Pull perf updates from Ingo Molnar:
 "The main changes in this cycle on the kernel side:

   - rework kprobes blacklist handling (Masami Hiramatsu)

   - misc cleanups

  on the tooling side these areas were the main focus:

   - 'perf trace'     enhancements (Arnaldo Carvalho de Melo)

   - 'perf bench'     enhancements (Davidlohr Bueso)

   - 'perf record'    enhancements (Alexey Budankov)

   - 'perf annotate'  enhancements (Jin Yao)

   - 'perf top'       enhancements (Jiri Olsa)

   - Intel hw tracing enhancements (Adrian Hunter)

   - ARM hw tracing   enhancements (Leo Yan, Mathieu Poirier)

   - ... plus lots of other enhancements, cleanups and fixes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (171 commits)
  tools uapi asm: Update asm-generic/unistd.h copy
  perf symbols: Relax checks on perf-PID.map ownership
  perf trace: Wire up the fadvise 'advice' table generator
  perf beauty: Add generator for fadvise64's 'advice' arg constants
  tools headers uapi: Grab a copy of fadvise.h
  perf beauty mmap: Print mmap's 'offset' arg in hexadecimal
  perf beauty mmap: Print PROT_READ before PROT_EXEC to match strace output
  perf trace beauty: Beautify arch_prctl()'s arguments
  perf trace: When showing string prefixes show prefix + ??? for unknown entries
  perf trace: Move strarrays to beauty.h for further reuse
  perf beauty: Wire up the x86_arch prctl code table generator
  perf beauty: Add a string table generator for x86's 'arch_prctl' codes
  tools include arch: Grab a copy of x86's prctl.h
  perf trace: Show NULL when syscall pointer args are 0
  perf trace: Enclose the errno strings with ()
  perf augmented_raw_syscalls: Copy 'access' arg as well
  perf trace: Add alignment spaces after the closing parens
  perf trace beauty: Print O_RDONLY when (flags & O_ACCMODE) == 0
  perf trace: Allow asking for not suppressing common string prefixes
  perf trace: Add a prefix member to the strarray class
  ...

Pull locking updates from Ingo Molnar:
 "The main change in this cycle are initial preparatory bits of dynamic
  lockdep keys support from Bart Van Assche.

  There are also misc changes, a comment cleanup and a data structure
  cleanup"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Clean up comment in nohz_idle_balance()
  locking/lockdep: Stop using RCU primitives to access 'all_lock_classes'
  locking/lockdep: Make concurrent lockdep_reset_lock() calls safe
  locking/lockdep: Remove a superfluous INIT_LIST_HEAD() statement
  locking/lockdep: Introduce lock_class_cache_is_registered()
  locking/lockdep: Inline __lockdep_init_map()
  locking/lockdep: Declare local symbols static
  tools/lib/lockdep/tests: Test the lockdep_reset_lock() implementation
  tools/lib/lockdep: Add dummy print_irqtrace_events() implementation
  tools/lib/lockdep: Rename "trywlock" into "trywrlock"
  tools/lib/lockdep/tests: Run lockdep tests a second time under Valgrind
  tools/lib/lockdep/tests: Improve testing accuracy
  tools/lib/lockdep/tests: Fix shellcheck warnings
  tools/lib/lockdep/tests: Display compiler warning and error messages
  locking/lockdep: Remove ::version from lock_class structure

Pull EFI updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Allocate the E820 buffer before doing the
     GetMemoryMap/ExitBootServices dance so we don't run out of space

   - Clear EFI boot services mappings when freeing the memory

   - Harden efivars against callers that invoke it on non-EFI boots

   - Reduce the number of memblock reservations resulting from extensive
     use of the new efi_mem_reserve_persistent() API

   - Other assorted fixes and cleanups"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Don't unmap EFI boot services code/data regions for EFI_OLD_MEMMAP and EFI_MIXED_MODE
  efi: Reduce the amount of memblock reservations for persistent allocations
  efi: Permit multiple entries in persistent memreserve data structure
  efi/libstub: Disable some warnings for x86{,_64}
  x86/efi: Move efi_<reserve/free>_boot_services() to arch/x86
  x86/efi: Unmap EFI boot services code/data regions from efi_pgd
  x86/mm/pageattr: Introduce helper function to unmap EFI boot services
  efi/fdt: Simplify the get_fdt() flow
  efi/fdt: Indentation fix
  firmware/efi: Add NULL pointer checks in efivars API functions

Pull RCU updates from Ingo Molnar:
 "The biggest RCU changes in this cycle were:

   - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.

   - Replace calls of RCU-bh and RCU-sched update-side functions to
     their vanilla RCU counterparts. This series is a step towards
     complete removal of the RCU-bh and RCU-sched update-side functions.

     ( Note that some of these conversions are going upstream via their
       respective maintainers. )

   - Documentation updates, including a number of flavor-consolidation
     updates from Joel Fernandes.

   - Miscellaneous fixes.

   - Automate generation of the initrd filesystem used for rcutorture
     testing.

   - Convert spin_is_locked() assertions to instead use lockdep.

     ( Note that some of these conversions are going upstream via their
       respective maintainers. )

   - SRCU updates, especially including a fix from Dennis Krein for a
     bag-on-head-class bug.

   - RCU torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
  rcutorture: Don't do busted forward-progress testing
  rcutorture: Use 100ms buckets for forward-progress callback histograms
  rcutorture: Recover from OOM during forward-progress tests
  rcutorture: Print forward-progress test age upon failure
  rcutorture: Print time since GP end upon forward-progress failure
  rcutorture: Print histogram of CB invocation at OOM time
  rcutorture: Print GP age upon forward-progress failure
  rcu: Print per-CPU callback counts for forward-progress failures
  rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
  rcutorture: Dump grace-period diagnostics upon forward-progress OOM
  rcutorture: Prepare for asynchronous access to rcu_fwd_startat
  torture: Remove unnecessary "ret" variables
  rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
  rcutorture: Break up too-long rcu_torture_fwd_prog() function
  rcutorture: Remove cbflood facility
  torture: Bring any extra CPUs online during kernel startup
  rcutorture: Add call_rcu() flooding forward-progress tests
  rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
  tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
  net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
  ...

Pull x86 RAS updates from Borislav Petkov:
 "This time around we have a subsystem reorganization to offer, with the
  new directory being

    arch/x86/kernel/cpu/mce/

  and all compilation units' names streamlined under it"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Restore MCE injector's module name
  x86/mce: Unify pr_* prefix
  x86/mce: Streamline MCE subsystem's naming

Pull x86 microcode loading updates from Borislav Petkov:
 "This update contains work started by Maciej to make the microcode
  container verification more robust against all kinds of corruption and
  also unify verification paths between early and late loading.

  The result is a set of verification routines which validate the
  microcode blobs before loading it on the CPU. In addition, the code is
  a lot more streamlined and unified.

  In the process, some of the aspects of patch handling and loading were
  simplified.

  All provided by Maciej S. Szmigiero and Borislav Petkov"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/AMD: Update copyright
  x86/microcode/AMD: Check the equivalence table size when scanning it
  x86/microcode/AMD: Convert CPU equivalence table variable into a struct
  x86/microcode/AMD: Check microcode container data in the late loader
  x86/microcode/AMD: Fix container size's type
  x86/microcode/AMD: Convert early parser to the new verification routines
  x86/microcode/AMD: Change verify_patch()'s return value
  x86/microcode/AMD: Move chipset-specific check into verify_patch()
  x86/microcode/AMD: Move patch family check to verify_patch()
  x86/microcode/AMD: Simplify patch family detection
  x86/microcode/AMD: Concentrate patch verification
  x86/microcode/AMD: Cleanup verify_patch_size() more
  x86/microcode/AMD: Clean up per-family patch size checks
  x86/microcode/AMD: Move verify_patch_size() up in the file
  x86/microcode/AMD: Add microcode container verification
  x86/microcode/AMD: Subtract SECTION_HDR_SIZE from file leftover length

Pull x86 cache control updates from Borislav Petkov:

 - The generalization of the RDT code to accommodate the addition of
   AMD's very similar implementation of the cache monitoring feature.

   This entails a subsystem move into a separate and generic
   arch/x86/kernel/cpu/resctrl/ directory along with adding
   vendor-specific initialization and feature detection helpers.

