Before calling blk_mq_map_queues(), the mq_map and nr_queues belonging to
struct blk_mq_queue_map must have a valid value.

If nr_queues is set to 0, the system may encounter a divide by zero
depending on the type of architecture.

    blk_mq_map_queues() -> queue_index()

Link: https://lore.kernel.org/r/1891546521.01644873481638.JavaMail.epsvc@epcpadp4


Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When connected point to point, the driver does not know the FC4's supported
by the other end. In Fabrics, it can query the nameserver.  Thus the driver
must send PRLIs for the FC4s it supports and enable support based on the
acc(ept) or rej(ect) of the respective FC4 PRLI.  Currently the driver
supports SCSI and NVMe PRLIs.

Unfortunately, although the behavior is per standard, many devices have
come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI
is properly RJT'd but the target decided that it must LOGO after seeing the
unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is
now in an infinite failure loop.

Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI
accept or reject status across logout as long as the link stays "up".  When
retrying login, if the prior NVMe PRLI was rejected, it will not be sent on
the next login.

Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com


Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This fixes a deadlock added with commit b40f3894 ("scsi: qedi: Complete
TMF works before disconnect")

Bug description from Jia-Ju Bai:

qedi_process_tmf_resp()
  spin_lock(&session->back_lock); --> Line 201 (Lock A)
  spin_lock(&qedi_conn->tmf_work_lock); --> Line 230 (Lock B)

qedi_process_cmd_cleanup_resp()
  spin_lock_bh(&qedi_conn->tmf_work_lock); --> Line 752 (Lock B)
  spin_lock_bh(&conn->session->back_lock); --> Line 784 (Lock A)

When qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp() are
concurrently executed, the deadlock can occur.

This patch fixes the deadlock by not holding the tmf_work_lock in
qedi_process_cmd_cleanup_resp while holding the back_lock. The
tmf_work_lock is only needed while we remove the tmf_work from the
work_list.

Link: https://lore.kernel.org/r/20220208185448.6206-1-michael.christie@oracle.com
Fixes: b40f3894

 ("scsi: qedi: Complete TMF works before disconnect")
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Messages around firmware download were incorrectly tagged as being related
to discovery trace events. Thus, firmware download status ended up dumping
the trace log as well as the firmware update message. As there were a
couple of log messages in this state, the trace log was dumped multiple
times.

Resolve this by converting from trace events to SLI events.

Link: https://lore.kernel.org/r/20220207180442.72836-1-jsmart2021@gmail.com


Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The driver is initiating NVMe PRLIs to determine device NVMe support.  This
should not be occurring if CONFIG_NVME_FC support is disabled.

Correct this by changing the default value for FC4 support. Currently it
defaults to FCP and NVMe. With change, when NVME_FC support is not enabled
in the kernel, the default value is just FCP.

Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com


Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The hisi_sas_slot.is_internal member is not set properly for ATA commands
which the driver sends directly. A TMF struct pointer is normally used as a
test to set this, but it is NULL for those commands. It's not ideal, but
pass an empty TMF struct to set that member properly.

Link: https://lore.kernel.org/r/1643627607-138785-1-git-send-email-john.garry@huawei.com
Fixes: dc313f6b

 ("scsi: hisi_sas: Factor out task prep and delivery code")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently a use-after-free may occur if a sas_task is aborted by the upper
layer before we handle the I/O completion in mpi_ssp_completion() or
mpi_sata_completion().

In this case, the following are the two steps in handling those I/O
completions:

 - Call complete() to inform the upper layer handler of completion of
   the I/O.

 - Release driver resources associated with the sas_task in
   pm8001_ccb_task_free() call.

When complete() is called, the upper layer may free the sas_task. As such,
we should not touch the associated sas_task afterwards, but we do so in the
pm8001_ccb_task_free() call.

Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering.

Link: https://lore.kernel.org/r/1643289172-165636-4-git-send-email-john.garry@huawei.com


Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently a use-after-free may occur if a TMF sas_task is aborted before we
handle the IO completion in mpi_ssp_completion(). The abort occurs due to
timeout.

When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the
sas_task is freed in pm8001_exec_internal_tmf_task().

However, if the I/O completion occurs later, the I/O completion still
thinks that the sas_task is available. Fix this by clearing the ccb->task
if the TMF times out - the I/O completion handler does nothing if this
pointer is cleared.

Link: https://lore.kernel.org/r/1643289172-165636-3-git-send-email-john.garry@huawei.com


Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

make W=1 complains of an undescribed function parameter:

drivers/scsi/pm8001/pm80xx_hwi.c:3938: warning: Function parameter or member 'circularQ' not described in 'process_one_iomb'

Fix it.

