM fixes
   - Convert older APUs to use dGPU path like newer APUs
   - Drop IOMMUv2 path as it is no longer used
   - TBA fix for aldebaran

  i915:
   - ICL+ DSI modeset sequence
   - HDCP improvements
   - MTL display fixes and cleanups
   - HSW/BDW PSR1 restored
   - Init DDI ports in VBT order
   - General display refactors
   - Start using plane scale factor for relative data rate
   - Use shmem for dpt objects
   - Expose RPS thresholds in sysfs
   - Apply GuC SLPC min frequency softlimit correctly
   - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
   - Fix a VMA UAF for multi-gt platform
   - Do not use stolen on MTL due to HW bug
   - Check HuC and GuC version compatibility on MTL
   - avoid infinite GPU waits due to premature release of request memory
   - Fixes and updates for GSC memory allocation
   - Display SDVO fixes
   - Take stolen handling out of FBC code
   - Make i915_coherent_map_type GT-centric
   - Simplify shmem_create_from_object map_type

  msm:
   - SM6125 MDSS support
   - DPU: SM6125 DPU support
   - DSI: runtime PM support, burst mode support
   - DSI PHY: SM6125 support in 14nm DSI PHY driver
   - GPU: prepare for a7xx
   - fix a690 firmware
   - disable relocs on a6xx and newer

  radeon:
   - Lots of checkpatch cleanups

  ast:
   - improve device-model detection
   - Represent BMV as virtual connector
   - Report DP connection status

  nouveau:
   - add new exec/bind interface to support Vulkan
   - document some getparam ioctls
   - improve VRAM detection
   - various fixes/cleanups
   - workraound DPCD issues

  ivpu:
   - MMU updates
   - debugfs support
   - Support vpu4

  virtio:
   - add sync object support

  atmel-hlcdc:
   - Support inverted pixclock polarity

  etnaviv:
   - runtime PM cleanups
   - hang handling fixes

  exynos:
   - use fbdev DMA helpers
   - fix possible NULL ptr dereference

  komeda:
   - always attach encoder

  omapdrm:
   - use fbdev DMA helpers
ingenic:
   - kconfig regmap fixes

  loongson:
   - support display controller

  mediatek:
   - Small mtk-dpi cleanups
   - DisplayPort: support eDP and aux-bus
   - Fix coverity issues
   - Fix potential memory leak if vmap() fail

  mgag200:
   - minor fixes

  mxsfb:
   - support disabling overlay planes

  panfrost:
   - fix sync in IRQ handling

  ssd130x:
   - Support per-controller default resolution plus DT bindings
   - Reduce memory-allocation overhead
   - Improve intermediate buffer size computation
   - Fix allocation of temporary buffers
   - Fix pitch computation
   - Fix shadow plane allocation

  tegra:
   - use fbdev DMA helpers
   - Convert to devm_platform_ioremap_resource()
   - support bridge/connector
   - enable PM

  tidss:
   - Support TI AM625 plus DT bindings
   - Implement new connector model plus driver updates

  vkms:
   - improve write back support
   - docs fixes
   - support gamma LUT

  zynqmp-dpsub:
   - misc fixes"

* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
  drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
  drm/tests/drm_kunit_helpers: Place correct function name in the comment header
  drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
  drm/nouveau: uvmm: fix unset region pointer on remap
  drm/nouveau: sched: avoid job races between entities
  drm/i915: Fix HPD polling, reenabling the output poll work as needed
  drm: Add an HPD poll helper to reschedule the poll work
  drm/i915: Fix TLB-Invalidation seqno store
  drm/ttm/tests: Fix type conversion in ttm_pool_test
  drm/msm/a6xx: Bail out early if setting GPU OOB fails
  drm/msm/a6xx: Move LLC accessors to the common header
  drm/msm/a6xx: Introduce a6xx_llc_read
  drm/ttm/tests: Require MMU when testing
  drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
  Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
  drm/amdgpu: Add memory vendor information
  drm/amd: flush any delayed gfxoff on suspend entry
  drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
  drm/amdgpu: Remove gfxoff check in GFX v9.4.3
  drm/amd/pm: Update pci link speed for smu v13.0.6
  ...

Pull xfs updates from Chandan Babu:

 - Chandan Babu will be taking over as the XFS release manager. He has
   reviewed all the patches that are in this branch, though I'm signing
   the branch one last time since I'm still technically maintainer. :P

 - Create a maintainer entry profile for XFS in which we lay out the
   various roles that I have played for many years.  Aside from release
   manager, the remaining roles are as yet unfilled.

 - Start merging online repair -- we now have in-memory pageable memory
   for staging btrees, a bunch of pending fixes, and we've started the
   process of refactoring the scrub support code to support more of
   repair.  In particular, reaping of old blocks from damaged structures.

 - Scrub the realtime summary file.

 - Fix a bug where scrub's quota iteration only ever returned the root
   dquot.  Oooops.

 - Fix some typos.

[ Pull request from Chandan Babu, but signed tag and description from
  Darrick Wong, thus the first person singular above is Darrick, not
  Chandan ]

* tag 'xfs-6.6-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (37 commits)
  fs/xfs: Fix typos in comments
  xfs: fix dqiterate thinko
  xfs: don't check reflink iflag state when checking cow fork
  xfs: simplify returns in xchk_bmap
  xfs: rewrite xchk_inode_is_allocated to work properly
  xfs: hide xfs_inode_is_allocated in scrub common code
  xfs: fix agf_fllast when repairing an empty AGFL
  xfs: allow userspace to rebuild metadata structures
  xfs: clear pagf_agflreset when repairing the AGFL
  xfs: allow the user to cancel repairs before we start writing
  xfs: don't complain about unfixed metadata when repairs were injected
  xfs: implement online scrubbing of rtsummary info
  xfs: always rescan allegedly healthy per-ag metadata after repair
  xfs: move the realtime summary file scrubber to a separate source file
  xfs: wrap ilock/iunlock operations on sc->ip
  xfs: get our own reference to inodes that we want to scrub
  xfs: track usage statistics of online fsck
  xfs: improve xfarray quicksort pivot
  xfs: create scaffolding for creating debugfs entries
  xfs: cache pages used for xfarray quicksort convergence
  ...

Pull fsnotify update from Jan Kara:
 "Just a small fsnotify cleanup this time"

* tag 'fsnotify_for_v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: Remove unused extern declaration fsnotify_get_conn_fsid()

Pull ext2, quota, and udf updates from Jan Kara:

 - fixes for possible use-after-free issues with quota when racing with
   chown

 - fixes for ext2 crashing when xattr allocation races with another
   block allocation to the same file from page writeback code

 - fix for block number overflow in ext2

 - marking of reiserfs as obsolete in MAINTAINERS

 - assorted minor cleanups

* tag 'for_v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Fix kernel-doc warnings
  ext2: improve consistency of ext2_fsblk_t datatype usage
  ext2: dump current reservation window info
  ext2: fix race between setxattr and write back
  ext2: introduce new flags argument for ext2_new_blocks()
  ext2: remove ext2_new_block()
  ext2: fix datatype of block number in ext2_xattr_set2()
  udf: Drop pointless aops assignment
  quota: use lockdep_assert_held_write in dquot_load_quota_sb
  MAINTAINERS: change reiserfs status to obsolete
  udf: Fix -Wstringop-overflow warnings
  quota: simplify drop_dquot_ref()
  quota: fix dqput() to follow the guarantees dquot_srcu should provide
  quota: add new helper dquot_active()
  quota: rename dquot_active() to inode_quota_active()
  quota: factor out dquot_write_dquot()
  ext2: remove redundant assignment to variable desc and variable best_desc

Pull overlayfs updates from Amir Goldstein:

 - add verification feature needed by composefs (Alexander Larsson)

 - improve integration of overlayfs and fanotify (Amir Goldstein)

 - fortify some overlayfs code (Andrea Righi)

* tag 'ovl-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: validate superblock in OVL_FS()
  ovl: make consistent use of OVL_FS()
  ovl: Kconfig: introduce CONFIG_OVERLAY_FS_DEBUG
  ovl: auto generate uuid for new overlay filesystems
  ovl: store persistent uuid/fsid with uuid=on
  ovl: add support for unique fsid per instance
  ovl: support encoding non-decodable file handles
  ovl: Handle verity during copy-up
  ovl: Validate verity xattr when resolving lowerdata
  ovl: Add versioned header for overlay.metacopy xattr
  ovl: Add framework for verity support

Pull x86 apic updates from Dave Hansen:
 "This includes a very thorough rework of the 'struct apic' handlers.
  Quite a variety of them popped up over the years, especially in the
  32-bit days when odd apics were much more in vogue.