   Ontop of that is the unification of user-visible strings, both in the
   resctrl filesystem error handling and Kconfig.

   Provided by Babu Moger and Sherry Hurwitz.

 - Code simplifications and error handling improvements by Reinette
   Chatre.

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Fix rdt_find_domain() return value and checks
  x86/resctrl: Remove unnecessary check for cbm_validate()
  x86/resctrl: Use rdt_last_cmd_puts() where possible
  MAINTAINERS: Update resctrl filename patterns
  Documentation: Rename and update intel_rdt_ui.txt to resctrl_ui.txt
  x86/resctrl: Introduce AMD QOS feature
  x86/resctrl: Fixup the user-visible strings
  x86/resctrl: Add AMD's X86_FEATURE_MBA to the scattered CPUID features
  x86/resctrl: Rename the config option INTEL_RDT to RESCTRL
  x86/resctrl: Add vendor check for the MBA software controller
  x86/resctrl: Bring cbm_validate() into the resource structure
  x86/resctrl: Initialize the vendor-specific resource functions
  x86/resctrl: Move all the macros to resctrl/internal.h
  x86/resctrl: Re-arrange the RDT init code
  x86/resctrl: Rename the RDT functions and definitions
  x86/resctrl: Rename and move rdt files to a separate directory

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - selftests improvements
   - large PUD support for HugeTLB
   - single-stepping fixes
   - improved tracing
   - various timer and vGIC fixes

  x86:
   - Processor Tracing virtualization
   - STIBP support
   - some correctness fixes
   - refactorings and splitting of vmx.c
   - use the Hyper-V range TLB flush hypercall
   - reduce order of vcpu struct
   - WBNOINVD support
   - do not use -ftrace for __noclone functions
   - nested guest support for PAUSE filtering on AMD
   - more Hyper-V enlightenments (direct mode for synthetic timers)

  PPC:
   -  nested VFIO

  s390:
   - bugfixes only this time"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
  KVM: x86: Add CPUID support for new instruction WBNOINVD
  kvm: selftests: ucall: fix exit mmio address guessing
  Revert "compiler-gcc: disable -ftracer for __noclone functions"
  KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines
  KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs
  KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
  MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry
  KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams
  KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()
  KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp()
  KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte()
  KVM: Make kvm_set_spte_hva() return int
  KVM: Replace old tlb flush function with new one to flush a specified range.
  KVM/MMU: Add tlb flush with range helper function
  KVM/VMX: Add hv tlb range flush support
  x86/hyper-v: Add HvFlushGuestAddressList hypercall support
  KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops
  KVM: x86: Disable Intel PT when VMXON in L1 guest
  KVM: x86: Set intercept for Intel PT MSRs read/write
  KVM: x86: Implement Intel PT MSRs read/write emulation
  ...

Pull xen updates from Juergen Gross:
 "Xen features and fixes:

   - a series to enable KVM guests to be booted by qemu via the Xen PVH
     boot entry for speeding up KVM guest tests

   - a series for a common driver to be used by Xen PV frontends (right
     now drm and sound)

   - two other fixes in Xen related code"

* tag 'for-linus-4.21-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  ALSA: xen-front: Use Xen common shared buffer implementation
  drm/xen-front: Use Xen common shared buffer implementation
  xen: Introduce shared buffer helpers for page directory...
  xen/pciback: Check dev_data before using it
  kprobes/x86/xen: blacklist non-attachable xen interrupt functions
  KVM: x86: Allow Qemu/KVM to use PVH entry point
  xen/pvh: Add memory map pointer to hvm_start_info struct
  xen/pvh: Move Xen code for getting mem map via hcall out of common file
  xen/pvh: Move Xen specific PVH VM initialization out of common file
  xen/pvh: Create a new file for Xen specific PVH code
  xen/pvh: Move PVH entry code out of Xen specific tree
  xen/pvh: Split CONFIG_XEN_PVH into CONFIG_PVH and CONFIG_XEN_PVH

Pull parisc updates from Helge Deller:
 "The major change in this patchset is the new system call table
  generation support from Firoz Khan"

* 'parisc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: syscalls: ignore nfsservctl for other architectures
  parisc: generate uapi header and system call table files
  parisc: add system call table generation support
  parisc: remove __NR_Linux from uapi header file.
  parisc: add __NR_syscalls along with __NR_Linux_syscalls
  parisc: move __IGNORE* entries to non uapi header
  parisc: Fix HP SDC hpa address output
  parisc: Fix serio address output
  parisc: Split out alternative live patching code

Pull MIPS updates from Paul Burton:
 "Here's the main MIPS pull for Linux 4.21. Core architecture changes
  include:

   - Syscall tables & definitions for unistd.h are now generated by
     scripts, providing greater consistency with other architectures &
     making it easier to add new syscalls.

   - Support for building kernels with no floating point support, upon
     which any userland attempting to use floating point instructions
     will receive a SIGILL. Mostly useful to shrink the kernel & as
     preparation for nanoMIPS support which does not yet include FP.

   - MIPS SIMD Architecture (MSA) vector register context is now exposed
     by ptrace via a new NT_MIPS_MSA regset.

   - ASIDs are now stored as 64b values even for MIPS32 kernels,
     expanding the ASID version field sufficiently that we don't need to
     worry about overflow & avoiding rare issues with reused ASIDs that
     have been observed in the wild.

   - The branch delay slot "emulation" page is now mapped without write
     permission for the user, preventing its use as a nice location for
     attacks to execute malicious code from.

   - Support for ioremap_prot(), primarily to allow gdb or other ptrace
     users the ability to view their tracee's memory using the same
     cache coherency attribute.

   - Optimizations to more cpu_has_* macros, allowing more to be
     compile-time constant where possible.

   - Enable building the whole kernel with UBSAN instrumentation.

   - Enable building the kernel with link-time dead code & data
     elimination.

  Platform specific changes include:

   - The Boston board gains a workaround for DMA prefetching issues with
     the EG20T Platform Controller Hub that it uses.

   - Cleanups to Cavium Octeon code removing about 20k lines of
     redundant code, mostly unused or duplicate register definitions in
     headers.

   - defconfig updates for the DECstation machines, including new
     defconfigs for r4k & 64b machines.

   - Further work on Loongson 3 support.

   - DMA fixes for SiByte machines"

* tag 'mips_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (95 commits)
  MIPS: math-emu: Write-protect delay slot emulation pages
  MIPS: Remove struct mm_context_t fp_mode_switching field
  mips: generate uapi header and system call table files
  mips: add system call table generation support
  mips: remove syscall table entries
  mips: add +1 to __NR_syscalls in uapi header
  mips: rename scall64-64.S to scall64-n64.S
  mips: remove unused macros
  mips: add __NR_syscalls along with __NR_Linux_syscalls
  MIPS: Expand MIPS32 ASIDs to 64 bits
  MIPS: OCTEON: delete redundant register definitions
  MIPS: OCTEON: cvmx_gmxx_inf_mode: use oldest forward compatible definition
  MIPS: OCTEON: cvmx_mio_fus_dat3: use oldest forward compatible definition
  MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition
  MIPS: OCTEON: octeon-usb: use common gpio_bit definition
  MIPS: OCTEON: enable all OCTEON drivers in defconfig
  mips: annotate implicit fall throughs
  MIPS: Hardcode cpu_has_mips* where target ISA allows
  MIPS: MT: Remove norps command line parameter
  MIPS: Only include mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y
  ...

Pull sparc updates from David Miller:

 - Automatic system call table generation, from Firoz Khan.

 - Clean up accesses to the OF device names by using full_name instead
   of path_component_name.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  ALSA: sparc: Use of_node_name_eq for node name comparisons
  sbus: Use of_node_name_eq for node name comparisons
  sparc: generate uapi header and system call table files
  sparc: add system call table generation support
  sparc: add __NR_syscalls along with NR_syscalls
  sparc: move __IGNORE* entries to non uapi header
  sparc: Use DT node full_name instead of name for resources
  sparc: Remove unused leon_trans_init
  sparc: Use device_type helpers to access the node type
  sparc: Use of_node_name_eq for node name comparisons
  sparc: Convert to using %pOFn instead of device_node.name
  sparc: prom: use property "name" directly to construct node names
  of: Drop full path from full_name for PDT systems
  sparc: Convert to using %pOF instead of full_name
  fs/openpromfs: Use of_node_name_eq for node name comparisons
  fs/openpromfs: use full_name instead of path_component_name

Merge tag 'riscv-for-linus-4.21-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "We don't have many patches for this merge window, probably because
  everything has been a bit busy with the holidays and conferences. The
  only big user-visible change is to move over to an SBI-based earlycon
  instead of our arch-specific early printk support.