Link: https://lore.kernel.org/r/1643289172-165636-2-git-send-email-john.garry@huawei.com


Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We currently use ->cmd_per_lun as initial queue depth for setting up the
budget_map. Martin Wilck reported that it is common for the queue_depth to
be subsequently updated in slave_configure() based on detected hardware
characteristics.

As a result, for some drivers, the static host template settings for
cmd_per_lun and can_queue won't actually get used in practice. And if the
default values are used to allocate the budget_map, memory may be consumed
unnecessarily.

Fix the issue by reallocating the budget_map after ->slave_configure()
returns. At that time the device queue_depth should accurately reflect what
the hardware needs.

Link: https://lore.kernel.org/r/20220127153733.409132-1-ming.lei@redhat.com


Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Martin Wilck <martin.wilck@suse.com>
Suggested-by: Martin Wilck <martin.wilck@suse.com>
Tested-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Running tests with a debug kernel shows that bnx2fc_recv_frame() is
modifying the per_cpu lport stats counters in a non-mpsafe way.  Just boot
a debug kernel and run the bnx2fc driver with the hardware enabled.

[ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_
[ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G    B
[ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 1391.699183] Call Trace:
[ 1391.699188]  dump_stack_lvl+0x57/0x7d
[ 1391.699198]  check_preemption_disabled+0xc8/0xd0
[ 1391.699205]  bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc]
[ 1391.699215]  ? do_raw_spin_trylock+0xb5/0x180
[ 1391.699221]  ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc]
[ 1391.699229]  ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc]
[ 1391.699240]  bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc]
[ 1391.699250]  ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc]
[ 1391.699258]  kthread+0x364/0x420
[ 1391.699263]  ? _raw_spin_unlock_irq+0x24/0x50
[ 1391.699268]  ? set_kthread_struct+0x100/0x100
[ 1391.699273]  ret_from_fork+0x22/0x30

Restore the old get_cpu/put_cpu code with some modifications to reduce the
size of the critical section.

Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com
Fixes: d576a5e8

 ("bnx2fc: Improve stats update mechanism")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Current code handles completions for SATA devices in mpi_sata_completion()
and mpi_sata_event().

However, at the time when any SATA event happens, for almost all the event
types, the command is still in the target. It is therefore incorrect to
complete the task in sata_event().

There are some events for which we get sata_completions, some need recovery
procedure and others abort. All the tasks must be completed via
sata_completion() path.

Removed the task done related code from sata_events().  For tasks where we
don't get completions, let top layer call abort() to abort the command post
timeout.

Link: https://lore.kernel.org/r/20220124082255.86223-1-Ajish.Koshy@microchip.com


Acked-by: Jack Wang <jinpu.wang@ionos.com>
Co-developed-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails
with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and
crash the kernel.

[    1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A
[    1.105872] myrs 0000:00:03.0: Failed to initialize Controller
[    1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.110774] Call Trace:
[    1.110950]  myrs_cleanup+0xe4/0x150 [myrs]
[    1.111135]  myrs_probe.cold+0x91/0x56a [myrs]
[    1.111302]  ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs]
[    1.111500]  local_pci_probe+0x48/0x90

Link: https://lore.kernel.org/r/20220123225717.1069538-1-ztong0001@gmail.com


Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pointer SCp is being re-assigned the same value that it was initialized to
a few lines earlier, the assignment is redundant and can be removed.

Link: https://lore.kernel.org/r/20220123175530.110462-1-colin.i.king@gmail.com


Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This event is raised when link is lost as specified in UFSHCI spec and that
means communication is not possible. Thus initializing UFS interface needs
to be done.

Make UFS driver considers Link Lost as fatal in the INT_FATAL_ERRORS
mask. This will trigger a host reset whenever a link lost interrupt occurs.

Link: https://lore.kernel.org/r/1642743475-54275-1-git-send-email-kwmad.kim@samsung.com


Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The return value of ufshcd_set_dev_pwr_mode() is passed to device PM
core. However, the function currently returns a SCSI result which the PM
core doesn't understand.  This might lead to unexpected behaviors in
userland; a platform reset was observed in Android.

Use a generic error code for SSU failures.

Link: https://lore.kernel.org/r/1642743182-54098-1-git-send-email-kwmad.kim@samsung.com


Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL. So, if it fails, the 32-bit case will also fail
for the same reason.

Simplify code and remove some dead code accordingly.

[1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t

Link: https://lore.kernel.org/r/5663cef9b54004fa56cca7ce65f51eadfc3ecddb.1642238127.git.christophe.jaillet@wanadoo.fr


Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL. So, if it fails, the 32-bit case will also fail
for the same reason.