  The end result speaks for itself, which is a removal of a ton of code
  and static calls to replace indirect calls.

  If there's any breakage here, it's likely to be around the 32-bit
  museum pieces that get light to no testing these days.

  Summary:

   - Rework apic callbacks, getting rid of unnecessary ones and
     coalescing lots of silly duplicates.

   - Use static_calls() instead of indirect calls for apic->foo()

   - Tons of cleanups an crap removal along the way"

* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  x86/apic: Turn on static calls
  x86/apic: Provide static call infrastructure for APIC callbacks
  x86/apic: Wrap IPI calls into helper functions
  x86/apic: Mark all hotpath APIC callback wrappers __always_inline
  x86/xen/apic: Mark apic __ro_after_init
  x86/apic: Convert other overrides to apic_update_callback()
  x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
  x86/apic: Provide apic_update_callback()
  x86/xen/apic: Use standard apic driver mechanism for Xen PV
  x86/apic: Provide common init infrastructure
  x86/apic: Wrap apic->native_eoi() into a helper
  x86/apic: Nuke ack_APIC_irq()
  x86/apic: Remove pointless arguments from [native_]eoi_write()
  x86/apic/noop: Tidy up the code
  x86/apic: Remove pointless NULL initializations
  x86/apic: Sanitize APIC ID range validation
  x86/apic: Prepare x2APIC for using apic::max_apic_id
  x86/apic: Simplify X2APIC ID validation
  x86/apic: Add max_apic_id member
  x86/apic: Wrap APIC ID validation into an inline
  ...

Pull x86 core updates from Thomas Gleixner:

 - Prevent kprobes on compiler generated CFI checking code.

   The compiler generates an instruction sequence for indirect call
   checks. If this sequence is modified with a kprobe, then the check
   fails. So the instructions must be protected against probing.

 - A few minor cleanups for the SMP code

* tag 'x86-core-2023-08-30-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Prohibit probing on compiler generated CFI checking code
  x86/smpboot: Change smp_store_boot_cpu_info() to static
  x86/smp: Remove a non-existent function declaration
  x86/smpboot: Remove a stray comment about CPU hotplug

Pull x86 mm updates from Dave Hansen:
 "A pair of small x86/mm updates. The INVPCID one is purely a cleanup.
  The PAT one fixes a real issue, albeit a relatively obscure one
  (graphics device passthrough under Xen). The fix also makes the code
  much more readable.

  Summary:

   - Remove unnecessary "INVPCID single" feature tracking

   - Include PAT in page protection modify mask"

* tag 'x86_mm_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Remove "INVPCID single" feature tracking
  x86/mm: Fix PAT bit missing from page protection modify mask

Intel CPUs ship with ERMS for over a decade, but this is not true for
AMD.  In particular one reasonably recent uarch (EPYC 7R13) does not
have it (or at least the bit is inactive when running on the Amazon EC2
cloud -- I found rather conflicting information about AMD CPUs vs the
extension).

Hand-rolled mov loops executing in this case are quite pessimal compared
to rep movsq for bigger sizes.  While the upper limit depends on uarch,
everyone is well south of 1KB AFAICS and sizes bigger than that are
common.

While technically ancient CPUs may be suffering from rep usage, gcc has
been emitting it for years all over kernel code, so I don't think this
is a legitimate concern.

Sample result from read1_processes from will-it-scale (4KB reads/s):

  before:   1507021
  after:    1721828 (+14%)

Note that the cutoff point for rep usage is set to 64 bytes, which is
way too conservative but I'm sticking to what was done in 47ee3f1d


("x86: re-introduce support for ERMS copies for user space accesses").
That is to say *some* copies will now go slower, which is fixable but
beyond the scope of this patch.

Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull smack updates from Casey Schaufler:
 "Two minor fixes: is a simple spelling fix. The other is a bounds check
  for a very likely underflow"

* tag 'Smack-for-6.6' of https://github.com/cschaufler/smack-next:
  smackfs: Prevent underflow in smk_set_cipso()
  security: smack: smackfs: fix typo (lables->labels)

Pull integrity subsystem updates from Mimi Zohar:

 - With commit 099f26f2 ("integrity: machine keyring CA
   configuration") certificates may be loaded onto the IMA keyring,
   directly or indirectly signed by keys on either the "builtin" or the
   "machine" keyrings.

   With the ability for the system/machine owner to sign the IMA policy
   itself without needing to recompile the kernel, update the IMA
   architecture specific policy rules to require the IMA policy itself
   be signed.

   [ As commit 099f26f2 was upstreamed in linux-6.4, updating the
     IMA architecture specific policy now to require signed IMA policies
     may break userspace expectations. ]

 - IMA only checked the file data hash was not on the system blacklist
   keyring for files with an appended signature (e.g. kernel modules,
   Power kernel image).

   Check all file data hashes regardless of how it was signed

 - Code cleanup, and a kernel-doc update

* tag 'integrity-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  kexec_lock: Replace kexec_mutex() by kexec_lock() in two comments
  ima: require signed IMA policy when UEFI secure boot is enabled
  integrity: Always reference the blacklist keyring with appraisal
  ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig

Pull LSM updates from Paul Moore:

 - Add proper multi-LSM support for xattrs in the
   security_inode_init_security() hook

   Historically the LSM layer has only allowed a single LSM to add an
   xattr to an inode, with IMA/EVM measuring that and adding its own as
   well. As we work towards promoting IMA/EVM to a "proper LSM" instead
   of the special case that it is now, we need to better support the
   case of multiple LSMs each adding xattrs to an inode and after
   several attempts we now appear to have something that is working
   well. It is worth noting that in the process of making this change we
   uncovered a problem with Smack's SMACK64TRANSMUTE xattr which is also
   fixed in this pull request.

 - Additional LSM hook constification

   Two patches to constify parameters to security_capget() and
   security_binder_transfer_file(). While I generally don't make a
   special note of who submitted these patches, these were the work of
   an Outreachy intern, Khadija Kamran, and that makes me happy;
   hopefully it does the same for all of you reading this.

 - LSM hook comment header fixes

   One patch to add a missing hook comment header, one to fix a minor
   typo.

 - Remove an old, unused credential function declaration

   It wasn't clear to me who should pick this up, but it was trivial,
   obviously correct, and arguably the LSM layer has a vested interest
   in credentials so I merged it. Sadly I'm now noticing that despite my
   subject line cleanup I didn't cleanup the "unsued" misspelling, sigh

* tag 'lsm-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: constify the 'file' parameter in security_binder_transfer_file()
  lsm: constify the 'target' parameter in security_capget()
  lsm: add comment block for security_sk_classify_flow LSM hook
  security: Fix ret values doc for security_inode_init_security()
  cred: remove unsued extern declaration change_create_files_as()
  evm: Support multiple LSMs providing an xattr
  evm: Align evm_inode_init_security() definition with LSM infrastructure
  smack: Set the SMACK64TRANSMUTE xattr in smack_inode_init_security()
  security: Allow all LSMs to provide xattrs for inode_init_security hook
  lsm: fix typo in security_file_lock() comment header

Pull selinux updates from Paul Moore:
 "Thirty three SELinux patches, which is a pretty big number for us, but
  there isn't really anything scary in here; in fact we actually manage
  to remove 10 lines of code with this :)

   - Promote the SELinux DEBUG_HASHES macro to CONFIG_SECURITY_SELINUX_DEBUG

     The DEBUG_HASHES macro was a buried SELinux specific preprocessor
     debug macro that was a problem waiting to happen. Promoting the
     debug macro to a proper Kconfig setting should help both improve
     the visibility of the feature as well enable improved test
     coverage. We've moved some additional debug functions under the
     CONFIG_SECURITY_SELINUX_DEBUG flag and we may see more work in the
     future.