  The only outstanding patch set I know of is the audit patch set, which
  I've managed to make a mess of and will attempt to clean up"

* tag 'riscv-for-linus-4.21-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Select GENERIC_SCHED_CLOCK for clocksource drivers
  RISC-V: lib: minor asm cleanup
  RISC-V: Update Kconfig to better handle CMDLINE
  riscv: remove unused variable in ftrace
  RISC-V: add of_node_put()
  RISC-V: Fix of_node_* refcount
  riscv, atomic: Add #define's for the atomic_{cmp,}xchg_*() variants
  RISC-V: Remove EARLY_PRINTK support
  RISC-V: defconfig: Enable RISC-V SBI earlycon support

Pull arch/microblaze updates from Michal Simek:

 - Fix multiple Kbuild/Makefile issues

 - Start to use system call table generation

* tag 'microblaze-v5.0-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: remove the explicit removal of system.dtb
  microblaze: fix race condition in building boot images
  microblaze: add linux.bin* and simpleImage.* to PHONY
  microblaze: fix multiple bugs in arch/microblaze/boot/Makefile
  microblaze: move "... is ready" messages to arch/microblaze/Makefile
  microblaze: adjust the help to the real behavior
  microblaze: generate uapi header and system call table files
  microblaze: add system call table generation support
  microblaze: move __NR_syscalls macro from asm/unistd.h
  microblaze: Typo s/use use/use/

Pull arch/sh syscall table scripting from Arnd Bergmann:
 "I worked with Firoz Khan to change all architectures to have their
  system call tables (syscall.S and asm/unistd.h) generated by a script
  from a more readable input file the same way that we already had on
  x86, s390 and arm.

  I offered to take those conversions through the asm-generic tree that
  did not get picked up by the architecture maintainers, and fortunately
  all but one have now been accepted into arch maintainer trees, so this
  branch only contains the conversion for arch/sh/, with permission from
  Rich.

  The conversion does not include the old 64-bit sh5 architecture, which
  has never shipped and not even compiled in a long time. The table in
  include/uapi/asm/unistd.h is also not included here, as Firoz is still
  working on that one, it will have to wait for the next following merge
  window, hopefully together with the addition of the 64-bit time_t
  system calls for the y2038 work that led to the system call table
  rework"

* tag 'asm-generic-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  sh: generate uapi header and syscall table header files
  sh: add system call table generation support
  sh: add __NR_syscalls along with NR_syscalls

Pull ia64 updates from Tony Luck:
 "Change ia64 to make it easier to update system call tables (in line
  with some other architectures).

  This is in preparation for y2038 changes which are forecasted to add
  several new system calls"

* tag 'please-pull-y2038prep' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: generate uapi header and system call table files
  ia64: add system call table generation support
  ia64: add an offset for system call number
  ia64: add __NR_syscalls along with NR_syscalls
  ia64: add __NR_old_getpagesize in uapi header file

Pull m68k updates from Geert Uytterhoeven:

 - Generate syscall headers

 - Small improvements and cleanups

 - defconfig updates

* tag 'm68k-for-v4.21-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Generate uapi header and syscall table header files
  m68k: Add system call table generation support
  m68k: Add __NR_syscalls along with NR_syscalls
  m68k/defconfig: Update defconfigs for v4.20-rc1
  m68k: Remove redundant 'default n' from Kconfig
  m68k: Unroll raw_outsb() loop

Pull arm64 festive updates from Will Deacon:
 "In the end, we ended up with quite a lot more than I expected:

   - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
     kernel-side support to come later)

   - Support for per-thread stack canaries, pending an update to GCC
     that is currently undergoing review

   - Support for kexec_file_load(), which permits secure boot of a kexec
     payload but also happens to improve the performance of kexec
     dramatically because we can avoid the sucky purgatory code from
     userspace. Kdump will come later (requires updates to libfdt).

   - Optimisation of our dynamic CPU feature framework, so that all
     detected features are enabled via a single stop_machine()
     invocation

   - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
     they can benefit from global TLB entries when KASLR is not in use

   - 52-bit virtual addressing for userspace (kernel remains 48-bit)

   - Patch in LSE atomics for per-cpu atomic operations

   - Custom preempt.h implementation to avoid unconditional calls to
     preempt_schedule() from preempt_enable()

   - Support for the new 'SB' Speculation Barrier instruction

   - Vectorised implementation of XOR checksumming and CRC32
     optimisations

   - Workaround for Cortex-A76 erratum #1165522

   - Improved compatibility with Clang/LLD

   - Support for TX2 system PMUS for profiling the L3 cache and DMC

   - Reflect read-only permissions in the linear map by default

   - Ensure MMIO reads are ordered with subsequent calls to Xdelay()

   - Initial support for memory hotplug

   - Tweak the threshold when we invalidate the TLB by-ASID, so that
     mremap() performance is improved for ranges spanning multiple PMDs.

   - Minor refactoring and cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits)
  arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset()
  arm64: sysreg: Use _BITUL() when defining register bits
  arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches
  arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4
  arm64: docs: document pointer authentication
  arm64: ptr auth: Move per-thread keys from thread_info to thread_struct
  arm64: enable pointer authentication
  arm64: add prctl control for resetting ptrauth keys
  arm64: perf: strip PAC when unwinding userspace
  arm64: expose user PAC bit positions via ptrace
  arm64: add basic pointer authentication support
  arm64/cpufeature: detect pointer authentication
  arm64: Don't trap host pointer auth use to EL2
  arm64/kvm: hide ptrauth from guests
  arm64/kvm: consistently handle host HCR_EL2 flags
  arm64: add pointer authentication register bits
  arm64: add comments about EC exception levels
  arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned
  arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field
  arm64: enable per-task stack canaries
  ...

Pull x86 pti updates from Thomas Gleixner:
 "No point in speculating what's in this parcel:

   - Drop the swap storage limit when L1TF is disabled so the full space
     is available

   - Add support for the new AMD STIBP always on mitigation mode

   - Fix a bunch of STIPB typos"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Add support for STIBP always-on preferred mode
  x86/speculation/l1tf: Drop the swap storage limit restriction when l1tf=off
  x86/speculation: Change misspelled STIPB to STIBP

Pull timer updates from Thomas Gleixner:
 "The timer department delivers the following christmas presents:

  Core code:

   - Use proper seqcount initializer to make lockdep happy

   - SPDX annotations and cleanup of license boilerplates

   - Use DEFINE_SHOW_ATTRIBUTE() instead of open coding it

   - Minor cleanups

  Driver code:

   - Add the sched_clock for the arc timer (Alexey Brodkin)

   - Change the file timer names for riscv, rockchip, tegra20, sun4i and
     meson6 (Daniel Lezcano)

   - Add the DT bindings for r8a7796, r8a77470 and r8a774a1 (Biju Das)

   - Remove the early platform driver registration for timer-ti-dm
     (Bartosz Golaszewski)

   - Provide the sched_clock for the riscv timer (Anup Patel)

   - Add support for ARM64 for the imx-gpt and convert the imx-tpm to
     the timer-of API (Anson Huang)

   - Remove useless irq protection for the imx-gpt (Clément Péron)

   - Remove a duplicate function name for the vt8500 (Dan Carpenter)

   - Remove obsolete inclusion of <asm/smp_twd.h> for the tegra20 (Geert
     Uytterhoeven)

   - Demote the prcmu and the custom sched_clock for the dbx500 and the
     ux500 (Linus Walleij)

   - Add a new timer clock for the RDA8810PL (Manivannan Sadhasivam)

   - Rename the macro to stick to the register name and add the delay
     timer (Martin Blumenstingl)

   - Switch the bcm2835 to the SPDX identifier (Stefan Wahren)

   - Fix the interrupt register access on the fttmr010 (Tao Ren)

