We should always use bitmask ops, rather than depend on some ordering of
the different states.  With the TASK_NONINTERACTIVE flag, the inequality
doesn't really work.

Oleg Nesterov argues (likely correctly) that this test is unnecessary in
the first place.  However, the minimal fix for now is to at least make
it work in the presense of TASK_NONINTERACTIVE.  Waiting for consensus
from Roland & co on potential bigger cleanups.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use '#ifdef' consistently on __KERNEL__.  This was reported as bug #5340
(isn't easier to send a fix than report the bug?!)

Signed-off-by: Diego Calleja <diegocg@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The incorrect kprobe_mutex usage on x86_64 had percolated to ppc64 too.
First noticed by Yanmin Zhang.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Serial port only needs 32 bytes of resource space but we are currently
asking for 64K.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
[ diff went missing first time due to corrupted patch ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Tone down the r8169 driver

As an alternative, people can use the boot time 'debug' option and/or use
'ethtool -s ethX msglvl xyz'.  The different messages are listed at:
http://www.zoreil.com/~romieu/r8169/doc/msglvl.txt



Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The old 550Mhz titanium powerbook can switch to a lower frequency
(500Mhz). A user has been repeately reporting overtemp conditions on his
machine at high speed so this simple patch adds support to PowerMac
cpufreq for this machine. The difference in frequency isn't big but seem
enough to fix that user's problems. The patch has been around for some
time now and doesn't seem to cause any problem, so I suppose it could go
in now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alain RICHARD <alain.richard@equation.fr>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Serial port only needs 32 bytes of resource space but we are currently
asking for 64K.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The tests Alok carried out on Petr's box confirmed that cpu_to_node[BP] is
not setup early enough by numa_init_array due to the x86_64 changes in
2.6.14-rc*, and unfortunately set wrongly by the work around code in
numa_init_array().  cpu_to_node[0] gets set with 1 early and later gets set
properly to 0 during identify_cpu() when all cpus are brought up, but
confusing the numa slab in the process.

Here is a quick fix for this.  The right fix obviously is to have
cpu_to_node[bsp] setup early for numa_init_array().  The following patch
will fix the problem now, and the code can stay on even when
cpu_to_node{BP] gets fixed early correctly.

Thanks to Petr for access to his box.

Signed off by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix the BP node_to_cpumask.  2.6.14-rc* broke the boot cpu bit as the
cpu_to_node(0) is now not setup early enough for numa_init_array.
cpu_to_node[] is setup much later at srat_detect_node on acpi srat based
em64t machines.  This seems like a problem on amd machines too, Tested on
em64t though.  /sys/devices/system/node/node0/cpumap shows up sanely after
this patch.

Signed off by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The up()/down() orders are incorrect in arch/x86_64/kprobes.c file.
kprobe_mutext is used to protect the free kprobe instruction slot list.
arch_prepare_kprobe applies for a slot from the free list, and
arch_remove_kprobe returns a slot to the free list.  The incorrect up()/down()
orders to operate on kprobe_mutex fail to protect the free list.  If 2 threads
try to get/return kprobe instruction slot at the same time, the free slot list
might be broken, or a free slot might be applied by 2 threads.

Signed-off-by: Zhang Yanmin <Yanmin.zhang@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

less noise in dmesg

Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

amdtp, dv1394, raw1394, video1394:

Delete legacy module aliases.  The macros did not work and the aliases are not
needed nowadays.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Work around limitation in rawiso routines.  Required with 1394b cards on
architectures where PAGE_SIZE is 4096.  Based on a previous patch by Ben
Collins.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove superfluous include.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

trivial edits of a few comments

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use of time_before() macro, defined at linux/jiffies.h, which deal with
wrapping correctly and are nicer to read.

Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix debug code so it prints the correct speed (was defaulting to 100, so
anything > 400 showed only 100).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Skip a superfluous pause that occured when the config ROM of a node was
scanned unsuccessfully.  This also occurs if a node without link wrongly
enables its "link active" self ID flag.  A GWCTech 6-port hub does this.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Units were not detected if the local IRM performed a bus reset.  ("The root
node is not cycle master capable; selecting a new root node and resetting...",
often seen with iPods and other SBP-2 devices).  Rearrange the order of IRM
duties and node scanning.  TODO: Audit the ROM caching and parsing code for
underlying issues.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Set serialize_io=1 by default.  This is safer and required by seemingly more
and more hardware.  It causes little or no performance loss for S400 devices.
Performance of S800 1394b devices may drop by 25...30%.  Therefore make the
parameter's description and dmesg message clearer about performance impact.

Update description of the max_speed parameter too.  IEEE1394_SPEED_MAX is
currently S800.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixes for deadlocks of the ieee1394 and scsi subsystems and long delays in
futile error recovery attempts when SBP-2 devices are removed or drivers are
unloaded.

 - Complete commands quickly with DID_NO_CONNECT if the 1394 node is gone or if
   the 1394 low-level driver was unloaded.
 - Skip unnecessary work in the eh_abort_handler and eh_device_reset_handler if
   the node or 1394 low-level driver is gone.
 - Let scsi's high-level shut down gracefully when sbp2 is being unloaded or
   detached from the 1394 unit. A call to scsi_remove_device is added for this
   purpose, which requires us to store a scsi_device pointer.
 - scsi_device pointer is obtained from slave_alloc hook and cleared by
   slave_destroy. This avoids usage of the pointer after the scsi device was
   deleted e.g. by the user via scsi_mod's sysfs interface.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This change removes a bogus error message from the IOC4 serial driver
interrupt handler.

This error message is bogus for two reasons.  First, it can never occur
given that current code takes care to initialize IOC4 in such a way that
these "unknown" interrupts could never occur.  Second, this code fails to
take into account that other drivers can share the IOC4 interrupt mechanism
through SA_SHIRQ, and thus this driver is not in-fact "all-knowing".

Finally, this error message triggers every time some "unknown" interrupt
occurs -- it's not rate limited or repetition limited in any way, thereby
effectively denying use of the console device.  Given its bogosity in the
first place, it's best to just get rid of it entirely.

Acked-by: Pat Gefre <pfg@sgi.com>
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Check O_DIRECT and return -EINVAL error in open.  dentry_open() also checks
this but only after the open method is called.  This patch optimizes away
the unnecessary upcalls in this case.

It could be a correctness issue too: if filesystem has open() with side
effect, then it should fail before doing the open, not after.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Calling truncate() on hostfs spits a kernel warning "Something isn't
implemented here", but it still works fine.

Indeed, hostfs i_op->truncate doesn't do anything.  But hostfs_setattr() ->
set_attr() correctly detects ATTR_SIZE and calls truncate() on the host.  So
we should be safe (using ftruncate() may be better, in case the file is
unlinked on the host, but we aren't sure to have the file open for writing,
and reopening it would cause the same races; plus nobody should expect UML to
be so careful).

So, the warning is wrong, because the current implementation is working.  Al,
am I correct, and can the warning be therefore dropped?

CC: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert commit 12ebcd73

, i.e.  [PATCH] uml: run
mconsole "sysrq" in process context on request from Jeff Dike.

a) sysrq may be run when the scheduler is non-functioning

b) the warning I wanted to fix actually came from the fault handler run in
   atomic context.  But I fixed that not to take the semaphore in a separate
   patch.

c) the fault handler is run because of a fault, and that fault was
   unaffected by this patch.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

SEGV_MAYBE_FIXABLE tests ptrace_faultinfo, and depends on it being 1 only in
SKAS3 mode, while currently when running with mode=tt it will be 1 anyway.
Fix this, and do the same for proc_mm.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I hadn't been running a SKAS3 host when testing the "uml: fix hang in TT mode
on fault" patch (commit 546fe1cb

), and I
didn't think enough to the missing trap_no in SKAS3 mode.