   - Emit a pr_notice() message if virtual memory is executable by default

     As this impacts the SELinux access control policy enforcement, if
     the system's configuration is such that virtual memory is
     executable by default we print a single line notice to the console.

   - Drop avtab_search() in favor of avtab_search_node()

     Both functions are nearly identical so we removed avtab_search()
     and converted the callers to avtab_search_node().

   - Add some SELinux network auditing helpers

     The helpers not only reduce a small amount of code duplication, but
     they provide an opportunity to improve UDP flood performance
     slightly by delaying initialization of the audit data in some
     cases.

   - Convert GFP_ATOMIC allocators to GFP_KERNEL when reading SELinux policy

     There were two SELinux policy load helper functions that were
     allocating memory using GFP_ATOMIC, they have been converted to
     GFP_KERNEL.

   - Quiet a KMSAN warning in selinux_inet_conn_request()

     A one-line error path (re)set patch that resolves a KMSAN warning.
     It is important to note that this doesn't represent a real bug in
     the current code, but it quiets KMSAN and arguably hardens the code
     against future changes.

   - Cleanup the policy capability accessor functions

     This is a follow-up to the patch which reverted SELinux to using a
     global selinux_state pointer. This patch cleans up some artifacts
     of that change and turns each accessor into a one-line READ_ONCE()
     call into the policy capabilities array.

   - A number of patches from Christian Göttsche

     Christian submitted almost two-thirds of the patches in this pull
     request as he worked to harden the SELinux code against type
     differences, variable overflows, etc.

   - Support for separating early userspace from the kernel in policy,
     with a later revert

     We did have a patch that added a new userspace initial SID which
     would allow SELinux to distinguish between early user processes
     created before the initial policy load and the kernel itself.

     Unfortunately additional post-merge testing revealed a problematic
     interaction with an old SELinux userspace on an old version of
     Ubuntu so we've reverted the patch until we can resolve the
     compatibility issue.

   - Remove some outdated comments dealing with LSM hook registration

     When we removed the runtime disable functionality we forgot to
     remove some old comments discussing the importance of LSM hook
     registration ordering.

   - Minor administrative changes

     Stephen Smalley updated his email address and "debranded" SELinux
     from "NSA SELinux" to simply "SELinux". We've come a long way from
     the original NSA submission and I would consider SELinux a true
     community project at this point so removing the NSA branding just
     makes sense"

* tag 'selinux-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (33 commits)
  selinux: prevent KMSAN warning in selinux_inet_conn_request()
  selinux: use unsigned iterator in nlmsgtab code
  selinux: avoid implicit conversions in policydb code
  selinux: avoid implicit conversions in selinuxfs code
  selinux: make left shifts well defined
  selinux: update type for number of class permissions in services code
  selinux: avoid implicit conversions in avtab code
  selinux: revert SECINITSID_INIT support
  selinux: use GFP_KERNEL while reading binary policy
  selinux: update comment on selinux_hooks[]
  selinux: avoid implicit conversions in services code
  selinux: avoid implicit conversions in mls code
  selinux: use identical iterator type in hashtab_duplicate()
  selinux: move debug functions into debug configuration
  selinux: log about VM being executable by default
  selinux: fix a 0/NULL mistmatch in ad_net_init_from_iif()
  selinux: introduce SECURITY_SELINUX_DEBUG configuration
  selinux: introduce and use lsm_ad_net_init*() helpers
  selinux: update my email address
  selinux: add missing newlines in pr_err() statements
  ...

Pull audit updates from Paul Moore:
 "Six audit patches, the highlights are:

   - Add an explicit cond_resched() call when generating PATH records

     Certain tracefs/debugfs operations can generate a *lot* of audit
     PATH entries and if one has an aggressive system configuration (not
     the default) this can cause a soft lockup in the audit code as it
     works to process all of these new entries.

     This is in sharp contrast to the common case where only one or two
     PATH entries are logged. In order to fix this corner case without
     excessively impacting the common case we're adding a single
     cond_rescued() call between two of the most intensive loops in the
     __audit_inode_child() function.

   - Various minor cleanups

     We removed a conditional header file as the included header already
     had the necessary logic in place, fixed a dummy function's return
     value, and the usual collection of checkpatch.pl noise (whitespace,
     brace, and trailing statement tweaks)"

* tag 'audit-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: move trailing statements to next line
  audit: cleanup function braces and assignment-in-if-condition
  audit: add space before parenthesis and around '=', "==", and '<'
  audit: fix possible soft lockup in __audit_inode_child()
  audit: correct audit_filter_inodes() definition
  audit: include security.h unconditionally

Pull dma-maping updates from Christoph Hellwig:

 - allow dynamic sizing of the swiotlb buffer, to cater for secure
   virtualization workloads that require all I/O to be bounce buffered
   (Petr Tesarik)

 - move a declaration to a header (Arnd Bergmann)

 - check for memory region overlap in dma-contiguous (Binglei Wang)

 - remove the somewhat dangerous runtime swiotlb-xen enablement and
   unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)

 - per-node CMA improvements (Yajun Deng)

* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: optimize get_max_slots()
  swiotlb: move slot allocation explanation comment where it belongs
  swiotlb: search the software IO TLB only if the device makes use of it
  swiotlb: allocate a new memory pool when existing pools are full
  swiotlb: determine potential physical address limit
  swiotlb: if swiotlb is full, fall back to a transient memory pool
  swiotlb: add a flag whether SWIOTLB is allowed to grow
  swiotlb: separate memory pool data from other allocator data
  swiotlb: add documentation and rename swiotlb_do_find_slots()
  swiotlb: make io_tlb_default_mem local to swiotlb.c
  swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
  dma-contiguous: check for memory region overlap
  dma-contiguous: support numa CMA for specified node
  dma-contiguous: support per-numa CMA for all architectures
  dma-mapping: move arch_dma_set_mask() declaration to header
  swiotlb: unexport is_swiotlb_active
  x86: always initialize xen-swiotlb when xen-pcifront is enabling
  xen/pci: add flag for PCI passthrough being possible

Pull block updates from Jens Axboe:
 "Pretty quiet round for this release. This contains:

   - Add support for zoned storage to ublk (Andreas, Ming)

   - Series improving performance for drivers that mark themselves as
     needing a blocking context for issue (Bart)

   - Cleanup the flush logic (Chengming)

   - sed opal keyring support (Greg)

   - Fixes and improvements to the integrity support (Jinyoung)

   - Add some exports for bcachefs that we can hopefully delete again in
     the future (Kent)

   - deadline throttling fix (Zhiguo)

   - Series allowing building the kernel without buffer_head support
     (Christoph)

   - Sanitize the bio page adding flow (Christoph)

   - Write back cache fixes (Christoph)

   - MD updates via Song:
      - Fix perf regression for raid0 large sequential writes (Jan)
      - Fix split bio iostat for raid0 (David)
      - Various raid1 fixes (Heinz, Xueshi)
      - raid6test build fixes (WANG)
      - Deprecate bitmap file support (Christoph)
      - Fix deadlock with md sync thread (Yu)
      - Refactor md io accounting (Yu)
      - Various non-urgent fixes (Li, Yu, Jack)

   - Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
     Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"

* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
  block: use strscpy() to instead of strncpy()
  block: sed-opal: keyring support for SED keys
  block: sed-opal: Implement IOC_OPAL_REVERT_LSP
  block: sed-opal: Implement IOC_OPAL_DISCOVERY
  blk-mq: prealloc tags when increase tagset nr_hw_queues
  blk-mq: delete redundant tagset map update when fallback
  blk-mq: fix tags leak when shrink nr_hw_queues
  ublk: zoned: support REQ_OP_ZONE_RESET_ALL
  md: raid0: account for split bio in iostat accounting
  md/raid0: Fix performance regression for large sequential writes
  md/raid0: Factor out helper for mapping and submitting a bio
  md raid1: allow writebehind to work on any leg device set WriteMostly
  md/raid1: hold the barrier until handle_read_error() finishes
  md/raid1: free the r1bio before waiting for blocked rdev
  md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
  blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
  drivers/rnbd: restore sysfs interface to rnbd-client
  md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
  raid6: test: only check for Altivec if building on powerpc hosts
  raid6: test: make sure all intermediate and artifact files are .gitignored
  ...