   - Add missing of_node_put in the initialization path on the
     integrator-ap (Yangtao Li)"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  dt-bindings: timer: Document RDA8810PL SoC timer
  clocksource/drivers/rda: Add clock driver for RDA8810PL SoC
  clocksource/drivers/meson6: Change name meson6_timer timer-meson6
  clocksource/drivers/sun4i: Change name sun4i_timer to timer-sun4i
  clocksource/drivers/tegra20: Change name tegra20_timer to timer-tegra20
  clocksource/drivers/rockchip: Change name rockchip_timer to timer-rockchip
  clocksource/drivers/riscv: Change name riscv_timer to timer-riscv
  clocksource/drivers/riscv_timer: Provide the sched_clock
  clocksource/drivers/timer-imx-tpm: Specify clock name for timer-of
  clocksource/drivers/fttmr010: Fix invalid interrupt register access
  clocksource/drivers/integrator-ap: Add missing of_node_put()
  clocksource/drivers/bcm2835: Switch to SPDX identifier
  dt-bindings: timer: renesas, cmt: Document r8a774a1 CMT support
  clocksource/drivers/timer-imx-tpm: Convert the driver to timer-of
  clocksource/drivers/arc_timer: Utilize generic sched_clock
  dt-bindings: timer: renesas, cmt: Document r8a77470 CMT support
  dt-bindings: timer: renesas, cmt: Document r8a7796 CMT support
  clocksource/drivers/imx-gpt: Remove unnecessary irq protection
  clocksource/drivers/imx-gpt: Add support for ARM64
  clocksource/drivers/meson6_timer: Implement the ARM delay timer
  ...

Pull irq updates from Thomas Gleixner:
 "The interrupt department provides:

  Core updates:

   - Better spreading to NUMA nodes in the affinity management

   - Support for more than one set of interrupts to spread out to allow
     separate queues for separate functionality of a single device.

   - Decouple the non queue interrupts from being managed. Those are
     usually general interrupts for error handling etc. and those should
     never be shut down. This also a preparation to utilize the
     spreading mechanism for initial spreading of non-managed interrupts
     later.

   - Make the single CPU target selection in the matrix allocator more
     balanced so interrupts won't accumulate on single CPUs in certain
     situations.

   - A large spell checking patch so we don't end up fixing single typos
     over and over.

  Driver updates:

   - A bunch of new irqchip drivers (RDA8810PL, Madera, imx-irqsteer)

   - Updates for the 8MQ, F1C100s platform drivers

   - A number of SPDX cleanups

   - A workaround for a very broken GICv3 implementation on msm8996
     which sports a botched register set.

   - A platform-msi fix to prevent memory leakage

   - Various cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  genirq/affinity: Add is_managed to struct irq_affinity_desc
  genirq/core: Introduce struct irq_affinity_desc
  genirq/affinity: Remove excess indentation
  irqchip/stm32: protect configuration registers with hwspinlock
  dt-bindings: interrupt-controller: stm32: Document hwlock properties
  irqchip: Add driver for imx-irqsteer controller
  dt-bindings/irq: Add binding for Freescale IRQSTEER multiplexer
  irqchip: Add driver for Cirrus Logic Madera codecs
  genirq: Fix various typos in comments
  irqchip/irq-imx-gpcv2: Add IRQCHIP_DECLARE for i.MX8MQ compatible
  irqchip/irq-rda-intc: Fix return value check in rda8810_intc_init()
  irqchip/irq-imx-gpcv2: Silence "fall through" warning
  irqchip/gic-v3: Add quirk for msm8996 broken registers
  irqchip/gic: Add support to device tree based quirks
  dt-bindings/gic-v3: Add msm8996 compatible string
  irqchip/sun4i: Add support for Allwinner ARMv5 F1C100s
  irqchip/sun4i: Move IC specific register offsets to struct
  irqchip/sun4i: Add a struct to hold global variables
  dt-bindings: interrupt-controller: Add suniv interrupt-controller
  irqchip: Add RDA8810PL interrupt driver
  ...

Pull device properties framework updates from Rafael Wysocki:
 "This introduces 'software nodes' that are analogous to the DT and ACPI
  firmware nodes except that they can be created by drivers themselves
  and do a couple of assorted cleanups.

  Specifics:

   - Introduce "software nodes", analogous to the DT and ACPI firmware
     nodes except that they can be created by kernel code, in order to
     complement fwnodes representing real firmware nodes when they are
     incomplete (for example missing device properties) and to supply
     the primary fwnode when the firmware lacks hardware description for
     a device completely, and replace the "property_set" struct
     fwnode_handle type with software nodes (Heikki Krogerus).

   - Clean up the just introduced software nodes support and fix a
     commet in the graph-handling code (Colin Ian King, Marco Felsch)"

* tag 'devprop-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: fix fwnode_graph_get_next_endpoint() documentation
  drivers: base: swnode: remove need for a temporary string for the node name
  device property: Remove struct property_set
  device property: Move device_add_properties() to swnode.c
  drivers: base: Introducing software nodes to the firmware node framework
  ACPI / glue: Add acpi_platform_notify() function
  drivers core: Prepare support for multiple platform notifications
  driver core: platform: Remove duplicated device_remove_properties() call

Pull clk updates from Stephen Boyd:
 "This round is dominated by NXP's i.MX clk drivers. We gained support
  for two or three i.MX SoCs in here and that mostly means a lot of
  driver code and data.

  Beyond that platform, there are some new Mediatek, Amlogic, and
  Qualcomm clk drivers added in here, and then we get to the long tail
  of driver updates and non-critical fixes all around, including code
  for vendors such as Renesas, Rockchip, Nvidia, and Allwinner. Overall,
  the driver updates look normal.

  Apart from the usual driver updates we have an update to make
  registering OF based clk providers a little simpler when they're
  devices created as a child of a device backed by a node in DT. Drivers
  don't have to jump through hoops to unregister the provider upon
  driver removal anymore because the API does the right thing and uses
  the parent device DT node.

  Summary:

  Core:
   - Make devm_of_clk_add_hw_provider() use parent dt node if necessary
   - Various SPDX taggings
   - Mark clk_ops const when possible

  New Drivers:
   - NXP i.MX7ULP SoC clock support
   - NXP i.MX8QXP SoC clock support
   - NXP i.MX8MQ SoC clock support
   - NXP QorIQ T1023 SoC support
   - Qualcomm SDM845 audio subsystem clks
   - Qualcomm SDM845 GPU clck controllers
   - Qualcomm QCS404 RPM clk support
   - Mediatek MT7629 SoC clk controllers
   - Allwinner F1c100s SoC clocks
   - Allwinner H6 display engine clocks
   - Amlogic GX video clocks
   - Support for Amlogic meson8b CPU frequency scaling
   - Amlogic Meson8b CPU post-divider clocks

  Updates:
   - Proper suspend/resume on VersaClock5
   - Shrink code some with DEFINE_SHOW_ATTRIBUTE()
   - Register fixes for Rockchip rk3188 and rk3328
   - One new critical clock for Rockchip rk3188 and a fixed clock id
     (double used number)
   - New clock id for Rockchip rk3328
   - Amlogic Meson8/Meson8b video clock support
   - Amlogic got a clk-input helper and used it for the axg-audio clock
     driver
   - Sigma Delta modulation for the Allwinner A33 audio clocks
   - Support for CPEX (timer) clocks on various Renesas R-Car Gen3 and
     RZ/G2 SoCs
   - Support for SDHI HS400 clocks on early revisions of Renesas R-Car
     H3 and M3-W
   - Support for SDHI and USB clocks on Renesas RZ/A2
   - Support for RPC (SPI Multi I/O Bus Controller) clocks on Renesas
     R-Car V3M
   - Qualcomm MSM8998 GCC driver improvements (resets, drop unused clks,
     etc)"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits)
  clk: imx: imx7ulp: add arm hsrun mode clocks support
  dt-bindings: clock: imx7ulp: add HSRUN mode related clocks
  clk: Use of_node_name_eq for node name comparisons
  clk: vc5: Add suspend/resume support
  clk: qcom: Drop unused 8998 clock
  clk: qcom: Leave mmss noc on for 8998
  clk: tegra: Return the exact clock rate from clk_round_rate
  clk: tegra30: Use Tegra CPU powergate helper function
  soc/tegra: pmc: Drop SMP dependency from CPU APIs
  clk: tegra: Fix maximum audio sync clock for Tegra124/210
  clk: tegra: get rid of duplicate defines
  clk: imx: add imx8qxp lpcg driver
  clk: imx: add lpcg clock support
  clk: imx: add imx8qxp clk driver
  clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant
  clk: imx: add scu clock common part
  clk: imx: add configuration option for mmio clks
  dt-bindings: clock: add imx8qxp lpcg clock binding
  dt-bindings: clock: imx8qxp: add SCU clock IDs
  clk: qcom: Add missing msm8998 resets
  ...