In fact, the resulting kernel doesn't work at all in SKAS3 mode.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

GPIO fix for the composite and tv mute states of bt8xx card #135: DViCO
FusionHDTV5 Lite.  Without this patch, selecting one of these states could
produce unexpected behavior.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

include/asm/hw_irq.h:70: warning: `struct hw_interrupt_type' declared inside parameter list
include/asm/hw_irq.h:70: warning: its scope is only this definition or declaration, which is probably not what you want

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Recently aio_p{read,write} changed to perform retries internally rather
than returning -EIOCBRETRY.  This inadvertantly resulted in always calling
aio_{read,write} with ki_left at 0 which would in turn immediately return
0.  Harmless, but we can avoid this call by checking in the caller.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Benjamin LaHaise <bcrl@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Only one of the run or kick path is supposed to put an iocb on the run
list.  If both of them do it than one of them can end up referencing a
freed iocb.  The kick path could delete the task_list item from the wait
queue before getting the ctx_lock and putting the iocb on the run list.
The run path was testing the task_list item outside the lock so that it
could catch ki_retry methods that return -EIOCBRETRY *without* putting the
iocb on a wait queue and promising to call kick_iocb.  This unlocked check
could then race with the kick path to cause both to try and put the iocb on
the run list.

The patch stops the run path from testing task_list by requring that any
ki_retry that returns -EIOCBRETRY *must* guarantee that kick_iocb() will be
called in the future.  aio_p{read,write}, the only in-tree -EIOCBRETRY
users, are updated.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Benjamin LaHaise <bcrl@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Only one of the run or kick path is supposed to put an iocb on the run
list.  If both of them do it than one of them can end up referencing a
freed iocb.  The kick patch could set the Kicked bit before acquiring the
ctx_lock and putting the iocb on the run list.  The run path, while holding
the ctx_lock, could see this partial kick and mistake it for a kick that
was deferred while it was doing work with the run_list NULLed out.  It
would then race with the kick thread to add the iocb to the run list.

This patch moves the kick setting under the ctx_lock so that only one of
the kick or run path queues the iocb on the run list, as intended.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Benjamin LaHaise <bcrl@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

As requested by Thomas Gleixner <tglx@linutronix.de>:

  "5d3d0f77

 breaks a couple of ARM
   boards, which depend on the historical bootmem allocation order.
   There is a cleaner solution around to remove the pgdat list
   completely, but this is a topic for post 2.6.14

   Andi signalled ACK already."

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The following patch updates the way SELinux classifies and handles IP
based protocols.

Currently, IP sockets are classified by SELinux as being either TCP, UDP
or 'Raw', the latter being a default for IP socket that is not TCP or UDP.

The classification code is out of date and uses only the socket type
parameter to socket(2) to determine the class of IP socket.  So, any
socket created with SOCK_STREAM will be classified by SELinux as TCP, and
SOCK_DGRAM as UDP.  Also, other socket types such as SOCK_SEQPACKET and
SOCK_DCCP are currently ignored by SELinux, which classifies them as
generic sockets, which means they don't even get basic IP level checking.

This patch changes the SELinux IP socket classification logic, so that
only an IPPROTO_IP protocol value passed to socket(2) classify the socket
as TCP or UDP.  The patch also drops the check for SOCK_RAW and converts
it into a default, so that socket types like SOCK_DCCP and SOCK_SEQPACKET
are classified as SECCLASS_RAWIP_SOCKET (instead of generic sockets).

Note that protocol-specific support for SCTP, DCCP etc. is not addressed
here, we're just getting these protocols checked at the IP layer.

This fixes a reported problem where SCTP sockets were being recognized as
generic SELinux sockets yet still being passed in one case to an IP level
check, which then fails for generic sockets.

It will also fix bugs where any SOCK_STREAM socket is classified as TCP or
any SOCK_DGRAM socket is classified as UDP.

This patch also unifies the way IP sockets classes are determined in
selinux_socket_bind(), so we use the already calculated value instead of
trying to recalculate it.

Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I need the following patch to compile -git8 here, otherwise these
files fail to compile (asm/hw_irq.h needs definitions from
linux/irq.h and that file provides the required include ordering).

I did not do a full audit, though there looks to be many other
places that should get the same treatment, if this is  the right
way to do it.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

the free_irq() in USB suspend breaks resume on some setups where USB
(ohci/ehci) shares the interrupt with an other device.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

x86-64: Add missing () around arguments of pte_index macro

Signed-Off-By: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>