Pull io_uring updates from Jens Axboe:
 "Fairly quiet round in terms of features, mostly just improvements all
  over the map for existing code. In detail:

   - Initial support for socket operations through io_uring. Latter half
     of this will likely land with the 6.7 kernel, then allowing things
     like get/setsockopt (Breno)

   - Cleanup of the cancel code, and then adding support for canceling
     requests with the opcode as the key (me)

   - Improvements for the io-wq locking (me)

   - Fix affinity setting for SQPOLL based io-wq (me)

   - Remove the io_uring userspace code. These were added initially as
     copies from liburing, but all of them have since bitrotted and are
     way out of date at this point. Rather than attempt to keep them in
     sync, just get rid of them. People will have liburing available
     anyway for these examples. (Pavel)

   - Series improving the CQ/SQ ring caching (Pavel)

   - Misc fixes and cleanups (Pavel, Yue, me)"

* tag 'for-6.6/io_uring-2023-08-28' of git://git.kernel.dk/linux: (47 commits)
  io_uring: move iopoll ctx fields around
  io_uring: move multishot cqe cache in ctx
  io_uring: separate task_work/waiting cache line
  io_uring: banish non-hot data to end of io_ring_ctx
  io_uring: move non aligned field to the end
  io_uring: add option to remove SQ indirection
  io_uring: compact SQ/CQ heads/tails
  io_uring: force inline io_fill_cqe_req
  io_uring: merge iopoll and normal completion paths
  io_uring: reorder cqring_flush and wakeups
  io_uring: optimise extra io_get_cqe null check
  io_uring: refactor __io_get_cqe()
  io_uring: simplify big_cqe handling
  io_uring: cqe init hardening
  io_uring: improve cqe !tracing hot path
  io_uring/rsrc: Annotate struct io_mapped_ubuf with __counted_by
  io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used
  io_uring: simplify io_run_task_work_sig return
  io_uring/rsrc: keep one global dummy_ubuf
  io_uring: never overflow io_aux_cqe
  ...

Pull sysctl updates from Luis Chamberlain:
 "Long ago we set out to remove the kitchen sink on kernel/sysctl.c
  arrays and placings sysctls to their own sybsystem or file to help
  avoid merge conflicts. Matthew Wilcox pointed out though that if we're
  going to do that we might as well also *save* space while at it and
  try to remove the extra last sysctl entry added at the end of each
  array, a sentintel, instead of bloating the kernel by adding a new
  sentinel with each array moved.

  Doing that was not so trivial, and has required slowing down the moves
  of kernel/sysctl.c arrays and measuring the impact on size by each new
  move.

  The complex part of the effort to help reduce the size of each sysctl
  is being done by the patient work of el señor Don Joel Granados. A lot
  of this is truly painful code refactoring and testing and then trying
  to measure the savings of each move and removing the sentinels.
  Although Joel already has code which does most of this work,
  experience with sysctl moves in the past shows is we need to be
  careful due to the slew of odd build failures that are possible due to
  the amount of random Kconfig options sysctls use.

  To that end Joel's work is split by first addressing the major
  housekeeping needed to remove the sentinels, which is part of this
  merge request. The rest of the work to actually remove the sentinels
  will be done later in future kernel releases.

  The preliminary math is showing this will all help reduce the overall
  build time size of the kernel and run time memory consumed by the
  kernel by about ~64 bytes per array where we are able to remove each
  sentinel in the future. That also means there is no more bloating the
  kernel with the extra ~64 bytes per array moved as no new sentinels
  are created"

* tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: Use ctl_table_size as stopping criteria for list macro
  sysctl: SIZE_MAX->ARRAY_SIZE in register_net_sysctl
  vrf: Update to register_net_sysctl_sz
  networking: Update to register_net_sysctl_sz
  netfilter: Update to register_net_sysctl_sz
  ax.25: Update to register_net_sysctl_sz
  sysctl: Add size to register_net_sysctl function
  sysctl: Add size arg to __register_sysctl_init
  sysctl: Add size to register_sysctl
  sysctl: Add a size arg to __register_sysctl_table
  sysctl: Add size argument to init_header
  sysctl: Add ctl_table_size to ctl_table_header
  sysctl: Use ctl_table_header in list_for_each_table_entry
  sysctl: Prefer ctl_table_header in proc_sysctl

Pull modules updates from Luis Chamberlain:
 "Summary of the changes worth highlighting from most interesting to
  boring below:

   - Christoph Hellwig's symbol_get() fix to Nvidia's efforts to
     circumvent the protection he put in place in year 2020 to prevent
     proprietary modules from using GPL only symbols, and also ensuring
     proprietary modules which export symbols grandfather their taint.

     That was done through year 2020 commit 262e6ae7 ("modules:
     inherit TAINT_PROPRIETARY_MODULE"). Christoph's new fix is done by
     clarifing __symbol_get() was only ever intended to prevent module
     reference loops by Linux kernel modules and so making it only find
     symbols exported via EXPORT_SYMBOL_GPL(). The circumvention tactic
     used by Nvidia was to use symbol_get() to purposely swift through
     proprietary module symbols and completely bypass our traditional
     EXPORT_SYMBOL*() annotations and community agreed upon
     restrictions.

     A small set of preamble patches fix up a few symbols which just
     needed adjusting for this on two modules, the rtc ds1685 and the
     networking enetc module. Two other modules just needed some build
     fixing and removal of use of __symbol_get() as they can't ever be
     modular, as was done by Arnd on the ARM pxa module and Christoph
     did on the mmc au1xmmc driver.

     This is a good reminder to us that symbol_get() is just a hack to
     address things which should be fixed through Kconfig at build time
     as was done in the later patches, and so ultimately it should just
     go.

   - Extremely late minor fix for old module layout 055f23b7
     ("module: check for exit sections in layout_sections() instead of
     module_init_section()") by James Morse for arm64. Note that this
     layout thing is old, it is *not* Song Liu's commit ac3b4328
     ("module: replace module_layout with module_memory"). The issue
     however is very odd to run into and so there was no hurry to get
     this in fast.

   - Although the fix did not go through the modules tree I'd like to
     highlight the fix by Peter Zijlstra in commit 54097309
     ("x86/static_call: Fix __static_call_fixup()") now merged in your
     tree which came out of what was originally suspected to be a
     fallout of the the newer module layout changes by Song Liu commit
     ac3b4328 ("module: replace module_layout with module_memory")
     instead of module_init_section()"). Thanks to the report by
     Christian Bricart and the debugging by Song Liu & Peter that turned
     to be noted as a kernel regression in place since v5.19 through
     commit ee88d363 ("x86,static_call: Use alternative RET
     encoding").

     I highlight this to reflect and clarify that we haven't seen more
     fallout from ac3b4328 ("module: replace module_layout with
     module_memory").

   - RISC-V toolchain got mapping symbol support which prefix symbols
     with "$" to help with alignment considerations for disassembly.

     This is used to differentiate between incompatible instruction
     encodings when disassembling. RISC-V just matches what ARM/AARCH64
     did for alignment considerations and Palmer Dabbelt extended
     is_mapping_symbol() to accept these symbols for RISC-V. We already
     had support for this for all architectures but it also checked for
     the second character, the RISC-V check Dabbelt added was just for
     the "$". After a bit of testing and fallout on linux-next and based
     on feedback from Masahiro Yamada it was decided to simplify the
     check and treat the first char "$" as unique for all architectures,
     and so we no make is_mapping_symbol() for all archs if the symbol
     starts with "$".

     The most relevant commit for this for RISC-V on binutils was:

       https://sourceware.org/pipermail/binutils/2021-July/117350.html

   - A late fix by Andrea Righi (today) to make module zstd
     decompression use vmalloc() instead of kmalloc() to account for
     large compressed modules. I suspect we'll see similar things for
     other decompression algorithms soon.