Merge tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "There are several few-liners, where most of them are fixes and
  improvments. One thing standing out is ground preparation for
  inititializing trigger parameters via Device Tree.

  We introduce LED_INIT_DEFAULT_TRIGGER flag for that purpose and set it
  when default trigger is matched. It indicates that trigger should
  parse DT properties to retrieve the initialization data when set as
  default one"

* tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought after class
  led: triggers: Add LED_INIT_DEFAULT_TRIGGER flag
  led: triggers: Break the for loop after default trigger is found
  leds: pwm: Use OF variant of LED registering function
  leds: pwm: Simplify with resource-managed devm_led_classdev_register()
  leds: gpio: Drop unneeded manual of_node assignment
  leds: 88pm860x: Use of_node_name_eq for node name comparisons
  leds: powernv: add of_node_put()

Pull regmap updates from Mark Brown:
 "This has been a busy release for the regmap-irq code, there's several
  new features been added, including an API cleanup for how we specify
  types that affected one existing driver (gpio-max77620):

   - Support for hardware that flags rising and falling edges on
     separate status bits from Bartosz Golaszewski.

   - Support for explicitly clearing interrupts before unmasking from
     Bartosz Golaszewski.

   - Support for level triggered IRQs from Matti Vaittinen"

* tag 'regmap-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: irq: add an option to clear status registers on unmask
  regmap: regmap-irq/gpio-max77620: add level-irq support
  regmap: regmap-irq: Remove default irq type setting from core
  regmap: debugfs: convert to DEFINE_SHOW_ATTRIBUTE
  regmap: rbtree: convert to DEFINE_SHOW_ATTRIBUTE
  regmap: irq: handle HW using separate rising/falling edge interrupts
  regmap: add a new macro:REGMAP_IRQ_REG_LINE(_id, _reg_bits)

Pull spi updates from Mark Brown:
 "The main thing this release has been a lot of work on the integration
  with SPI NOR flashes, there's been some specific support for a while
  for controller features designed to make them perform better but it's
  not worked out as well as hoped so the interface has been redesigned
  in a way that will hopefully do better - it's already been adopted by
  a number of additional controllers so things are looking good.

  Otherwise most of the work has been driver specific:

   - Support for better integration with NOR flashes from Boris
     Brezillon and Yogesh Narayan Gaur plus usage of it in several
     drivers.

   - A big cleanup of the Rockchip driver from Emil Renner Berthing.

   - Lots of performance improvements for bcm2835 from Lukas Wunner.

   - Slave mode support for pxa2xx from Lubomir Rintel.

   - Support for Macronix MXIC, Mediatek MT7629 and MT8183, NPCM PSPI,
     and Renesas r8a77470"

* tag 'spi-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits)
  spi: sh-msiof: Reduce the number of times write to and perform the transmission from FIFO
  spi: sh-msiof: Add r8a774c0 support
  doc: lpspi: Document DT bindings for LPSPI slave mode
  spi: lpspi: Let watermark change with send data length
  spi: lpspi: Add slave mode support
  spi: lpspi: Replace all "master" with "controller"
  spi: imx: drop useless member speed_hz from driver data struct
  spi: imx: rename config callback and add useful parameters
  spi: imx: style fixes
  spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.
  spi: imx: add a device specific prepare_message callback
  mtd: atmel-quadspi: disallow building on ebsa110
  spi: Update NPCM PSPI controller documentation
  spi: npcm: Modify pspi send function
  spi: Use of_node_name_eq for node name comparisons
  spi: dw-mmio: add ACPI support
  spi: bcm2835: Synchronize with callback on DMA termination
  spi: bcm2835: Speed up FIFO access if fill level is known
  spi: bcm2835: Polish transfer of DMA prologue
  spi: spi-mem: add support for octal mode I/O data transfer
  ...

Pull regulator updates from Mark Brown:
 "This has been a very busy release for the core, some fixes, one large
  new feature and a big bit of refactoring to update the GPIO API:

   - Support for coupled regulators from Dmitry Osipenko based on a
     prior attempt by Maciej Purski, allowing us to handle situations
     where the voltages on two regulators can't be too far apart from
     each other.

   - Conversion of the GPIO support in both drivers and the core to use
     GPIO descriptors rather than numbers, part of the overall project
     to remove GPIO numbers.

   - Support for standby mode suspend states from Andrei Stefanescu.

   - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and
     Microchip MPC16502"

* tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (90 commits)
  regulator: tps65910: fix a missing check of return value
  regulator: mcp16502: Select REGMAP_I2C to fix build error
  regulator: convert to DEFINE_SHOW_ATTRIBUTE
  regulator: mcp16502: Fix missing n_voltages setting
  regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around mcp16502_suspend/resume_noirq
  regulator: mcp16502: code cleanup
  regulator: act8945a-regulator: make symbol act8945a_pm static
  drivers/regulator: fix a missing check of return value
  regulator: act8945a-regulator: fix 'defined but not used' compiler warning
  regulator: axp20x: fix set_ramp_delay for AXP209/dcdc2
  regulator: mcp16502: add support for suspend
  mfd: axp20x: use explicit bit defines
  mfd: axp20x: Clean up included headers
  regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
  dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3
  regulator: axp20x: add software based soft_start for AXP209 LDO3
  dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
  regulator: axp20x: add support for set_ramp_delay for AXP209
  mfd: axp20x: name voltage ramping define properly
  regulator: mcp16502: add regulator driver for MCP16502
  ...

Merge tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Not a lot going on this cycle.

  There's some more cleanup going on and new driver support that was not
  quite ready in time for v4.21-rc1, but here are a few fixes and
  improvements that are good to go.

  The Kona PWM driver can now be built on the Cygnus architecture and
  the i.MX driver gained support for hardware readback. Some small fixes
  are provided for the clks711x and lpc18xx-sct drivers.

  Finally, to round things off some drivers are switched to SPDX license
  identifiers"

* tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  dt-bindings: pwm: rcar: Add r8a774c0 support
  pwm: imx: Add ipg clock operation
  pwm: clps711x: Switch to SPDX identifier
  pwm: clps711x: Fix period calculation
  pwm: bcm2835: Switch to SPDX identifier
  pwm: Enable Kona PWM to be built for the Cygnus architecture
  pwm: Drop legacy wrapper for changing polarity
  pwm: imx: Implement get_state() function for hardware readout
  pwm: imx: Use bitops and bitfield macros to define register values
  pwm: imx: Sort include files
  pwm: lpc18xx-sct: Don't reconfigure PWM in .request and .free

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the 20181213 upstream
  revision, make it possible to build the ACPI subsystem without PCI
  support, and a new OEM _OSI string, add a new device support to the
  ACPI driver for AMD SoCs and fix PM handling in the ACPI driver for
  Intel SoCs, fix the SPCR table handling and do some assorted fixes and
  cleanups.

  Specifics:

   - Update the ACPICA code in the kernel to the 20181213 upstream
     revision including:
      * New Windows _OSI strings (Bob Moore, Jung-uk Kim).
      * Buffers-to-string conversions update (Bob Moore).
      * Removal of support for expressions in package elements (Bob
        Moore).
      * New option to display method/object evaluation in debug output
        (Bob Moore).
      * Compiler improvements (Bob Moore, Erik Schmauss).
      * Minor debugger fix (Erik Schmauss).
      * Disassembler improvement (Erik Schmauss).
      * Assorted cleanups (Bob Moore, Colin Ian King, Erik Schmauss).

   - Add support for a new OEM _OSI string to indicate special handling
     of secondary graphics adapters on some systems (Alex Hung).

   - Make it possible to build the ACPI subystem without PCI support
     (Sinan Kaya).

   - Make the SPCR table handling regard baud rate 0 in accordance with
     the specification of it and make the DSDT override code support
     DSDT code names generated by recent ACPICA (Andy Shevchenko, Wang
     Dongsheng, Nathan Chancellor).