Simplify code and remove some dead code accordingly.

[1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t

Link: https://lore.kernel.org/r/1bf2d3660178b0e6f172e5208bc0bd68d31d9268.1642237482.git.christophe.jaillet@wanadoo.fr


Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

As stated in [1], dma_set_mask() with a 64-bit mask never fails if
dev->dma_mask is non-NULL. So, if it fails, the 32-bit case will also fail
for the same reason.

Simplify code and remove some dead code accordingly.

[1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t

Link: https://lore.kernel.org/r/dbbe8671ca760972d80f8d35f3170b4609bee368.1642236763.git.christophe.jaillet@wanadoo.fr


Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The bnx2fc_destroy() functions are removing the interface before calling
destroy_work. This results multiple WARNings from sysfs_remove_group() as
the controller rport device attributes are removed too early.

Replace the fcoe_port's destroy_work queue. It's not needed.

The problem is easily reproducible with the following steps.

Example:

  $ dmesg -w &
  $ systemctl enable --now fcoe
  $ fipvlan -s -c ens2f1
  $ fcoeadm -d ens2f1.802
  [  583.464488] host2: libfc: Link down on port (7500a1)
  [  583.472651] bnx2fc: 7500a1 - rport not created Yet!!
  [  583.490468] ------------[ cut here ]------------
  [  583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0'
  [  583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80
  [  583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ...
  [  583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1
  [  583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
  [  584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc]
  [  584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80
  [  584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ...
  [  584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282
  [  584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000
  [  584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0
  [  584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00
  [  584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400
  [  584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004
  [  584.355379] FS:  0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000
  [  584.394419] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [  584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0
  [  584.454888] Call Trace:
  [  584.466108]  device_del+0xb2/0x3e0
  [  584.481701]  device_unregister+0x13/0x60
  [  584.501306]  bsg_unregister_queue+0x5b/0x80
  [  584.522029]  bsg_remove_queue+0x1c/0x40
  [  584.541884]  fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc]
  [  584.573823]  process_one_work+0x1e3/0x3b0
  [  584.592396]  worker_thread+0x50/0x3b0
  [  584.609256]  ? rescuer_thread+0x370/0x370
  [  584.628877]  kthread+0x149/0x170
  [  584.643673]  ? set_kthread_struct+0x40/0x40
  [  584.662909]  ret_from_fork+0x22/0x30
  [  584.680002] ---[ end trace 53575ecefa942ece ]---

Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com
Fixes: 0cbf32e1

 ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks")
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Co-developed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Suppose we have an environment with a number of non-NPIV FCP devices
(virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical
FCP channel (HBA port) and its I_T nexus. Plus a number of storage target
ports zoned to such shared channel. Now one target port logs out of the
fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port
recovery depending on the ADISC result. This happens on all such FCP
devices (in different Linux images) concurrently as they all receive a copy
of this RSCN. In the following we look at one of those FCP devices.

Requests other than FSF_QTCB_FCP_CMND can be slow until they get a
response.

Depending on which requests are affected by slow responses, there are
different recovery outcomes. Here we want to fix failed recoveries on port
or adapter level by avoiding recovery requests that can be slow.

We need the cached N_Port_ID for the remote port "link" test with ADISC.
Just before sending the ADISC, we now intentionally forget the old cached
N_Port_ID. The idea is that on receiving an RSCN for a port, we have to
assume that any cached information about this port is stale.  This forces a
fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for
the same port. Since we typically can still communicate with the nameserver
efficiently, we now reach steady state quicker: Either the nameserver still
does not know about the port so we stop recovery, or the nameserver already
knows the port potentially with a new N_Port_ID and we can successfully and
quickly perform open port recovery.  For the one case, where ADISC returns
successfully, we re-initialize port->d_id because that case does not
involve any port recovery.

This also solves a problem if the storage WWPN quickly logs into the fabric
again but with a different N_Port_ID. Such as on virtual WWPN takeover
during target NPIV failover.
[https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the
RSCN from the storage FDISC was ignored by zfcp and we could not
successfully recover the failover. On some later failback on the storage,
we could have been lucky if the virtual WWPN got the same old N_Port_ID
from the SAN switch as we still had cached.  Then the related RSCN
triggered a successful port reopen recovery.  However, there is no
guarantee to get the same N_Port_ID on NPIV FDISC.

Even though NPIV-enabled FCP devices are not affected by this problem, this
code change optimizes recovery time for gone remote ports as a side effect.
The timely drop of cached N_Port_IDs prevents unnecessary slow open port
attempts.