   - samples/hw_breakpoint minor fixes by Rong Tao, Arnd Bergmann and
     Chen Jiahao"

* tag 'modules-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module/decompress: use vmalloc() for zstd decompression workspace
  kallsyms: Add more debug output for selftest
  ARM: module: Use module_init_layout_section() to spot init sections
  arm64: module: Use module_init_layout_section() to spot init sections
  module: Expose module_init_layout_section()
  modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
  rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
  net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
  mmc: au1xmmc: force non-modular build and remove symbol_get usage
  ARM: pxa: remove use of symbol_get()
  samples/hw_breakpoint: mark sample_hbp as static
  samples/hw_breakpoint: fix building without module unloading
  samples/hw_breakpoint: Fix kernel BUG 'invalid opcode: 0000'
  modpost, kallsyms: Treat add '$'-prefixed symbols as mapping symbols
  kernel: params: Remove unnecessary ‘0’ values from err
  module: Ignore RISC-V mapping symbols too

Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - An extensive rework of kexec and crash Kconfig from Eric DeVolder
   ("refactor Kconfig to consolidate KEXEC and CRASH options")

 - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
   couple of macros to args.h")

 - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
   commands")

 - vsprintf inclusion rationalization from Andy Shevchenko
   ("lib/vsprintf: Rework header inclusions")

 - Switch the handling of kdump from a udev scheme to in-kernel
   handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
   hot un/plug")

 - Many singleton patches to various parts of the tree

* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
  document while_each_thread(), change first_tid() to use for_each_thread()
  drivers/char/mem.c: shrink character device's devlist[] array
  x86/crash: optimize CPU changes
  crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
  crash: hotplug support for kexec_load()
  x86/crash: add x86 crash hotplug support
  crash: memory and CPU hotplug sysfs attributes
  kexec: exclude elfcorehdr from the segment digest
  crash: add generic infrastructure for crash hotplug support
  crash: move a few code bits to setup support of crash hotplug
  kstrtox: consistently use _tolower()
  kill do_each_thread()
  nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
  scripts/bloat-o-meter: count weak symbol sizes
  treewide: drop CONFIG_EMBEDDED
  lockdep: fix static memory detection even more
  lib/vsprintf: declare no_hash_pointers in sprintf.h
  lib/vsprintf: split out sprintf() and friends
  kernel/fork: stop playing lockless games for exe_file replacement
  adfs: delete unused "union adfs_dirtail" definition
  ...

Pull MM updates from Andrew Morton:

 - Some swap cleanups from Ma Wupeng ("fix WARN_ON in
   add_to_avail_list")

 - Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
   reduces the special-case code for handling hugetlb pages in GUP. It
   also speeds up GUP handling of transparent hugepages.

 - Peng Zhang provides some maple tree speedups ("Optimize the fast path
   of mas_store()").

 - Sergey Senozhatsky has improved te performance of zsmalloc during
   compaction (zsmalloc: small compaction improvements").

 - Domenico Cerasuolo has developed additional selftest code for zswap
   ("selftests: cgroup: add zswap test program").

 - xu xin has doe some work on KSM's handling of zero pages. These
   changes are mainly to enable the user to better understand the
   effectiveness of KSM's treatment of zero pages ("ksm: support
   tracking KSM-placed zero-pages").

 - Jeff Xu has fixes the behaviour of memfd's
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").

 - David Howells has fixed an fscache optimization ("mm, netfs, fscache:
   Stop read optimisation when folio removed from pagecache").

 - Axel Rasmussen has given userfaultfd the ability to simulate memory
   poisoning ("add UFFDIO_POISON to simulate memory poisoning with
   UFFD").

 - Miaohe Lin has contributed some routine maintenance work on the
   memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
   check").

 - Peng Zhang has contributed some maintenance work on the maple tree
   code ("Improve the validation for maple tree and some cleanup").

 - Hugh Dickins has optimized the collapsing of shmem or file pages into
   THPs ("mm: free retracted page table by RCU").

 - Jiaqi Yan has a patch series which permits us to use the healthy
   subpages within a hardware poisoned huge page for general purposes
   ("Improve hugetlbfs read on HWPOISON hugepages").

 - Kemeng Shi has done some maintenance work on the pagetable-check code
   ("Remove unused parameters in page_table_check").

 - More folioification work from Matthew Wilcox ("More filesystem folio
   conversions for 6.6"), ("Followup folio conversions for zswap"). And
   from ZhangPeng ("Convert several functions in page_io.c to use a
   folio").

 - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").

 - Baoquan He has converted some architectures to use the
   GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
   architectures to take GENERIC_IOREMAP way").

 - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
   batched/deferred tlb shootdown during page reclamation/migration").

 - Better maple tree lockdep checking from Liam Howlett ("More strict
   maple tree lockdep"). Liam also developed some efficiency
   improvements ("Reduce preallocations for maple tree").

 - Cleanup and optimization to the secondary IOMMU TLB invalidation,
   from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
   upgrade").

 - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
   for arm64").

 - Kemeng Shi provides some maintenance work on the compaction code
   ("Two minor cleanups for compaction").

 - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
   most file-backed faults under the VMA lock").

 - Aneesh Kumar contributes code to use the vmemmap optimization for DAX
   on ppc64, under some circumstances ("Add support for DAX vmemmap
   optimization for ppc64").

 - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
   data in page_ext"), ("minor cleanups to page_ext header").

 - Some zswap cleanups from Johannes Weiner ("mm: zswap: three
   cleanups").

 - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").

 - VMA handling cleanups from Kefeng Wang ("mm: convert to
   vma_is_initial_heap/stack()").

 - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
   implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
   address ranges and DAMON monitoring targets").

 - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").

 - Liam Howlett has improved the maple tree node replacement code
   ("maple_tree: Change replacement strategy").

 - ZhangPeng has a general code cleanup - use the K() macro more widely
   ("cleanup with helper macro K()").

 - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
   memmap on memory feature on ppc64").

 - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
   in page_alloc"), ("Two minor cleanups for get pageblock
   migratetype").

 - Vishal Moola introduces a memory descriptor for page table tracking,
   "struct ptdesc" ("Split ptdesc from struct page").

 - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
   for vm.memfd_noexec").

 - MM include file rationalization from Hugh Dickins ("arch: include
   asm/cacheflush.h in asm/hugetlb.h").

 - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
   output").

 - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
   object_cache instead of kmemleak_initialized").

 - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
   and _folio_order").

 - A VMA locking scalability improvement from Suren Baghdasaryan
   ("Per-VMA lock support for swap and userfaults").

 - pagetable handling cleanups from Matthew Wilcox ("New page table
   range API").

 - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
   using page->private on tail pages for THP_SWAP + cleanups").

 - Cleanups and speedups to the hugetlb fault handling from Matthew
   Wilcox ("Change calling convention for ->huge_fault").

 - Matthew Wilcox has also done some maintenance work on the MM
   subsystem documentation ("Improve mm documentation").

* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
  maple_tree: shrink struct maple_tree
  maple_tree: clean up mas_wr_append()
  secretmem: convert page_is_secretmem() to folio_is_secretmem()
  nios2: fix flush_dcache_page() for usage from irq context
  hugetlb: add documentation for vma_kernel_pagesize()
  mm: add orphaned kernel-doc to the rst files.
  mm: fix clean_record_shared_mapping_range kernel-doc
  mm: fix get_mctgt_type() kernel-doc
  mm: fix kernel-doc warning from tlb_flush_rmaps()
  mm: remove enum page_entry_size
  mm: allow ->huge_fault() to be called without the mmap_lock held
  mm: move PMD_ORDER to pgtable.h
  mm: remove checks for pte_index
  memcg: remove duplication detection for mem_cgroup_uncharge_swap
  mm/huge_memory: work on folio->swap instead of page->private when splitting folio
  mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
  mm/swap: use dedicated entry for swap in folio
  mm/swap: stop using page->private on tail pages for THP_SWAP
  selftests/mm: fix WARNING comparing pointer to 0
  selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
  ...

Pull slab updates from Vlastimil Babka:
 "This happens to be a small one (due to summer I guess), and all
  hardening related:

   - Randomized kmalloc caches, by GONG, Ruiqi.