   - Add clock frequency for Hisilicon Hip08 SPI controller to the ACPI
     driver for AMD SoCs (APD) (Jay Fang).

   - Fix the PM handling during device init in the ACPI driver for Intel
     SoCs (LPSS) (Hans de Goede).

   - Avoid double panic()s by clearing the APEI GHES block_status before
     panic() (Lenny Szubowicz).

   - Clean up a function invocation in the ACPI core and get rid of some
     code duplication by using the DEFINE_SHOW_ATTRIBUTE macro in the
     APEI support code (Alexey Dobriyan, Yangtao Li)"

* tag 'acpi-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
  ACPI / tables: Add an ifdef around amlcode and dsdt_amlcode
  ACPI/APEI: Clear GHES block_status before panic()
  ACPI: Make PCI slot detection driver depend on PCI
  ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set
  arm64: select ACPI PCI code only when both features are enabled
  PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset
  ACPI: Allow CONFIG_PCI to be unset for reboot
  ACPI: Move PCI reset to a separate function
  ACPI / OSI: Add OEM _OSI string to enable dGPU direct output
  ACPI / tables: add DSDT AmlCode new declaration name support
  ACPICA: Update version to 20181213
  ACPICA: change coding style to match ACPICA, no functional change
  ACPICA: Debug output: Add option to display method/object evaluation
  ACPICA: disassembler: disassemble OEMx tables as AML
  ACPICA: Add "Windows 2018.2" string in the _OSI support
  ACPICA: Expressions in package elements are not supported
  ACPICA: Update buffer-to-string conversions
  ACPICA: add comments, no functional change
  ACPICA: Remove defines that use deprecated flag
  ...

Pull power management updates from Rafael Wysocki:
 "These add sysadmin documentation for cpuidle, extend the cpuidle
  subsystem somewhat, improve the handling of performance states in the
  generic power domains (genpd) and operating performance points (OPP)
  frameworks, add a new cpufreq driver for Qualcomm SoCs, update some
  other cpufreq drivers, switch over the runtime PM framework to using
  high-res timers for device autosuspend, fix a problem with
  suspend-to-idle on ACPI-based platforms, add system-wide suspend and
  resume handling to the devfreq framework, do some janitorial cleanups
  all over and update some utilities.

  Specifics:

   - Add sysadmin documentation for cpuidle (Rafael Wysocki).

   - Make it possible to specify a cpuidle governor from kernel command
     line, add new cpuidle state sysfs attributes for governor
     evaluation, and improve the "polling" idle state handling (Rafael
     Wysocki).

   - Fix the handling of the "required-opps" DT property in the
     operating performance points (OPP) framework, improve the
     integration of it with the generic power domains (genpd) framework,
     improve the handling of performance states in them and clean up the
     idle states vs performance states separation in genpd (Viresh
     Kumar, Ulf Hansson).

   - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a
     hardware engine to control CPU frequency transitions along with DT
     bindings for it (Taniya Das).

   - Fix an intel_pstate driver issue related to CPU offline and update
     the documentation of it (Srinivas Pandruvada).

   - Clean up the imx6q cpufreq driver (Anson Huang).

   - Add SPDX license IDs to cpufreq schedutil governor files (Daniel
     Lezcano).

   - Switch over the runtime PM framework to using high-res timers for
     device autosuspend to allow the control of it to be more precise
     (Vincent Guittot).

   - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
     don't prevent the system from reaching the target low-power state
     and simplify the suspend-to-idle handling on ACPI platforms without
     full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).

   - Add system-wide suspend and resume support to the devfreq framework
     (Lukasz Luba).

   - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
     add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
     Thomas Meyer).

   - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
     macro in some places, fix some DT node refcount leaks, and do some
     other janitorial cleanups (Yangtao Li).

   - Update the cpupower, intel_pstate_tracer and turbosat utilities
     (Abhishek Goel, Doug Smythies, Len Brown)"

* tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
  PM-runtime: Switch autosuspend over to using hrtimers
  cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
  dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
  ACPI: PM: Loop in full LPS0 mode only
  ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle
  tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
  tools/power turbostat: consolidate duplicate model numbers
  tools/power turbostat: fix goldmont C-state limit decoding
  PM / Domains: Propagate performance state updates
  PM / Domains: Factorize dev_pm_genpd_set_performance_state()
  PM / Domains: Save OPP table pointer in genpd
  OPP: Don't return 0 on error from of_get_required_opp_performance_state()
  OPP: Add dev_pm_opp_xlate_performance_state() helper
  OPP: Improve _find_table_of_opp_np()
  PM / Domains: Make genpd performance states orthogonal to the idlestates
  PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
  cpuidle: Add 'above' and 'below' idle state metrics
  PM / AVS: SmartReflex: Switch to SPDX Licence ID
  PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
  ...

Pull EDAC updates from Borislav Petkov:

 - Support for ZynqMP DDR controller support to synopsys_edac along with
   a driver cleanup and generalization for the addition of support for
   the new IP. (Manish Narani)

 - Removal of the /sys/bus/edac devices hierarchy. This enabled us to
   get rid of the silly memory controllers maximum number notion. (Tony
   Luck and Borislav Petkov)

 - skx_edac improvements and fixes. (Qiuxu Zhuo and Tony Luck)

 - The usual garden variety of small cleanups and fixes.

* tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits)
  EDAC, fsl_ddr: Add LS1021A to the list of supported hardware
  EDAC, i5000: Remove set but not used local variables
  MAINTAINERS, EDAC: Drop bouncing email
  EDAC, i82975x: Fix spelling mistake "reserverd" -> "reserved"
  EDAC, fsl: Move error injection under CONFIG_EDAC_DEBUG
  EDAC, skx: Let EDAC core show the decoded result for debugfs
  EDAC, skx: Move debugfs node under EDAC's hierarchy
  EDAC, skx: Prepend hex formatting with '0x'
  EDAC, skx: Fix function calling order in skx_exit()
  EDAC: Drop per-memory controller buses
  EDAC: Don't add devices under /sys/bus/edac
  EDAC: Fix indentation issues in several EDAC drivers
  EDAC, skx: Fix randconfig builds in a better way
  EDAC, i82975x: Remove set but not used variable dtype
  EDAC, qcom_edac: Remove irq_handled local variable
  EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller
  EDAC, synopsys: Add ECC support for ZynqMP DDR controller
  EDAC, synopsys: Add macro defines for ZynqMP DDRC
  dt: bindings: Document ZynqMP DDRC in Synopsys documentation
  EDAC, synopsys: Add error handling for the of_device_get_match_data() result
  ...

Pull sound updates from Takashi Iwai:
 "There are no intensive changes in both ALSA and ASoC core parts while
  rather most of changes are a bunch of driver fixes and updates. A
  large diff pattern appears in ASoC TI part which now merges both OMAP
  and DaVinci stuff, but the rest spreads allover the places.

  Note that this pull request includes also some updates for LED trigger
  and platform drivers for mute LEDs, appearing in the diffstat as well.

  Some highlights:

  ASoC:
   - Preparatory work for merging the audio-graph and audio-graph-scu
     cards
   - A merge of TI OMAP and DaVinci directories, as both product lines
     get merged together. Also including a few architecture changes as
     well.
   - Major cleanups of the Maxim MAX9867 driver
   - Small fixes for tablets & co with Intel BYT/CHT chips
   - Lots of rsnd updates as usual
   - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
     RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx
     I2S controllers

  HD-audio:
   - Introduce audio-mute LED trigger for replacing the former hackish
     dynamic binding
   - Huawei WMI hotkey and mute LED support
   - Refactoring of PM code and display power controls
   - Headset button support in the generic jack code
   - A few updates for Tegra
   - Fixups for HP EliteBook and ASUS UX391UA
   - Lots of updates for Intel ASoC HD-audio, including the improved DSP
     detection and the fallback binding from ASoC SST to legacy HD-audio
     controller drivers

  Others:
   - Updates for FireWire TASCAM and Fireface devices, some other fixes
   - A few potential Spectre v1 fixes that are all trivial"

* tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection
  ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected
  ALSA: HDA: export process_unsol_events()
  ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294
  ALSA: bebob: fix model-id of unit for Apogee Ensemble
  ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
  ALSA: rme9652: Fix potential Spectre v1 vulnerability
  ASoC: ti: Kconfig: Remove the deprecated options
  ARM: davinci_all_defconfig: Update the audio options
  ARM: omap1_defconfig: Do not select ASoC by default
  ARM: omap2plus_defconfig: Update the audio options
  ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options
  ARM: OMAP2: Update for new MCBSP Kconfig option
  ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option
  MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support
  ASoC: ti: Merge davinci and omap directories
  ALSA: hda: add mute LED support for HP EliteBook 840 G4
  ALSA: fireface: code refactoring to handle model-specific registers
  ALSA: fireface: add support for packet streaming on Fireface 800
  ALSA: fireface: allocate isochronous resources in mode-specific implementation
  ...