While the problem might have been in code before v2.6.32 commit
799b76d0 ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix
depends on the gid_pn_work introduced with that commit, so we mark it as
culprit to satisfy fix dependencies.

Note: Point-to-point remote port is already handled separately and gets its
N_Port_ID from the cached peer_d_id. So resetting port->d_id in general
does not affect PtP.

Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com
Fixes: 799b76d0

 ("[SCSI] zfcp: Decouple gid_pn requests from erp")
Cc: <stable@vger.kernel.org> #2.6.32+
Suggested-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

According to the comment in check_fw_ready() we should not check the
IOP1_READY field in register SCRATCH_PAD_1 for 8008 or 8009 controllers.

However we check this very field in process_oq() for processing the highest
index interrupt vector. The highest interrupt vector is checked as the FW
is programmed to signal fatal errors through this irq.

Change that function to not check IOP1_READY for those mentioned
controllers, but do check ILA_READY in both cases.

The reason I assume that this was not hit earlier was because we always
allocated 64 MSI(X), and just did not pass the vector index check in
process_oq(), i.e.  the handler never ran for vector index 63.

Link: https://lore.kernel.org/r/1642508105-95432-1-git-send-email-john.garry@huawei.com


Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

If FCoE is not configured, libfc/libfcoe keeps on retrying FLOGI and after
3 retries driver does a context reset and tries fipvlan again.  This leads
to context reset message flooding the logs. Hence ratelimit the message to
prevent flooding the logs.

Link: https://lore.kernel.org/r/20220117135311.6256-4-njavali@marvell.com


Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Hung task call trace was seen during LOGO processing.

[  974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued...
[  974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0
[  974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET
[  974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1.
[  974.309625] host1: rport 016900: Received LOGO request while in state Ready
[  974.309627] host1: rport 016900: Delete port
[  974.309642] host1: rport 016900: work event 3
[  974.309644] host1: rport 016900: lld callback ev 3
[  974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush.
[  974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success...
[  984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds.
[  984.031136]       Not tainted 4.18.0-305.el8.x86_64 #1

[  984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  984.031209] jbd2/dm-15-8    D    0  7645      2 0x80004080
[  984.031212] Call Trace:
[  984.031222]  __schedule+0x2c4/0x700
[  984.031230]  ? unfreeze_partials.isra.83+0x16e/0x1a0
[  984.031233]  ? bit_wait_timeout+0x90/0x90
[  984.031235]  schedule+0x38/0xa0
[  984.031238]  io_schedule+0x12/0x40
[  984.031240]  bit_wait_io+0xd/0x50
[  984.031243]  __wait_on_bit+0x6c/0x80
[  984.031248]  ? free_buffer_head+0x21/0x50
[  984.031251]  out_of_line_wait_on_bit+0x91/0xb0
[  984.031257]  ? init_wait_var_entry+0x50/0x50
[  984.031268]  jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2]
[  984.031280]  kjournald2+0xbd/0x270 [jbd2]
[  984.031284]  ? finish_wait+0x80/0x80
[  984.031291]  ? commit_timeout+0x10/0x10 [jbd2]
[  984.031294]  kthread+0x116/0x130
[  984.031300]  ? kthread_flush_work_fn+0x10/0x10
[  984.031305]  ret_from_fork+0x1f/0x40

There was a ref count issue when LOGO is received during TMF. This leads to
one of the I/Os hanging with the driver. Fix the ref count.

Link: https://lore.kernel.org/r/20220117135311.6256-3-njavali@marvell.com


Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Call trace seen when creating NPIV ports, only 32 out of 64 show online.
stag work was not initialized for vport, hence initialize the stag work.

WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80
CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE    --------- --
 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021
Workqueue: events fc_lport_timeout [libfc]
RIP: 0010:__queue_delayed_work+0x68/0x80
Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81
f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb
c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23
RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006
RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002
RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788
RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750
R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58
R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18
FS:  0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
  queue_delayed_work_on+0x36/0x40
  qedf_elsct_send+0x57/0x60 [qedf]
  fc_lport_enter_flogi+0x90/0xc0 [libfc]
  fc_lport_timeout+0xb7/0x140 [libfc]
  process_one_work+0x1a7/0x360
  ? create_worker+0x1a0/0x1a0
  worker_thread+0x30/0x390
  ? create_worker+0x1a0/0x1a0
  kthread+0x116/0x130
  ? kthread_flush_work_fn+0x10/0x10
  ret_from_fork+0x35/0x40
 ---[ end trace 008f00f722f2c2ff ]--

Initialize stag work for all the vports.