     A new opt-in hardening feature to make heap spraying harder. It
     creates multiple (16) copies of kmalloc caches, reducing the chance
     of an attacker-controllable allocation site to land in the same
     slab as e.g. an allocation site with use-after-free vulnerability.

     The selection of the copy is derived from the allocation site
     address, including a per-boot random seed.

   - Stronger typing for hardened freelists in SLUB, by Jann Horn

     Introduces a custom type for hardened freelist entries instead of
     "void *" as those are not directly dereferencable. While reviewing
     this, I've noticed opportunities for further cleanups in that code
     and added those on top"

* tag 'slab-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  Randomized slab caches for kmalloc()
  mm/slub: remove freelist_dereference()
  mm/slub: remove redundant kasan_reset_tag() from freelist_ptr calculations
  mm/slub: refactor freelist to use custom type

Since commit 3d5089c4

 ("of/address: Add support for 3 address cell
bus"), the DT address functions can handle translating buses with 3
address cells. Replace the custom code with the for_each_of_range()
iterator.

The original code had fallbacks to get "#address-cells"/"#size-cells"
from the bus parent node if they are missing. This is non-standard
behavior, and AFAICT the upstream .dts files never relied on that.

Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823190958.2717267-1-robh@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'flex-array-transformations-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array updates from Gustavo A. R. Silva.

* tag 'flex-array-transformations-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  fs: omfs: Use flexible-array member in struct omfs_extent
  sparc: openpromio: Address -Warray-bounds warning
  reiserfs: Replace one-element array with flexible-array member

Pull arch/csky updates from Guo Ren:

 - Fixup compile warnings

 - Fixup update_mmu_cache

* tag 'csky-for-linus-6.6' of https://github.com/c-sky/csky-linux:
  csky: Fixup -Wmissing-prototypes warning
  csky: Make pfn accessors static inlines
  csky: Cast argument to virt_to_pfn() to (void *)
  csky: pgtable: Invalidate stale I-cache lines in update_mmu_cache
  csky: fix old style declaration in module.c

Pull parisc architecture updates from Helge Deller:
 "PA-RISC now has a native eBPF JIT compiler for 32- and 64-bit kernels,
  the LED driver was rewritten to use the Linux LED framework and most
  of the parisc bootup code was switched to use *_initcall() functions.

  Summary:

   - add eBPF JIT compiler for 32- and 64-bit kernel

   - LCD/LED driver rewrite to utilize Linux LED subsystem

   - switch to generic mmap top-down layout and brk randomization

   - kernel startup cleanup by loading most drivers via arch_initcall()"

* tag 'parisc-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (31 commits)
  parisc: ccio-dma: Create private runway procfs root entry
  parisc: chassis: Do not overwrite string on LCD display
  parisc: led: Rewrite LED/LCD driver to utilizize Linux LED subsystem
  parisc: led: Fix LAN receive and transmit LEDs
  parisc: lasi: Initialize LASI driver via arch_initcall()
  parisc: asp: Initialize asp driver via arch_initcall()
  parisc: wax: Initialize wax driver via arch_initcall()
  parisc: iosapic: Convert I/O Sapic driver to use arch_initcall()
  parisc: sba_iommu: Convert SBA IOMMU driver to use arch_initcall()
  parisc: led: Move register_led_regions() to late_initcall()
  parisc: lba: Convert LBA PCI bus driver to use arch_initcall()
  parisc: gsc: Convert GSC bus driver to use arch_initcall()
  parisc: ccio: Convert CCIO driver to use arch_initcall()
  parisc: eisa: Convert HP EISA bus driver to use arch_initcall()
  parisc: hppb: Convert HP PB bus driver to use arch_initcall()
  parisc: dino: Convert dino PCI bus driver to use arch_initcall()
  parisc: Makefile: Adjust order in which drivers should be loaded
  parisc: led: Reduce CPU overhead for disk & lan LED computation
  parisc: Avoid ioremap() for same addresss in iosapic_register()
  parisc: unaligned: Simplify 32-bit assembly in emulate_std()
  ...

Pull superblock fixes from Christian Brauner:
 "Two follow-up fixes for the super work this cycle:

   - Move a misplaced lockep assertion before we potentially free the
     object containing the lock.

   - Ensure that filesystems which match superblocks in sget{_fc}()
     based on sb->s_fs_info are guaranteed to see a valid sb->s_fs_info
     as long as a superblock still appears on the filesystem type's
     superblock list.

     What we want as a proper solution for next cycle is to split
     sb->free_sb() out of sb->kill_sb() so that we can simply call
     kill_super_notify() after sb->kill_sb() but before sb->free_sb().

     Currently, this is lumped together in sb->kill_sb()"

* tag 'v6.6-vfs.super.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  super: ensure valid info
  super: move lockdep assert

Pull networking updates from Paolo Abeni:
 "Core:

   - Increase size limits for to-be-sent skb frag allocations. This
     allows tun, tap devices and packet sockets to better cope with
     large writes operations

   - Store netdevs in an xarray, to simplify iterating over netdevs

   - Refactor nexthop selection for multipath routes

   - Improve sched class lifetime handling

   - Add backup nexthop ID support for bridge

   - Implement drop reasons support in openvswitch

   - Several data races annotations and fixes

   - Constify the sk parameter of routing functions

   - Prepend kernel version to netconsole message

  Protocols:

   - Implement support for TCP probing the peer being under memory
     pressure

   - Remove hard coded limitation on IPv6 specific info placement inside
     the socket struct

   - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
     socket scaling factor

   - Scaling-up the IPv6 expired route GC via a separated list of
     expiring routes

   - In-kernel support for the TLS alert protocol

   - Better support for UDP reuseport with connected sockets

   - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
     header size

   - Get rid of additional ancillary per MPTCP connection struct socket

   - Implement support for BPF-based MPTCP packet schedulers

   - Format MPTCP subtests selftests results in TAP

   - Several new SMC 2.1 features including unique experimental options,
     max connections per lgr negotiation, max links per lgr negotiation

  BPF:

   - Multi-buffer support in AF_XDP

   - Add multi uprobe BPF links for attaching multiple uprobes and usdt
     probes, which is significantly faster and saves extra fds

   - Implement an fd-based tc BPF attach API (TCX) and BPF link support
     on top of it

   - Add SO_REUSEPORT support for TC bpf_sk_assign

   - Support new instructions from cpu v4 to simplify the generated code
     and feature completeness, for x86, arm64, riscv64

   - Support defragmenting IPv(4|6) packets in BPF

   - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
     perf+libbpf issue related to custom section handling

   - Introduce bpf map element count and enable it for all program types

   - Add a BPF hook in sys_socket() to change the protocol ID from
     IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

   - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

   - Add uprobe support for the bpf_get_func_ip helper

   - Check skb ownership against full socket

   - Support for up to 12 arguments in BPF trampoline

   - Extend link_info for kprobe_multi and perf_event links

  Netfilter:

   - Speed-up process exit by aborting ruleset validation if a fatal
     signal is pending

   - Allow NLA_POLICY_MASK to be used with BE16/BE32 types

  Driver API:

   - Page pool optimizations, to improve data locality and cache usage

   - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
     need for raw ioctl() handling in drivers

   - Simplify genetlink dump operations (doit/dumpit) providing them the
     common information already populated in struct genl_info

   - Extend and use the yaml devlink specs to [re]generate the split ops

   - Introduce devlink selective dumps, to allow SF filtering SF based
     on handle and other attributes

   - Add yaml netlink spec for netlink-raw families, allow route, link
     and address related queries via the ynl tool

   - Remove phylink legacy mode support

   - Support offload LED blinking to phy

   - Add devlink port function attributes for IPsec

  New hardware / drivers:

   - Ethernet:
      - Broadcom ASP 2.0 (72165) ethernet controller
      - MediaTek MT7988 SoC
      - Texas Instruments AM654 SoC
      - Texas Instruments IEP driver
      - Atheros qca8081 phy
      - Marvell 88Q2110 phy
      - NXP TJA1120 phy

   - WiFi:
      - MediaTek mt7981 support

   - Can:
      - Kvaser SmartFusion2 PCI Express devices
      - Allwinner T113 controllers
      - Texas Instruments tcan4552/4553 chips