Pull more media updates from Mauro Carvalho Chehab:
 "The Intel IPU3 camera driver"

* tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (23 commits)
  media: staging/ipu3-imgu: Add MAINTAINERS entry
  media: staging/ipu3-imgu: Address documentation comments
  media: v4l: Add Intel IPU3 meta buffer formats
  media: doc-rst: Add Intel IPU3 documentation
  media: ipu3-imgu: Fix firmware binary location
  media: ipu3-imgu: Fix compiler warnings
  media: staging/intel-ipu3: Add dual pipe support
  media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI
  media: staging/intel-ipu3: Add imgu top level pci device driver
  media: staging/intel-ipu3: Add v4l2 driver based on media framework
  media: staging/intel-ipu3: Add css pipeline programming
  media: staging/intel-ipu3: css: Initialize css hardware
  media: staging/intel-ipu3: css: Compute and program ccs
  media: staging/intel-ipu3: css: Add static settings for image pipeline
  media: staging/intel-ipu3: css: Add support for firmware management
  media: staging/intel-ipu3: css: Add dma buff pool utility functions
  media: staging/intel-ipu3: Implement DMA mapping functions
  media: staging/intel-ipu3: mmu: Implement driver
  media: staging/intel-ipu3: abi: Add structs
  media: staging/intel-ipu3: abi: Add register definitions and enum
  ...

Pull media updates from Mauro Carvalho Chehab:
 "First set of media patches contains:

   - Three new platform drivers: aspeed-video seco-sed and sun5i-csi;

   - One new sensor driver: imx214;

   - Support for Xbox DVD Movie Playback kit remote controller;

   - Removal of the legacy friio driver. The functionalities were ported
     to another driver, already merged;

   - New staging driver: Rockchip VPU;

   - Added license text or SPDX tags to all media documentation files;

   - Usual set of cleanup, fixes and enhancements"

* tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (263 commits)
  media: cx23885: only reset DMA on problematic CPUs
  media: ddbridge: Move asm includes after linux ones
  media: drxk_hard: check if parameter is not NULL
  media: docs: fix some GPL licensing ambiguity at the text
  media: platform: Add Aspeed Video Engine driver
  media: dt-bindings: media: Add Aspeed Video Engine binding documentation
  media: vimc: fix start stream when link is disabled
  media: v4l2-device: Link subdevices to their parent devices if available
  media: siano: Use kmemdup instead of duplicating its function
  media: rockchip vpu: remove some unused vars
  media: cedrus: don't initialize pointers with zero
  media: cetrus: return an error if alloc fails
  media: cedrus: Add device-tree compatible and variant for A64 support
  media: cedrus: Add device-tree compatible and variant for H5 support
  media: dt-bindings: media: cedrus: Add compatibles for the A64 and H5
  media: video-i2c: check if chip struct has set_power function
  media: video-i2c: support runtime PM
  media: staging: media: imx: Use of_node_name_eq for node name comparisons
  media: v4l2-subdev: document controls need _FL_HAS_DEVNODE
  media: vivid: Improve timestamping
  ...

Pull mtd updates from Boris Brezillon:
 "SPI NOR Core changes:
   - Parse the 4BAIT SFDP section
   - Add a bunch of SPI NOR entries to the flash_info table
   - Add the concept of SFDP fixups and use it to fix a bug on MX25L25635F
   - A bunch of minor cleanups/comestic changes

  NAND core changes:
   - kernel-doc miscellaneous fixes.
   - Third batch of fixes/cleanup to the raw NAND core impacting various
     controller drivers (ams-delta, marvell, fsmc, denali, tegra,
     vf610):
      * Stop to pass mtd_info objects to internal functions
      * Reorganize code to avoid forward declarations
      * Drop useless test in nand_legacy_set_defaults()
      * Move nand_exec_op() to internal.h
      * Add nand_[de]select_target() helpers
      * Pass the CS line to be selected in struct nand_operation
      * Make ->select_chip() optional when ->exec_op() is implemented
      * Deprecate the ->select_chip() hook
      * Move the ->exec_op() method to nand_controller_ops
      * Move ->setup_data_interface() to nand_controller_ops
      * Deprecate the dummy_controller field
      * Fix JEDEC detection
      * Provide a helper for polling GPIO R/B pin

  Raw NAND chip drivers changes:
   - Macronix:
      * Flag 1.8V AC chips with a broken GET_FEATURES(TIMINGS)

  Raw NAND controllers drivers changes:
   - Ams-delta:
      * Fix the error path
      * SPDX tag added
      * May be compiled with COMPILE_TEST=y
      * Conversion to ->exec_op() interface
      * Drop .IOADDR_R/W use
      * Use GPIO API for data I/O
   - Denali:
      * Remove denali_reset_banks()
      * Remove ->dev_ready() hook
      * Include <linux/bits.h> instead of <linux/bitops.h>
      * Changes to comply with the above fixes/cleanup done in the core.
   - FSMC:
      * Add an SPDX tag to replace the license text
      * Make conversion from chip to fsmc consistent
      * Fix unchecked return value in fsmc_read_page_hwecc
      * Changes to comply with the above fixes/cleanup done in the core.
   - Marvell:
      * Prevent timeouts on a loaded machine (fix)
      * Changes to comply with the above fixes/cleanup done in the core.
   - OMAP2:
      * Pass the parent of pdev to dma_request_chan() (fix)
   - R852:
      * Use generic DMA API
   - sh_flctl:
      * Convert to SPDX identifiers
   - Sunxi:
      * Write pageprog related opcodes to the right register: WCMD_SET (fix)
   - Tegra:
      * Stop implementing ->select_chip()
   - VF610:
      * Add an SPDX tag to replace the license text
      * Changes to comply with the above fixes/cleanup done in the core.
   - Various trivial/spelling/coding style fixes.

  SPI-NAND drivers changes:
   - Remove the depreacated mt29f_spinand driver from staging.
   - Add support for:
      * Toshiba TC58CVG2S0H
      * GigaDevice GD5FxGQ4xA
      * Winbond W25N01GV

  JFFS2 changes:
   - Fix a lockdep issue

  MTD changes:
   - Rework the physmap driver to merge gpio-addr-flash and physmap_of
     in it
   - Add a new compatible for RedBoot partitions
   - Make sub-partitions RW if the parent partition was RO because of a
     mis-alignment
   - Add pinctrl support to the
   - Addition of /* fall-through */ comments where appropriate
   - Various minor fixes and cleanups

  Other changes:
   - Update my email address"

* tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd: (108 commits)
  mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET
  MAINTAINERS: Update my email address
  mtd: rawnand: marvell: prevent timeouts on a loaded machine
  mtd: rawnand: omap2: Pass the parent of pdev to dma_request_chan()
  mtd: rawnand: Fix JEDEC detection
  mtd: spi-nor: Add support for is25lp016d
  mtd: spi-nor: parse SFDP 4-byte Address Instruction Table
  mtd: spi-nor: Add 4B_OPCODES flag to is25lp256
  mtd: spi-nor: Add an SPDX tag to spi-nor.{c,h}
  mtd: spi-nor: Make the enable argument passed to set_byte() a bool
  mtd: spi-nor: Stop passing flash_info around
  mtd: spi-nor: Avoid forward declaration of internal functions
  mtd: spi-nor: Drop inline on all internal helpers
  mtd: spi-nor: Add a post BFPT fixup for MX25L25635E
  mtd: spi-nor: Add a post BFPT parsing fixup hook
  mtd: spi-nor: Add the SNOR_F_4B_OPCODES flag
  mtd: spi-nor: cast to u64 to avoid uint overflows
  mtd: spi-nor: Add support for IS25LP032/064
  mtd: spi-nor: add entry for mt35xu512aba flash
  mtd: spi-nor: add macros related to MICRON flash
  ...