Link: https://lore.kernel.org/r/20220117135311.6256-2-njavali@marvell.com


Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

devm_kstrdup() returns pointer to allocated string on success, NULL on
failure. So it is better to check the return value of it.

Link: https://lore.kernel.org/r/tencent_4257E15D4A94FF9020DDCC4BB9B21C041408@qq.com


Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

iscsit_tpg_check_network_portal() has nested for_each loops and is supposed
to return true when a match is found. However, the tpg loop will still
continue after existing the tpg_np loop. If this tpg_np is not the last the
match value will be changed.

Break the outer loop after finding a match and make sure the np under each
tpg is unique.

Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn


Signed-off-by: ZouMingzhe <mingzhe.zou@easystack.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

GFP_KERNEL/GFP_DMA can't be used under a spin lock. According the comment,
els_ios_lock is used to protect els ios list so we can move down the spin
lock to avoid using this flag under the lock.

Link: https://lore.kernel.org/r/20220111012441.3232527-1-yangyingliang@huawei.com
Fixes: 8f406ef7

 ("scsi: elx: libefc: Extended link Service I/O handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Fix printing 'phys_addr' in 'perf script'.

 - Fix failure to add events with 'perf probe' in ppc64 due to not
   removing leading dot (ppc64 ABIv1).

 - Fix cpu_map__item() python binding building.

 - Support event alias in form foo-bar-baz, add pmu-events and
   parse-event tests for it.

 - No need to setup affinities when starting a workload or attaching to
   a pid.

 - Use path__join() to compose a path instead of ad-hoc snprintf()
   equivalent.

 - Override attr->sample_period for non-libpfm4 events.

 - Use libperf cpumap APIs instead of accessing the internal state
   directly.

 - Sync x86 arch prctl headers and files changed by the new
   set_mempolicy_home_node syscall with the kernel sources.

 - Remove duplicate include in cpumap.h.

 - Remove redundant err variable.

* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kern...

Pull ftrace fix from Steven Rostedt:
 "Fix s390 breakage from sorting mcount tables.

  The latest merge of the tracing tree sorts the mcount table at build
  time. But s390 appears to do things differently (like always) and
  replaces the sorted table back to the original unsorted one. As the
  ftrace algorithm depends on it being sorted, bad things happen when it
  is not, and s390 experienced those bad things.

  Add a new config to tell the boot if the mcount table is sorted or
  not, and allow s390 to opt out of it"

* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix assuming build time sort works for s390

To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.

Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.

Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/

Fixes: 72b3942a

 ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage

 - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH

 - Fix build errors in certs/Makefile

* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
  certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
  Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
  usr/include/Makefile: add linux/nfc.h to the compile-test coverage

Pull bitmap updates from Yury Norov:

 - introduce for_each_set_bitrange()

 - use find_first_*_bit() instead of find_next_*_bit() where possible

 - unify for_each_bit() macros

* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
  vsprintf: rework bitmap_list_string
  lib: bitmap: add performance test for bitmap_print_to_pagebuf
  bitmap: unify find_bit operations
  mm/percpu: micro-optimize pcpu_is_populated()
  Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
  find: micro-optimize for_each_{set,clear}_bit()
  include/linux: move for_each_bit() macros from bitops.h to find.h
  cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
  tools: sync tools/bitmap with mother linux
  all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
  cpumask: use find_first_and_bit()
  lib: add find_first_and_bit()
  arch: remove GENERIC_FIND_FIRST_BIT entirely
  include: move find.h from asm_generic to linux
  bitops: move find_bit_*_le functions from le.h to find.h
  bitops: protect find_first_{,zero}_bit properly

Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn


Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a test which allows us to test parsing an event alias with hyphens.

Since these events typically do not exist on most host systems, add the
alias to the fake pmu.

Function perf_pmu__test_parse_init() has terms added to match known test
aliases.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.

The HiSilicon D06 platform has events in such form:

  $ ./perf list sdir-home-migrate

  List of pre-defined events (to be used in -e):

  uncore hha:
    sdir-home-migrate
   [Unit: hisi_sccl,hha]

  $ sudo ./perf stat -e sdir-home-migrate
  event syntax error: 'sdir-home-migrate'
                          \___ parser error
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

   -e, --event <event>event selector. use 'perf list' to list available events

To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.

Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.

Before said patch:

  perf record -c 10000 -e arm_spe_0// -- sleep 1

Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.

This patch restores the previous behaviour for non-libpfm4 events.

Fixes: ae5dcc8a

 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Remove all but the first include of stdbool.h from cpumap.h.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn


Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>