   - Bluetooth:
      - Intel Gale Peak
      - Qualcomm WCN3988 and WCN7850
      - NXP AW693 and IW624
      - Mediatek MT2925

  Drivers:

   - Ethernet NICs:
      - nVidia/Mellanox:
         - mlx5:
            - support UDP encapsulation in packet offload mode
            - IPsec packet offload support in eswitch mode
            - improve aRFS observability by adding new set of counters
            - extends MACsec offload support to cover RoCE traffic
            - dynamic completion EQs
         - mlx4:
            - convert to use auxiliary bus instead of custom interface
              logic
      - Intel
         - ice:
            - implement switchdev bridge offload, even for LAG
              interfaces
            - implement SRIOV support for LAG interfaces
         - igc:
            - add support for multiple in-flight TX timestamps
      - Broadcom:
         - bnxt:
            - use the unified RX page pool buffers for XDP and non-XDP
            - use the NAPI skb allocation cache
      - OcteonTX2:
         - support Round Robin scheduling HTB offload
         - TC flower offload support for SPI field
      - Freescale:
         - add XDP_TX feature support
      - AMD:
         - ionic: add support for PCI FLR event
         - sfc:
            - basic conntrack offload
            - introduce eth, ipv4 and ipv6 pedit offloads
      - ST Microelectronics:
         - stmmac: maximze PTP timestamping resolution

   - Virtual NICs:
      - Microsoft vNIC:
         - batch ringing RX queue doorbell on receiving packets
         - add page pool for RX buffers
      - Virtio vNIC:
         - add per queue interrupt coalescing support
      - Google vNIC:
         - add queue-page-list mode support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add port range matching tc-flower offload
         - permit enslavement to netdevices with uppers

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - convert to phylink_pcs
      - Renesas:
         - r8A779fx: add speed change support
         - rzn1: enables vlan support

   - Ethernet PHYs:
      - convert mv88e6xxx to phylink_pcs

   - WiFi:
      - Qualcomm Wi-Fi 7 (ath12k):
         - extremely High Throughput (EHT) PHY support
      - RealTek (rtl8xxxu):
         - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
           RTL8192EU and RTL8723BU
      - RealTek (rtw89):
         - Introduce Time Averaged SAR (TAS) support

   - Connector:
      - support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
  net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
  net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
  net: stmmac: clarify difference between "interface" and "phy_interface"
  r8152: add vendor/device ID pair for D-Link DUB-E250
  devlink: move devlink_notify_register/unregister() to dev.c
  devlink: move small_ops definition into netlink.c
  devlink: move tracepoint definitions into core.c
  devlink: push linecard related code into separate file
  devlink: push rate related code into separate file
  devlink: push trap related code into separate file
  devlink: use tracepoint_enabled() helper
  devlink: push region related code into separate file
  devlink: push param related code into separate file
  devlink: push resource related code into separate file
  devlink: push dpipe related code into separate file
  devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
  devlink: push shared buffer related code into separate file
  devlink: push port related code into separate file
  devlink: push object register/unregister notifications into separate helpers
  inet: fix IP_TRANSPARENT error handling
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Move crypto engine callback from tfm ctx into algorithm object
   - Fix atomic sleep bug in crypto_destroy_instance
   - Move lib/mpi into lib/crypto

  Algorithms:
   - Add chacha20 and poly1305 implementation for powerpc p10

  Drivers:
   - Add AES skcipher and aead support to starfive
   - Add Dynamic Boost Control support to ccp
   - Add support for STM32P13 platform to stm32"

* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
  Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  crypto: chelsio - Remove unused declarations
  X.509: if signature is unsupported skip validation
  crypto: qat - fix crypto capability detection for 4xxx
  crypto: drivers - Explicitly include correct DT includes
  crypto: engine - Remove crypto_engine_ctx
  crypto: zynqmp - Use new crypto_engine_op interface
  crypto: virtio - Use new crypto_engine_op interface
  crypto: stm32 - Use new crypto_engine_op interface
  crypto: jh7110 - Use new crypto_engine_op interface
  crypto: rk3288 - Use new crypto_engine_op interface
  crypto: omap - Use new crypto_engine_op interface
  crypto: keembay - Use new crypto_engine_op interface
  crypto: sl3516 - Use new crypto_engine_op interface
  crypto: caam - Use new crypto_engine_op interface
  crypto: aspeed - Remove non-standard sha512 algorithms
  crypto: aspeed - Use new crypto_engine_op interface
  crypto: amlogic - Use new crypto_engine_op interface
  crypto: sun8i-ss - Use new crypto_engine_op interface
  crypto: sun8i-ce - Use new crypto_engine_op interface
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have a lot of code refactoring using common helpers and ended up
  removing more lines then we're adding this release cycle.

  Nothing really stands out, just small updates all over the place.

  Core GPIOLIB updates:
   - wake-up poll() in user-space on device unbind
   - improve fwnode usage
   - interrupt domain handling improvements
   - correctly handle the ngpios property in gpio-mmio

  Driver cleanups:
   - remove unneeded calls to platform_set_drvdata() all around the
     place
   - remove unneeded of_match_ptr() expansions whenever a driver depends
     on CONFIG_OF
   - remove redundant calls to dev_err_probe() from gpio-omap and
     gpio-davinci

  Driver improvements:
   - use autopointers and guards from cleanup.h in gpio-sim
   - shrink code in gpio-sim using some common helpers
   - convert the idio family of drivers to using gpio-regmap
   - convert gpio-ws16c48 to using gpio-regmap
   - use devres to simplify code in gpio-pisosr and gpio-mxc
   - update gpio-sifive: support IRQ wake, improve interrupt handling,
     allow building as module
   - make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
     tweaks)
   - add support for new models in gpio-pca953x and gpio-ds4520
   - add runtime PM support to gpio-mxc
   - fix a build warning in gpio-mxs
   - add support for adding pin ranges to gpio-mlxbf3
   - add counter/timer support to gpio-104-dio-48e
   - switch to dynamic GPIO base allocation in gpio-vf610
   - minor oneliners here and there

  Device-tree bindings updates:
   - enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
   - document new models in fsl-imx-gpio, ds4520 and pca95xx
   - convert the bindings for brcm,kona-gpio to YAML"

* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
  gpio: pca953x: add support for TCA9538
  dt-bindings: gpio: pca95xx: document new tca9538 chip
  gpio: pca953x: Use i2c_get_match_data()
  gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
  gpio: pcf857x: Extend match data support for OF tables
  gpio: vf610: switch to dynamic allocat GPIO base
  gpiolib: provide and use gpiod_line_state_notify()
  gpio: cdev: wake up lineevent poll() on device unbind
  gpio: cdev: wake up linereq poll() on device unbind
  gpio: cdev: wake up chardev poll() on device unbind
  gpiolib: add a second blocking notifier to struct gpio_device
  gpio: cdev: open-code to_gpio_chardev_data()
  gpiolib: rename the gpio_device notifier
  gpio: mlxbf3: Support add_pin_ranges()
  gpio: mxc: Use helper function devm_clk_get_optional_enabled()
  gpio: pca9570: fix kerneldoc
  gpio: sim: simplify code with cleanup helpers
  gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
  gpio: sim: simplify gpio_sim_device_config_live_store()
  gpio: mxc: release the parent IRQ in runtime suspend
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Renesas HS3001

  Chip support added to existing drivers:

   - pmbus/mp2975 driver now supports MP2971 and MP2973

  Functional improvements:

   - Additional voltage and temperature sensor support for
     NCT6798/NCT6799 in nt6755 driver

   - it87 driver now detects AMDTSI sensor type

   - dimmtemp now supports more than 32 DIMMs

  Driver removals:

   - sm665 driver removed as unsupportable and long since obsolete

  .. and minor fixes, cleanups, and simplifications in several drivers"

* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
  hwmon: (tmp513) Simplify probe()
  hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
  hwmon: (mlxreg-fan) Extend number of supported fans
  hwmon: (sis5595) Do PCI error checks on own line
  hwmon: (vt8231) Do PCI error checks on own line
  hwmon: (via686a) Do PCI error checks on own line
  hwmon: pmbus: Fix -EIO seen on pli1209
  hwmon: pmbus: Drop unnecessary clear fault page
  hwmon: pmbus: Reduce clear fault page invocations
  hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
  hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Convert drivers to use the ->remove_new() callback
   - Propagate the removable attribute for the card's device

  MMC host:
   - Convert drivers to use the ->remove_new() callback
   - atmel-mci: Convert to gpio descriptors and cleanup the code
   - davinci: Make SDIO irq truly optional
   - renesas_sdhi: Register irqs before registering controller
   - sdhci: Simplify the sdhci_pltfm_* interface a bit
   - sdhci-esdhc-imx: Improve support for the 1.8V errata
   - sdhci-of-at91: Add support for the microchip sam9x7 variant
   - sdhci-of-dwcmshc: Add support for runtime PM
   - sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant
   - sdhci-sprd: Add support for SD high-speed mode tuning
   - uniphier-sd: Register irqs before registering controller"

* tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
  mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib
  mmc: atmel-mci: move atmel MCI header file
  mmc: atmel-mci: Convert to gpio descriptors
  mmc: sdhci-sprd: Add SD HS mode online tuning
  mmc: core: Add host specific tuning support for SD HS mode
  mmc: sdhci-of-dwcmshc: Add runtime PM operations
  mmc: sdhci-of-dwcmshc: Add error handling in dwcmshc_resume
  mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450
  mmc: sdhci-pltfm: Rename sdhci_pltfm_register()
  mmc: sdhci-pltfm: Remove sdhci_pltfm_unregister()
  mmc: sdhci-st: Use sdhci_pltfm_remove()
  mmc: sdhci-pxav2: Use sdhci_pltfm_remove()
  mmc: sdhci-of-sparx5: Use sdhci_pltfm_remove()
  mmc: sdhci-of-hlwd: Use sdhci_pltfm_remove()
  mmc: sdhci-of-esdhc: Use sdhci_pltfm_remove()
  mmc: sdhci-of-at91: Use sdhci_pltfm_remove()
  mmc: sdhci-of-arasan: Use sdhci_pltfm_remove()
  mmc: sdhci-iproc: Use sdhci_pltfm_remove()
  mmc: sdhci_f_sdh30: Use sdhci_pltfm_remove()
  mmc: sdhci-dove: Use sdhci_pltfm_remove()
  ...

Pull spi updates from Mark Brown:
 "There's been quite a lot of generic activity here, but more
  administrative than featuers. We also have a bunch of new drivers,
  including one that's part of a MFD so we pulled in the core parts of
  that:

   - Lots of work from both Yang Yingliang and Andy Shevchenko on moving
     to host/device/controller based terminology for devices.

   - QuadSPI SPI support for Allwinner sun6i.

   - New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
     QuPv3 and StarFive JH7110 QSPI"

* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
  spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
  spi: spi-sn-f-ospi: switch to use modern name
  spi: sifive: switch to use modern name
  spi: sh: switch to use modern name
  spi: sh-sci: switch to use modern name
  spi: sh-msiof: switch to use modern name
  spi: sh-hspi: switch to use modern name
  spi: sc18is602: switch to use modern name
  spi: s3c64xx: switch to use modern name
  spi: rzv2m-csi: switch to use devm_spi_alloc_host()
  spi: rspi: switch to use spi_alloc_host()
  spi: rockchip: switch to use modern name
  spi: rockchip-sfc: switch to use modern name
  spi: realtek-rtl: switch to use devm_spi_alloc_host()
  spi: rb4xx: switch to use modern name
  spi: qup: switch to use modern name
  spi: spi-qcom-qspi: switch to use modern name
  spi: pxa2xx: switch to use modern name
  spi: ppc4xx: switch to use modern name
  spi: spl022: switch to use modern name
  ...

Pull regulator updates from Mark Brown:
 "Other than new device support and some minor fixes this has been a
  really quiet release, the only notable things are the new drivers.

  There's a couple of MFDs among the new devices so the generic parts
  are pulled in:

   - Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
     PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
     Instruments TPS65086"

* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
  regulator: userspace-consumer: Drop event support for this cycle
  regulator: aw37503: Switch back to use struct i2c_driver's .probe()
  dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
  regulator: dt-bindings: Add Awinic AW37503
  regulator: aw37503: add regulator driver for Awinic AW37503
  regulator: tps65086: Select dedicated regulator config for chip variant
  mfd: tps65086: Read DEVICE ID register 1 from device
  regulator: raa215300: Update help description
  regulator: raa215300: Add missing blank space
  regulator: raa215300: Change rate from 32000->32768
  regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
  regulator: raa215300: Add const definition
  regulator: raa215300: Fix resource leak in case of error
  regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
  regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
  regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
  regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
  regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
  regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
  regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
  ...

Using kmalloc() to allocate the decompression workspace for zstd may
trigger the following warning when large modules are loaded (i.e., xfs):

[    2.961884] WARNING: CPU: 1 PID: 254 at mm/page_alloc.c:4453 __alloc_pages+0x2c3/0x350
...
[    2.989033] Call Trace:
[    2.989841]  <TASK>
[    2.990614]  ? show_regs+0x6d/0x80
[    2.991573]  ? __warn+0x89/0x160
[    2.992485]  ? __alloc_pages+0x2c3/0x350
[    2.993520]  ? report_bug+0x17e/0x1b0
[    2.994506]  ? handle_bug+0x51/0xa0
[    2.995474]  ? exc_invalid_op+0x18/0x80
[    2.996469]  ? asm_exc_invalid_op+0x1b/0x20
[    2.997530]  ? module_zstd_decompress+0xdc/0x2a0
[    2.998665]  ? __alloc_pages+0x2c3/0x350
[    2.999695]  ? module_zstd_decompress+0xdc/0x2a0
[    3.000821]  __kmalloc_large_node+0x7a/0x150
[    3.001920]  __kmalloc+0xdb/0x170
[    3.002824]  module_zstd_decompress+0xdc/0x2a0
[    3.003857]  module_decompress+0x37/0xc0
[    3.004688]  init_module_from_file+0xd0/0x100
[    3.005668]  idempotent_init_module+0x11c/0x2b0
[    3.006632]  __x64_sys_finit_module+0x64/0xd0
[    3.007568]  do_syscall_64+0x59/0x90
[    3.008373]  ? ksys_read+0x73/0x100
[    3.009395]  ? exit_to_user_mode_prepare+0x30/0xb0
[    3.010531]  ? syscall_exit_to_user_mode+0x37/0x60
[    3.011662]  ? do_syscall_64+0x68/0x90
[    3.012511]  ? do_syscall_64+0x68/0x90
[    3.013364]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8

However, continuous physical memory does not seem to be required in
module_zstd_decompress(), so use vmalloc() instead, to prevent the
warning and avoid potential failures at loading compressed modules.

Fixes: 169a58ad

 ("module/decompress: Support zstd in-kernel decompression")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Pull regmap updates from Mark Brown:
 "This is a much quieter release than the past few, there's one small
  API addition that I noticed a user for in ALSA and a bunch of
  cleanups:

   - Provide an interface for determining if a register is present in
     the cache and add a user of it in ALSA.

   - Full support for dynamic allocations, following the temporary
     bodges that were done as fixes in the previous release.

   - Remove the unused and questionably working 64 bit support"

* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix the type used for a bitmap pointer
  regmap: Remove dynamic allocation warnings for rbtree and maple
  regmap: rbtree: Use alloc_flags for memory allocations
  regmap: maple: Use alloc_flags for memory allocations
  regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
  ALSA: hda: Use regcache_reg_cached() rather than open coding
  regmap: Provide test for regcache_reg_present()
  regmap: Let users check if a register is cached
  regmap: Provide user selectable option to enable regmap
  regmap: mmio: Remove unused 64-bit support code
  regmap: cache: Revert "Add 64-bit mode support"
  regmap: Revert "add 64-bit mode support" and Co.

Pull HSI update from Sebastian Reichel:

 - explicitly include correct DT includes

* tag 'hsi-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  hsi: omap_ssi: Explicitly include correct DT includes