Pull initial i3c support from Boris Brezillon:
 "Add initial support for I3C along with two I3C master controller
  drivers"

* tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: cdns: fix I2C transfers in Cadence I3C master driver
  ic3: off by one in mode_show()
  i3c: fix an error code in i3c_master_add_i3c_dev_locked()
  i3c: master: dw: fix mask operation by using the correct operator
  MAINTAINERS: Add myself as the dw-i3c-master module maintainer
  dt-binding: i3c: Document Synopsys DesignWare I3C
  i3c: master: Add driver for Synopsys DesignWare IP
  i3c: master: Remove set but not used variable 'old_i3c_scl_lim'
  dt-bindings: i3c: Document Cadence I3C master bindings
  i3c: master: Add driver for Cadence IP
  MAINTAINERS: Add myself as the I3C subsystem maintainer
  dt-bindings: i3c: Document core bindings
  i3c: Add sysfs ABI spec
  docs: driver-api: Add I3C documentation
  i3c: Add core I3C infrastructure

Pull drm updates from Dave Airlie:
 "Core:
   - shared fencing staging removal
   - drop transactional atomic helpers and move helpers to new location
   - DP/MST atomic cleanup
   - Leasing cleanups and drop EXPORT_SYMBOL
   - Convert drivers to atomic helpers and generic fbdev.
   - removed deprecated obj_ref/unref in favour of get/put
   - Improve dumb callback documentation
   - MODESET_LOCK_BEGIN/END helpers

  panels:
   - CDTech panels, Banana Pi Panel, DLC1010GIG,
   - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
   - Himax HX8357D, simulated RTSM AEMv8.
   - GPD Win2 panel
   - AUO G101EVN010

  vgem:
   - render node support

  ttm:
   - move global init out of drivers
   - fix LRU handling for ghost objects
   - Support for simultaneous submissions to multiple engines

  scheduler:
   - timeout/fault handling changes to help GPU recovery
   - helpers for hw with preemption support

  i915:
   - Scaler/Watermark fixes
   - DP MST + powerwell fixes
   - PSR fixes
   - Break long get/put shmemfs pages
   - Icelake fixes
   - Icelake DSI video mode enablement
   - Engine workaround improvements

  amdgpu:
   - freesync support
   - GPU reset enabled on CI, VI, SOC15 dGPUs
   - ABM support in DC
   - KFD support for vega12/polaris12
   - SDMA paging queue on vega
   - More amdkfd code sharing
   - DCC scanout on GFX9
   - DC kerneldoc
   - Updated SMU firmware for GFX8 chips
   - XGMI PSP + hive reset support
   - GPU reset
   - DC trace support
   - Powerplay updates for newer Polaris
   - Cursor plane update fast path
   - kfd dma-buf support

  virtio-gpu:
   - add EDID support

  vmwgfx:
   - pageflip with damage support

  nouveau:
   - Initial Turing TU104/TU106 modesetting support

  msm:
   - a2xx gpu support for apq8060 and imx5
   - a2xx gpummu support
   - mdp4 display support for apq8060
   - DPU fixes and cleanups
   - enhanced profiling support
   - debug object naming interface
   - get_iova/page pinning decoupling

  tegra:
   - Tegra194 host1x, VIC and display support enabled
   - Audio over HDMI for Tegra186 and Tegra194

  exynos:
   - DMA/IOMMU refactoring
   - plane alpha + blend mode support
   - Color format fixes for mixer driver

  rcar-du:
   - R8A7744 and R8A77470 support
   - R8A77965 LVDS support

  imx:
   - fbdev emulation fix
   - multi-tiled scalling fixes
   - SPDX identifiers

  rockchip
   - dw_hdmi support
   - dw-mipi-dsi + dual dsi support
   - mailbox read size fix

  qxl:
   - fix cursor pinning

  vc4:
   - YUV support (scaling + cursor)

  v3d:
   - enable TFU (Texture Formatting Unit)

  mali-dp:
   - add support for linear tiled formats

  sun4i:
   - Display Engine 3 support
   - H6 DE3 mixer 0 support
   - H6 display engine support
   - dw-hdmi support
   - H6 HDMI phy support
   - implicit fence waiting
   - BGRX8888 support

  meson:
   - Overlay plane support
   - implicit fence waiting
   - HDMI 1.4 4k modes

  bridge:
   - i2c fixes for sii902x"

* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits)
  drm/amd/display: Add fast path for cursor plane updates
  drm/amdgpu: Enable GPU recovery by default for CI
  drm/amd/display: Fix duplicating scaling/underscan connector state
  drm/amd/display: Fix unintialized max_bpc state values
  Revert "drm/amd/display: Set RMX_ASPECT as default"
  drm/amdgpu: Fix stub function name
  drm/msm/dpu: Fix clock issue after bind failure
  drm/msm/dpu: Clean up dpu_media_info.h static inline functions
  drm/msm/dpu: Further cleanups for static inline functions
  drm/msm/dpu: Cleanup the debugfs functions
  drm/msm/dpu: Remove dpu_irq and unused functions
  drm/msm: Make irq_postinstall optional
  drm/msm/dpu: Cleanup callers of dpu_hw_blk_init
  drm/msm/dpu: Remove unused functions
  drm/msm/dpu: Remove dpu_crtc_is_enabled()
  drm/msm/dpu: Remove dpu_crtc_get_mixer_height
  drm/msm/dpu: Remove dpu_dbg
  drm/msm: dpu: Remove crtc_lock
  drm/msm: dpu: Remove vblank_requested flag from dpu_crtc
  drm/msm: dpu: Separate crtc assignment from vblank enable
  ...

Pull x86 platform driver updates from Andy Shevchenko:

 - The USB Power Delivery discrete components now can be enumerated by
   i2c-multi-instantiate driver via several resources under single ACPI
   device node (ACPI ID is INT3515).

 - Touchscreen support is added for the Mediacom Flexbook Edge 11.

 - Mellanox driver got fixed due to updates in their firmware.

 - The power management stub driver for AtomISP v2 is fixed in order to
   support Intel Baytrail SoCs where same quirk is needed for S0ix to
   work.

 - Special key handling has been fixed for Favorites hotkey on Thinkpad,
   and Screen LOCK on ASUS.

 - Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been
   updated to support this.

 - Few cleanups related to debugfs have been made in Intel IPS and Intel
   PMC drivers. Besides that Intel PMC has been extended to show more
   detailed information about Latency Tolerance

* tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86: (41 commits)
  platform/x86: mlx-platform: Convert to use SPDX identifier
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Allow mlxreg-io driver activation for new systems
  platform/x86: mlx-platform: Fix LED configuration
  platform/x86: mlx-platform: Fix tachometer registers
  platform/x86: mlx-platform: Rename new systems product names
  platform/x86: mlx-platform: Add definitions for new registers
  platform/x86: intel_telemetry: convert to DEFINE_SHOW_ATTRIBUTE
  platform/x86: intel_pmc_core: convert to DEFINE_SHOW_ATTRIBUTE
  platform/x86: thinkpad_acpi: Cleanup quirks macros
  platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11
  platform/x86: Fix config space access for intel_atomisp2_pm
  platform/x86: Add the VLV ISP PCI ID to atomisp2_pm
  platform/x86: intel_ips: Convert to use DEFINE_SHOW_ATTRIBUTE macro
  platform/x86: intel_ips: Remove never happen condition
  platform/x86: intel_ips: NULL check before some freeing functions is not needed
  platform/x86: intel_ips: remove unnecessary checks in ips_debugfs_init
  iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  ACPI / scan: Create platform device for INT3515 ACPI nodes
  platform/x86: i2c-multi-instantiate: Allow to have same slaves
  ...

Document RZ/G2E (R8A774C0) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

i.MX PWM module's ipg_clk_s is for PWM register access, on most of i.MX
SoCs, this ipg_clk_s is from system ipg clock or perclk which is always
enabled, but on i.MX7D, the ipg_clk_s is from PWM1_CLK_ROOT which is
controlled by CCGR132, that means the CCGR132 MUST be enabled first
before accessing PWM registers on i.MX7D. This patch adds ipg clock
operation to make sure register access successfully on i.MX7D and it
fixes Linux kernel boot up hang during PWM driver probe.

Fixes: 4a23e6ee

 ("ARM: dts: imx7d-sdb: Restore pwm backlight support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>